{"title":"Sim2 projector lamps","description":"\u003cp\u003eReplacement projector lamps for Sim2 projectors — 20 lamps catalogued. Available as bare lamps (the bulb alone, fitted into the housing already in your projector) and as complete modules (bulb and housing together, ready to drop straight in).\u003c\/p\u003e\u003cp\u003eEvery lamp carries a genuine Philips, Osram or Ushio burner, ships free worldwide, and is covered by a 180-day guarantee. If you are not sure which your projector takes, check the code on the old lamp or send us a photo of the label.\u003c\/p\u003e","products":[{"product_id":"z930100320-projector-lamp","title":"Z930100320 bare projector lamp","description":"\u003cp\u003eZ930100320 is a bare lamp built to the OSRAM specification and shared across twenty-two Sim2 projectors, spanning the Domino, EV and HT ranges - from the DOMINO 18 and EV 150 up to the HT300EVO and SDV52 U251. It fits into the housing already inside each of these models.\u003c\/p\u003e\u003cp\u003eBecause each Sim2 model listed here shares the OSRAM version of the lamp, one code, Z930100320, covers the whole group rather than needing a separate part per model. No alternative part numbers are recorded for it, and a Philips-branded equivalent for the same projectors is listed separately.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10285\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 22 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does the code mention OSRAM rather than Sim2?\u003c\/strong\u003e\u003cbr\u003eOSRAM manufactures the lamp engine used inside this Sim2 fitting, so the bulb itself carries the OSRAM designation even though the projector is a Sim2 model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit every Sim2 Domino model?\u003c\/strong\u003e\u003cbr\u003eIt fits the OSRAM-equipped Domino variants specifically, including the DOMINO, DOMINO 18, DOMINO 20, 20H, 20WEH, 30 and 30H. Philips-equipped Domino projectors use a different lamp, listed separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my Sim2 projector uses the OSRAM or Philips lamp?\u003c\/strong\u003e\u003cbr\u003eThe lamp fitted originally to your projector, or a code printed on it, will show which type it takes. Checking that against the model list here, or against the Philips-branded listing, confirms the correct match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Z930100320 arrive housed, or as the burner on its own?\u003c\/strong\u003e\u003cbr\u003eIt is a bare lamp only, fitted into the housing already built into your Sim2 projector rather than arriving with a new housing attached as a full module would.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other part numbers for Z930100320?\u003c\/strong\u003e\u003cbr\u003eNo, this is the only code recorded for this OSRAM-specification lamp, so it is what to match against the marking on your existing bulb before placing an order.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182588047596,"sku":"LA-10285","price":144.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/21403-lg.png?v=1786956910"},{"product_id":"z930100325-projector-lamp","title":"Z930100325 bare projector lamp","description":"\u003cp\u003eFourteen Sim2 projectors share this one bare lamp: the D20, D20H, D30, D30H, D45, D55, Domino 45, Domino 55, Domino 55M, Grand Cinema RTX 45, RTX 55, RTX 55H, RTX 55TV and SD 67. Listed as Z930100325, it fits into the housing already built into each of these models.\u003c\/p\u003e\u003cp\u003eWith such a wide model list, checking your exact projector name against those above is the most reliable way to confirm fit, since Sim2 used closely related naming across several ranges. No alternative codes are recorded for Z930100325, so that single number is what to match against your old bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10284\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 14 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp cover so many different Sim2 model names?\u003c\/strong\u003e\u003cbr\u003eSim2 built the D-series, Domino and Grand Cinema RTX ranges around the same lamp engine during this period, so a single bare bulb, Z930100325, serves all fourteen models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the D45 lamp the same as the one used in the Grand Cinema RTX 45?\u003c\/strong\u003e\u003cbr\u003eYes, both the D45 and the Grand Cinema RTX 45 use Z930100325, along with twelve other models in the D, Domino and RTX ranges listed here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SD 67 use the same lamp as the smaller D-series models?\u003c\/strong\u003e\u003cbr\u003eYes, the SD 67 is included in the same lamp fitting as the D20 through D55 and the Domino and RTX models, all taking Z930100325.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Z930100325 order cover a cage as well as the burner?\u003c\/strong\u003e\u003cbr\u003eNo, it is a bare bulb only, intended for fitting into the housing already inside your Sim2 projector rather than replacing the housing itself with a new one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering, given how many models this covers?\u003c\/strong\u003e\u003cbr\u003eMatch the exact model name on your projector, such as D30H or RTX 55TV, against the list here, and compare Z930100325 to any code on your existing bulb if one is visible.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182588866796,"sku":"LA-10284","price":121.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25688-lg.png?v=1786958516"},{"product_id":"933794630-projector-lamp","title":"933794630 bare projector lamp","description":"\u003cp\u003eThe Sim2 DOMINO D60 is the only projector matched to this lamp, listed as 933794630. It runs at 200 watts and carries a rated life of 2,500 hours, and is supplied as a bare bulb for fitting into the housing already built into the projector.\u003c\/p\u003e\u003cp\u003eNo alternative part numbers are recorded for 933794630, so this single code is what to check against the marking on your existing bulb. Because it is a bare lamp rather than a full module, the housing inside your DOMINO D60 stays in place and only the bulb itself is exchanged.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10289\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 933794630 draw in power, and how long does it run?\u003c\/strong\u003e\u003cbr\u003eIt runs at 200 watts and is rated for 2,500 hours. Checking the lamp-hours counter in your DOMINO D60's menu against this figure is a good way to judge when replacement is due.