{"title":"Sony projector lamps","description":"\u003cp\u003eReplacement projector lamps for Sony projectors — 108 lamps catalogued. Available as bare lamps (the bulb alone, fitted into the housing already in your projector) and as complete modules (bulb and housing together, ready to drop straight in).\u003c\/p\u003e\u003cp\u003eEvery lamp carries a genuine Philips, Osram or Ushio burner, ships free worldwide, and is covered by a 180-day guarantee. If you are not sure which your projector takes, check the code on the old lamp or send us a photo of the label.\u003c\/p\u003e","products":[{"product_id":"lmp-c120-projector-lamp-module","title":"LMP-C120 projector lamp with module","description":"\u003cp\u003eThis module supplies the LMP-C120 lamp fully seated in a new housing, built for Sony's CS1, CS2 and CX1 compact projectors. Choosing the module rather than the bare bulb makes sense if your existing lamp cage is cracked, discoloured or the pins no longer make a clean connection.\u003c\/p\u003e\u003cp\u003eNo alternative codes exist for this lamp in our records, so LMP-C120 alone is what to match against your old unit's label. Fitting is straightforward: the depleted module lifts out as a single piece, and this new one, bulb and housing together, drops into the same bay without further assembly.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10328\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 6 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the advantage of the module if I only need a new bulb?\u003c\/strong\u003e\u003cbr\u003eIf your existing housing is undamaged, a bare-bulb listing for the same LMP-C120 would usually be the lighter option. The module is worth the extra housing if your current cage shows any cracking, warping or pin damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the CS1, CS2 and CX1 really all take the same lamp?\u003c\/strong\u003e\u003cbr\u003eYes, these three Sony projectors share a common lamp compartment, so a single LMP-C120 module fits all three despite their different model names. There is no need to order separately depending on which of the three you own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the LMP-C120 module listing skip the power figure?\u003c\/strong\u003e\u003cbr\u003eA verified wattage figure for the LMP-C120 is not currently in our records, so we have left it out rather than publish a number we cannot confirm. Every other detail shown, part number, type and compatible projectors, is accurate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the safest way to remove the old housing before fitting this one?\u003c\/strong\u003e\u003cbr\u003ePower down and unplug the projector, then let it cool fully, since the housing can remain hot for some time. Release the retaining screw on the lamp door, slide the old module out by its handle, and avoid touching the new bulb's glass as you fit the replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other part numbers I should look for on my old lamp?\u003c\/strong\u003e\u003cbr\u003eNo, LMP-C120 is the only code we hold for this lamp, so that marking alone confirms the match without needing to check for alternatives on the housing or in the manual.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182565306604,"sku":"LA-10328","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/35152-xl.png?v=1786965270"},{"product_id":"lmp-e191-projector-lamp-module","title":"LMP-E191 projector lamp with module","description":"\u003cp\u003eThis LMP-E191 module, a 190-watt bulb rated for 3000 hours, is built for one of Sony's most widely shared lamp fittings, spanning the BW7, ES7, ES7X, EW7, EX7, EX7+, EX70, TX7 and TX70. The module includes a new housing, so it suits projectors whose current cage is worn or damaged.\u003c\/p\u003e\u003cp\u003eWe list no alternative part numbers for the LMP-E191, so this code alone identifies the correct lamp regardless of which of the fourteen listed projector names applies to your unit. Because the bulb ships pre-fitted in its housing, installation involves swapping the whole assembly rather than handling loose glass.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 190 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10326\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 14 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the module fit the ES7X as well as the standard ES7?\u003c\/strong\u003e\u003cbr\u003eYes, the ES7X is included in this module's compatibility list alongside the standard ES7, both sharing the same LMP-E191 lamp bay and fitting, so ordering does not depend on which variant your projector's plate shows.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I fit just the bulb from this module into my existing housing instead?\u003c\/strong\u003e\u003cbr\u003eThis particular listing is supplied as a complete module, with the bulb already seated in its housing, so it is not meant to be split apart for use in a different cage. If you only need a bulb and your current housing is fine, look for a bare-lamp listing under the same LMP-E191 code instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many Sony projector names actually use this one lamp?\u003c\/strong\u003e\u003cbr\u003eFourteen model names in our records take the LMP-E191, spanning the BW7, ES7, ES7X, EW7, EX7, EX7+, EX70, TX7 and TX70 lines, in both their plain and VPL-prefixed forms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wattage and expected life of this bulb?\u003c\/strong\u003e\u003cbr\u003eIt runs at 190 watts with a 3000-hour rating. That figure describes expected output under normal use, and the hours you get in practice depend on brightness settings and how often the projector runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to reset a usage counter after fitting this module?\u003c\/strong\u003e\u003cbr\u003eMany projectors in this Sony range track lamp hours and prompt for confirmation once a new module is detected. After fitting, check your specific model's on-screen menu and follow whatever reset step it shows.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182566355180,"sku":"LA-10326","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27521-xl.png?v=1786959008"},{"product_id":"lmp-c162-projector-lamp-module","title":"LMP-C162 projector lamp with module","description":"\u003cp\u003eThe LMP-C162 module, a 165-watt bulb rated for 3000 hours, is shared across eight Sony projector names: the CS20, CS20A, CX20, CX20A, ES3, ES4, EX3 and EX4, each also listed under its VPL prefix. The module supplies a new housing along with the bulb, ready to fit as one piece.\u003c\/p\u003e\u003cp\u003eThis lamp carries no alternative codes in our records, so LMP-C162 on the old unit's label confirms the match across any of the sixteen listed model variants. Take out the old module by its handle, avoid touching the new bulb's glass while fitting, and seat the replacement fully before closing the lamp door.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 165 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10330\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 16 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does the CS20A appear as a separate entry from the CS20?\u003c\/strong\u003e\u003cbr\u003eThe 'A' suffix usually marks a minor regional or production revision of the same model, and Sony kept the lamp requirement identical between the CS20 and CS20A, so both take this same LMP-C162 module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many projector models actually share this lamp?\u003c\/strong\u003e\u003cbr\u003eEight distinct Sony model names, the CS20, CS20A, CX20, CX20A, ES3, ES4, EX3 and EX4, each counted again under their VPL-prefixed naming, bringing the total compatible listings to sixteen.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated output of this bulb?\u003c\/strong\u003e\u003cbr\u003eThis module runs at 165 watts and is rated for 3000 hours of service. As with any lamp, real-world life depends on your projector's brightness mode and how many hours it runs each day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other part numbers I should check my old lamp against?\u003c\/strong\u003e\u003cbr\u003eNo, we hold no alternative codes for the LMP-C162, so this number alone is what to look for on your existing lamp or its packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the safest way to handle the new module during fitting?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool before opening the lamp door, then lift the old module out by its designated handle rather than the bulb itself. Handle the new module the same way, and avoid touching the glass envelope with bare fingers.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182567174380,"sku":"LA-10330","price":120.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28858-xl.png?v=1786959195"},{"product_id":"lmp-c133-projector-lamp","title":"LMP-C133 bare projector lamp","description":"\u003cp\u003eThe Sony CS10, also known as the VPL-CS10, takes the LMP-C133 as its bare replacement bulb, rated at 132 watts for 2000 hours. Supplied without a housing, it is meant for fitting inside the cage already present in your projector, provided that housing is still in sound condition.\u003c\/p\u003e\u003cp\u003eThere are no alternative part numbers for the LMP-C133 in our records, so a bulb marked with this code is a direct match for the CS10. Because this is the bare version, inspect your current housing for cracks or bent contacts before ordering, since those issues call for a full module rather than a bulb alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 132 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10329\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the CS10 the only projector this lamp fits?\u003c\/strong\u003e\u003cbr\u003eYes, in our records the LMP-C133 is listed solely for the Sony CS10 and its VPL-CS10 naming, with no other compatible models appearing on file for this particular lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the wattage and rated hours for this bulb?\u003c\/strong\u003e\u003cbr\u003eThis lamp is rated at 132 watts with a 2000-hour service life. That figure reflects expected output under normal use, and actual runtime will vary with your projector's brightness setting and how often it is used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSince the image shown is generic, how can I be sure of what I'm ordering?\u003c\/strong\u003e\u003cbr\u003eThe photo is a placeholder rather than an image of this specific part, but the listing's part number, wattage, rated life and projector compatibility are all specific to the LMP-C133, which is what determines whether it fits your CS10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this bare bulb be fitted without any special tools?\u003c\/strong\u003e\u003cbr\u003eMost CS10 units use a simple latch or small screw to release the housing, after which the bulb itself lifts out by its base. A small screwdriver is usually all that is needed alongside careful handling of the glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I safely dispose of the old bulb?\u003c\/strong\u003e\u003cbr\u003eProjector lamps hold a small amount of pressurised gas and should not go in general household waste. Take the old bulb to a local electrical or lamp recycling point rather than disposing of it in a bin.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182568026348,"sku":"LA-10329","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-e180-projector-lamp-module","title":"LMP-E180 projector lamp with module","description":"\u003cp\u003eRated at 185 watts for 2000 hours, the LMP-E180 module fits four Sony projectors: the CS7, DS100, DS1000 and ES1, along with their VPL-prefixed equivalents. The module includes a fresh housing as well as the bulb, so it replaces the entire lamp assembly in one step.\u003c\/p\u003e\u003cp\u003eWe hold no alternative codes for the LMP-E180, so this number on your old lamp's label is enough to confirm the fit. Because this is the module version, it comes with a new housing as well as the bulb, which is the right choice if your existing cage is cracked, discoloured or no longer holds a clean connection.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 185 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10335\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo the CS7, DS100, DS1000 and ES1 really take an identical lamp?\u003c\/strong\u003e\u003cbr\u003eYes, these four Sony projectors were built around the same lamp bay, so the LMP-E180 module fits all four regardless of the different model naming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included when I buy the module rather than a bulb-only listing?\u003c\/strong\u003e\u003cbr\u003eThe module supplies the 185-watt bulb already fitted inside a new housing, so you are replacing the entire lamp assembly as a single unit rather than handling loose glass or reusing your existing cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the LMP-E180 rated to last?\u003c\/strong\u003e\u003cbr\u003eIt carries a 2000-hour rating at 185 watts. This is the expected output life under typical conditions, and actual hours will vary depending on brightness settings and how much the projector is used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other codes I should check my old lamp against?\u003c\/strong\u003e\u003cbr\u003eNo, LMP-E180 is the only code we hold for this lamp, so that marking on your existing unit is sufficient confirmation without checking further numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check on the projector before fitting the new module?\u003c\/strong\u003e\u003cbr\u003ePower down and unplug the unit, then give it time to cool fully, since the lamp compartment can stay warm well after use. Once cool, release the lamp door, remove the old module by its handle, and fit the replacement before securing the door again.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182568976620,"sku":"LA-10335","price":139.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/35661-xl.png?v=1786965465"},{"product_id":"lmp-e180-projector-lamp","title":"LMP-E180 bare projector lamp","description":"\u003cp\u003eThis bare version of the LMP-E180 covers the same four Sony projectors as the module listing, the CS7, DS100, DS1000 and ES1, at the same 185-watt, 2000-hour rating. It supplies the bulb only, without a housing, for fitting inside a cage that is already in working order.\u003c\/p\u003e\u003cp\u003eNo alternative part numbers exist for this lamp beyond LMP-E180, so that code confirms the fit across any of the eight listed model variants. Check your existing housing carefully before choosing this bare option, since cracked plastic or bent pins would call for the module version, which replaces the housing as well as the bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 185 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10334\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat should I inspect on my housing before choosing the bare bulb option?\u003c\/strong\u003e\u003cbr\u003eLook closely for cracks in the housing plastic, scorch marks near the socket, or bent and corroded pins on the connector. Any of these point toward needing a full module instead, since a bare bulb depends on a sound housing to seat and connect properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo all eight listed projector names genuinely share this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, the CS7, DS100, DS1000 and ES1, in both their plain and VPL-prefixed forms, all use the identical LMP-E180 lamp bay, so this single bare bulb fits any of them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage and lamp life does this bulb carry?\u003c\/strong\u003e\u003cbr\u003eIt is rated at 185 watts with a 2000-hour expected service life. That figure describes typical output under normal use, with actual hours depending on your projector's brightness setting and daily runtime.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I avoid damaging the bulb while fitting it?