{"title":"Video7 projector lamps","description":"\u003cp\u003eReplacement projector lamps for Video7 projectors — 15 lamps catalogued. Available as bare lamps (the bulb alone, fitted into the housing already in your projector) and as complete modules (bulb and housing together, ready to drop straight in).\u003c\/p\u003e\u003cp\u003eEvery lamp carries a genuine Philips, Osram or Ushio burner, ships free worldwide, and is covered by a 180-day guarantee. If you are not sure which your projector takes, check the code on the old lamp or send us a photo of the label.\u003c\/p\u003e","products":[{"product_id":"sp-83601-001-projector-lamp-module","title":"SP.83601.001 projector lamp with module","description":"\u003cp\u003eFew lamps cover as many rebadged projectors as SP.83601.001: it fits the Acer PD720, eleven Optoma EP750\/EP753\/EP755\/H50\/H55\/H56 and EzPro variants, the Studio Experience CINEMA 17SF, three Themescene models and two Video7 units. All eighteen share the same optical engine under different brand names, so one 200W module serves them all.\u003c\/p\u003e\u003cp\u003eThe same lamp is also sold as BL-FU200A, and under the labels Experience BL-FU200A and Experience SP.83601.001, all referring to the identical 200W, 2000-hour module. Because this lamp was distributed under so many brand names, checking your exact projector model against the list above matters more here than usual.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10973\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 18 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do so many different brands share this lamp?\u003c\/strong\u003e\u003cbr\u003eOptoma manufactured this projector chassis for several resellers, so Acer, Studio, Themescene and Video7 all sold versions of the same hardware under their own names, sharing the same lamp module throughout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs BL-FU200A the same as SP.83601.001?\u003c\/strong\u003e\u003cbr\u003eYes, BL-FU200A is an alternative code for the identical lamp module, as are the Experience-branded versions of both numbers, so any of the four should bring up this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWithin Optoma's range, which model names appear on the SP.83601.001 list?\u003c\/strong\u003e\u003cbr\u003eIt fits the EP750, EP750H, EP753, EP753H, EP755, EzPro 750, EzPro 753, EzPro 755, H50, H55 and H56, eleven Optoma model names that all share this same module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wattage and rated life of SP.83601.001?\u003c\/strong\u003e\u003cbr\u003eIt is a 200W bulb rated for 2000 hours, fitted inside its own housing as part of this module, regardless of which branded projector it is fitted to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eI have a Themescene or Video7 projector, not Optoma. Does this still fit?\u003c\/strong\u003e\u003cbr\u003eYes. The Themescene H50, H55 and H56 and the Video7 PD753 and PD755 are the same hardware as their Optoma equivalents and take the identical lamp module without any modification.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182595551468,"sku":"LA-10973","price":139.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28431-xl.png?v=1786959109"},{"product_id":"bl-fu200a-projector-lamp","title":"BL-FU200A bare projector lamp","description":"\u003cp\u003eFive different brands rebadged this same 200-watt bulb: Acer, Optoma, Studio Experience, Themescene and Video7 all sold home-cinema projectors built around it. Rated for 2,000 hours, it is supplied as a bare bulb, so it is fitted into your projector's existing housing rather than replacing that housing outright.\u003c\/p\u003e\u003cp\u003eThe same lamp also appears as SP.83601.001, and under the Studio Experience brand as 'Experience BL-FU200A' and 'Experience SP.83601.001', so match any of these against your old bulb. With 18 projector models across five brands, confirm your exact model, for example Optoma's EP750 or Acer's PD720, rather than assuming any similarly named lamp will fit.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 18 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do Acer, Optoma and other brands share the same lamp?\u003c\/strong\u003e\u003cbr\u003eIt was common for projector makers to buy lamp assemblies from the same manufacturer and badge them under their own model names, which is why BL-FU200A turns up across Acer, Optoma, Studio Experience, Themescene and Video7 projectors. The bulb inside is the same regardless of the badge on the projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other part numbers should I check for this lamp?\u003c\/strong\u003e\u003cbr\u003eBesides BL-FU200A, we also list this lamp as SP.83601.001, Experience BL-FU200A and Experience SP.83601.001. If your old lamp shows any of these instead, it is the same bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I find my exact projector model among 18 options?