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 933794630 fit any other Sim2 projector besides the DOMINO D60?\u003c\/strong\u003e\u003cbr\u003eNo, this lamp is matched to the DOMINO D60 specifically. Other Sim2 Domino projectors use different lamp codes, so check your exact model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAm I buying the DOMINO D60's burner alone here, or a housed unit?\u003c\/strong\u003e\u003cbr\u003eThe burner alone. It is a bare lamp, designed to fit into the housing already built into your DOMINO D60 rather than arriving with a new housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reset the lamp-hour counter after fitting this bulb?\u003c\/strong\u003e\u003cbr\u003eThe DOMINO D60's on-screen menu includes a lamp-hours reset option, which should be run once the new bulb is fitted so usage is tracked accurately from zero again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat signs suggest the DOMINO D60's lamp is due for replacement?\u003c\/strong\u003e\u003cbr\u003eA dimmer or yellowing picture, or the projector nearing the 2,500 hour rated life, are both signs worth checking the lamp-hours counter for before deciding on a replacement.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182589489388,"sku":"LA-10289","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/24758-lg.png?v=1786958018"},{"product_id":"z930100701-projector-lamp","title":"Z930100701 bare projector lamp","description":"\u003cp\u003eThree Sim2 projectors take this same bare lamp: the DOMINO D80, DOMINO D80E and HT380. Sold as Z930100701, it fits into the housing already built into each of these models, so only the bulb itself needs replacing when picture quality starts to fade.\u003c\/p\u003e\u003cp\u003eThe D80E shares its lamp with the standard D80 despite the different model suffix, and the HT380 uses the identical part as well. No other part numbers are recorded for Z930100701, so that is the code to match against your existing bulb before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10292\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the D80E use a different lamp from the standard D80?\u003c\/strong\u003e\u003cbr\u003eNo, both the DOMINO D80 and D80E take the same bare lamp, Z930100701, despite the different model suffix used to describe each version of the projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the HT380 share a lamp code with the DOMINO D80?\u003c\/strong\u003e\u003cbr\u003eSim2 built the HT380 around the same lamp engine as the DOMINO D80 and D80E, so all three of these projectors use the identical bare bulb, Z930100701.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Z930100701 come pre-mounted in a cage?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare bulb only, intended for fitting into the housing already inside your DOMINO D80, D80E or HT380 rather than arriving with a new one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is worth confirming before placing a Z930100701 order?\u003c\/strong\u003e\u003cbr\u003eConfirm your projector is one of the three models listed here, then compare Z930100701 against any code visible on your existing bulb before placing your order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I handle the new bulb during fitting?\u003c\/strong\u003e\u003cbr\u003eAvoid touching the glass directly, keep the projector unplugged and cooled beforehand, and support the bulb by its base as you seat it into the housing.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182590177516,"sku":"LA-10292","price":281.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26684-lg.png?v=1786958808"},{"product_id":"z930100703-projector-lamp","title":"Z930100703 bare projector lamp","description":"\u003cp\u003eThe C3X 1080 is the only Sim2 projector matched to this lamp, sold as Z930100703. It is a bare bulb, so it is fitted into the housing already built into the projector rather than replacing the housing as a whole unit.\u003c\/p\u003e\u003cp\u003eNo alternative codes are recorded for this part, so Z930100703 is the single number to check against your existing lamp before ordering. Because the C3X 1080 is a specific model within Sim2's range, confirming the projector name is worth doing alongside checking the part code.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10279\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the C3X 1080 lamp the same as other Sim2 C-series projectors?\u003c\/strong\u003e\u003cbr\u003eNo, Z930100703 is matched to the C3X 1080 specifically. Other models in Sim2's range use their own separate lamp codes, so check your exact projector name first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the Z930100703 replace my C3X 1080's housing as well?\u003c\/strong\u003e\u003cbr\u003eNo, it is a bare bulb only, meant to be fitted into the housing already built into your C3X 1080 rather than replacing that housing with a new one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should I expect this lamp to last?\u003c\/strong\u003e\u003cbr\u003eNo rated hours figure is recorded for this part, so the lamp-hours counter and lamp warning indicator on your C3X 1080 are the best guides for judging when replacement is due.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the correct way to remove the old bulb?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully, then access the lamp compartment as described in your manual and lift the old bulb from its housing by the base rather than the glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Z930100703 the only code I should look for on my old lamp?\u003c\/strong\u003e\u003cbr\u003eYes, no other part numbers are recorded for this fitting, so that single code is what confirms a correct match against the marking on your existing bulb.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182590898412,"sku":"LA-10279","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/21399-lg.png?v=1786956910"},{"product_id":"dt00171-projector-lamp-module","title":"DT00171 projector lamp with module","description":"\u003cp\u003eDT00171 is a 150 watt lamp-and-housing module used across four brands that shared engineering on this generation of projector: the Dukane Image Pro 8030, Hitachi CP-S830 and CP-S830J, Liesegang dv295, and the Sim2 SLC600. Despite the different badges, all five listed models take this identical lamp and housing.