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully first, then handle the bulb by its base rather than the glass envelope, since skin oils on the glass can cause uneven heating once the lamp is powered on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other part numbers for the LMP-E180 I should watch for?\u003c\/strong\u003e\u003cbr\u003eNo, we list no alternative codes for this lamp, so LMP-E180 by itself is what to check for on your existing bulb or its original packaging.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182569664748,"sku":"LA-10334","price":144.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-c200-projector-lamp-module","title":"LMP-C200 projector lamp with module","description":"\u003cp\u003eThe LMP-C200 module covers an unusually broad span of Sony projectors, from the CW125 through the CX100, CX120, CX125, CX130, CX131, CX135, CX150, CX155, CX160, CX161 and CX165, in both plain and VPL-prefixed naming. Despite the many model numbers, all of them share this one lamp and housing fitting.\u003c\/p\u003e\u003cp\u003eNo alternative part codes exist for the LMP-C200 in our records, so this number is the only one to check on your existing lamp's label. As a module, the bulb arrives already mounted in its housing, so fitting is a matter of swapping the whole assembly rather than handling any loose glass.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10336\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 23 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp code cover so many CX model numbers?\u003c\/strong\u003e\u003cbr\u003eSony's CX range grew across many incremental model updates, from the CX100 up to the CX165, but kept the same lamp bay and electrical fitting throughout that run, along with the closely related CW125. That is why the LMP-C200 spans the whole family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I check my exact projector against this long list?\u003c\/strong\u003e\u003cbr\u003eLook at the model plate on the underside or rear of your projector for the precise number, such as CX131 rather than a rounded-off CX130. Match that exact figure against the compatibility list above before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't a wattage shown for this module?\u003c\/strong\u003e\u003cbr\u003eA confirmed wattage for the LMP-C200 is not currently in our records, so we have left the field blank rather than publish a figure we cannot verify.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the bulb alone or does it include the housing?\u003c\/strong\u003e\u003cbr\u003eThis is the full module, so the bulb comes already seated in a new housing. You replace the entire lamp assembly as one unit rather than opening up the old cage to swap the bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMight my old CX-series lamp be marked with something other than LMP-C200?\u003c\/strong\u003e\u003cbr\u003eNo, LMP-C200 is the only part number we hold for this lamp, so it is the sole code to match against your existing unit or its packaging.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182570615020,"sku":"LA-10336","price":144.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28863-xl.png?v=1786959194"},{"product_id":"lmp-c121-projector-lamp-module","title":"LMP-C121 projector lamp with module","description":"\u003cp\u003eThis LMP-C121 module carries a 120-watt bulb rated for 2000 hours, and it fits five Sony projectors: the CS3, CS4, CX2, CX3 and CX4, together with their VPL-prefixed names. The bulb ships pre-fitted inside a new housing, ready to be dropped straight into the lamp bay.\u003c\/p\u003e\u003cp\u003eWe hold no alternative codes for the LMP-C121, so this number on your old lamp is the only thing you need to check. Removing the depleted module and fitting this one is a single step, since the new bulb arrives already seated in its housing rather than needing separate assembly.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10332\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich five Sony projectors take this lamp?\u003c\/strong\u003e\u003cbr\u003eThe LMP-C121 fits the CS3, CS4, CX2, CX3 and CX4, each also listed under its VPL prefix. Check your model plate to see which of these applies to your projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power draw and running hours does the LMP-C121 offer?\u003c\/strong\u003e\u003cbr\u003eIt runs at 120 watts with a 2000-hour rating, figures that describe expected output under normal use. Actual lamp life in your own projector will depend on brightness settings and how often it runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the housing new, or do I need to keep my old one?\u003c\/strong\u003e\u003cbr\u003eThe housing is new. This module replaces the entire lamp assembly, so your old cage is not reused, and you are not required to transfer any parts between housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I make sure this fits my exact CX model?\u003c\/strong\u003e\u003cbr\u003eCompare the model number on your projector's rating plate against the five listed above; note that the CX2, CX3 and CX4 look similar at a glance, so check the final digit carefully before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I do with the old module once it's removed?\u003c\/strong\u003e\u003cbr\u003eLet it cool fully before handling, then take it to a local electrical or lamp recycling point rather than general waste, since projector lamps contain a small amount of pressurised gas.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182571368684,"sku":"LA-10332","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26213-xl.png?v=1786958711"},{"product_id":"lmp-c163-projector-lamp-module","title":"LMP-C163 projector lamp with module","description":"\u003cp\u003eThe LMP-C163 module fits the Sony CS21 and CX21, listed also as the VPL-CS21 and VPL-CX21. It supplies the bulb already mounted inside a new housing, so the entire lamp assembly is replaced as a single unit rather than the bulb alone.\u003c\/p\u003e\u003cp\u003eThis lamp has no alternative part numbers in our records, so LMP-C163 is the code to check for on your existing unit's label. Fitting the module means lifting out the old assembly by its handle and sliding this replacement into the same bay, with no separate step for the bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10331\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp shared with any other Sony projector besides the CS21 and CX21?\u003c\/strong\u003e\u003cbr\u003eNo, in our records the LMP-C163 is listed only for the CS21 and CX21, under both their plain and VPL-prefixed model names, with no wider compatibility beyond these two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is there no wattage listed for this module?\u003c\/strong\u003e\u003cbr\u003eA verified wattage figure for the LMP-C163 is not currently in our records, so we leave that field blank rather than state a number we cannot confirm. The part number and compatibility details shown are accurate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LMP-C163 delivered inside a brand-new housing?\u003c\/strong\u003e\u003cbr\u003eYes, this is the module version, so the bulb arrives already fitted inside a new housing rather than as a bare replacement bulb, meaning no parts are reused from your old assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the safest way to fit this module?\u003c\/strong\u003e\u003cbr\u003eUnplug the projector and let it cool fully, then release the lamp door and remove the old module by its designated handle. Fit the new module the same way, avoid touching the glass, and secure the door before switching the projector back on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I tell whether I have the CS21 or CX21 version?\u003c\/strong\u003e\u003cbr\u003eCheck the model plate on the base or rear panel of your projector; it will state CS21 or CX21 directly, and both take this same LMP-C163 module, so the distinction does not affect which lamp to order.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182572122348,"sku":"LA-10331","price":123.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26129-xl.png?v=1786958708"},{"product_id":"lmp-c190-projector-lamp-module","title":"LMP-C190 projector lamp with module","description":"\u003cp\u003eFive Sony CX-series projectors, the CX61, CX63, CX80, CX85 and CX86, along with their VPL-prefixed equivalents, all share the LMP-C190 module, a 190-watt bulb rated for 2000 hours. The bulb is supplied already fitted into a new housing, ready to fit as one complete assembly.\u003c\/p\u003e\u003cp\u003eWe hold no alternative codes for the LMP-C190, so that number alone confirms the match against your old lamp's label. Because this is the module version, there is no separate bulb-to-housing step; simply remove the old assembly and fit this one into the same lamp bay before closing the door.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 190 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10339\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat connects the CX61 through CX86 to a single lamp code?\u003c\/strong\u003e\u003cbr\u003eThese five Sony projectors, despite spanning a range of model numbers, were built around the same lamp compartment and optical engine, so Sony's LMP-C190 covers all of them under one part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat life expectancy does the LMP-C190 carry in the CX61 family?\u003c\/strong\u003e\u003cbr\u003eIt carries a 2000-hour rating at 190 watts, describing the expected output life under normal use. Watch for dimming or a colour shift as you approach that figure, since actual hours vary with brightness settings and daily use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LMP-C190 arrive already mounted in a fresh cage?\u003c\/strong\u003e\u003cbr\u003eYes, this is the full module, so the bulb comes already mounted in a new housing rather than being supplied as a bare replacement bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to match the exact CX model number, or will any of the five work?\u003c\/strong\u003e\u003cbr\u003eAny of the five listed models, CX61, CX63, CX80, CX85 or CX86, take this identical lamp, so you do not need to worry about small differences between them for the purposes of fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's involved in fitting this module safely?\u003c\/strong\u003e\u003cbr\u003ePower down and unplug the projector, then wait for it to cool before opening the lamp door. Remove the old module by its handle, fit the new one without touching the bulb's glass, and secure the door fully before restoring power.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182572974316,"sku":"LA-10339","price":130.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26966-xl.png?v=1786958884"},{"product_id":"lmp-q120-projector-lamp","title":"LMP-Q120 bare projector lamp","description":"\u003cp\u003eLMP-Q120 is the part number we use for the bulb only, sold without a housing, for the Sony EF100E and FX200E. The same lamp also covers the VPL-EF100E and VPL-FX200E, where model plates sometimes carry the shorter name instead of the full VPL prefix. Fit it into your existing housing rather than replacing the whole assembly.\u003c\/p\u003e\u003cp\u003eBecause this is a bare bulb, keep your current lamp housing and cage instead of ordering a full module. Check the code printed on the old lamp or the sticker inside your projector against LMP-Q120 before you buy, since Sony reused several housing designs across this range. If your projector takes a full replacement module instead, choose that version rather than this one.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10341\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich Sony projectors take the LMP-Q120?\u003c\/strong\u003e\u003cbr\u003eLMP-Q120 fits the Sony EF100E and FX200E, along with the VPL-EF100E and VPL-FX200E. These are the same models under Sony's full and shortened naming, so check your projector's rating label if you are unsure which one you own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'bare' mean for this listing?\u003c\/strong\u003e\u003cbr\u003eA bare lamp is the bulb on its own, without the plastic housing or cage that holds it in the projector. You reuse your existing housing and simply swap the bulb inside it, which keeps the cost lower than a full module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs LMP-Q120 the code Sony assigns to this lamp?\u003c\/strong\u003e\u003cbr\u003eLMP-Q120 is the code Sony assigns to this lamp, and it is what we list the product under. Checking this code against the one printed on your old bulb or inside your projector is the surest way to confirm a match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before fitting a new bulb?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully and switch it off at the wall before opening the lamp compartment. Handle the new bulb by its base rather than the glass, and seat it fully in the housing before closing the door, since a loose fit can trigger a warning light.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen does a projector lamp need replacing?\u003c\/strong\u003e\u003cbr\u003eMost lamps are swapped once the picture dims noticeably, colours shift, or the projector reports the lamp is due for attention. Because watts and hours are not published for this particular code, go by the picture quality and any on-screen warning rather than a fixed hour count.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182573629676,"sku":"LA-10341","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32373-lg.png?v=1786960463"},{"product_id":"lmp-c161-projector-lamp-module","title":"LMP-C161 projector lamp with module","description":"\u003cp\u003eThis is the complete LMP-C161 assembly, bulb and housing together, rated at 165 watts with a 3000-hour lamp life. It replaces the projector lamp in the Sony CX70, CX71, CX75 and CX76, listed by Sony as the VPL-CX70, VPL-CX71, VPL-CX75 and VPL-CX76. Fit the whole unit as one piece rather than opening the housing.\u003c\/p\u003e\u003cp\u003eBecause this listing includes the housing, there is nothing to transfer from your old lamp beyond removing it and slotting this one into place. If you already have a working cage and only need the bulb, look for the bare version of LMP-C161 instead, which costs less. Match the code on your old lamp before ordering to avoid a mismatch.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 165 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10340\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the LMP-C161 a slot-in unit with its own housing?\u003c\/strong\u003e\u003cbr\u003eYes. LMP-C161 is sold as a complete module, meaning the bulb and its housing arrive as one assembly ready to slot into the CX70, CX71, CX75 or CX76. You are not required to transfer the bulb into an old cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should the LMP-C161 last?\u003c\/strong\u003e\u003cbr\u003eSony rates this lamp at 165 watts with roughly 3000 hours of use. Actual life depends on how the projector is run, including heat, ventilation and how often it is switched on and off, so treat the figure as a guide rather than a guarantee.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector is badged VPL-CX75, not CX75 - is this the right lamp?\u003c\/strong\u003e\u003cbr\u003eYes. Sony markets the same projector under both the short CX75 name and the fuller VPL-CX75 designation, and LMP-C161 fits either one. Check the model number on the rating label if you want to confirm before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I fit the module myself, or does it need a technician?\u003c\/strong\u003e\u003cbr\u003eMost owners fit LMP-C161 without help, since it is designed to slide into the lamp bay and lock with the same catches as the original. Always unplug the projector and let it cool first, and avoid touching the glass with bare fingers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the lamp timer warning mean?\u003c\/strong\u003e\u003cbr\u003eSony projectors track running hours and show a warning once the lamp approaches the end of its rated life. Fitting LMP-C161 replaces the bulb itself; resetting the counter afterwards is a separate step handled through the projector's own menu.