\u003c\/strong\u003e\u003cbr\u003eLook for a model label on your projector, typically on the rear panel or base, and compare it against the brand-by-brand list on this page. Given how many models share this lamp, matching the precise model, such as Optoma EP750 versus EP753, matters more than matching the brand alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp a full module or a bare bulb?\u003c\/strong\u003e\u003cbr\u003eIt is a bare bulb, without a housing, so it fits inside the housing your projector already has. Keep your original housing when you remove the old lamp, since this bulb is designed to go into it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check on my housing before fitting this bulb?\u003c\/strong\u003e\u003cbr\u003eLook for cracks in the plastic, a damaged or loose socket, and any scorch marks around the old bulb's contact points. A bare bulb will not resolve problems caused by a faulty housing, so it is worth checking before you fit the new lamp.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182598435052,"sku":"LA-08011","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lamp-e320x-projector-lamp","title":"LAMP-E320X bare projector lamp","description":"\u003cp\u003eLAMP-E320X is the bare bulb specified for the Video7 PD320X, a projector also sold by Xerox as the DP1015. Only these two models are confirmed for this fitment, and the lamp goes into your projector's existing housing rather than arriving as a complete assembly.\u003c\/p\u003e\u003cp\u003eWe list only one code for this lamp, so LAMP-E320X is the number to check for regardless of whether your unit carries the Video7 or Xerox badge. Before fitting, let the projector cool fully and note how the old bulb sits in its housing so the replacement goes in the same way. Shipping is free worldwide.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10532\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy is a Xerox projector using a Video7 part number?\u003c\/strong\u003e\u003cbr\u003eXerox sold the DP1015 as a rebadged version of Video7's PD320X, so the two share identical internal parts including this lamp. LAMP-E320X is the number we use for both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a full module version of LAMP-E320X available?\u003c\/strong\u003e\u003cbr\u003eNo, we only stock this fitment as a bare bulb. Both the PD320X and DP1015 use a housing that this bulb is designed to fit into directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other part numbers for this lamp I should look for?\u003c\/strong\u003e\u003cbr\u003eWe list this fitment only as LAMP-E320X. If another source quotes a different code for a PD320X or DP1015 lamp, confirm the exact model before treating it as the same part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my projector is a genuine Video7 PD320X or the Xerox-badged version?\u003c\/strong\u003e\u003cbr\u003eCheck the rating label or badge on the unit itself; either way, both take the identical LAMP-E320X bulb, so the badge doesn't change which lamp you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before removing the old bulb from a PD320X or DP1015?\u003c\/strong\u003e\u003cbr\u003eMake sure the projector has been switched off and left to cool, then note the orientation of the existing bulb in its housing so the new one seats the same way when it goes in.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182620586220,"sku":"LA-10532","price":288.37,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23367-lg.png?v=1786957025"},{"product_id":"ec-j0201-001-projector-lamp","title":"EC.J0201.001 bare projector lamp","description":"\u003cp\u003eEC.J0201.001 is a 120-watt bare bulb with a 2,000-hour rating, fitted across a notably wide spread of brands: the Acer PD321, NEC LT10 range, Nobo X11P, Optoma EP725 and EzPro 725, the Video7 PD725X, and the Viewsonic PJ225D and PJ255D.\u003c\/p\u003e\u003cp\u003eSeveral other codes describe the same bulb, including BL-FP120C, LT10LP, PRJ-RLC-010 and SP.86801.001, all of which can appear on the original lamp depending on the brand printed on your projector. Since this is a bare bulb, it is fitted inside your existing housing rather than sold with one of its own.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow can one bulb serve Acer, NEC and Optoma projectors alike?\u003c\/strong\u003e\u003cbr\u003eManufacturers often source the same underlying lamp for related models and rebrand it under their own codes. EC.J0201.001, BL-FP120C, LT10LP, PRJ-RLC-010 and SP.86801.001 all refer to the identical bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit the NEC LT10J?