\u003c\/p\u003e\u003cp\u003eRated for 2,000 hours, this module is also catalogued under the code ZU0254044010, which some of these brands' documentation uses in place of DT00171. Because four separate brands share the part, always confirm the exact model name on your unit rather than relying on the brand alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09177\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do four different brands use the same lamp code?\u003c\/strong\u003e\u003cbr\u003eDukane, Hitachi, Liesegang and Sim2 each sold rebadged versions of the same underlying projector design, so the Image Pro 8030, CP-S830, CP-S830J, dv295 and SLC600 all share this identical 150 watt lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs ZU0254044010 a different lamp from DT00171?\u003c\/strong\u003e\u003cbr\u003eNo, it is an alternative code for the same 150 watt module. Some of the brands that resell this projector design use ZU0254044010 in their own documentation instead of DT00171.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wattage and rated life of DT00171?\u003c\/strong\u003e\u003cbr\u003eIt is rated at 150 watts with a working life of 2,000 hours, consistent across every Dukane, Hitachi, Liesegang and Sim2 model this lamp fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector is a Hitachi CP-S830J, does this fit?\u003c\/strong\u003e\u003cbr\u003eYes, the CP-S830J is one of the five listed models, alongside the standard CP-S830, the Dukane Image Pro 8030, Liesegang dv295 and Sim2 SLC600, so this DT00171 listing is the correct lamp for your unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the DT00171's housing part of the delivery?\u003c\/strong\u003e\u003cbr\u003eYes, this is the module version, so the 150 watt lamp arrives pre-fitted into its housing as one complete assembly ready to install, with nothing extra to source separately.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182591357164,"sku":"LA-09177","price":53.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25303-xl.png?v=1786958337"},{"product_id":"z933792630-projector-lamp","title":"Z933792630 bare projector lamp","description":"\u003cp\u003eSim2's D10 is matched to a single lamp, listed here as Z933792630. Supplied as a bare bulb, it is fitted into the housing already built into the projector, with no separate housed module version offered for this particular model at all.\u003c\/p\u003e\u003cp\u003eBecause no alternative part numbers exist for Z933792630, this code is what to check against the marking on your current bulb. As a bare lamp, only the bulb itself is exchanged during fitting, and the D10's existing housing and carrier are reused.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10283\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs there a housed module version of this lamp for the D10?\u003c\/strong\u003e\u003cbr\u003eNo, only the bare-bulb version is listed for the D10, so the existing housing inside the projector is reused whenever the lamp itself is replaced with this bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other codes I might find on my old D10 lamp?\u003c\/strong\u003e\u003cbr\u003eNo, Z933792630 is the only part number recorded for this fitting, so that is the code to compare against your existing bulb before you place an order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit this bulb into my D10?\u003c\/strong\u003e\u003cbr\u003eAccess the lamp compartment as set out in your D10 manual, remove the old bulb from its housing once the projector has cooled, and seat the new bulb in the same position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the safest way to store a spare bulb before fitting it?\u003c\/strong\u003e\u003cbr\u003eKeep it in its original packaging, upright and away from knocks, until you are ready to fit it, since the glass envelope can be damaged by rough handling even before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the D10 need its lamp-hours counter reset after this bulb is fitted?\u003c\/strong\u003e\u003cbr\u003eMost Sim2 projectors include a lamp-hours reset in the menu system, which should be run after fitting so the D10 tracks usage from zero for the new bulb.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182591619308,"sku":"LA-10283","price":123.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26819-lg.png?v=1786958816"},{"product_id":"z930100290-projector-lamp","title":"Z930100290 bare projector lamp","description":"\u003cp\u003eWhere Z930100320 covers the OSRAM version of this lamp, Z930100290 is the equivalent built to the Philips specification, fitted across twenty-one Sim2 projectors in the Domino, EV and HT ranges - from the DOMINO and EV 150 through to the HT300EVO and SDV52 U251.\u003c\/p\u003e\u003cp\u003eChecking whether your Sim2 projector originally took an OSRAM or a Philips lamp is the key step before ordering, since the two are not interchangeable despite fitting the same model names. No alternative part numbers are recorded for Z930100290, so that single code is what to match against your old bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10286\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 21 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between this lamp and Z930100320?\u003c\/strong\u003e\u003cbr\u003eBoth fit the same range of Sim2 Domino, EV and HT projectors, but Z930100320 is built to the OSRAM specification while Z930100290 is the Philips-specification equivalent. Check which type your projector originally used before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my Sim2 projector needs the Philips or OSRAM lamp?\u003c\/strong\u003e\u003cbr\u003eThe bulb originally fitted, or any code printed on it, will indicate which specification your projector uses. Matching that against Z930100290 for Philips or Z930100320 for OSRAM confirms the correct part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit every HT-series Sim2 projector?\u003c\/strong\u003e\u003cbr\u003eIt fits the Philips-equipped HT models listed here, including the HT200, HT250, HT280 and HT300 variants. OSRAM-equipped HT projectors take the separate Z930100320 listing instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFor the Philips-fit Domino models, is the Z930100290 a full assembly?\u003c\/strong\u003e\u003cbr\u003eNo, it is a bare lamp only, fitting into the housing already built into your Sim2 projector rather than including a new housing as a complete module would.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there alternative part numbers for Z930100290?\u003c\/strong\u003e\u003cbr\u003eNo, this is the only code recorded for this Philips-specification lamp, so it is what to check against the marking on your existing bulb before ordering a replacement.