Christie CSP70-D100U projector lamp
The Christie CSP70-D100U takes lamp 03-240088-02P . It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing. It fits 9 Christie models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Christie CSP70-D100U.
| Code | Used by |
|---|---|
03-240088-02P | Christie original part number |
The code printed on your old lamp or its housing should match one of the codes listed above. Christie and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the CSP70-D100U, the same lamp is the correct part.
Which lamp does the Christie CSP70-D100U take?
The Christie CSP70-D100U uses 03-240088-02P.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the CSP70-D100U lamp last?
Rated life depends on the lamp mode you run and how the projector is ventilated; the lamp's own page lists the figure where the manufacturer publishes one.
Does the same lamp fit other Christie projectors?
Yes. The same lamp also fits the Christie CS50RPMS, the Christie CS70-D1000U, the Christie CS70RPMS, the Christie CSP70RPMS, the Christie GXCS70D-100U, the Christie GXRPMSD100U and other Christie models listed on this page.