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182574743788,"sku":"LA-10340","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34634-xl.png?v=1786964306"},{"product_id":"lmp-h201-projector-lamp-module","title":"LMP-H201 projector lamp with module","description":"\u003cp\u003eSony's LMP-H201 module covers a wide span of the BRAVIA projector line, including the VPL-HW10, HW15, HW20A and the VPL-VW70 through VW90ES models. It arrives as a full bulb-and-housing assembly, so there is no need to open the old cage or transfer parts between units. Watts and hours are not published for this code.\u003c\/p\u003e\u003cp\u003eWith 27 compatible models sharing this single lamp code, it is worth checking the exact model printed on your projector's rear panel or menu screen, since Sony sold overlapping names such as HW20 and HW20A side by side. If your unit already has a sound housing and only the bulb has failed, the bare version of LMP-H201 is also listed separately.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10321\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 27 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich BRAVIA models use the LMP-H201?\u003c\/strong\u003e\u003cbr\u003eLMP-H201 covers a long run of Sony's home cinema projectors, from the VPL-HW10 up to the VPL-VW90ES and VPL-VWPRO1, including models badged simply HW10, HW15 or VW80. Check the exact designation on your unit's rear panel, since several similar names exist across the range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are there so many compatible projector names listed?\u003c\/strong\u003e\u003cbr\u003eSony reused and renamed several BRAVIA models over the years, so the same physical lamp can appear under a BRAVIA-prefixed name, a plain HW or VW code, and a full VPL designation. All of them take the identical LMP-H201 lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the housed version or the bulb only?\u003c\/strong\u003e\u003cbr\u003eThis listing is the full module, meaning the bulb is already fitted into its housing and ready to install as a single unit. A separate bare-bulb listing exists under the same LMP-H201 code for anyone who wants to reuse their current housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAny handling advice for the LMP-H201 module before it goes into a BRAVIA projector?\u003c\/strong\u003e\u003cbr\u003eAllow the projector to cool with the power disconnected before opening the lamp bay, and lift the module by its frame rather than the glass. Fingerprints and oils on the bulb surface can shorten its working life once the projector is switched back on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know when the lamp needs changing?\u003c\/strong\u003e\u003cbr\u003eLook out for a dimmer or discoloured picture, or a service message from the projector itself. Because Sony has not published watts or hours for this code, the picture on screen is a more reliable signal than a fixed running-hour count.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182575694060,"sku":"LA-10321","price":135.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/21432-xl.png?v=1786956913"},{"product_id":"lmp-h201-projector-lamp","title":"LMP-H201 bare projector lamp","description":"\u003cp\u003eFor owners who already have a working lamp housing, LMP-H201 is also available as the bulb alone, fitting the same broad range of BRAVIA projectors: the VPL-HW10 through HW20A and the VPL-VW70 through VW90ES, plus the VPL-VWPRO1 and VPL-GH10. No wattage or lamp-life figures are published for this code.\u003c\/p\u003e\u003cp\u003eBuying the bare bulb only makes sense if your existing cage is undamaged, since you will need to move the new bulb into it yourself. If the housing has cracked, discoloured or the retaining clips have broken, the full module version of LMP-H201 avoids that step entirely. Confirm the code on your old bulb matches before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10320\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 27 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this and the LMP-H201 module listing?\u003c\/strong\u003e\u003cbr\u003eThis listing is the bulb on its own, without the plastic housing or cage. You transfer it into your existing housing, whereas the module listing includes both parts ready assembled. Choose whichever matches the condition of the housing you already have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich projectors does the bare LMP-H201 fit?\u003c\/strong\u003e\u003cbr\u003eThe same wide BRAVIA range as the housed version, spanning the VPL-HW10 to VPL-HW20A and the VPL-VW70 to VPL-VW90ES, along with the VPL-VWPRO1 and VPL-GH10. Check your rear-panel model number if several names look similar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I move the old bulb's housing onto this one?\u003c\/strong\u003e\u003cbr\u003eYes, provided the housing itself is intact. Remove the old bulb, fit LMP-H201 into the same cage using the original clips or screws, and reinstall the assembly exactly as the old one came out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should my hands go when fitting the bare LMP-H201?\u003c\/strong\u003e\u003cbr\u003eHold it by its base or frame rather than the glass envelope, and keep the projector unplugged and cool throughout. Oils from bare skin left on the glass can cause uneven heating once the lamp is powered on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp appear under any other reference?\u003c\/strong\u003e\u003cbr\u003eWe list this lamp under the single code LMP-H201. If your old bulb or projector manual shows a different reference, check it against LMP-H201 directly, or get in touch if you are unsure it is the same part.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182576578796,"sku":"LA-10320","price":128.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-c132-projector-lamp","title":"LMP-C132 bare projector lamp","description":"\u003cp\u003eLMP-C132 is a 132-watt bulb rated for around 2000 hours, sold without a housing for owners who already have a working cage. It is the correct lamp for the Sony CX10, also sold as the VPL-CX10, and covers both naming conventions used for the same projector.\u003c\/p\u003e\u003cp\u003eSince this is the bare bulb, you will fit it inside your current housing rather than replacing the whole unit, which keeps the price down against the full module. Check the printed code on your existing lamp against LMP-C132 first, and inspect the housing for cracks or broken clips before deciding this is the right option.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 132 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10337\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage and lamp life does LMP-C132 carry?\u003c\/strong\u003e\u003cbr\u003eThis lamp is rated at 132 watts with an expected life of around 2000 hours under normal projector use. Heat, ventilation and how often the projector is switched on and off will all affect how close you get to that figure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CX10 the same projector as the VPL-CX10?\u003c\/strong\u003e\u003cbr\u003eYes, Sony sold this model under both the plain CX10 name and the fuller VPL-CX10 designation. LMP-C132 fits either one, so check your projector's rear label only if you want to confirm which name applies to your unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need the housing as well as the bulb?\u003c\/strong\u003e\u003cbr\u003eOnly if your existing housing is damaged. This listing is the bulb alone, meant to be fitted into a cage you already own. A separate module listing with the housing included is available if yours needs replacing too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat counts as safe handling for a new bulb?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool with the power lead removed before opening the lamp compartment, and avoid touching the glass envelope directly. Fit the bulb fully home in its housing so it seats correctly against the contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow will I know the lamp is nearing the end of its life?\u003c\/strong\u003e\u003cbr\u003eWatch for a dimmer picture, a change in colour balance, or flickering as the lamp warms up. With a 2000-hour rating, heavy daily use will reach that point sooner than occasional evening viewing.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182577430764,"sku":"LA-10337","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-e211-projector-lamp","title":"LMP-E211 bare projector lamp","description":"\u003cp\u003eRated at 210 watts with a 3000-hour life, LMP-E211 is the bulb-only version for a broad set of Sony projectors, including the EW130, EX100, EX120, EX145, EX175 and EX345. The same code also covers the VPL-SW125 and VPL-SX125, so check your model name carefully if it does not start with EX or EW.\u003c\/p\u003e\u003cp\u003eWith this many compatible models sharing one lamp code, confirming the number printed inside your projector or on the old bulb is worth doing before you order. Since it is a bare bulb, your current housing needs to be in good condition, as you will be transferring this lamp into it rather than fitting a new cage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 210 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10346\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 22 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich Sony models take the LMP-E211?\u003c\/strong\u003e\u003cbr\u003eThis code covers the EW130, EX100, EX120, EX145, EX175 and EX345, plus their VPL-prefixed equivalents and the VPL-SW125 and VPL-SX125. Check the model number on your projector's underside if you are working from an old, worn label.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the watt and hour ratings for this lamp?\u003c\/strong\u003e\u003cbr\u003eLMP-E211 is rated at 210 watts with roughly 3000 hours of expected life. As with any projector lamp, this figure assumes typical use and can vary with ventilation and how often the unit is powered on and off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I buy the bare bulb or the full module?\u003c\/strong\u003e\u003cbr\u003eChoose the bare bulb if your existing housing is undamaged and you only need to replace the lamp itself. If the housing or cage has cracked or the clips no longer hold securely, the module version with housing included is the safer choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'original' mean on a listing like this?\u003c\/strong\u003e\u003cbr\u003eIt means the lamp carries the same code and specification as the part originally fitted by Sony, rather than a rebuilt or third-party equivalent. LMP-E211 printed on the bulb is what to check against your old one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a risk in handling the bulb before fitting?\u003c\/strong\u003e\u003cbr\u003eThe glass can be sensitive to oils from skin, so hold the lamp by its base during fitting and avoid pressing on the envelope. Keep the projector unplugged and allow it to cool fully beforehand.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182578381036,"sku":"LA-10346","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-f270-projector-lamp","title":"LMP-F270 bare projector lamp","description":"\u003cp\u003eLMP-F270 carries a 275-watt rating and roughly 2000 hours of expected life, supplied as the bulb only for Sony's FE40, FE40L, FW41L, FX40 and FX40L projectors. It also fits the VPL-prefixed versions of each, such as the VPL-FX41 and VPL-FX41L, which share the identical lamp underneath.\u003c\/p\u003e\u003cp\u003eGiven the range of near-identical model codes here, from FX40 to FX41L, matching the number on your old lamp to LMP-F270 is the most reliable way to order correctly. As a bare bulb it needs an intact housing to sit in, so a full module is the better route if your current cage is damaged.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10351\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 13 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich projectors is LMP-F270 built for?\u003c\/strong\u003e\u003cbr\u003eIt covers the Sony FE40, FE40L, FW41, FW41L, FX40 and FX41 families, along with their VPL-prefixed names such as VPL-FE40L and VPL-FX41L. These model codes are easy to confuse, so check yours against the full list before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power and lifespan figures does the LMP-F270 carry?\u003c\/strong\u003e\u003cbr\u003eLMP-F270 is rated at 275 watts with an expected life of around 2000 hours. This is a guide figure based on typical use rather than a fixed cut-off point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bulb fit into my current housing?\u003c\/strong\u003e\u003cbr\u003eYes, provided your existing cage is the correct type for these FE and FX models and is not cracked or worn. Fit the new bulb using the same clips or screws that held the old one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I avoid ordering the wrong lamp code?\u003c\/strong\u003e\u003cbr\u003eCompare the code printed on your failing lamp, or found inside the projector's lamp bay, against LMP-F270. With several closely named FE and FX models sharing this range, the printed code is more reliable than the projector's model badge alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the correct way to fit a bare bulb safely?\u003c\/strong\u003e\u003cbr\u003eDisconnect the projector and let it cool before opening the lamp door. Avoid touching the glass with bare fingers, and press the bulb fully into its housing so the electrical contacts make a proper connection.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182579069164,"sku":"LA-10351","price":178.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-e211-projector-lamp-module","title":"LMP-E211 projector lamp with module","description":"\u003cp\u003eThis complete LMP-E211 assembly pairs the 210-watt, 3000-hour bulb with its housing, ready to fit directly into the Sony EW130, EX100, EX120, EX145 or EX175, or their VPL-SW125 and VPL-SX125 equivalents. No disassembly of an old housing is needed, since the whole unit installs as one piece.\u003c\/p\u003e\u003cp\u003eIf your existing housing is still sound and only the bulb needs changing, the bare version of LMP-E211 is listed separately and costs less. This module makes more sense once the housing itself is cracked, discoloured or no longer clips in securely, since both parts arrive matched and ready to install together.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 210 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10347\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 21 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with this listing?\u003c\/strong\u003e\u003cbr\u003eThe complete LMP-E211 module, meaning the bulb is already seated inside its housing. You remove the old assembly from the projector and fit this one in its place, without needing to separate bulb from housing at any point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the EX345 also take this lamp?\u003c\/strong\u003e\u003cbr\u003eThis particular listing covers the EW130, EX100, EX120, EX145 and EX175, along with the VPL-SW125 and VPL-SX125. If your model is not listed here, check our other LMP-E211 listings, as coverage can differ slightly between bare and module versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reset the lamp counter after fitting a new module?\u003c\/strong\u003e\u003cbr\u003eOnce the new LMP-E211 is installed and the projector powers on normally, the timer reset is done through the projector's own on-screen menu, usually under a lamp or maintenance setting rather than anything on the lamp itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a full module more reliable than a bare bulb?\u003c\/strong\u003e\u003cbr\u003eNot inherently, but fitting matched, factory-paired parts removes any risk of a mismatch between an old housing and a new bulb. It is mainly a question of whether your current housing still works properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before I order?\u003c\/strong\u003e\u003cbr\u003eConfirm your projector is one of the EW130, EX100, EX120, EX145 or EX175 models, or the equivalent VPL-SW125 or VPL-SX125, and that you want the housing included rather than the bulb alone.