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182592340204,"sku":"LA-10286","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23532-lg.png?v=1786957039"},{"product_id":"z930100319-projector-lamp","title":"Z930100319 bare projector lamp","description":"\u003cp\u003eZ930100319 is a bare replacement burner for the Sim2 DOMINO D35, a home cinema projector from Sim2's Domino range. This lamp does not come with a housing, so it is intended for buyers replacing the bulb inside a working module rather than fitting a complete unit. We list it against a single projector, the DOMINO D35, with no other model sharing the code.\u003c\/p\u003e\u003cp\u003eBecause this is a bare lamp, you will need to reuse the housing and connector from your existing module rather than fit a new casing. Z930100319 is the only code we hold for this lamp, so compare it against the number on your old burner before ordering. If yours differs, it will not be a match for the DOMINO D35.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10288\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp include a housing or cage?\u003c\/strong\u003e\u003cbr\u003eNo. Z930100319 is supplied as a bare burner only, so you fit it into the housing that is already inside your Sim2 DOMINO D35. Keep the old housing and simply swap the bulb unit across, checking the connector orientation matches before you close the projector up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Z930100319 the correct code for my DOMINO D35?\u003c\/strong\u003e\u003cbr\u003eIt is the only part number we list against the Sim2 DOMINO D35. If the label inside your projector or on your old lamp shows a different code, check it carefully, since a differently numbered lamp may not seat correctly in this model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere on the DOMINO D35 do I clear the hour count after fitting the Z930100319?\u003c\/strong\u003e\u003cbr\u003eThe reset is carried out through the DOMINO D35's on-screen menu after the new burner is installed and the housing is closed. Refer to your projector's manual for the exact menu path, since this varies between firmware versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'bare lamp' mean for this listing?\u003c\/strong\u003e\u003cbr\u003eIt means Z930100319 ships as the glass and reflector burner alone, without any surrounding cage, connector board or housing shell. You reuse the housing already fitted in your DOMINO D35 rather than replacing it as a complete unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Sim2 part number?\u003c\/strong\u003e\u003cbr\u003eZ930100319 is the manufacturer part code for this lamp, so it identifies the genuine burner Sim2 specifies for the DOMINO D35, rather than a generic equivalent chosen to fit a range of projectors.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182592897260,"sku":"LA-10288","price":75.26,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26500-lg.png?v=1786958797"},{"product_id":"z930100705-projector-lamp","title":"Z930100705 bare projector lamp","description":"\u003cp\u003eZ930100705 is a bare burner that fits four projectors in Sim2's NERO series: the NERO, NERO 3D, NERO 3D-1 and NERO 3D-2. One lamp code covers the entire range, so whichever NERO variant you own, this is the correct replacement bulb to fit inside your existing housing.\u003c\/p\u003e\u003cp\u003eAs a bare lamp, Z930100705 does not include a housing, so the cage and connector from your current burner stay in the projector and only the bulb itself is replaced. There is no separate code for the individual NERO models, so ordering is straightforward provided your projector is one of the four listed here.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11299\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes one lamp really cover all four NERO models?\u003c\/strong\u003e\u003cbr\u003eYes. Sim2 uses the same burner, Z930100705, across the NERO, NERO 3D, NERO 3D-1 and NERO 3D-2, so you do not need to identify which specific variant you own beyond confirming it is one of these four models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the NERO 3D-1 and 3D-2?\u003c\/strong\u003e\u003cbr\u003eWe list them as separate projector models that share the same lamp code, Z930100705. Beyond confirming your projector is one of the NERO 3D variants, the differences between them do not affect which burner you need to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFor the NERO range, is the Z930100705 supplied caged or as the burner alone?\u003c\/strong\u003e\u003cbr\u003eAs the burner alone. This listing is a bare lamp, meaning the housing, cage and connector board from your projector are reused, so keep the old housing when you fit the new lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reset the lamp hours on a NERO projector?\u003c\/strong\u003e\u003cbr\u003eThe lamp counter reset is carried out from the on-screen menu once the new burner is fitted and the projector is closed up. Check your NERO model's manual for the exact menu path, as this can vary slightly across the range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCould a NERO's old burner legitimately carry a different code to Z930100705?\u003c\/strong\u003e\u003cbr\u003eZ930100705 is the only code we hold for this burner. If the lamp you are removing carries a different number, check it against your projector model before ordering, since a mismatch will not fit correctly.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182593847532,"sku":"LA-11299","price":155.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28162-lg.png?v=1786959055"},{"product_id":"z933797630-projector-lamp","title":"Z933797630 bare projector lamp","description":"\u003cp\u003eZ933797630 is the bare burner Sim2 specifies for both the DOMINO SIRIO and SIRIO projectors, two closely related models that share the same lamp. Fitting is inside your existing housing rather than as a complete replacement module, since no cage or connector board is included with this listing.\u003c\/p\u003e\u003cp\u003eBecause DOMINO SIRIO and SIRIO share a single lamp code, you do not need to work out which of the two you own beyond confirming your projector is one of them. This is a bare burner, so retain your current housing and swap only the bulb assembly when fitting the replacement.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11296\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the DOMINO SIRIO the same as the SIRIO for lamp purposes?