\u003c\/strong\u003e\u003cbr\u003eYes. EC.J0201.001 is listed as compatible with the NEC LT10, LT10G and LT10J, alongside the Acer PD321, Nobo X11P, Optoma EP725 and EzPro 725, Video7 PD725X, and Viewsonic PJ225D and PJ255D.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete module or a bulb only?\u003c\/strong\u003e\u003cbr\u003eIt is a bare bulb only. You will need to open your existing lamp housing, replace the bulb inside it, and refit the housing to your projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat figures should I expect from the LT10LP-class bulb?\u003c\/strong\u003e\u003cbr\u003eIt runs at 120 watts and is rated for 2,000 hours, which gives a rough guide for when a replacement is likely to be due on any of the compatible models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm I need LT10LP rather than a different lamp?\u003c\/strong\u003e\u003cbr\u003eCheck the part number printed on your existing bulb or housing. If it reads LT10LP, EC.J0201.001, BL-FP120C, PRJ-RLC-010 or SP.86801.001, this bare lamp is the correct match.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182624780524,"sku":"LA-08001","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32632-lg.png?v=1786962168"},{"product_id":"v7-pjd512-lamp-projector-lamp-module","title":"V7-PJD512-LAMP projector lamp with module","description":"\u003cp\u003eVideo7's V7-PJD512-LAMP is a complete lamp-with-module fitting both the PJD512 and the PJD512-E5. The bulb comes fitted inside its housing, so this listing replaces the whole assembly in one go rather than expecting you to reuse your existing housing at all.\u003c\/p\u003e\u003cp\u003eBecause this part covers two Video7 models, check whether your projector reads PJD512 or PJD512-E5 before ordering, since both share the same lamp module. If your current housing is intact and only the bulb has failed, it's worth checking whether a bare lamp version exists for your model rather than defaulting to this module.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10536\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes V7-PJD512-LAMP fit both the PJD512 and the PJD512-E5?\u003c\/strong\u003e\u003cbr\u003eYes, this part number is listed against both models, so either projector takes this same module. There's no need to order a different part depending on which of the two you own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the housing included with this part?\u003c\/strong\u003e\u003cbr\u003eYes, this is a complete module, meaning the bulb is already fitted inside a new housing rather than sold as a bare bulb, so there's nothing further to transfer from your old housing before fitting it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I choose a module over a bare lamp?\u003c\/strong\u003e\u003cbr\u003eA module is the right choice if your existing housing is cracked, discoloured, or its connector has failed, since it replaces the housing along with the bulb rather than relying on your current one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit this module into a PJD512?\u003c\/strong\u003e\u003cbr\u003eIt slides into the lamp bay as a single unit and secures with the same fixings as the original assembly. Check your PJD512 manual for the exact panel location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill my PJD512 need a lamp hours reset after fitting?\u003c\/strong\u003e\u003cbr\u003eMany projectors prompt for this from an on-screen menu once the new module is detected. Check your Video7 manual for the specific steps, as the exact wording of this option can differ between Video7 models.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182629695724,"sku":"LA-10536","price":178.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"v7-pjd512-lamp-projector-lamp","title":"V7-PJD512-LAMP bare projector lamp","description":"\u003cp\u003eThis bare lamp shares its part number, V7-PJD512-LAMP, with Video7's module listing, but here the bulb is supplied on its own rather than fitted inside a housing. It covers the same two projectors, the PJD512 and the PJD512-E5, so it's suitable when your existing housing is still working properly.\u003c\/p\u003e\u003cp\u003eChoose this bare version rather than the module if your PJD512 or PJD512-E5 housing shows no cracking and its connector still seats properly, since fitting a bare bulb means reusing that housing as is. If the housing itself needs replacing, the module listing under the same part number is the better option.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10535\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between this and the module listing?\u003c\/strong\u003e\u003cbr\u003eBoth share the part number V7-PJD512-LAMP, but this listing is the bulb alone, fitted into your existing housing, while the module version includes a new housing too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit the PJD512-E5 as well as the standard PJD512?