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182580019436,"sku":"LA-10347","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23777-xl.png?v=1786957091"},{"product_id":"lmp-e210-projector-lamp","title":"LMP-E210 bare projector lamp","description":"\u003cp\u003eLMP-E210 is the bare bulb for the Sony EX130, also badged as the VPL-EX130 depending on where the unit was sold. It fits inside your existing housing rather than arriving as a full assembly, and no wattage or hour rating is published for this particular code.\u003c\/p\u003e\u003cp\u003eSince only the bulb is included, check that your current housing and cage are free of cracks before ordering, as this lamp is designed to sit in the one you already have. If the housing needs replacing too, look for the module version of LMP-E210, which bundles both parts together.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10348\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAre the EX130 and VPL-EX130 the same projector?\u003c\/strong\u003e\u003cbr\u003eYes. Sony used both names for the same model depending on the market, and LMP-E210 fits either badge. The rear panel of your projector will confirm which name yours carries if you want to double-check.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the LMP-E210 page show no power rating?\u003c\/strong\u003e\u003cbr\u003eSony has not published a wattage or hour figure for LMP-E210, so we have not stated one either rather than guess. Everything else about fitting and compatibility is unaffected by this gap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a cage part of this LMP-E210 order?\u003c\/strong\u003e\u003cbr\u003eNo, this is the bulb only. You fit it into your current housing, provided the cage and clips are intact. A separate listing with the housing included exists under the same LMP-E210 code.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit the bulb without damaging it?\u003c\/strong\u003e\u003cbr\u003eSwitch off and unplug the projector, then let it cool before opening the lamp bay. Handle LMP-E210 by its base rather than the glass, and seat it firmly enough that the housing door closes without force.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I be sure LMP-E210 is the right code for my unit?\u003c\/strong\u003e\u003cbr\u003eCheck the sticker inside your projector's lamp compartment or on the old bulb itself against LMP-E210. This is more reliable than going by the projector's model name alone, since Sony badged the same lamp under two names.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182580805868,"sku":"LA-10348","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-e210-projector-lamp-module","title":"LMP-E210 projector lamp with module","description":"\u003cp\u003eThis listing pairs the LMP-E210 bulb with its housing as a single, ready-to-fit assembly for the Sony EX130, sold in some regions as the VPL-EX130. There is no need to separate bulb from housing, since the whole unit slots into the projector's lamp bay as one piece. Wattage and hour figures are not published for this code.\u003c\/p\u003e\u003cp\u003eChoose this module over the bare bulb if your current housing has cracked, discoloured or no longer clips in firmly, since both parts here are matched and supplied together. If your housing is still sound, the bare version of LMP-E210 is the cheaper option and only requires swapping the bulb itself.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10349\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the benefit of buying the module over the bare bulb?\u003c\/strong\u003e\u003cbr\u003eThe module includes a new housing as well as the bulb, so there is nothing to inspect or reuse from your old unit. It costs more than the bare bulb but removes any doubt about the housing's condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit both the EX130 and VPL-EX130?\u003c\/strong\u003e\u003cbr\u003eYes, both names refer to the same Sony projector, and LMP-E210 fits either one. Check your unit's rear label if you want to confirm which designation applies to yours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit this module correctly?\u003c\/strong\u003e\u003cbr\u003ePower down and unplug the projector, allow it to cool, then remove the old assembly from the lamp bay and slot this one in, using the same catches or screws. It should sit flush before the compartment door closes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a risk of buying the wrong part?\u003c\/strong\u003e\u003cbr\u003eThe main risk is confusing this module listing with the bare-bulb version, since both use the LMP-E210 code. Check whether your existing housing needs replacing before choosing between the two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I do once the new lamp is fitted?\u003c\/strong\u003e\u003cbr\u003eAfter installing LMP-E210, power the projector on to confirm the picture is normal, then use the projector's own menu to clear any lamp warning it may still be showing from the old bulb.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182581526764,"sku":"LA-10349","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/35164-xl.png?v=1786965258"},{"product_id":"lmp-s120-projector-lamp","title":"LMP-S120 bare projector lamp","description":"\u003cp\u003eLMP-S120 is a 120-watt bulb with an expected 2000-hour life, sold without a housing for the Sony FE100E, FE100U, FE110U and FX200U. Each of these is also listed under its VPL-prefixed name, such as the VPL-FE110U, and LMP-S120 fits both naming conventions equally.\u003c\/p\u003e\u003cp\u003eAs a bare bulb, LMP-S120 needs to be fitted into a housing you already own, so check that the cage and retaining clips on your current lamp are undamaged before ordering. If they are not, the module version with housing included avoids the need to reuse worn parts.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10350\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat models take the LMP-S120 lamp?\u003c\/strong\u003e\u003cbr\u003eThis lamp fits the Sony FE100E, FE100U, FE110U and FX200U, along with their VPL-prefixed equivalents including the VPL-FE100U and VPL-FX200U. Check your projector's rear panel for the exact name if several look similar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is LMP-S120 expected to last?\u003c\/strong\u003e\u003cbr\u003eIt carries a 120-watt rating and roughly 2000 hours of expected working life, though actual results depend on ventilation and how consistently the projector is used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs my existing FE100 cage suitable for holding the new LMP-S120?\u003c\/strong\u003e\u003cbr\u003eYes, provided it is not cracked and the clips still hold securely. LMP-S120 is supplied as the bulb only, so it is designed to be fitted straight into your existing cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the safest way to remove the old lamp first?\u003c\/strong\u003e\u003cbr\u003eUnplug the projector and give it time to cool fully, since the lamp compartment can stay hot for some time after use. Release the housing using the catches shown in your projector's manual before lifting the old bulb clear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I make sure LMP-S120 is genuinely compatible with my unit?\u003c\/strong\u003e\u003cbr\u003eMatch the code on your existing lamp, or the one printed inside the lamp bay, against LMP-S120. This is more dependable than relying on the projector's model name alone, since Sony used both short and VPL-prefixed names for the same unit.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182582378732,"sku":"LA-10350","price":213.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23857-lg.png?v=1786957094"},{"product_id":"xl-2300-projector-lamp-module","title":"XL-2300 projector lamp with module","description":"\u003cp\u003eXL-2300 is the complete lamp assembly for the Sony KDF-55WF655K and KDF-60WF655K rear-projection televisions, along with the KF-WS60 and KF-WS60S1. Bulb and housing arrive together as one unit, so there is no need to strip an old housing down before fitting the replacement. No wattage or hour rating is published for this code.\u003c\/p\u003e\u003cp\u003eBecause this covers four closely related Sony models, check the exact designation printed on the back of your set, since the WS60 and WS60S1 can otherwise be mixed up. XL-2300 is supplied only as the full module here, so there is no bare-bulb alternative listed under this code for these sets.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10882\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich Sony sets take the XL-2300 lamp?\u003c\/strong\u003e\u003cbr\u003eThis module fits the KDF-55WF655K, KDF-60WF655K, KF-WS60 and KF-WS60S1. These model numbers are printed on the rear panel of the television, which is the most reliable way to confirm which one you own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the bulb alone or a complete assembly?\u003c\/strong\u003e\u003cbr\u003eXL-2300 here is the complete module, with the bulb already fitted into its housing. You remove the old assembly from the set and install this one in its place, without handling the bulb separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat precautions should I take when replacing the lamp?\u003c\/strong\u003e\u003cbr\u003eSwitch the television off and unplug it, then wait for it to cool before opening the lamp access panel, usually on the rear or underside. Handle the new module by its casing rather than any exposed glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know this is the correct part number?\u003c\/strong\u003e\u003cbr\u003eWe list this lamp under the single code XL-2300 for these four Sony models. Checking the code against your old lamp, where visible, or against your set's model number is the surest way to confirm the match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I expect after fitting a new lamp module?\u003c\/strong\u003e\u003cbr\u003eOnce XL-2300 is installed, the set should power on and display normally. Some Sony models show a lamp-related message on screen until it is cleared through the on-screen setup menu.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182583165164,"sku":"LA-10882","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/35538-xl.png?v=1786965455"},{"product_id":"lmp-600-projector-lamp-module","title":"LMP-600 projector lamp with module","description":"\u003cp\u003eLMP-600 is rated at 120 watts with roughly 2000 hours of expected life, supplied as a complete bulb-and-housing assembly. It spans an unusually wide set of older Sony projectors, from the S600M and S900U through the SC50, SC60 and XC50, to the VPL-X1000 family and their VPL-prefixed equivalents.\u003c\/p\u003e\u003cp\u003eWith 26 model names sharing this one code, from S600M to VPL-X1000U, it is worth checking your projector's exact badge before ordering, since several near-identical names appear on this list. LMP-600 here is the full module for the S, SC and X1000 families described above, with housing included.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10878\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 26 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many Sony projectors take the LMP-600?\u003c\/strong\u003e\u003cbr\u003eThis single code covers 26 related models, including the S600M, S600U, S900U, SC50, SC50M, SC60, SC60M and the entire VPL-X1000 family, along with the XC50. Check your projector's model plate closely, as many of these names look alike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated output of this lamp?\u003c\/strong\u003e\u003cbr\u003eLMP-600 is rated at 120 watts with an expected life of around 2000 hours, based on typical projector use rather than continuous running throughout the day, so treat it as a working guide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to do anything to the old housing before fitting this?\u003c\/strong\u003e\u003cbr\u003eNo. This module arrives with the bulb already seated in its housing, so you remove the old assembly as a whole and fit this one in its place without transferring any parts between them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I avoid picking the wrong model from such a long list?\u003c\/strong\u003e\u003cbr\u003eLook for the exact model code on the underside or rear panel of your projector and match it letter for letter against the list here, since names like SC50 and SC50M refer to different units despite the similarity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check for safe handling once the lamp arrives?\u003c\/strong\u003e\u003cbr\u003eKeep the projector unplugged and cool before opening the lamp bay, and lift the module by its housing edges rather than any part that might flex or press on the bulb inside.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182583951596,"sku":"LA-10878","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/35301-xl.png?v=1786965276"},{"product_id":"lmp-d214-projector-lamp-module","title":"LMP-D214 projector lamp with module","description":"\u003cp\u003eLMP-D214 is the full lamp assembly for the Sony VPL-DW240, VPL-DX220, VPL-DX240 and VPL-DX270, with bulb and housing supplied together as one unit. The same lamp is also listed under the codes VPL-DW220, VPL-DW241, VPL-DX221, VPL-DX241 and VPL-DX271, so any of these references point to the identical part.\u003c\/p\u003e\u003cp\u003eIf you have seen this lamp referenced under one of its alternative codes, such as VPL-DX241 or VPL-DW220, there is no need to search further, since LMP-D214 is the same product listed here. No wattage or hour figures are published for this code, so match it by projector model and part reference instead.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11707\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eI've seen this lamp listed as VPL-DX241 elsewhere - is it the same?\u003c\/strong\u003e\u003cbr\u003eYes. VPL-DX241, along with VPL-DW220, VPL-DW241, VPL-DX221 and VPL-DX271, are all alternative references for the identical lamp we list as LMP-D214. Any of these codes should match this product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich projectors use this lamp?\u003c\/strong\u003e\u003cbr\u003eLMP-D214 fits the Sony VPL-DW240, VPL-DX220, VPL-DX240 and VPL-DX270. Check the model number on your projector's casing if you are unsure which of these four you own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this come as a full module or bulb only?\u003c\/strong\u003e\u003cbr\u003eThis listing is the complete module, with the bulb already fitted into its housing, ready to install as a single piece. There is no separate housing to source or fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit LMP-D214 into the projector?\u003c\/strong\u003e\u003cbr\u003ePower down and unplug the unit, let it cool, then release the lamp bay cover as shown in your projector's manual. Slide the old module out and this one in, then close the cover fully before powering on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the best way to confirm I'm ordering the right lamp?\u003c\/strong\u003e\u003cbr\u003eCompare the code on your existing lamp, whether it reads LMP-D214 or one of its alternative references, against the codes listed here. Matching by code is more reliable than going by projector model alone, since several close names exist in this range.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182585098476,"sku":"LA-11707","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28293-xl.png?v=1786959112"},{"product_id":"lmp-h280-projector-lamp-module","title":"LMP-H280 projector lamp with module","description":"\u003cp\u003eLMP-H280 is the complete lamp module for Sony's VPL-VW520, VPL-VW520ES, VPL-VW550ES, VPL-VW570ES, VPL-VW590ES, VPL-VW665ES, VPL-VW675ES, VPL-VW695ES and VPL-VW715ES. The same lamp is also referenced under the code VPL-VW55ES. Bulb and housing are supplied together, ready to fit as a single assembly.