\u003c\/strong\u003e\u003cbr\u003eYes. Sim2 uses the same burner, Z933797630, in both the DOMINO SIRIO and SIRIO, so the same lamp is correct for either projector without needing to distinguish further between the two model names.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the picture on the Z933797630 page the lamp I will actually receive?\u003c\/strong\u003e\u003cbr\u003eNot necessarily. No dedicated product photo exists for this lamp, so a generic image is shown instead. The part number, fitment and specification given in this listing are specific to Z933797630 and accurate regardless of the photo used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith the Z933797630, does anything replace my SIRIO's cage and connector?\u003c\/strong\u003e\u003cbr\u003eNo. This is a bare burner only. The housing, connector and cage from your existing DOMINO SIRIO or SIRIO lamp remain in the projector, and only the bulb itself is replaced when you fit this lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can a Sim2 owner be sure the Z933797630 is the correct order?\u003c\/strong\u003e\u003cbr\u003eConfirm your projector is either a DOMINO SIRIO or SIRIO, and check the code on your existing burner against Z933797630 if it is visible. This is the only part number we hold for this lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reset the lamp timer on a SIRIO projector?\u003c\/strong\u003e\u003cbr\u003eThe reset is carried out through the on-screen maintenance menu after the new burner is fitted. Consult your SIRIO or DOMINO SIRIO manual for the specific menu location, since Sim2's menu layout varies by model.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182594437356,"sku":"LA-11296","price":448.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"z933798630-projector-lamp","title":"Z933798630 bare projector lamp","description":"\u003cp\u003eZ933798630 is the bare burner for Sim2's CRYSTAL CUBE and CRYSTAL CUBE SE projectors, sold without a housing for fitting inside your existing module. The same code covers both variants of the CRYSTAL CUBE, so no further identification is needed beyond confirming your projector is one of the two.\u003c\/p\u003e\u003cp\u003eIf your CRYSTAL CUBE's housing is in good condition, this bare lamp is the cheaper route compared with a complete module, since you reuse the existing cage and connector and replace only the bulb. Check the part number against your old burner where it is visible before ordering, as Z933798630 is the only code listed here.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11295\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eShould I buy this bare lamp or the module version instead?\u003c\/strong\u003e\u003cbr\u003eChoose the bare lamp if your CRYSTAL CUBE's existing housing is undamaged, since it is the cheaper option and reuses your current cage and connector. Choose a module instead if the housing itself is cracked or worn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Z933798630 fit both the CRYSTAL CUBE and CRYSTAL CUBE SE?\u003c\/strong\u003e\u003cbr\u003eYes, the same lamp code covers both models. You do not need to check which CRYSTAL CUBE variant you own beyond confirming it is one of these two projectors before ordering this bare burner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the genuine Sim2 part number?\u003c\/strong\u003e\u003cbr\u003eZ933798630 is the manufacturer code for this burner, identifying the genuine lamp Sim2 specifies for the CRYSTAL CUBE range rather than a substitute chosen to fit a broader set of projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should my fingers go when installing the Z933798630?\u003c\/strong\u003e\u003cbr\u003eHold the lamp by its base or reflector edge rather than the glass envelope, and avoid fitting it while the projector is warm. Fingerprints on the glass can shorten a lamp's working life once powered up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow will a CRYSTAL CUBE flag that its burner is nearly spent?\u003c\/strong\u003e\u003cbr\u003eMost CRYSTAL CUBE units show a warning through the on-screen menu or an indicator light as the lamp approaches the end of its expected life. Dimming picture brightness or a shift in colour balance are also common signs.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182595322092,"sku":"LA-11295","price":178.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25545-lg.png?v=1786958350"},{"product_id":"z933791630-projector-lamp-module","title":"Z933791630 projector lamp with module","description":"\u003cp\u003eZ933791630 is a complete lamp and housing that spans a large family of Sim2 home cinema projectors: the HT5000, HT5000E, HT5000HB, M80, M80 Host, PRO5000, PRO5000E, PRO5DL, PRO5DL Host, Teatro 50 and Teatro 80. Sim2 built these eleven models on a shared lamp platform, so one part number and one module fits the entire range.\u003c\/p\u003e\u003cp\u003eThis is the module version, so the housing and connector board are included and you fit the whole assembly as one piece rather than reusing your existing cage. With eleven compatible models sharing Z933791630, double check your projector's exact name against the list here, since Sim2's HT, M80, PRO and Teatro ranges can look similar at a glance.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10296\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 11 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow can eleven different projectors share one lamp?\u003c\/strong\u003e\u003cbr\u003eSim2 built the HT5000, M80, PRO5000, PRO5DL and Teatro ranges on a common internal platform, so they use the same lamp and housing, Z933791630, despite carrying different model names and being sold under different series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the PRO5000 and PRO5DL for this lamp?\u003c\/strong\u003e\u003cbr\u003eBoth use the same lamp, Z933791630, so the difference in model name does not affect which part you order. Confirm your projector's exact badge matches one of the eleven names listed here before buying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith the Z933791630, is anything reused from my old lamp assembly?\u003c\/strong\u003e\u003cbr\u003eNo. This is the module version, so the complete housing, cage and connector board are included. You do not need to reuse your existing housing, which makes fitting more straightforward if it is worn or hard to open.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a bare lamp version of Z933791630 available too?