\u003c\/strong\u003e\u003cbr\u003eYes, both models are listed against this part number, so this bare lamp fits either. There's no separate listing to search for depending on which of the two projectors you have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit a bare lamp into a PJD512?\u003c\/strong\u003e\u003cbr\u003eOpen the lamp door, release the old bulb from its housing, and seat the new bulb the same way before closing up. Let the projector cool down first, since this area runs hot in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I check my housing before ordering a bare lamp?\u003c\/strong\u003e\u003cbr\u003eYes, it's worth checking for cracks or a loose connector, since a bare lamp is fitted into your current housing rather than replacing it. A damaged housing means the module version would suit you better than this bare bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs V7-PJD512-LAMP an original Video7 part number?\u003c\/strong\u003e\u003cbr\u003eIt's the code we list this lamp under, matched to fit the PJD512 and PJD512-E5. We describe it by the fit it's built for rather than making claims about branding.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182630449388,"sku":"LA-10535","price":144.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"j150041-projector-lamp","title":"J150041 bare projector lamp","description":"\u003cp\u003eThe Video7 PD520X takes part J150041 when its bulb needs replacing, a bare lamp supplying the bulb and burner without a housing attached. Quoting this part number when you order is the surest way to get the matching bulb, since it's specific to the PD520X rather than shared across other Video7 models.\u003c\/p\u003e\u003cp\u003eAs a bare lamp, J150041 is fitted into the housing your PD520X already has, so it's the right choice when that housing and its connector are still sound. Where the housing itself is cracked or the connector no longer seats properly, a bare lamp on its own won't resolve that.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10533\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does part J150041 fit?\u003c\/strong\u003e\u003cbr\u003eIt's listed against the Video7 PD520X specifically. Quoting this part number when ordering confirms you're getting the bulb built for that model rather than one built for a different Video7 projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes buying the J150041 also get me a fresh cage for the PD520X?\u003c\/strong\u003e\u003cbr\u003eNo, J150041 is a bare lamp, bulb only, fitted into the housing already inside your PD520X. A new housing isn't part of this listing, so your existing one needs to be in sound condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs J150041 ever cross-referenced under another Video7 code?\u003c\/strong\u003e\u003cbr\u003eJ150041 is the only code recorded against this listing. If another code has been quoted to you for what looks like the same lamp, check it against the PD520X model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit J150041 into my PD520X?\u003c\/strong\u003e\u003cbr\u003eOpen the lamp access panel, release the old bulb from its housing, and fit the replacement in the same position, then close the panel and power on to confirm it starts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PD520X need its lamp counter reset?\u003c\/strong\u003e\u003cbr\u003eMany projectors prompt for this from an on-screen menu once a new lamp is detected. Check your PD520X manual for the specific menu path, as the steps can differ from other Video7 models.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182631465196,"sku":"LA-10533","price":174.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27710-lg.png?v=1786959016"},{"product_id":"ec-j0201-001-projector-lamp-module","title":"EC.J0201.001 projector lamp with module","description":"\u003cp\u003eAs a complete module, EC.J0201.001 pairs a 120-watt bulb with its own housing, rated for 2,000 hours. It fits the same wide spread of projectors as the bare version: the Acer PD321, NEC LT10 range, Nobo X11P, Optoma EP725 and EzPro 725, Video7 PD725X, and Viewsonic PJ225D and PJ255D.\u003c\/p\u003e\u003cp\u003eThis module is also known by the codes BL-FP120C, LT10LP, PRJ-RLC-010 and SP.86801.001, all describing the same part across different brands. Choosing the module rather than the bare bulb means you do not need to open your existing lamp housing; you simply fit the whole replacement unit.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10751\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eShould I choose the module or the bare bulb version of EC.J0201.001?\u003c\/strong\u003e\u003cbr\u003eChoose the module if your existing housing is worn or damaged, since it replaces both the bulb and housing together. Choose the bare bulb if your housing is still in good condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this module fit the Video7 PD725X?