Eiki LMP101 projector lamp
The Eiki LMP101 takes lamp LV-LP28, a 318 W lamp rated for 1,500 hours. It comes as a complete module, with the bulb already fitted in its housing. The same lamp is also sold under 3 other part numbers, all listed below. It fits 5 Eiki models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Eiki LMP101.
| Code | Used by |
|---|---|
LV-LP28 | Eiki original part number |
003-120188-01 | Equivalent code |
610-328-7362 | Equivalent code |
POA-LMP101 | Equivalent code |
The code printed on your old lamp or its housing should match one of the codes listed above. Eiki and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the LMP101, the same lamp is the correct part.
Which lamp does the Eiki LMP101 take?
The Eiki LMP101 uses LV-LP28, also sold as 003-120188-01, 610-328-7362, POA-LMP101.
Should I buy the bare bulb or the module?
This model's lamp is sold as a complete module: the bulb comes fitted in its housing, so you replace the whole unit in one piece.
How long does the LMP101 lamp last?
LV-LP28 is rated for 1,500 hours at 318 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Eiki projectors?
Yes. The same lamp also fits the Eiki LC-71DL, the Eiki LC-X71, the Eiki LC-X71D, the Eiki LC-X71L.