Dukane Image Pro 8922H projector lamp
The Dukane Image Pro 8922H takes lamp DT01021 / 456-8755J, a 190 W lamp rated for 3,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Dukane and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Dukane Image Pro 8922H take?
The Dukane Image Pro 8922H uses DT01021 / 456-8755J, also sold as 456-8755J, 456-8954H, CPX2010LAMP, 78-6972-0008-3, DT01025, DT01021.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the Image Pro 8922H lamp last?
DT01021 is rated for 3,000 hours at 190 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Dukane projectors?
Yes. The same lamp also fits the Dukane Image Pro 8755J, the Dukane Image Pro 8919H, the Dukane Image Pro 8920H, the Dukane Image Pro 8924HW-RJ, the Dukane Image Pro 8924W-RJ, the Dukane Image Pro 8954H and other Dukane models listed on this page.