Barco OV-513 projector lamp
The Barco OV-513 takes lamp R9842020 / R764225 . It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing. The same lamp is also sold under 4 other part numbers, all listed below. It fits 25 Barco models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Barco OV-513.
| Code | Used by |
|---|---|
R9842020 | Barco original part number |
R764225 | Barco original part number |
R764225 | Equivalent code |
R764454 | Equivalent code |
R9842440 | Equivalent code |
R9842020 | Equivalent code |
The code printed on your old lamp or its housing should match one of the codes listed above. Barco and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the OV-513, the same lamp is the correct part.
Which lamp does the Barco OV-513 take?
The Barco OV-513 uses R9842020 / R764225, also sold as R764225, R764454, R9842440, R9842020.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the OV-513 lamp last?
Rated life depends on the lamp mode you run and how the projector is ventilated; the lamp's own page lists the figure where the manufacturer publishes one.
Does the same lamp fit other Barco projectors?
Yes. The same lamp also fits the Barco CDG80-DL, the Barco CDR50DL, the Barco CDR67DL, the Barco CDR+67DL, the Barco CDR+80DL, the Barco MDR50 and other Barco models listed on this page.