Boxlight ProjectorWrite2 projector lamp
The Boxlight ProjectorWrite2 takes lamp SEATTLEX30N-930, a 230 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Boxlight and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Boxlight ProjectorWrite2 take?
The Boxlight ProjectorWrite2 uses SEATTLEX30N-930, also sold as Seattle X26N-930 (SHP).
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the ProjectorWrite2 lamp last?
SEATTLEX30N-930 is rated for 2,000 hours at 230 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Boxlight projectors?
Yes. The same lamp also fits the Boxlight Projector Write 2, the Boxlight Projector Write 2/W, the Boxlight ProjectoWrite2, the Boxlight Seattle X26N, the Boxlight Seattle X26N (SHP), the Boxlight SEATTLE X30N and other Boxlight models listed on this page.