3M EP8790LK projector lamp
The 3M EP8790LK takes lamp PRJ-RLC-005 / 78-6969-9601-2, a 275 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. 3M and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the 3M EP8790LK take?
The 3M EP8790LK uses PRJ-RLC-005 / 78-6969-9601-2, also sold as 456-238, 78-6969-9601-2, DT00531, ZU 0289 04 4010, ZU0289044010, PRJ-RLC-005.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the EP8790LK lamp last?
PRJ-RLC-005 is rated for 2,000 hours at 275 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other 3M projectors?
Yes. The same lamp also fits the 3M MP8790.