\u003c\/strong\u003e\u003cbr\u003eYes, this module is listed as compatible with the Video7 PD725X, alongside the Acer PD321, NEC LT10 range, Nobo X11P, Optoma EP725 and EzPro 725, and Viewsonic PJ225D and PJ255D.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other codes describe this same module?\u003c\/strong\u003e\u003cbr\u003eThe same lamp module is also listed as BL-FP120C, LT10LP, PRJ-RLC-010 and SP.86801.001, in addition to EC.J0201.001, across the various brands and models it fits including NEC and Viewsonic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit this module into a Viewsonic projector?\u003c\/strong\u003e\u003cbr\u003ePower down the projector, open the lamp access panel, remove the old module as a complete unit, and fit this one in its place, securing it as the original was fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated wattage and hours for this module?\u003c\/strong\u003e\u003cbr\u003eIt runs at 120 watts and carries a 2,000-hour rating, which serves as a general guide for when replacement is likely to be needed on any of the projectors it fits.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182633824492,"sku":"LA-10751","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25894-xl.png?v=1786958655"},{"product_id":"raven-930-projector-lamp-module","title":"RAVEN-930 projector lamp with module","description":"\u003cp\u003eThe Boxlight RAVEN and RAVENXB000, alongside the SP-650z and XD-680z models, share the RAVEN-930 lamp with Medion's MD32980, the Premier HE-S480, Video7's PD480C, PD600S and PD611X, and the Xerox DP820, eleven projectors in all across five brands. It runs at 200 watts with a 2,000-hour rated life and comes complete with its housing.\u003c\/p\u003e\u003cp\u003eThe only other reference for this lamp is P1643-0014, which some manuals list alongside RAVEN-930 for the same part. Because this is a complete module, the old lamp and housing come out together and this new one takes its place, without any need to transfer the bulb into a separate housing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11873\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 11 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich brands share the RAVEN-930 lamp?\u003c\/strong\u003e\u003cbr\u003eBoxlight, Medion, Premier, Video7 and Xerox each sell a projector built around this lamp, covering eleven models in total, from the Boxlight RAVEN to the Xerox DP820.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage and rated hours does RAVEN-930 carry?\u003c\/strong\u003e\u003cbr\u003eIt runs at 200 watts with a 2,000-hour rated life, figures that hold across every one of the five brands and eleven projector models on the compatibility list above.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs P1643-0014 a different lamp to RAVEN-930?\u003c\/strong\u003e\u003cbr\u003eNo, P1643-0014 is an alternative code for the same part, used in place of RAVEN-930 in some manuals, so either reference points to the identical lamp module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do the Boxlight SP-650z and Xerox DP820 take the same lamp?\u003c\/strong\u003e\u003cbr\u003eThese projectors, though sold under different brand names, are built on the same underlying design, so the lamp and its housing are identical between them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering RAVEN-930 for my projector?\u003c\/strong\u003e\u003cbr\u003eConfirm the exact model printed on your projector, such as RAVEN, RAVENXB000, SP-650z or XD-680z for Boxlight, or the equivalent Medion, Premier, Video7 or Xerox model, against the list above.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182643130604,"sku":"LA-11873","price":53.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/37887-xl.png?v=1786965836"},{"product_id":"xd680z-930-projector-lamp","title":"XD680Z-930 Bare Projector Lamp","description":"\u003cp\u003eFew lamps on this list span as many brands as XD680Z-930, a 200 watt, 2000 hour bare bulb used across projectors from Acer, Boxlight, Medion, Premier, Video7, Viewsonic and Xerox, fourteen models in total. It also carries several alternative codes, including RLC-001, RAVEN-930, SP650Z-930, P1643-0014 and EC.J0302.001.\u003c\/p\u003e\u003cp\u003eWith this many brands and codes attached to one lamp, check the exact model printed on your projector rather than the brand alone; a Boxlight XD-680z, a Viewsonic PJ402 and an Acer PD113 can all take this same bulb. As a bare lamp it fits inside your existing housing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-07988\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 14 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp cover so many different brands?