3M Digital Media System 710 projector lamp
The 3M Digital Media System 710 takes lamp 78-6969-9881-0 / DMS700 . It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. 3M and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the 3M Digital Media System 710 take?
The 3M Digital Media System 710 uses 78-6969-9881-0 / DMS700, also sold as DMS700, DMS710, 78-6969-9881-0.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the Digital Media System 710 lamp last?
Rated life depends on the lamp mode you run and how the projector is ventilated; the lamp's own page lists the figure where the manufacturer publishes one.
Does the same lamp fit other 3M projectors?
Yes. The same lamp also fits the 3M Digital Media System 700, the 3M S7003M, the 3M S7103M.