\u003c\/p\u003e\u003cp\u003eWith nine closely numbered models sharing this lamp, check the full designation on your projector, including the ES suffix, since the VW520 and VW520ES are treated as separate entries here despite the similar name. If you have seen the code VPL-VW55ES quoted for your unit, that refers to the same LMP-H280 lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11546\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 9 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich VW-series projectors take the LMP-H280?\u003c\/strong\u003e\u003cbr\u003eThis lamp fits the VPL-VW520, VPL-VW520ES, VPL-VW550ES, VPL-VW570ES, VPL-VW590ES, VPL-VW665ES, VPL-VW675ES, VPL-VW695ES and VPL-VW715ES. Check the full model code on your projector, including any ES suffix, to confirm the match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs VPL-VW55ES the same as this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, VPL-VW55ES is an alternative reference for the same lamp we list as LMP-H280. If your documentation quotes that code, this listing is the correct match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LMP-H280 for Sony's VW series come ready-built?\u003c\/strong\u003e\u003cbr\u003eIt does. LMP-H280 arrives as a complete module, with the bulb pre-fitted into its housing, so the whole assembly installs as one unit rather than requiring you to combine parts yourself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore sliding the LMP-H280 into a VPL-VW520, what preparation is needed?\u003c\/strong\u003e\u003cbr\u003eConfirm the power is disconnected and the projector has fully cooled, then follow the release catches on the lamp door as described in your Sony manual. Fit the new module the same way the old one came out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I tell these similarly named VW models apart?\u003c\/strong\u003e\u003cbr\u003eLook for the full code including any ES suffix, printed on the rear or underside of the projector. Models like VPL-VW520 and VPL-VW520ES are listed separately here despite the near-identical name.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182585917676,"sku":"LA-11546","price":183.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/21706-xl.png?v=1786956979"},{"product_id":"xl-5100u-projector-lamp","title":"XL-5100U bare projector lamp","description":"\u003cp\u003eXL-5100U is the bare bulb version of the lamp fitted to Sony's SXRD XL5100 rear-projection television. The same lamp also appears under the codes F93087600 and XL-5100, so if either of those has been quoted to you, they refer to this identical part supplied without a housing.\u003c\/p\u003e\u003cp\u003eSince this is the bulb only, your existing housing needs to be sound, as you will fit this bulb into the cage already in your set. If the housing itself is damaged, the module version listed under XL-5100 includes a new housing along with the bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11705\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat other codes does this lamp go by?\u003c\/strong\u003e\u003cbr\u003eF93087600 and XL-5100 both refer to the same lamp we list here as XL-5100U. If your set's documentation quotes either of those, this bare-bulb listing is the matching part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include a new lamp housing?\u003c\/strong\u003e\u003cbr\u003eNo, this listing is the bulb alone. You fit it into your existing housing, so check the cage and retaining clips are undamaged before ordering. A version with housing included is listed under the code XL-5100.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SXRD XL5100 the only set this fits?\u003c\/strong\u003e\u003cbr\u003eYes, this particular bare-bulb listing is matched to the Sony SXRD XL5100. If your set has a different model number, check our other listings, as related codes cover a wider range of sets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit the bulb without risking damage?\u003c\/strong\u003e\u003cbr\u003eUnplug the set and let it cool fully before opening the lamp compartment, usually found on the rear panel. Handle the bulb by its base and avoid pressing on the glass, then seat it fully in the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know I'm buying the genuine part?\u003c\/strong\u003e\u003cbr\u003eCheck the code on your old bulb, or the codes F93087600 or XL-5100 if that is what your documentation shows, against XL-5100U here. Matching by these printed codes is the most reliable check available.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182586736876,"sku":"LA-11705","price":190.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"xl-5100-projector-lamp-module","title":"XL-5100 projector lamp with module","description":"\u003cp\u003eXL-5100 is the complete lamp assembly for the Sony KDS-60R200A, KDS-R50XBR1, KDS-R60XBR1, KS-60R200A and SXRD XL5100. The bulb inside is the same one listed separately as XL-5100U, and the code F93087600 also refers to this same lamp, bundled here with a new housing.\u003c\/p\u003e\u003cp\u003eChoose this module if your set's current housing has cracked or the clips no longer hold, since the bulb and housing are supplied matched and ready to fit together. If the housing is still fine, the bare bulb alone is listed under XL-5100U and costs less to replace.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11706\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich Sony sets take this lamp module?\u003c\/strong\u003e\u003cbr\u003eXL-5100 fits the KDS-60R200A, KDS-R50XBR1, KDS-R60XBR1, KS-60R200A and the SXRD XL5100. Confirm your set's exact model number on its rear panel before ordering, since several similarly named KDS sets exist.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same lamp as the XL-5100U listing?\u003c\/strong\u003e\u003cbr\u003eThe bulb itself is identical, along with the code F93087600. The difference is that this listing includes a new housing, while XL-5100U is the bulb supplied on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included when I order the module?\u003c\/strong\u003e\u003cbr\u003eThe complete assembly, bulb and housing together, ready to fit into the lamp bay as a single unit. There is no need to source or reuse a housing separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I safely remove the old lamp first?\u003c\/strong\u003e\u003cbr\u003eUnplug the television and allow it to cool, then access the lamp compartment as shown in your set's manual, usually on the rear panel. Release the old assembly using its catches before fitting the replacement the same way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I make sure this matches my set exactly?\u003c\/strong\u003e\u003cbr\u003eCheck your set's full model number, such as KDS-R50XBR1 or KS-60R200A, against the list here, and compare any code printed on your old lamp against XL-5100, XL-5100U or F93087600, all of which refer to this lamp.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182587457772,"sku":"LA-11706","price":131.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/33924-xl.png?v=1786962593"},{"product_id":"lmp-m200-projector-lamp-module","title":"LMP-M200 projector lamp with module","description":"\u003cp\u003eRated at 200 watts with an expected 2000-hour life, LMP-M200 is the full lamp assembly for the Sony VPL-MX20 and VPL-MX25. Bulb and housing come supplied together, so the whole unit installs in one step rather than needing parts transferred from your old lamp.\u003c\/p\u003e\u003cp\u003eWith only two compatible models, checking whether your projector is the MX20 or MX25 mainly matters for your own records, since both use the identical LMP-M200 lamp. If your housing is undamaged and you would rather not pay for a new one, look for a bare-bulb listing under the same code.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the LMP-M200 fit both the MX20 and MX25?\u003c\/strong\u003e\u003cbr\u003eYes, both the Sony VPL-MX20 and VPL-MX25 use the identical LMP-M200 lamp, so there is no need to match your model beyond confirming it is one of these two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power figure does Sony assign the LMP-M200?\u003c\/strong\u003e\u003cbr\u003eLMP-M200 is rated at 200 watts with roughly 2000 hours of expected life under typical use, though actual results depend on ventilation and usage patterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a full new housing included with this listing?\u003c\/strong\u003e\u003cbr\u003eYes, this is the complete module, with the bulb already fitted into its housing. You are replacing the whole assembly rather than transferring a bulb into an existing cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the safe way to fit LMP-M200?\u003c\/strong\u003e\u003cbr\u003eSwitch off and unplug the projector, wait for it to cool, then release the lamp bay using the catches described in Sony's manual. Fit the new module the same way the old one was removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat changes in the picture warn that the LMP-M200 is wearing out?\u003c\/strong\u003e\u003cbr\u003eWatch for a dimmer or yellow-tinted picture, or a lamp warning shown by the projector itself. With a 2000-hour rating, heavier daily use will bring that point sooner than occasional use.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182588211436,"sku":"LA-11005","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28230-xl.png?v=1786959069"},{"product_id":"lmp-f330-projector-lamp-module","title":"LMP-F330 projector lamp with module","description":"\u003cp\u003eLMP-F330 is a 330-watt lamp rated for around 6000 hours, supplied as a complete module for Sony's VPL-F700HL, VPL-F700XL, VPL-FH500L and VPL-FX500L. These are large-venue projectors, and the bulb and housing arrive matched and ready to install as a single assembly.\u003c\/p\u003e\u003cp\u003eThe 6000-hour rating on LMP-F330 is notably higher than many smaller Sony lamps, reflecting the demands of the large-venue projectors it serves. Confirm which of the four compatible models you have, since F700HL, F700XL, FH500L and FX500L are separate units despite the shared lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 6,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich large-venue Sony projectors use LMP-F330?\u003c\/strong\u003e\u003cbr\u003eThis lamp fits the VPL-F700HL, VPL-F700XL, VPL-FH500L and VPL-FX500L. These are larger installation projectors, so check the model plate on the unit itself, which is usually more accessible than the on-screen menu on this class of machine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the 6000-hour rating compare to smaller lamps?\u003c\/strong\u003e\u003cbr\u003eIt is longer than many Sony lamps rated closer to 2000 hours, which suits the large-venue use these projectors are typically built for. As always, actual life depends on how the unit is run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need my own housing, or is one included?\u003c\/strong\u003e\u003cbr\u003eThe housing is included. LMP-F330 is supplied as a complete module, with the bulb pre-fitted, so there is nothing to transfer from your existing housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I be careful of when fitting a large lamp like this?\u003c\/strong\u003e\u003cbr\u003eThese lamps and their housings are larger and heavier than typical desktop projector lamps, so support the module fully while sliding it into place rather than letting it hang from one edge, and keep the unit unplugged and cool throughout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm I have the right model before ordering?\u003c\/strong\u003e\u003cbr\u003eCheck the exact designation on your projector's rating plate against VPL-F700HL, VPL-F700XL, VPL-FH500L or VPL-FX500L, since these four share the LMP-F330 code but are otherwise distinct projectors.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182589063404,"sku":"LA-11003","price":246.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/33941-xl.png?v=1786962592"},{"product_id":"lmp-q120-projector-lamp-module","title":"LMP-Q120 projector lamp with module","description":"\u003cp\u003eThis is the fully assembled LMP-Q120 lamp, bulb and housing supplied together for the Sony EF100E and FX200E, also sold as the VPL-EF100E and VPL-FX200E. No wattage or hour figures are published for this code, so the module installs based on matching the part number rather than a rated output.\u003c\/p\u003e\u003cp\u003eAt this price point the module includes a full housing, which suits a situation where the old cage has failed alongside the bulb. If your housing is still working and you only need the bulb, the bare version of LMP-Q120 is listed separately at a lower price.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does the module cost more than the bare bulb?\u003c\/strong\u003e\u003cbr\u003eThis listing includes a full replacement housing along with the bulb, supplied as one matched assembly, which is why it costs more than the bare-bulb version of LMP-Q120. Choose it if your existing housing needs replacing too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit both the EF100E and FX200E?\u003c\/strong\u003e\u003cbr\u003eYes, LMP-Q120 fits the Sony EF100E and FX200E, and the same lamp fits their VPL-prefixed equivalents, the VPL-EF100E and VPL-FX200E, since these are the same projectors under different naming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e\u003cbr\u003eThe complete LMP-Q120 assembly, with the bulb already fitted inside its housing. You remove the old unit from the projector and fit this one in its place as a single piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install this module correctly?\u003c\/strong\u003e\u003cbr\u003ePower off and unplug the projector, allow it to cool, then release the lamp compartment as shown in your manual. Fit the new module using the same catches or screws that held the old one, then close the cover fully.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check to confirm this is genuinely compatible?\u003c\/strong\u003e\u003cbr\u003eMatch the code on your existing lamp or the sticker inside the lamp bay against LMP-Q120. This is a more reliable check than the projector's model name alone, since Sony used both EF100E\/FX200E and VPL-prefixed names for the same units.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182589915372,"sku":"LA-11006","price":471.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"xl-2000-projector-lamp-module","title":"XL-2000 projector lamp with module","description":"\u003cp\u003eXL-2000 is the complete lamp module for a wide set of older Sony rear-projection televisions, including the KF-40SX200, KF-42SX100, KF-42SX200, KF-50SX100, KF-50SX200, KF-50XBR800, KF-60DX100, KF-60XBR800, KP-50XBR800 and KP-XR43TW1. The same lamp is also referenced under the codes A1484885A, A1601753A and XL-2000U.\u003c\/p\u003e\u003cp\u003eIf your set's manual or an old invoice quotes A1484885A, A1601753A or XL-2000U, these all point to the identical lamp listed here as XL-2000. With ten compatible model numbers, checking the exact code on the back of your set is worth doing before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10382\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich Sony rear-projection TVs use the XL-2000?\u003c\/strong\u003e\u003cbr\u003eThis lamp fits the KF-40SX200, KF-42SX100, KF-42SX200, KF-50SX100, KF-50SX200, KF-50XBR800, KF-60DX100, KF-60XBR800, KP-50XBR800 and KP-XR43TW1. Check the model number on the back panel of your set to confirm which of these applies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eI've seen A1484885A quoted for my set - is that this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, A1484885A is one of several alternative references for this lamp, alongside A1601753A and XL-2000U. All of them describe the identical part listed here as XL-2000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the XL-2000 here a bulb-plus-housing package?\u003c\/strong\u003e\u003cbr\u003eIt is. XL-2000 here is supplied as a complete module, bulb and housing together, ready to install as a single assembly rather than requiring you to reuse the old housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I safely access the lamp on an older rear-projection set?\u003c\/strong\u003e\u003cbr\u003eUnplug the television and let it cool, then locate the lamp access panel, usually on the rear or underside as described in your set's manual. Handle the module by its housing rather than any exposed glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm this is the right lamp for my set?