Dukane Imagepro 8109W projector lamp
The Dukane Imagepro 8109W takes lamp DT01411 / 456-8109W, a 250 W lamp rated for 5,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Dukane and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Dukane Imagepro 8109W take?
The Dukane Imagepro 8109W uses DT01411 / 456-8109W.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the Imagepro 8109W lamp last?
DT01411 is rated for 5,000 hours at 250 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Dukane projectors?
Yes. The same lamp also fits the Dukane 456-8109, the Dukane 456-8109W, the Dukane ImagePro 8109, the Dukane Imagepro 8115, the Dukane ImagePro 8120WI, the Dukane ImagePro 8120WIA and other Dukane models listed on this page.