\u003c\/strong\u003e\u003cbr\u003eYes, the same lamp code is also listed as a bare burner without the housing, for buyers who want to reuse their existing module rather than replace it complete. Both versions fit the same eleven projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector is a 'Host' model, does that change anything?\u003c\/strong\u003e\u003cbr\u003eNo. The M80 Host and PRO5DL Host use the same lamp, Z933791630, as their standard counterparts. 'Host' refers to the projector variant rather than a different lamp requirement.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182596075756,"sku":"LA-10296","price":357.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34845-xl.png?v=1786964307"},{"product_id":"z933791630-projector-lamp","title":"Z933791630 bare projector lamp","description":"\u003cp\u003eEleven Sim2 projectors, the HT5000, HT5000E, HT5000HB, M80, M80 Host, PRO5000, PRO5000E, PRO5DL, PRO5DL Host, Teatro 50 and Teatro 80, share the bare lamp Z933791630. This version ships as the burner alone, for fitting inside the housing already installed in your projector, rather than as a complete replacement module.\u003c\/p\u003e\u003cp\u003eChoosing the bare lamp over the module saves cost if your existing housing across any of these eleven models is still sound, since you reuse the cage and connector board and replace only the bulb. Check your projector's exact model name against the list, as Sim2 shares this lamp platform across several closely related series.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10295\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 11 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy choose the bare lamp instead of the complete module?\u003c\/strong\u003e\u003cbr\u003eThe bare lamp is the lower-cost option if your existing housing across any HT5000, M80, PRO or Teatro model is undamaged, since you reuse the cage and connector and replace only the burner itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Teatro 50 use the same lamp as the Teatro 80?\u003c\/strong\u003e\u003cbr\u003eYes, both share Z933791630 along with the rest of this Sim2 family, so the model number difference between the Teatro 50 and Teatro 80 does not change which bare lamp you need to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before fitting a bare lamp myself?\u003c\/strong\u003e\u003cbr\u003eConfirm the housing you are reusing is free of cracks and that the connector pins are not bent or corroded before fitting the new burner, since a damaged housing can affect how well the new lamp seats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the M80 and M80 Host the same for lamp purposes?\u003c\/strong\u003e\u003cbr\u003eYes, both use Z933791630. The 'Host' designation describes the projector variant, not a different lamp requirement, so the same bare burner is correct for either the M80 or the M80 Host.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reset the lamp counter across this Sim2 range?\u003c\/strong\u003e\u003cbr\u003eThe reset is carried out from the projector's on-screen maintenance menu once the new burner is fitted. The exact menu path is broadly similar across the HT, M80, PRO and Teatro models, but check your manual to confirm.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182597026028,"sku":"LA-10295","price":288.78,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/24873-lg.png?v=1786958289"},{"product_id":"z930100326-projector-lamp","title":"Z930100326 bare projector lamp","description":"\u003cp\u003eZ930100326 is a bare burner covering five projectors in Sim2's C3X line: the C3X, C3X LINK, C3X Lite, C3X LUMIS and the related PROC4. Sim2 uses this single lamp code across the whole family, so identifying your exact C3X variant matters less than confirming it appears in this list.\u003c\/p\u003e\u003cp\u003eThis is a bare lamp, so you keep your current housing and cage and fit only the new burner in place of the old one. With five projector names sharing one code, check yours carefully against the C3X, C3X LINK, C3X Lite, C3X LUMIS and PROC4 before ordering, since Sim2's naming across this range is easy to mix up.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10280\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the C3X Lite and C3X LUMIS for this lamp?\u003c\/strong\u003e\u003cbr\u003eBoth use the same burner, Z930100326, so the naming difference between the Lite and LUMIS variants does not change which lamp to order. Confirm your projector matches one of the five names listed here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PROC4 really use the same lamp as the C3X range?\u003c\/strong\u003e\u003cbr\u003eYes, Sim2 lists the PROC4 alongside the C3X, C3X LINK, C3X Lite and C3X LUMIS as sharing Z930100326. Despite the different model name, the PROC4 sits in the same lamp family as the C3X line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes anything besides the burner ship with the Z930100326?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare lamp, so it does not include a housing. You reuse the cage and connector already fitted in your C3X or PROC4 projector and swap only the burner itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I safely fit a bare lamp like this one?\u003c\/strong\u003e\u003cbr\u003ePower off and unplug the projector, let it cool fully, then open the housing following your model's manual. Handle the new burner by its base rather than the glass, and seat the connector firmly before closing the unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if the code on my old lamp does not match Z930100326?\u003c\/strong\u003e\u003cbr\u003eCheck the number carefully against your old burner, since Z930100326 is the only code listed here. A differently numbered lamp is unlikely to be a correct match for the C3X or PROC4 range.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182597681388,"sku":"LA-10280","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28995-lg.png?v=1786959185"},{"product_id":"z933796630-projector-lamp","title":"Z933796630 bare projector lamp","description":"\u003cp\u003eZ933796630 is a 280-watt bare burner rated for around 2000 hours of use, fitting both the Sim2 Crystal 35 and CRYSTAL 45 projectors. The same lamp code and wattage cover both models, so you do not need to distinguish between them beyond confirming your projector is one of the two.\u003c\/p\u003e\u003cp\u003eAs a bare lamp, this listing does not include a housing, so fit the new 280W burner into your existing Crystal 35 or CRYSTAL 45 cage rather than replacing the module complete. If you would prefer a complete housing instead, a module version of this same lamp code is also available.