{"title":"Synelec projector lamps","description":"\u003cp\u003eReplacement projector lamps for Synelec projectors — 5 lamps catalogued. Available as bare lamps (the bulb alone, fitted into the housing already in your projector) and as complete modules (bulb and housing together, ready to drop straight in).\u003c\/p\u003e\u003cp\u003eEvery lamp carries a genuine Philips, Osram or Ushio burner, ships free worldwide, and is covered by a 180-day guarantee. If you are not sure which your projector takes, check the code on the old lamp or send us a photo of the label.\u003c\/p\u003e","products":[{"product_id":"ti-4076768-0-projector-lamp","title":"TI 4076768\/0 Bare Projector Lamp","description":"\u003cp\u003eSynelec's LM-1000 takes a bare bulb coded TI 4076768\/0, supplied without a housing so it's built for fitting into the cage already inside your projector rather than being sold as a complete module with a new housing attached to it.\u003c\/p\u003e\u003cp\u003eTI 4076768\/0 is the only reference we hold for this lamp, so check it against the code printed on your old bulb before ordering. Fitting it means opening your existing housing, transferring the bulb across in the same orientation, and reconnecting it exactly as the original was wired.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10422\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs TI 4076768\/0 the only part number for the LM-1000's lamp?\u003c\/strong\u003e\u003cbr\u003eYes, it's the only code we list for this bulb, so compare it directly against the reference printed on your existing LM-1000 lamp before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the TI 4076768\/0 replace my LM-1000's whole assembly?\u003c\/strong\u003e\u003cbr\u003eNo, it's a bare bulb, intended for fitting into the housing already inside your LM-1000 rather than replacing the whole assembly with a new one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same lamp used in the Synelec LM-1200?\u003c\/strong\u003e\u003cbr\u003eNo, we list TI 4076768\/0 against the LM-1000 specifically; the LM-1200 uses a different lamp entirely, with its own separate listing and its own part reference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore buying this bare bulb, what condition should the LM-1000's cage be in?\u003c\/strong\u003e\u003cbr\u003eMake sure the cage, connector and any locking clips on your LM-1000 are undamaged, since a bare bulb assumes the housing itself doesn't need replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing use an actual photo of the TI 4076768\/0 lamp?\u003c\/strong\u003e\u003cbr\u003eNo, a generic image is shown instead of a photo of this specific bulb, so confirm fit using the part number and your projector's model rather than the picture.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182621274348,"sku":"LA-10422","price":201.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"151-1002-projector-lamp","title":"151-1002 bare projector lamp","description":"\u003cp\u003eThis bare lamp supplies the burner for Synelec's LM-1000, LM-800 and LMU 800 projectors, all fitted with the black oval plug connector. It is sold as the replacement element only, for fitting inside your existing housing and cage. We list it under part number 151-1002, with 771181 recorded as an alternative code for the same lamp.\u003c\/p\u003e\u003cp\u003eBecause this is a bare lamp, keep your original Synelec housing and swap only the burner and cage assembly; do not order a lamp module if your projector still has a working housing. If your unit's label shows 771181 rather than 151-1002, this is still the correct part, since both codes refer to the same lamp. Confirm the black oval plug before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10423\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit both the LM-1000 and the LM-800?\u003c\/strong\u003e\u003cbr\u003eYes. The 151-1002 lamp is shared across the Synelec LM-1000, LM-800 and LMU 800, all of which use the black oval plug connector, so one part covers all three models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between 151-1002 and 771181?\u003c\/strong\u003e\u003cbr\u003eNothing functionally. 771181 is an alternative code for the same lamp; whichever number appears on your projector's label or old lamp, ordering 151-1002 gets you the identical replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a bare lamp or does it include a housing?\u003c\/strong\u003e\u003cbr\u003eThis is a bare lamp only, the burner and cage without a housing. It is fitted into your existing Synelec housing, so keep that housing when the old lamp is removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my projector uses the black oval plug?\u003c\/strong\u003e\u003cbr\u003eCheck the connector on your current lamp before ordering. Synelec LM-1000, LM-800 and LMU 800 units built with the black oval plug take this lamp; a different connector shape means a different part is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOnce the 151-1002 is installed, does the projector's hour count need clearing?\u003c\/strong\u003e\u003cbr\u003eYes. Most Synelec projectors track lamp hours and prompt a reset from the menu once a new lamp is installed. Check your model's manual for the exact steps, since menus vary between units.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182622126316,"sku":"LA-10423","price":201.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27256-lg.png?v=1786958945"},{"product_id":"151-0002-projector-lamp","title":"151-0002 bare projector lamp","description":"\u003cp\u003eSynelec's C50XI and ID multi 50 projectors both take this bare replacement lamp, listed under part number 151-0002. As a bare lamp it consists of the burner and cage only, ready to fit inside your projector's existing housing. No alternative part codes are recorded for this lamp, so 151-0002 is the number to order.\u003c\/p\u003e\u003cp\u003eSince only two projector models use this lamp, fitting is straightforward: remove the old burner and cage from your C50XI or ID multi 50, then install this one in its place, keeping the original housing. There is a single part number for this lamp, so there is no risk of confusing it with a related code. Handle the bulb by its base rather than the glass.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10421\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes one lamp cover both the C50XI and the ID multi 50?