\u003c\/strong\u003e\u003cbr\u003eMatch your set's model number against the list here, and compare any code on your old lamp, whether it reads XL-2000, XL-2000U, A1484885A or A1601753A, since all four describe this same part.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182590767340,"sku":"LA-10382","price":250.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28544-xl.png?v=1786959127"},{"product_id":"lmp-c160-projector-lamp-module","title":"LMP-C160 projector lamp with module","description":"\u003cp\u003eLMP-C160 is the full lamp assembly for the Sony CX11, listed elsewhere as the VPL-CX11. Both names refer to the same projector, and this module supplies the bulb already fitted into its housing, so the whole unit installs as one piece without any parts to transfer.\u003c\/p\u003e\u003cp\u003eNo wattage or hour rating has been published for LMP-C160, so match this lamp by the part code printed inside your projector rather than a specification figure. If your existing housing is intact, a bare-bulb version may be available separately at a lower cost.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10338\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAre the CX11 and VPL-CX11 the same projector?\u003c\/strong\u003e\u003cbr\u003eYes, Sony used both names for the same model, and LMP-C160 fits either one. The rear panel of your projector will confirm which name applies to your specific unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included with the LMP-C160 module?\u003c\/strong\u003e\u003cbr\u003eThe complete assembly, with the bulb already seated in its housing. You take out the old unit and fit this one in its place, without needing to combine parts yourself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the LMP-C160 page leave the power spec blank?\u003c\/strong\u003e\u003cbr\u003eA wattage or hour rating has not been published for LMP-C160, so we have left it out rather than estimate one. Fitting and compatibility are unaffected by this missing figure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I fit this lamp module?\u003c\/strong\u003e\u003cbr\u003eDisconnect the projector and let it cool fully, then release the lamp compartment cover following your projector's manual. Slide the new module in using the same catches that held the old one, and close the cover securely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I check I'm ordering the correct part?\u003c\/strong\u003e\u003cbr\u003eCompare the code printed inside your projector's lamp bay, or on the old lamp itself, against LMP-C160. This is the most reliable check, since Sony badged this same model under two different names.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182591586540,"sku":"LA-10338","price":130.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/24810-xl.png?v=1786958284"},{"product_id":"lmp-c132-projector-lamp-module","title":"LMP-C132 projector lamp with module","description":"\u003cp\u003eThis module pairs the 132-watt LMP-C132 bulb, rated for around 2000 hours, with a new housing, supplying both as one ready-to-fit assembly for the Sony CX10 and its VPL-CX10 equivalent. There is no need to separate the bulb from an old housing at any stage.\u003c\/p\u003e\u003cp\u003eChoose this module over the bare-bulb listing if your existing housing has cracked or the retaining clips no longer hold securely, since both parts here arrive matched. If your housing is still sound, the bare version of LMP-C132 is available at a lower price.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 132 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10874\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between this and the bare LMP-C132 listing?\u003c\/strong\u003e\u003cbr\u003eThis listing includes a new housing along with the bulb, supplied as one assembly. The bare-bulb listing under the same code is the lamp only, meant for fitting into a housing you already own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the watt and hour figures for this lamp?\u003c\/strong\u003e\u003cbr\u003eLMP-C132 is rated at 132 watts with an expected life of around 2000 hours under typical use, though ventilation and usage patterns affect how close you get to that figure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit the VPL-CX10 as well as the CX10?\u003c\/strong\u003e\u003cbr\u003eYes, both names describe the same Sony projector, and LMP-C132 fits either badge without any difference in fitting or specification. Check your rear panel only if you want to confirm which one you own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the correct sequence for installing the LMP-C132 in a VPL-CX10?\u003c\/strong\u003e\u003cbr\u003eUnplug the projector and let it cool, then release the lamp bay cover as described in your manual. Fit the new module using the original catches, avoiding contact with the bulb's glass surface during handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen is it worth paying for the module over the bare bulb?\u003c\/strong\u003e\u003cbr\u003eOnce the existing housing is cracked, discoloured or the clips no longer grip securely, paying for a matched housing and bulb together removes the guesswork of reusing a worn part.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182592372972,"sku":"LA-10874","price":128.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26833-xl.png?v=1786958817"},{"product_id":"lmp-c133-projector-lamp-module","title":"LMP-C133 projector lamp with module","description":"\u003cp\u003eLMP-C133 is a 132-watt lamp rated for around 2000 hours, supplied here as a complete module for the Sony CS10, also sold as the VPL-CS10. Bulb and housing are fitted together already, so the replacement installs as a single unit rather than needing parts combined by hand.\u003c\/p\u003e\u003cp\u003eAt a lower price point than many of Sony's larger lamp assemblies, LMP-C133 still includes a full housing here, which suits anyone whose existing cage has failed. Confirm the CS10 or VPL-CS10 designation on your projector before ordering, since it is easy to confuse with the closely named CX10.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 132 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10875\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the CS10 different from the CX10 model?\u003c\/strong\u003e\u003cbr\u003eYes, despite the similar name, the CS10 and CX10 are separate Sony projectors that take different lamp codes. Check your model plate carefully, since LMP-C133 is matched specifically to the CS10 and VPL-CS10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage and lamp life does LMP-C133 carry?\u003c\/strong\u003e\u003cbr\u003eIt is rated at 132 watts with roughly 2000 hours of expected life, a figure based on typical use rather than continuous running, since heat and ventilation both affect the outcome.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the housing included in this price?\u003c\/strong\u003e\u003cbr\u003eYes, this listing is the full module, bulb and housing supplied together. There is no separate bare-bulb step required, and no old housing needs to be reused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install LMP-C133 safely?\u003c\/strong\u003e\u003cbr\u003ePower down and unplug the projector, wait for it to cool, then open the lamp compartment as shown in your manual. Fit the module using the same catches that held the previous lamp, avoiding contact with any glass surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat symptoms suggest my Sony CS10 is due a fresh LMP-C133?\u003c\/strong\u003e\u003cbr\u003eLook for a dimmer picture, colour shift, or a lamp warning from the projector itself. Given the 2000-hour rating, frequent daily use will reach that point sooner than occasional evening viewing.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182593257708,"sku":"LA-10875","price":54.63,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"lmp-h160-projector-lamp-module","title":"LMP-H160 projector lamp with module","description":"\u003cp\u003eLMP-H160 is the complete lamp assembly for Sony's AW10, AW10S, AW15, AW15KT and AW15S projectors, and their VPL-prefixed equivalents. Bulb and housing arrive fitted together, so the whole unit installs directly into the lamp bay without needing to transfer parts from your old lamp.\u003c\/p\u003e\u003cp\u003eWith five closely related model names sharing this code, from AW10 to AW15KT, checking your projector's exact suffix is worth the extra minute before ordering. No wattage or hour figures are published for LMP-H160, so match by the part code rather than a rated output.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10319\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich AW-series projectors use LMP-H160?\u003c\/strong\u003e\u003cbr\u003eThis lamp fits the Sony AW10, AW10S, AW15, AW15KT and AW15S, along with their VPL-prefixed names such as VPL-AW15KT. Check the suffix on your model closely, since AW15 and AW15S are treated as separate entries here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a new housing included with this module?\u003c\/strong\u003e\u003cbr\u003eYes, LMP-H160 is supplied as a complete assembly, with the bulb already fitted into its housing, ready to install as one piece rather than requiring separate parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is no wattage figure shown for this lamp?\u003c\/strong\u003e\u003cbr\u003eSony has not published a wattage or hour rating for LMP-H160, so none is stated here rather than estimated. This does not affect fitting or compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the steps for installing the LMP-H160 in an AW-series Sony?\u003c\/strong\u003e\u003cbr\u003eUnplug the projector and let it cool, then release the lamp bay cover following the steps in your manual. Slide the new module into place using the original catches, then close the cover before powering on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I be sure I'm ordering for the right model?\u003c\/strong\u003e\u003cbr\u003eMatch the exact suffix on your projector, such as AW10S or AW15KT, against the list here, and compare it with the code printed on your old lamp if it is still legible.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182594240748,"sku":"LA-10319","price":121.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23220-xl.png?v=1786957033"},{"product_id":"lmp-f280-projector-lamp-module","title":"LMP-F280 projector lamp with module","description":"\u003cp\u003eThe LMP-F280 is a complete lamp and housing unit built for the Sony VPL-F530H, VPL-F530W and VPL-F535W, along with the VPL-FH60, VPL-FH60B and VPL-FW60. Because the module includes its own housing, you remove the old assembly and drop this one straight in, without handling loose glass or wiring a bulb into an existing frame.\u003c\/p\u003e\u003cp\u003eThis part is also sold under the code VPL-FH60W, so if your old lamp is labelled that way, it is the same unit. Since this is the module version rather than a bare bulb, no separate housing purchase is needed. Check your projector model against the list above before ordering, as F530 and FH60 lamps are not interchangeable with other Sony ranges.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11799\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 6 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the LMP-F280 include the housing or just the bulb?\u003c\/strong\u003e\u003cbr\u003eIt is supplied as a complete module, meaning the bulb is already fitted inside its housing. You take out the old unit as a whole and fit this one in its place, so there is no need to transfer a bare bulb between housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sony projectors take the LMP-F280?\u003c\/strong\u003e\u003cbr\u003eThis lamp is listed for the Sony VPL-F530H, VPL-F530W, VPL-F535W, VPL-FH60, VPL-FH60B and VPL-FW60. If your projector is not one of these six models, this particular lamp will not be the correct fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs VPL-FH60W the same lamp as LMP-F280?\u003c\/strong\u003e\u003cbr\u003eYes. VPL-FH60W is an alternative code we list against the same part, so an order placed under either reference brings you the identical LMP-F280 module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I make sure this module suits my exact projector?\u003c\/strong\u003e\u003cbr\u003eMatch the exact model printed on your projector's casing or rating label against the compatibility list for this listing. Sony reuses similar model numbers across ranges, so checking the full code, including any letter suffix, avoids ordering a lamp built for a different series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat steps come before seating the LMP-F280 in a Sony VPL-F530H?\u003c\/strong\u003e\u003cbr\u003eConfirm the projector is unplugged and cool, then release the lamp compartment following your projector's manual. Handle the module by its frame rather than the glass, and seat it fully before securing any retaining screws.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182595092716,"sku":"LA-11799","price":277.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/37765-xl.png?v=1786965844"},{"product_id":"lmp-p200-projector-lamp","title":"LMP-P200 bare projector lamp","description":"\u003cp\u003eRated at 200 watts with a working life of 1,000 hours, the LMP-P200 is a bare bulb built to go inside your projector's existing housing rather than replace it. It covers ten Sony models: PX20, PX30, S50M, S50U and VW10HT, plus their VPL-prefixed equivalents. Reuse your current housing and fit just the bulb.\u003c\/p\u003e\u003cp\u003eSony sold this same lamp under the ten model names listed here, and we don't list any alternative part codes beyond LMP-P200 itself, so if that's the number on your old bulb, this is a straightforward match. Because it's a bare lamp, check that your housing is undamaged before fitting, since a bare bulb won't fix a cracked or worn housing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10388\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the LMP-P200 supplied bare or does it include a housing?\u003c\/strong\u003e\u003cbr\u003eIt's supplied bare, so it's built to fit inside the housing you already have. If your projector's housing is cracked or its socket is damaged, a bare bulb on its own won't resolve that.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sony models is the LMP-P200 rated for?\u003c\/strong\u003e\u003cbr\u003eIt's listed against ten models: the PX20, PX30, S50M, S50U and VW10HT, along with their VPL-prefixed names. All ten take the identical 200W, 1,000-hour bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp go by any other code?\u003c\/strong\u003e\u003cbr\u003eNo, we list this bulb under a single reference, LMP-P200. If an old lamp in your projector shows a different number, it's worth checking that it's genuinely the same part before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should the LMP-P200 last before it needs replacing?\u003c\/strong\u003e\u003cbr\u003eIt carries a working life of 1,000 hours. Once a projector approaches that figure, image brightness typically starts to fade, which is usually the clearest sign it's due for a fresh bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between resetting the lamp counter and actually replacing the bulb?\u003c\/strong\u003e\u003cbr\u003eFitting a new LMP-P200 physically replaces the worn bulb, while resetting the counter in your projector's menu simply tells the projector a new lamp is in place. Both steps are usually needed after a swap so the hour count starts again accurately.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182595911916,"sku":"LA-10388","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-p260-projector-lamp","title":"LMP-P260 bare projector lamp","description":"\u003cp\u003eSony's PX35, PX40 and PX41 projectors, along with their VPL-prefixed versions, all share the same LMP-P260 bulb, rated at 265 watts with a 2,000-hour working life. This is a bare lamp, so it goes into the housing already fitted in your projector rather than arriving as a boxed unit of its own.