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 280 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10281\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat power and endurance figures apply to the Z933796630?\u003c\/strong\u003e\u003cbr\u003eZ933796630 is a 280-watt burner rated for around 2000 hours, and this rating applies to both the Sim2 Crystal 35 and CRYSTAL 45, since the two models share the same lamp specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Crystal 35 use a different wattage lamp than the CRYSTAL 45?\u003c\/strong\u003e\u003cbr\u003eNo, both use the same 280-watt, 2000-hour burner, Z933796630. The model name differs between the Crystal 35 and CRYSTAL 45, but the lamp specification and part number are identical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I wait until 2000 hours to know when to replace it?\u003c\/strong\u003e\u003cbr\u003eThe 2000-hour rating is a guide to expected life rather than a hard cut-off, and brightness typically fades gradually before that point. Many owners replace the lamp once picture brightness or colour noticeably drops rather than waiting for a fixed hour count.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a module version of this lamp available as well?\u003c\/strong\u003e\u003cbr\u003eYes, Z933796630 is also listed as a complete lamp and housing for buyers who would rather replace the whole assembly than reuse their existing Crystal 35 or CRYSTAL 45 housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 280W rating mean for fitting this bare lamp?\u003c\/strong\u003e\u003cbr\u003eIt confirms this burner draws 280 watts, matching what the Crystal 35 and CRYSTAL 45 are designed to run. Fitting a lamp of a different wattage into these projectors is not something we would recommend.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182598369516,"sku":"LA-10281","price":197.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27824-lg.png?v=1786958998"},{"product_id":"z933796630-projector-lamp-module","title":"Z933796630 projector lamp with module","description":"\u003cp\u003eThis listing pairs the 280-watt Z933796630 burner, rated for around 2000 hours, with a complete housing for the Sim2 Crystal 35 and CRYSTAL 45. Fitting the whole module is more involved than swapping the bulb alone but avoids reusing a housing that may be old or damaged.\u003c\/p\u003e\u003cp\u003eBoth the Crystal 35 and CRYSTAL 45 take the same module, so the two model names do not change which part to order. If your current housing is in good condition, the bare version of Z933796630 is also available and works out cheaper for a straightforward bulb swap.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 280 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10282\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat comes included with this module lamp?\u003c\/strong\u003e\u003cbr\u003eThis listing includes the full housing along with the 280-watt, 2000-hour burner Z933796630, so you fit the complete assembly into your Crystal 35 or CRYSTAL 45 rather than opening the existing housing to change the bulb alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen is it worth choosing the module over the bare lamp?\u003c\/strong\u003e\u003cbr\u003eChoose the module if your existing housing is cracked, discoloured or difficult to seat correctly, since replacing the whole assembly avoids working with a worn cage. If the housing is fine, the bare lamp version is the cheaper route.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this module fit both the Crystal 35 and CRYSTAL 45?\u003c\/strong\u003e\u003cbr\u003eYes, both projectors use the identical module and 280-watt burner, Z933796630. You do not need to identify which specific model you own beyond confirming it is one of these two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should the 2000-hour rating last in normal use?\u003c\/strong\u003e\u003cbr\u003e2000 hours is Sim2's rated figure for this burner under typical operating conditions, though actual brightness and colour performance can start to fade before the lamp reaches that count, especially with frequent use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs fitting a module different from fitting a bare bulb?\u003c\/strong\u003e\u003cbr\u003eYes, a module is removed and refitted as one sealed unit, without opening the housing yourself, which is generally simpler than handling a bare burner directly. Power off and unplug the projector before starting either job.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182599155948,"sku":"LA-10282","price":183.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27887-xl.png?v=1786959010"},{"product_id":"78-6969-8919-9-projector-lamp-module","title":"78-6969-8919-9 projector lamp with module","description":"\u003cp\u003eFifty-one projectors, nine brands, one lamp: 78-6969-8919-9 covers 3M's MP8670, MP8745, MP8755, MP8760 and MP8770, Hitachi's large CP-S860 and CP-X960 families, Boxlight's MP-650i and MP-86i, Dukane's Image Pro 8050 through 8900, Liesegang's dv240 through dv360, Polaroid's Polaview 360, Proxima's DP-6840 series, Sim2's SLC HB range and four Viewsonic models.\u003c\/p\u003e\u003cp\u003eRated at 190 watts with a 2000-hour design life, this same complete module is cross-listed under 456-206, DT00231, LAMP-017, RLU-190-03A, ZU0262044010 and its spaced form ZU0262 04 4010. With fifty-one compatible projectors, checking your exact model name against the brand lists here is the surest way to confirm you need this part.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 190 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-07782\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 51 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp fit so many different brands?\u003c\/strong\u003e\u003cbr\u003eSeveral projector makers shared the same underlying engine design, so identical hardware was sold under different names — 3M, Boxlight, Dukane, Hitachi, Liesegang, Polaroid, Proxima, Sim2 and Viewsonic all released models that use this same 78-6969-8919-9 lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is DT00231 or LAMP-017?\u003c\/strong\u003e\u003cbr\u003eThese are alternative codes for the identical lamp sold as 78-6969-8919-9, alongside 456-206, RLU-190-03A and ZU0262044010. If your old bulb carries any of these numbers, this listing is the correct match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the lamp housing?