\u003c\/strong\u003e\u003cbr\u003eSeveral projector manufacturers rebadged the same underlying hardware, so the Boxlight, Viewsonic, Medion, Premier, Video7, Xerox and Acer models listed here all share an identical bulb despite carrying different names.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs RLC-001 the same lamp as XD680Z-930?\u003c\/strong\u003e\u003cbr\u003eYes, RLC-001 is one of several alternative codes recorded for this lamp, alongside RAVEN-930, SP650Z-930, P1643-0014 and EC.J0302.001, which all refer to the identical bare bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit the Boxlight XD-680z+?\u003c\/strong\u003e\u003cbr\u003eYes, along with the standard XD-680z, the RAVEN, the SD-650z and the SP-650z, all from Boxlight's range of rebadged projectors that share this identical lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 'Image' prefix mean on some of the alternative codes?\u003c\/strong\u003e\u003cbr\u003eIt appears against several of the cross-reference numbers we list for this lamp; we record it as shown in the source data rather than interpret what it denotes for each brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Xerox DP 820 really use the same lamp as an Acer projector?\u003c\/strong\u003e\u003cbr\u003eYes, the Xerox DP 820 is listed as compatible with XD680Z-930, the same bare bulb used in the Acer PD113 and several other brands' models.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182656958700,"sku":"LA-07988","price":53.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32450-lg.png?v=1786960468"},{"product_id":"sp48z-930-projector-lamp","title":"SP48Z-930 bare projector lamp","description":"\u003cp\u003eFive brands, eight projectors, one lamp: SP48Z-930 fits the Acer PD111 and PL111, the Boxlight SP-48z and XP-58z, the Kindermann KS150 and KX150, the Video7 PL701X and the Vision PRO280. Rated at 180 watts with a stated 2000 hour life, it is supplied here as a bare bulb.\u003c\/p\u003e\u003cp\u003eThis lamp is also catalogued under the code 7781, so either reference should match the part sold here. As a bare bulb, SP48Z-930 needs an existing, undamaged housing to go into; given how many brands rebadge this same lamp, check your projector's own model number carefully against the list above rather than relying on the brand name alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 180 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-07985\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do so many different brands use the same lamp?\u003c\/strong\u003e\u003cbr\u003eBoxlight, Kindermann, Video7, Vision and Acer projectors listed here were built around the same lamp engine, which is why SP48Z-930 fits all eight models despite the different brand names.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the code 7781 refer to?\u003c\/strong\u003e\u003cbr\u003e7781 is an alternative reference for the same lamp sold here as SP48Z-930. Either code should identify the correct bulb for your projector, regardless of which one appears on your existing unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp a bare bulb or a complete module?\u003c\/strong\u003e\u003cbr\u003eThis listing is a bare bulb only, so it needs to be fitted into your projector's existing housing rather than replacing the housing itself, which should already be in place from the original lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated wattage and lamp life for SP48Z-930?\u003c\/strong\u003e\u003cbr\u003eSP48Z-930 is rated at 180 watts with a stated life of 2000 hours, figures that apply across all eight projectors this lamp fits, from the Acer models through to the Vision PRO280.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Boxlight and Kindermann models take this lamp?\u003c\/strong\u003e\u003cbr\u003eSP48Z-930 fits the Boxlight SP-48z and XP-58z, as well as the Kindermann KS150 and KX150, alongside models from Acer, Video7 and Vision, making it one of the more widely shared lamp codes in this range.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182661349612,"sku":"LA-07985","price":471.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"xd17k-930-projector-lamp-module","title":"XD17K-930 projector lamp with module","description":"\u003cp\u003eThe XD17K-930 is a complete lamp and housing unit built around a 130-watt bulb rated for 2000 hours of use. It is listed against 21 projectors from eleven brands, including Acer, Dell, Optoma, Sharp and Viewsonic, so the same lamp assembly turns up under several different badges depending on who sold the projector.\u003c\/p\u003e\u003cp\u003eThis part carries several alternative codes across the brands it serves, among them 310-1705, BL-FP130A, BQCPGM15X, EC.J0101.001, RLC-130-07A and SP.83401.001, so check whichever number is printed on your old lamp door or projector label against this list before ordering. Because this listing includes the housing, no disassembly of an old cage is needed; the new unit fits straight in.