\u003c\/p\u003e\u003cp\u003eWe only list one reference for this lamp, LMP-P260, so there's no alternative code to cross-check against an old bulb. Because it's a bare lamp rather than a module, it's worth inspecting your existing housing for cracks or a loose socket before fitting the new bulb, since damage there won't be fixed by the bulb alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 265 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10392\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 6 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill the LMP-P260 work in both the PX and VPL-PX versions of these projectors?\u003c\/strong\u003e\u003cbr\u003eYes. Sony sold this projector range under both the plain PX names and the VPL-PX names, and the LMP-P260 is the correct bulb for all six: PX35, PX40, PX41 and their VPL equivalents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LMP-P260 sold as a bare bulb?\u003c\/strong\u003e\u003cbr\u003eIt is. This listing is the bulb on its own, built to fit inside the housing already in your PX35, PX40 or PX41, rather than a housing-and-bulb unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage and lamp life does the LMP-P260 have?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 265 watts with a 2,000-hour working life, roughly double the life of some smaller Sony bare lamps in this family, so it suits heavier daily use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you list any alternative codes for the LMP-P260?\u003c\/strong\u003e\u003cbr\u003eNo, we carry this lamp under a single part number, LMP-P260. If your old bulb is marked differently, it's worth confirming your projector model against the compatibility list before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it mean for a replacement lamp to be original?\u003c\/strong\u003e\u003cbr\u003eAn original lamp uses the same manufacturer part number the projector was designed around, in this case LMP-P260, rather than a rebuilt or third-party bulb sold under a different reference.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182597058796,"sku":"LA-10392","price":178.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-p200-projector-lamp-module","title":"LMP-P200 projector lamp with module","description":"\u003cp\u003eTen Sony projectors take the LMP-P200: PX20, PX30, S50M, S50U, VW10HT and the VPL-prefixed version of each. This listing is the complete module, meaning a 200-watt, 1,000-hour bulb arrives already seated in its housing, so you swap out the whole assembly rather than transferring a bare bulb into your existing frame.\u003c\/p\u003e\u003cp\u003eThis is the module version, distinct from the bare LMP-P200 bulb we also list; choose this one if your old housing is worn, cracked, or you'd simply rather not handle the bulb directly. We list a single code for this part, LMP-P200, across all ten compatible models, so there's no alternate number to check.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10389\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between this LMP-P200 listing and the bare bulb version?\u003c\/strong\u003e\u003cbr\u003eThis one is the full module: the bulb is pre-fitted inside a housing, and you replace the entire assembly. The bare version is the bulb alone, meant to go inside a housing you already own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich ten Sony projectors take the LMP-P200 module?\u003c\/strong\u003e\u003cbr\u003ePX20, PX30, S50M, S50U and VW10HT, together with the VPL-prefixed name for each of those five models, giving ten model names in total for this one module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy might I choose the module over the bare bulb?\u003c\/strong\u003e\u003cbr\u003eIf your existing housing is damaged, discoloured, or you'd prefer not to handle a bare bulb directly, the module replaces both parts in one go rather than reusing the old housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there more than one part number for this module?\u003c\/strong\u003e\u003cbr\u003eWe list it under one reference only, LMP-P200, the same code used for the bare bulb version. The listings differ by whether a housing is included, not by part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I check I'm ordering the right lamp for my Sony projector?\u003c\/strong\u003e\u003cbr\u003eLook for the exact model printed on your projector, such as PX20 or VPL-S50U, and match it against the compatibility list here. Sony's PX and S50 ranges use closely related model numbers, so the full code matters.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182597910764,"sku":"LA-10389","price":125.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/35247-xl.png?v=1786965277"},{"product_id":"lmp-p201-projector-lamp","title":"LMP-P201 bare projector lamp","description":"\u003cp\u003eTwelve Sony projectors are built around the LMP-P201 bulb: the PX21, PX31 and PX32, the VW11, VW11HT and VW12HT, and the VPL-prefixed name of each. It's a 200-watt bulb with a 1,000-hour working life, supplied bare so it fits inside the housing your projector already has rather than as a boxed lamp-and-housing unit.\u003c\/p\u003e\u003cp\u003eLMP-P201 is closely related to the LMP-P200 used in Sony's PX20 range, but the two are not interchangeable, since each is matched to a different set of projector models; check the twelve models listed here before ordering. We list a single part number for this bulb, so an old lamp marked LMP-P201 is a direct match.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10390\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 12 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs LMP-P201 the same lamp as LMP-P200?\u003c\/strong\u003e\u003cbr\u003eNo. The two codes look similar and both run at 200 watts, but they're matched to different Sony projector families, so fitting the wrong one means the lamp won't be correct for your model. Check your exact projector name before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich twelve Sony models use the LMP-P201?\u003c\/strong\u003e\u003cbr\u003eThe PX21, PX31 and PX32, the VW11, VW11HT and VW12HT, and the VPL-prefixed version of each of those six model names, twelve in total sharing this one bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LMP-P201 come with a housing?\u003c\/strong\u003e\u003cbr\u003eNo, this listing is the bare bulb only, designed to fit inside the housing already installed in your PX or VW projector, so no separate housing is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I tell my lamp needs replacing rather than just cleaning?\u003c\/strong\u003e\u003cbr\u003eA fading or dimming picture, a lamp warning light, or the projector shutting down after warming up are the usual signs. Cleaning filters can help brightness in some cases, but once a bulb nears the end of its 1,000-hour life, replacement is the fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I handle the LMP-P201 bulb with bare hands?\u003c\/strong\u003e\u003cbr\u003eIt's best avoided. Oils from skin can mark the glass and shorten a lamp's life once it heats up, so hold the bulb by its base or fitting where possible and keep the glass itself clean.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182598729964,"sku":"LA-10390","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-p120-projector-lamp","title":"LMP-P120 bare projector lamp","description":"\u003cp\u003eThe LMP-P120 is a 120-watt bare bulb rated for a 2,000-hour working life, made specifically for the Sony PX1, also sold as the VPL-PX1. Unlike the higher-wattage PX20 and PX21 lamps in Sony's range, this one covers a single projector model under two names, so compatibility here is straightforward rather than spread across a long list.\u003c\/p\u003e\u003cp\u003eThis bulb goes inside the housing already fitted in your PX1, so no separate housing purchase is needed. We list it under one code, LMP-P120, covering both the plain PX1 name and the VPL-PX1 name Sony also used for the same projector. If your old lamp shows either marking, this is the right part.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10387\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the LMP-P120 only for the Sony PX1?\u003c\/strong\u003e\u003cbr\u003eYes, this bulb is matched to a single projector, sold by Sony under two names: the PX1 and the VPL-PX1. Both refer to the same model and take the identical lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage and lifespan does the LMP-P120 have?\u003c\/strong\u003e\u003cbr\u003eIt runs at 120 watts with a rated working life of 2,000 hours, longer than several of the higher-wattage bare bulbs in Sony's PX range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes my PX1's current housing stay in service with the LMP-P120?\u003c\/strong\u003e\u003cbr\u003eYes. The LMP-P120 is supplied as a bare bulb, meant to be fitted into the housing already inside your PX1 rather than replacing the housing itself, so your current housing stays in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre PX1 and VPL-PX1 different projectors?\u003c\/strong\u003e\u003cbr\u003eThey're the same projector under two model names Sony used for it, so a lamp listed for one applies equally to the other model name too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there much to verify before ordering the LMP-P120?\u003c\/strong\u003e\u003cbr\u003eJust confirm the model printed on your projector reads PX1 or VPL-PX1. Since this lamp is matched to that one model, there's no need to compare against a longer list of similar-sounding codes.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182599713004,"sku":"LA-10387","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32370-lg.png?v=1786960464"},{"product_id":"lmp-h230-projector-lamp-module","title":"LMP-H230 projector lamp with module","description":"\u003cp\u003eThree projectors from Sony's home cinema VW range share the LMP-H230 lamp: the VPL-VW300ES, VPL-VW350ES and VPL-VW67ES. This is the full module, with the bulb already fitted inside its own housing, so the complete assembly is removed and replaced as one piece rather than swapped bulb-by-bulb into an old frame.\u003c\/p\u003e\u003cp\u003eWe list this part under a single reference, LMP-H230, across all three compatible models, so there's no alternative code to match against an old lamp. Because it's the module version rather than a bare bulb, check that the retaining clips and connector on your old unit match before removing it, and keep the new module's connector aligned the same way when fitting.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10417\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich Sony home cinema projectors take the LMP-H230?\u003c\/strong\u003e\u003cbr\u003eThe VPL-VW300ES, VPL-VW350ES and VPL-VW67ES all use this lamp. It isn't listed as compatible with other VW-series models outside these three, so check your exact model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LMP-H230 a full module or a bare bulb?\u003c\/strong\u003e\u003cbr\u003eIt's the complete module, meaning the bulb comes already fitted inside a housing, so you fit the whole unit rather than transferring a bulb into your existing housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy doesn't this listing state a wattage or lamp life?\u003c\/strong\u003e\u003cbr\u003eWe only publish the specification figures we can confirm for a given part, and for the LMP-H230 we don't have those details listed, so we've left them out rather than estimate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you sell the LMP-H230 under any other part number?\u003c\/strong\u003e\u003cbr\u003eNo, we list this module under one code only, LMP-H230, for all three compatible VW-series projectors, with no alternative reference for you to cross-check against an old lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat counts as an original lamp for the VPL-VW300ES?\u003c\/strong\u003e\u003cbr\u003eAn original lamp is one built to the specific part number the projector was designed around, in this case LMP-H230, rather than a generic bulb sold as a fit for several different projector families.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182600401132,"sku":"LA-10417","price":162.66,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/30564-xl.png?v=1786959259"},{"product_id":"lmp-f250-projector-lamp","title":"LMP-F250 bare projector lamp","description":"\u003cp\u003eSony's FX50, also badged VPL-FX50, uses a single bare lamp: the LMP-F250. It's rated at 250 watts with a 1,000-hour working life and is supplied as the bulb alone, so it fits inside the housing your FX50 already has rather than arriving as a boxed housing-and-bulb unit.\u003c\/p\u003e\u003cp\u003eThis lamp covers just one projector under its two names, so there's no wider compatibility list to check, and we carry it under a single part number, LMP-F250. Because it's a bare bulb, inspect the housing already in your FX50 for cracks or a loose socket before fitting the replacement, since the bulb alone can't fix housing damage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 250 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10353\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the LMP-F250 fit any projector besides the FX50?\u003c\/strong\u003e\u003cbr\u003eAs far as we list, it's matched to just the FX50, sold under that name and as the VPL-FX50. It isn't listed against any other Sony model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LMP-F250 supplied with a housing?\u003c\/strong\u003e\u003cbr\u003eNo, it's a bare bulb, built to be fitted inside the housing already present in your FX50 rather than replacing that housing, so your existing housing stays in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the wattage and expected working life of this bulb?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 250 watts with a 1,000-hour working life, in line with several of Sony's bare bulbs from this era of FX-series projectors, used only in the FX50.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo FX50 and VPL-FX50 need different lamps?\u003c\/strong\u003e\u003cbr\u003eNo, they're the same projector under two names, and both take the LMP-F250, so the name printed on your particular unit doesn't change which lamp fits it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I handle a bare bulb like this during fitting?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully first, then lift the bulb by its base or frame rather than the glass envelope, since skin oils on the glass can shorten its working life once it heats up again.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182601318636,"sku":"LA-10353","price":178.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-h330-projector-lamp","title":"LMP-H330 bare projector lamp","description":"\u003cp\u003eThe VPL-GT100, VPL-VW1000 and VPL-VW1000ES from Sony all take the same LMP-H330 bulb, rated at 330 watts with a 2,000-hour working life. It's a bare lamp, meant to be fitted into the housing already installed in these projectors rather than supplied as a complete housing-and-bulb assembly.\u003c\/p\u003e\u003cp\u003eWe list a single reference for this bulb, LMP-H330, across all three compatible models, so an old lamp carrying that code is a straightforward match. As a bare lamp, it's worth checking the housing already fitted in your GT100 or VW1000 for cracks or wear before installing the replacement bulb, since the housing itself isn't part of this listing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10415\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich Sony projectors take the LMP-H330?\u003c\/strong\u003e\u003cbr\u003eThe VPL-GT100, VPL-VW1000 and VPL-VW1000ES all share this bulb. It isn't listed as compatible with other VW-series models outside these three, so confirm your exact model first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LMP-H330 the bare bulb or the full module?\u003c\/strong\u003e\u003cbr\u003eIt's the bare bulb, designed to fit inside the housing your GT100 or VW1000 already has, rather than a combined housing-and-bulb unit, so the existing housing is reused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the LMP-H330 rate for power draw and working hours?