Acer S1313W projector lamp
The Acer S1313W takes lamp MC.JEL11.001 . It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing. It fits 8 Acer models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Acer S1313W.
| Code | Used by |
|---|---|
MC.JEL11.001 | Acer original part number |
The code printed on your old lamp or its housing should match one of the codes listed above. Acer and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the S1313W, the same lamp is the correct part.
Which lamp does the Acer S1313W take?
The Acer S1313W uses MC.JEL11.001.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the S1313W lamp last?
Rated life depends on the lamp mode you run and how the projector is ventilated; the lamp's own page lists the figure where the manufacturer publishes one.
Does the same lamp fit other Acer projectors?
Yes. The same lamp also fits the Acer S1110, the Acer S1210Hn, the Acer S1213, the Acer S1213Hn, the Acer S1310W, the Acer S1310WHn and other Acer models listed on this page.