Digital Projection iVISION 20-WUXGA-XB projector lamp
The Digital Projection iVISION 20-WUXGA-XB takes lamp Projection 105-495, a 220 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Digital and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Digital Projection iVISION 20-WUXGA-XB take?
The Digital Projection iVISION 20-WUXGA-XB uses Projection 105-495, also sold as Projection 109-688, Projection 105-495.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the Projection iVISION 20-WUXGA-XB lamp last?
Projection 105-495 is rated for 2,000 hours at 220 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Digital projectors?
Yes. The same lamp also fits the Digital Projection 124BN41, the Digital Projection iVISION 20-1080P-XB, the Digital Projection iVISION 20-1080P-XC, the Digital Projection iVISION 20-1080P-XL, the Digital Projection iVISION 20-WUXGA-XC, the Digital Projection iVISION 20-WUXGA-XL and other Digital models listed on this page.