\u003c\/strong\u003e\u003cbr\u003eYes, it is a complete module with the 190-watt lamp already fitted, rated for 2000 hours. It installs as one piece without needing to transfer the bulb from an old housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I find my projector in such a long compatibility list?\u003c\/strong\u003e\u003cbr\u003eCheck your model name against the brand groupings above — 3M, Boxlight, Dukane, Hitachi, Liesegang, Polaroid, Proxima, Sim2 and Viewsonic — rather than scanning all fifty-one at once. Most projectors are grouped by close model-number ranges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat counts as an original lamp for this listing?\u003c\/strong\u003e\u003cbr\u003eIt means the lamp and housing match the specification your projector shipped with under one of the codes on this page — 78-6969-8919-9, 456-206, DT00231, LAMP-017, RLU-190-03A or ZU0262044010 — rather than a generic substitute.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182639624428,"sku":"LA-07782","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25530-xl.png?v=1786958351"},{"product_id":"sim2-domino-35h-projector-lamp","title":"Sim2 DOMINO 35H bare projector lamp","description":"\u003cp\u003eThe Sim2 DOMINO 35H uses a single bare burner that we list against the projector itself, since no manufacturer part number is published for this lamp. Buyers replacing the bulb in their DOMINO 35H should match the fitting and connector of their existing burner rather than search for a part code that does not exist for this model.\u003c\/p\u003e\u003cp\u003eBecause there is no part number to check, ordering the right lamp for a DOMINO 35H comes down to confirming the projector model on the unit itself before you buy. This is a bare burner only, so the housing from your current lamp stays in the projector and the old bulb is swapped out inside it.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10287\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWith no Sim2 code shown, how is this DOMINO 35H lamp identified?\u003c\/strong\u003e\u003cbr\u003eWe list this lamp by the projector it fits, the Sim2 DOMINO 35H, rather than by a manufacturer code. Some Sim2 lamps do not carry a published part number, so the projector model itself is the safest way to identify the correct burner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I keep my DOMINO 35H's old housing when this lamp arrives?\u003c\/strong\u003e\u003cbr\u003eYes. This is a bare lamp, so it ships as the burner alone for fitting inside the housing already installed in your DOMINO 35H. Keep the old housing and cage, and transfer only the bulb assembly across when you replace it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know this fits my projector?\u003c\/strong\u003e\u003cbr\u003eCheck the model plate on your projector or its on-screen information menu against DOMINO 35H before ordering. Since this lamp is identified by projector model rather than a part code, matching the exact model name is the key step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the lamp timer need resetting after fitting?\u003c\/strong\u003e\u003cbr\u003eMost Sim2 projectors, including the DOMINO 35H, track lamp hours and expect a reset once a new burner is fitted. The reset option is usually found in the lamp or maintenance section of the on-screen menu.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a generic photo used for this listing normal?\u003c\/strong\u003e\u003cbr\u003eYes. Some lamps in our catalogue, including this one, use a generic photo because no dedicated product image exists for the DOMINO 35H burner. The specification and fitment information given here are still accurate to this listing.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182675046636,"sku":"LA-10287","price":213.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"sim2-crystal-cube-projector-lamp-module","title":"Sim2 CRYSTAL CUBE lamp with module","description":"\u003cp\u003eThis is a complete lamp and module for the Sim2 CRYSTAL CUBE range, listed against the projector rather than a manufacturer part code, since none is published for this item. It covers the CRYSTAL CUBE, CRYSTAL CUBE SE and the Z933798630 listing, and includes the housing, so it fits as a single unit rather than a bare bulb.\u003c\/p\u003e\u003cp\u003eBecause this is a module rather than a bare lamp, you replace the whole housing assembly as one piece, which is more straightforward if your existing housing is worn, cracked or difficult to open. Confirm your projector is a CRYSTAL CUBE or CRYSTAL CUBE SE before ordering, since no part number is available to double-check against.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12255\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this module lamp?\u003c\/strong\u003e\u003cbr\u003eThis listing includes the full lamp and housing assembly, not just the bare bulb, so you fit the whole unit into your CRYSTAL CUBE or CRYSTAL CUBE SE rather than opening the old housing to swap the burner alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose the module version over a bare lamp?\u003c\/strong\u003e\u003cbr\u003eA module is worth choosing if your existing housing is damaged, or if you would rather not handle the bare burner directly. It costs more than a bare lamp but removes the need to reuse the old housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do CRYSTAL CUBE owners confirm fit when Sim2 publishes no code?\u003c\/strong\u003e\u003cbr\u003eWe list this module by the projector it fits, the Sim2 CRYSTAL CUBE and CRYSTAL CUBE SE, since no manufacturer part code is published for it. Matching the projector model is the way to confirm fitment here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit the CRYSTAL CUBE SE as well as the standard CUBE?\u003c\/strong\u003e\u003cbr\u003eYes, the same module fits both the CRYSTAL CUBE and CRYSTAL CUBE SE. Confirm your projector is one of these two models before ordering, since that is the detail this listing is matched against.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I handle the new module when fitting it?\u003c\/strong\u003e\u003cbr\u003eHandle the module by its housing edges rather than the glass, and avoid touching the bulb itself with bare skin, since oils can shorten its life. Fit it with the projector powered off and unplugged.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182675177708,"sku":"LA-12255","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/36787-xl.png?v=1786965470"}],"url":"https:\/\/www.lampsauthority.com\/collections\/sim2-projector-lamps.oembed","provider":"Lamps Authority","version":"1.0","type":"link"}