Eiki LC-HDT10 projector lamp
The Eiki LC-HDT10 takes lamp POA-LMP72 / 610-305-1130, a 250 W lamp rated for 1,500 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Eiki and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Eiki LC-HDT10 take?
The Eiki LC-HDT10 uses POA-LMP72 / 610-305-1130, also sold as 610 305 1130, 610-305-1130, POA-LMP72.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the LC-HDT10 lamp last?
POA-LMP72 is rated for 1,500 hours at 250 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Eiki projectors?
Yes. The same lamp also fits the Eiki LC-HDT10D, the Eiki LMP72.