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 130 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10805\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 21 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich projectors use the XD17K-930 lamp?\u003c\/strong\u003e\u003cbr\u003eIt is listed against 21 models across eleven brands, including the Acer PD310, PD320 and XD-17K, the Dell 3200MP, the Optoma EP730 and EzPro 730, and the Viewsonic PJ350. The same lamp assembly is sold under different brand names because these projectors share a common design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the lamp with the housing or a bare bulb?\u003c\/strong\u003e\u003cbr\u003eThis listing is for the lamp with module, meaning the bulb is already fitted inside its housing and cage. You remove the old assembly from the projector and fit this one in its place, so no separate handling of a bare bulb is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other part numbers match this lamp?\u003c\/strong\u003e\u003cbr\u003eThe XD17K-930 is also sold as 310-1705, BL-FP130A, BQCPGM15X, EC.J0101.001, RLC-130-07A, SP.83401.001, 310-2328, 3100MP and 730-10994, depending on which projector brand it was fitted to originally. Any of these codes on your old lamp door confirms this is the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the bulb inside last?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 2000 hours of use at 130 watts. Actual life depends on how the projector is run, including whether it is used in a high-brightness mode and how well ventilated the installation is.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat claim is being made when the XD17K-930 is described as 'original'?\u003c\/strong\u003e\u003cbr\u003eWe use the term to mean the lamp module carries the same part number and specification as fitted by the projector manufacturer at the time of sale, rather than a rebuilt or repackaged unit. It is not a statement about who made the bulb inside.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182663315692,"sku":"LA-10805","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/33191-xl.png?v=1786962281"},{"product_id":"video7-pd760x-projector-lamp","title":"PD760X bare projector lamp","description":"\u003cp\u003eOwners of the Video7 PD760X can fit this bare lamp when the bulb needs replacing, since it supplies the burner alone rather than a complete housing. There's no part number recorded against this listing, so we catalogue it by the projector it's built for, meaning your PD760X's model name confirms the fit.\u003c\/p\u003e\u003cp\u003eSince it's a bare lamp, this listing relies on your PD760X's own housing being in working order, with the new bulb fitted into that same cage and connector. Before ordering, check your projector's model badge reads PD760X, and look over your current housing for cracks or damage around the connector.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10534\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAm I getting a cage with this PD760X bulb, or the glass alone?\u003c\/strong\u003e\u003cbr\u003eThe glass alone. This is a bare lamp meant to fit inside your PD760X's existing housing rather than replace it, so a working cage and connector on your current unit are assumed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is there no part number on this listing?\u003c\/strong\u003e\u003cbr\u003eThis lamp isn't recorded under a published part code, so it's listed by the projector it fits instead, the Video7 PD760X, meaning your projector's model name is what confirms you've found the right listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit this bulb into the PD760X?\u003c\/strong\u003e\u003cbr\u003eOpen the lamp compartment, remove the old bulb from its housing, and fit the new one the same way before closing the panel. Allow the projector to cool first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PD760X need a lamp hours reset?\u003c\/strong\u003e\u003cbr\u003eMany projectors offer this through an on-screen menu once a new lamp is fitted. Check your PD760X manual for the exact steps, since the menu wording can vary between projector generations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I'm not sure whether my housing needs replacing too?\u003c\/strong\u003e\u003cbr\u003eLook for cracking, discolouration or a loose connector on your current housing. If it looks sound, a bare lamp like this one should be all you need.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182682026220,"sku":"LA-10534","price":174.