Cineversum BlackWing Three MK2013 projector lamp
The Cineversum BlackWing Three MK2013 takes lamp R599820, a 230 W lamp rated for 3,000 hours. It comes as a complete module, with the bulb already fitted in its housing. It fits 4 Cineversum models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Cineversum BlackWing Three MK2013.
| Code | Used by |
|---|---|
R599820 | Cineversum original part number |
The code printed on your old lamp or its housing should match one of the codes listed above. Cineversum and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the BlackWing Three MK2013, the same lamp is the correct part.
Which lamp does the Cineversum BlackWing Three MK2013 take?
The Cineversum BlackWing Three MK2013 uses R599820.
Should I buy the bare bulb or the module?
This model's lamp is sold as a complete module: the bulb comes fitted in its housing, so you replace the whole unit in one piece.
How long does the BlackWing Three MK2013 lamp last?
R599820 is rated for 3,000 hours at 230 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Cineversum projectors?
Yes. The same lamp also fits the Cineversum BlackWing Essential MK2013, the Cineversum BlackWing One MK2013, the Cineversum BlackWing Two MK2013.