\u003c\/strong\u003e\u003cbr\u003eYes, the 151-0002 lamp is common to both the Synelec C50XI and ID multi 50, so there is no need to check for model-specific variants before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 151-0002 a bare bulb or a complete module?\u003c\/strong\u003e\u003cbr\u003eIt is a bare lamp: the burner and cage without a housing shell. Fit it into your existing C50XI or ID multi 50 housing rather than replacing the whole assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 151-0002 the only reference I might find on a C50XI lamp?\u003c\/strong\u003e\u003cbr\u003eYes. No alternative codes are recorded for this lamp; 151-0002 is the only number associated with it, which makes ordering the right part straightforward even if your old lamp's label has become hard to read.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich parts of the 151-0002 are safe to touch when unpacking it?\u003c\/strong\u003e\u003cbr\u003eHold the lamp by its base or cage, not the glass envelope. Skin oils on the bulb can shorten its life once the projector is switched on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace the lamp in a C50XI or ID multi 50?\u003c\/strong\u003e\u003cbr\u003eReplace it once brightness drops noticeably, colours look washed out, or the projector reports a lamp warning. Waiting until the lamp fails completely can also affect the housing.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182622716140,"sku":"LA-10421","price":201.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27318-lg.png?v=1786958945"},{"product_id":"synelec-lm-1200-projector-lamp","title":"Synelec LM-1200 Bare Projector Lamp","description":"\u003cp\u003eSynelec does not appear to publish a distinct part number for the lamp used in the LM-1200, so this bulb is listed by the projector it fits. It's supplied bare, for fitting into the housing already inside your LM-1200 rather than as a complete module.\u003c\/p\u003e\u003cp\u003eBecause there's no manufacturer code attached to this lamp, ordering correctly means matching the model name, Synelec LM-1200, against this listing rather than a part number. Once fitted into your existing housing, seat the bulb in the same position and orientation as the one it replaces.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10424\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't a part number listed for this Synelec lamp?\u003c\/strong\u003e\u003cbr\u003eSynelec does not appear to publish a distinct code for the LM-1200's lamp, so we identify it by the projector it fits instead of a manufacturer reference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LM-1200 lamp come as a bare bulb or a full module?\u003c\/strong\u003e\u003cbr\u003eIt's supplied as a bare bulb here, designed for fitting into the housing already inside your LM-1200 rather than a complete module with a new cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this lamp also fit the Synelec LM-1000?\u003c\/strong\u003e\u003cbr\u003eWe list this bulb against the LM-1200 specifically; the LM-1000 has its own separate listing, since Synelec used a different lamp for that particular model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I check I'm ordering the right lamp for my Synelec projector?\u003c\/strong\u003e\u003cbr\u003eMatch the exact model printed on your projector, Synelec LM-1200, against this listing, since there is no separate part number to compare against your old bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat precautions should I take when fitting the replacement bulb?\u003c\/strong\u003e\u003cbr\u003eAllow the old lamp to cool fully before removing it, and handle the new bulb by its base rather than the glass to avoid marks that can shorten its working life.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182673113324,"sku":"LA-10424","price":201.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"synelec-lmu-800-projector-lamp","title":"Synelec LMU 800 Bare Projector Lamp","description":"\u003cp\u003eThis bare bulb is built for the Synelec LMU 800, listed by the projector it fits since Synelec does not appear to publish a separate part code for it. It's supplied without a housing, for fitting into the cage already inside your LMU 800.\u003c\/p\u003e\u003cp\u003eWith no manufacturer reference to check this lamp against, matching your projector's exact model name, Synelec LMU 800, against this listing is how to confirm you're ordering correctly. Fit the bulb into your existing housing, keeping the same orientation as the lamp it replaces.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10425\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy is there no part number for the LMU 800 lamp?\u003c\/strong\u003e\u003cbr\u003eSynelec does not appear to publish a distinct code for this lamp, so we list it against the projector it fits, the LMU 800, rather than a manufacturer reference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LMU 800 lamp related to the LM-1200 or LM-1000?\u003c\/strong\u003e\u003cbr\u003eNo, the LMU 800 is a separate Synelec model with its own listing; its lamp is not the same as the one used in the LM-1200 or LM-1000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAm I buying the LMU 800's bulb alone here, or a housed module?\u003c\/strong\u003e\u003cbr\u003eThe bulb alone. It's a bare lamp, meant for fitting into the housing already inside your LMU 800 rather than being supplied as a complete module with a new cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm I'm buying the right lamp for my projector?\u003c\/strong\u003e\u003cbr\u003eCheck the exact model printed on your projector, Synelec LMU 800, against this listing, since there's no separate part number to compare against your old bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the safest way to remove the old bulb before fitting this one?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully after use, then open the housing carefully and lift the old bulb free without touching the new glass with bare fingers when you fit the replacement.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182673375468,"sku":"LA-10425","price":201.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"}],"url":"https:\/\/www.lampsauthority.com\/collections\/synelec-projector-lamps.oembed","provider":"Lamps Authority","version":"1.0","type":"link"}