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"video7-pl900x-projector-lamp","title":"PL900X bare projector lamp","description":"\u003cp\u003ePL900X owners needing a replacement bulb can fit this bare lamp, which supplies just the burner rather than a full housing assembly. No part number is attached to this listing, so it's catalogued by projector model, PL900X, which is the detail to check against your own unit before ordering.\u003c\/p\u003e\u003cp\u003eFitting this bare lamp assumes your PL900X's existing housing and connector are in good order, since the listing replaces the bulb only. Check your projector's model badge reads PL900X exactly before ordering, and inspect the housing for cracking or a loose connector beforehand.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10537\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor the PL900X, does this order cover the bulb only or the bulb plus cage?\u003c\/strong\u003e\u003cbr\u003eBulb only. It's designed to fit into the housing already installed in your PL900X, so a sound existing housing and connector are needed for it to fit correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the PL900X is my exact model?\u003c\/strong\u003e\u003cbr\u003eCheck the model printed on the projector body, or look in the on-screen system menu, and match it to PL900X before ordering, since this listing is catalogued against that specific model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tools do I need to fit this lamp?\u003c\/strong\u003e\u003cbr\u003eMost projector lamp doors open with a screwdriver or a simple catch release, and the bulb itself lifts free of its housing without further tools. Check your PL900X manual for the panel location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill I need to reset a lamp counter?\u003c\/strong\u003e\u003cbr\u003eMany projectors offer a reset from the on-screen menu once a new lamp is fitted. Check the PL900X manual for the exact steps, as this varies by model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this lamp in a different Video7 model?\u003c\/strong\u003e\u003cbr\u003eThis listing is catalogued specifically for the PL900X, so it's best matched to that model rather than assumed to fit other Video7 projectors, even where model names look similar.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182682091756,"sku":"LA-10537","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"video7-pd230x-projector-lamp","title":"PD230X bare projector lamp","description":"\u003cp\u003eThe Video7 PD230X takes this bare lamp when its bulb needs replacing, with the burner supplied alone and no housing included in the listing. There's no manufacturer part code attached, so we identify this lamp by the projector it's built for, meaning PD230X is what confirms the fit.\u003c\/p\u003e\u003cp\u003eBecause this is a bare lamp, it's intended for a PD230X whose existing housing and connector are still working, since the listing swaps the bulb only rather than the surrounding assembly. Check your projector's model reads PD230X exactly, and look over the housing for cracks before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10531\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the housing part of this listing?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare lamp, bulb only, built to fit inside the housing already in your PD230X, with no new housing supplied as part of this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't there a part code for this lamp?\u003c\/strong\u003e\u003cbr\u003eThis particular lamp isn't listed under a published manufacturer number, so we catalogue it by the projector it fits, the PD230X, instead; matching your projector's model name is therefore what confirms fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit this bulb myself?\u003c\/strong\u003e\u003cbr\u003eOpen the lamp panel on your PD230X, remove the old bulb from its housing, and fit the new one in the same position before closing up and testing the projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PD230X need a lamp hours reset?\u003c\/strong\u003e\u003cbr\u003eMany projectors offer this from an on-screen menu once a new lamp is fitted. Check your PD230X manual for the exact menu path, as the steps differ across projector ranges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I'm ordering for a workplace or classroom PD230X unit?\u003c\/strong\u003e\u003cbr\u003eThe same fit applies regardless of setting, so matching the model name to PD230X on the unit's badge or menu is what matters, whether it's used in an office, classroom or elsewhere.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182682190060,"sku":"LA-10531","price":322.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"}],"url":"https:\/\/www.lampsauthority.com\/collections\/video7-projector-lamps.oembed","provider":"Lamps Authority","version":"1.0","type":"link"}