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 330 watts, with a working life of 2,000 hours, one of the higher-wattage bare bulbs we list for Sony's home cinema range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you list this lamp under any code besides LMP-H330?\u003c\/strong\u003e\u003cbr\u003eNo, we carry it under one part number only. If your old bulb shows a different reference, it's worth double-checking your exact projector model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen does a lamp like this typically need replacing?\u003c\/strong\u003e\u003cbr\u003eOnce a bulb nears its 2,000-hour working life, brightness usually starts to drop and colours can shift. A lamp warning indicator on the projector itself is often the clearest signal that it's time to fit a fresh one.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182602137836,"sku":"LA-10415","price":270.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-h150-projector-lamp-module","title":"LMP-H150 projector lamp with module","description":"\u003cp\u003eSony's HS2 and HS3, listed here alongside their VPL-HS2 and VPL-HS3 names, share the LMP-H150 module. The bulb arrives already fitted inside its housing, so fitting means removing the old assembly whole and dropping this one straight into its place, rather than transferring a bulb between housings.\u003c\/p\u003e\u003cp\u003eThis module covers four model names, HS2, HS3 and their VPL-prefixed equivalents, all under a single part number, LMP-H150. We don't list any alternative code for this lamp, so if the number on your old module reads LMP-H150, this listing is the direct match, regardless of which of the four names appears on your projector.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10877\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich projectors use the LMP-H150 module?\u003c\/strong\u003e\u003cbr\u003eThe Sony HS2 and HS3, along with the VPL-HS2 and VPL-HS3 names Sony also sold them under. All four refer to just two physical projector models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LMP-H150 supplied with its Sony housing already fitted?\u003c\/strong\u003e\u003cbr\u003eYes, the LMP-H150 is the complete module, with the bulb already seated inside a housing, so the whole assembly is replaced together rather than fitting a bare bulb alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is there no wattage listed for the LMP-H150?\u003c\/strong\u003e\u003cbr\u003eWe only publish specification figures we can confirm for a specific part, and that detail isn't listed for this one, so we've left it out rather than guess at a number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between HS2 and VPL-HS2?\u003c\/strong\u003e\u003cbr\u003eThey're the same projector, sold under two names by Sony, and both take the identical LMP-H150 module, so it doesn't matter which name appears on your unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat care should I take swapping the LMP-H150 into an HS2?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool down fully, then release the lamp door as described in your projector's manual. Handle the module by its housing rather than any exposed glass, and make sure it's seated fully before you secure the retaining screws.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182603022572,"sku":"LA-10877","price":155.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34796-xl.png?v=1786964308"},{"product_id":"lmp-e150-projector-lamp-module","title":"LMP-E150 projector lamp with module","description":"\u003cp\u003eSony's ES2 and EX2 projectors, and their VPL-ES2 and VPL-EX2 counterparts, take the LMP-E150 module: a 157-watt bulb rated for 3,000 hours, supplied already fitted inside its housing. Replacing the lamp means swapping out the complete assembly rather than working with a loose bulb.\u003c\/p\u003e\u003cp\u003eAt 3,000 hours, this is one of the longer-rated bulbs in Sony's entry-level projector range, and we list it under a single part number, LMP-E150, across all four compatible model names. Because it's a module, no separate housing is needed; the complete unit is designed to be lifted out and replaced as one piece.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 157 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10344\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the LMP-E150 rated to last?\u003c\/strong\u003e\u003cbr\u003eIt carries a 3,000-hour working life at its 157-watt rating, longer than many of the bare bulbs Sony fits to its higher-end PX and VW ranges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich four model names take this lamp?\u003c\/strong\u003e\u003cbr\u003eES2, EX2, VPL-ES2 and VPL-EX2. These refer to just two physical projectors, each sold under a plain name and a VPL-prefixed name, both taking the identical LMP-E150.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LMP-E150 supplied as a module or a bare bulb?\u003c\/strong\u003e\u003cbr\u003eIt's the module version, with the 157-watt bulb already fitted inside its housing, so you replace the complete unit rather than just the bulb, with no separate housing purchase needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you list any alternative part numbers for the LMP-E150?\u003c\/strong\u003e\u003cbr\u003eNo, we carry it under one code only. If your existing lamp is marked differently, check your projector's exact model before ordering to be sure it's the same part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does buying an original LMP-E150 actually mean?\u003c\/strong\u003e\u003cbr\u003eIt means the lamp is built to the same part number, LMP-E150, that Sony's ES2 and EX2 projectors were designed to take, rather than a generic bulb marketed as a general-purpose fit.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182604005612,"sku":"LA-10344","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/35419-xl.png?v=1786965450"},{"product_id":"lmp-f230-projector-lamp-module","title":"LMP-F230 projector lamp with module","description":"\u003cp\u003eTwo Sony projectors, the VPL-F400X and VPL-FX30, both take the LMP-F230 module, a 230-watt bulb with a 4,000-hour working life, supplied already fitted inside its own housing. You lift out the old assembly complete and fit this one in its place rather than transferring a bare bulb across.\u003c\/p\u003e\u003cp\u003eAt 4,000 hours, the LMP-F230 has one of the longer working lives among the lamps we list for Sony's F-series projectors. We carry it under a single part number, so there's no alternative code to check against your old lamp; if your projector is the F400X or FX30, this module is the match.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 230 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 4,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10412\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich two Sony projectors take the LMP-F230?\u003c\/strong\u003e\u003cbr\u003eThe VPL-F400X and VPL-FX30. This module isn't listed as compatible with any other Sony F-series model, so check your exact projector name carefully before placing an order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the rated life of the LMP-F230?\u003c\/strong\u003e\u003cbr\u003e4,000 hours at 230 watts, which is longer than several other Sony F-series lamps we stock, making it one of the longer-lasting modules in this range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a bare bulb or does it come with a housing?\u003c\/strong\u003e\u003cbr\u003eIt's the complete module, with the bulb pre-fitted inside a housing, so the entire assembly is what you receive and fit, rather than a bare bulb alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCould my old F400X or FX30 lamp carry a code other than LMP-F230?\u003c\/strong\u003e\u003cbr\u003eNot that we list. LMP-F230 is the single reference we carry for both the F400X and FX30, so there's no alternate code to check against your old lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I make sure this module is seated correctly during fitting?\u003c\/strong\u003e\u003cbr\u003eLine up the connector and guide pins on the base of the module with those in the projector's lamp bay, then press it home evenly before securing the retaining screws, checking it doesn't sit at an angle.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182604824812,"sku":"LA-10412","price":131.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34276-xl.png?v=1786962716"},{"product_id":"a-1501-247-a-projector-lamp-module","title":"A-1501-247-A projector lamp with module","description":"\u003cp\u003eThe A-1501-247-A is the lamp module built for the Sony KL-37W1U, KL-W7000, KL-W7000A, KL-W9000 and KL-W9000A. It's supplied complete, with the bulb already fitted inside its housing, so the whole assembly is removed and replaced as a single unit rather than handled as a loose bulb.\u003c\/p\u003e\u003cp\u003eSony also sold this same part under five other codes: XL-100, XL-100C, XL-100E, XL-100J and XL-100U. If the sticker on your old lamp shows any of those instead of A-1501-247-A, it's still the identical module, and any of the six references will bring you the same part.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11924\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is XL-100 and how does it relate to A-1501-247-A?\u003c\/strong\u003e\u003cbr\u003eXL-100, along with XL-100C, XL-100E, XL-100J and XL-100U, are alternative codes for the exact same lamp module. Whichever of the six numbers appears on your old lamp, ordering under A-1501-247-A gets you the identical part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sony models take this lamp?\u003c\/strong\u003e\u003cbr\u003eThe KL-37W1U, KL-W7000, KL-W7000A, KL-W9000 and KL-W9000A. It isn't listed as a fit for other Sony models, so check your exact model name before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the A-1501-247-A include the lamp housing?\u003c\/strong\u003e\u003cbr\u003eYes, this is the complete module, bulb and housing together, so you replace the entire unit rather than just a bare bulb, with nothing further to fit separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy aren't the wattage and lamp life shown for this part?\u003c\/strong\u003e\u003cbr\u003eWe list specification figures only where we can confirm them for the exact part, and those details aren't available for the A-1501-247-A, so we've left them off rather than estimate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the hour counter cleared on Sony KL-W sets after fitting the A-1501-247-A?\u003c\/strong\u003e\u003cbr\u003eMost KL-W models have a lamp-hour counter that can be cleared from the on-screen setup menu once the new module is fitted; check your specific model's manual for the exact menu path, as this varies across the range.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182605775084,"sku":"LA-11924","price":155.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"l129-projector-lamp","title":"L129 bare projector lamp","description":"\u003cp\u003eThe L129 is a 130-watt bare bulb built for a projector platform sold under seven different brand names: Eizo, Knoll, Lightware, Mitsubishi, Philips, Plus and Sony. Rated for 1,000 hours, it fits inside the housing your projector already has, and the same physical lamp serves forty-eight rebadged models across those brands.\u003c\/p\u003e\u003cp\u003eBecause so many resellers put their own name on this projector platform, we also list the lamp under alternative codes including LCA3113, LCA3119, LMP-M130, VLT-X30LP, VLT-XD20LP and 28-390, along with U3-130, the model number stamped on several of the badge-engineered units themselves. If your old lamp carries any of these, it's the same part as the L129.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 130 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08975\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 48 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does the same lamp cover so many different brands?\u003c\/strong\u003e\u003cbr\u003eSeveral projector manufacturers bought in the same underlying platform and sold it under their own brand name, a common practice for entry-level models. The L129 is the lamp that platform uses, regardless of whose badge is on the case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are all the alternative codes for the L129?\u003c\/strong\u003e\u003cbr\u003eWe also list this lamp as 28-390, LCA3113, LCA3119, LMP-M130, VLT-X30LP, VLT-XD20LP and U3-130. Any of these refer to the same physical bulb, whichever brand's badge is on your projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith so many compatible projectors, how do I confirm mine is covered?\u003c\/strong\u003e\u003cbr\u003eCheck the full compatibility list on this page against the exact model printed on your projector, including brand. With forty-eight listed models across seven brands, it's worth matching the precise name rather than just the brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the L129 a bare bulb or a complete module?\u003c\/strong\u003e\u003cbr\u003eIt's the bare bulb, designed to fit inside the housing already built into your projector, rather than a combined housing-and-bulb assembly, regardless of which of the seven brands it's badged under.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the wattage and rated life of the L129?\u003c\/strong\u003e\u003cbr\u003e130 watts, with a working life of 1,000 hours, consistent across every branded version of this shared projector platform, from Eizo through to Sony and everything between.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182606758124,"sku":"LA-08975","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp-p120-projector-lamp-module","title":"LMP-P120 projector lamp with module","description":"\u003cp\u003eThis is the module version of the LMP-P120, built for the Sony PX1, also sold as the VPL-PX1. The 120-watt, 2,000-hour bulb arrives already fitted inside its own housing, so you replace the whole assembly rather than fitting a bare bulb into your existing housing.\u003c\/p\u003e\u003cp\u003eWe list the LMP-P120 bare bulb separately from this module listing; choose this one if your PX1's existing housing is damaged or you would rather not handle a loose bulb. Both versions share the same part number, LMP-P120, and cover the identical two projector names.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11629\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the bare LMP-P120 listing?\u003c\/strong\u003e\u003cbr\u003eThis is the complete module: the bulb comes already seated inside a housing, so you replace the entire assembly. The bare listing is the bulb alone, for fitting into a housing you already have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LMP-P120 module fit only the PX1?\u003c\/strong\u003e\u003cbr\u003eYes, it's matched to a single projector that Sony sold under two names, the PX1 and the VPL-PX1, so it isn't listed for any other Sony model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the wattage and rated life on this module?\u003c\/strong\u003e\u003cbr\u003e120 watts, with a working life of 2,000 hours, the same figures as the bare bulb version of this lamp, since both share the identical bulb inside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy might the module cost more than the bare bulb for the same lamp?\u003c\/strong\u003e\u003cbr\u003eThe module includes a full housing alongside the bulb, so you're paying for both parts rather than just the bulb, which is reflected in the price difference between the two listings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before fitting a replacement module?\u003c\/strong\u003e\u003cbr\u003eMake sure the projector has been switched off and left to cool, then remove the old assembly following your projector's manual. Line up the new module the same way the old one sat before securing it.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182607544556,"sku":"LA-11629","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/35391-xl.png?v=1786965456"}],"url":"https:\/\/www.lampsauthority.com\/collections\/sony-projector-lamps.oembed","provider":"Lamps Authority","version":"1.0","type":"link"}