{"title":"Sharp projector lamps","description":"\u003cp\u003eReplacement projector lamps for Sharp projectors — 91 lamps catalogued. Available as bare lamps (the bulb alone, fitted into the housing already in your projector) and as complete modules (bulb and housing together, ready to drop straight in).\u003c\/p\u003e\u003cp\u003eEvery lamp carries a genuine Philips, Osram or Ushio burner, ships free worldwide, and is covered by a 180-day guarantee. If you are not sure which your projector takes, check the code on the old lamp or send us a photo of the label.\u003c\/p\u003e","products":[{"product_id":"an-k20lp-projector-lamp-module","title":"AN-K20LP projector lamp with module","description":"\u003cp\u003eAN-K20LP is a complete lamp module, bulb and housing together, built for Sharp's DT-5000 and XV-Z20000\/XV-Z21000 home cinema projectors. Because it includes the housing, it drops straight into the projector without any transfer of parts from your old unit, unlike a bare bulb replacement.\u003c\/p\u003e\u003cp\u003eAs a full module, AN-K20LP suits anyone who would rather not open up and rebuild the old housing themselves. It is listed for four Sharp models, the DT-5000, XV-Z20000, XV-Z20000U and XV-Z21000, so confirm which of these your projector's badge shows before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10217\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between this and a bare lamp?\u003c\/strong\u003e\u003cbr\u003eThis is a complete module: bulb and housing together. You remove the old module as one unit and fit this one in its place, without handling loose bulbs or transferring brackets between housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sharp projectors take the AN-K20LP?\u003c\/strong\u003e\u003cbr\u003eIt fits the DT-5000, XV-Z20000, XV-Z20000U and XV-Z21000. These models share the same lamp door and mounting, which is why one module code covers all four.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat equipment is needed to swap in the AN-K20LP?\u003c\/strong\u003e\u003cbr\u003eMost Sharp projectors in this range use a lamp door secured by one or two captive screws, opened with a standard screwdriver. No specialist tools are needed to swap the module itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs AN-K20LP the only code for this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, we list a single part code, AN-K20LP, for this module. If a listing elsewhere shows a different reference for your XV-Z20000 or XV-Z21000, check it against this code before buying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'original' mean for this listing?\u003c\/strong\u003e\u003cbr\u003eIt means the module is built to the same specification as the lamp originally fitted by Sharp to these projectors, covering bulb type, wattage and housing fit, rather than a generic universal replacement.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182565175532,"sku":"LA-10217","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/21380-xl.png?v=1786956913"},{"product_id":"ah-66271-projector-lamp","title":"AH-66271 bare projector lamp","description":"\u003cp\u003eTwenty projectors across Eiki and Sharp share this 275-watt bulb, including the Eiki EIP-3000N and EIP-3000NA and the Sharp XG-MB65 and XR-2280 series. AH-66271 is the bare version, rated for 2000 hours, and is also sold as AN-XR20LP when packaged with its housing as a complete module.\u003c\/p\u003e\u003cp\u003eBecause the Sharp XR-20 and XG-MB ranges include several closely related suffixes such as S, X and A, take the code from your old bulb rather than the projector model alone. If your housing is cracked or the locating pins are worn, the AN-XR20LP module version replaces the whole assembly instead of just the bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08904\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 20 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between AH-66271 and AN-XR20LP?\u003c\/strong\u003e\u003cbr\u003eThey are the same 275-watt, 2000-hour lamp. AH-66271 is the bare bulb for reuse in an existing housing, while AN-XR20LP is the same lamp packaged with a new housing as a complete module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes AH-66271 fit all Sharp XG-MB projectors?\u003c\/strong\u003e\u003cbr\u003eIt fits the XG-MB55, XG-MB55X, XG-MB65, XG-MB65X, XG-MB67 and XG-MB67X models specifically. Sharp used closely related model numbers across this range, so confirm your exact suffix before ordering rather than assuming by the XG-MB prefix alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I choose between the bare lamp and the module?\u003c\/strong\u003e\u003cbr\u003eChoose the bare lamp if your projector's existing housing, cage and connector pins are undamaged, since you are only replacing the bulb. Choose the module if the housing is cracked, warped, or the electrical contacts look worn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Eiki models take the AH-66271 lamp?\u003c\/strong\u003e\u003cbr\u003eThe EIP-2500, EIP-2500A, EIP-3000N, EIP-3000NA and EIP-X3000N all use this lamp. If your Eiki projector carries a different model number, check the code on your existing bulb before ordering, as the wider EIP range uses several different lamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 2000 hours a guaranteed lifespan for this bulb?\u003c\/strong\u003e\u003cbr\u003eNo, 2000 hours is the manufacturer's rated life under standard conditions, not a guarantee. Heat, dust build-up inside the projector and frequent power cycling can all shorten actual bulb life below the rated figure.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182566060268,"sku":"LA-08904","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"an-z200lp-projector-lamp-module","title":"AN-Z200LP projector lamp with module","description":"\u003cp\u003eThis is the AN-Z200LP lamp module, also referenced as BQC-XVZ200++1, built for Sharp's DT-300, XV-Z200 and XV-Z201 projectors, including the E-suffix export variants. Bulb and housing come as one assembled unit, ready to fit in place of the depleted module without any rebuilding.\u003c\/p\u003e\u003cp\u003eIf your projector's own documentation lists BQC-XVZ200++1 rather than AN-Z200LP, both refer to the same module, so either code will get you the correct part. Fitting is a straight swap: release the old module, insert this one, and close the lamp door.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10215\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 6 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs BQC-XVZ200++1 the same lamp as AN-Z200LP?\u003c\/strong\u003e\u003cbr\u003eYes. These are two references for the same module. Some Sharp documentation and older listings use the BQC code, while AN-Z200LP is the more commonly used current reference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBeyond the DT-300, what other Sharp models take the AN-Z200LP?\u003c\/strong\u003e\u003cbr\u003eIt covers the Sharp DT-300, XV-DT300, XV-Z200, XV-Z200E, XV-Z201 and XV-Z201E. The E-suffix models are export versions of the same projector body and use the identical lamp module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOnce the AN-Z200LP is installed, should the hour count be cleared?\u003c\/strong\u003e\u003cbr\u003eYes. Many Sharp projectors from this era prompt a lamp-hour reset from the on-screen menu once a new module is detected or fitted. Check your XV-Z200 or XV-Z201 manual for the exact steps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AN-Z200LP's cage supplied as part of the unit?\u003c\/strong\u003e\u003cbr\u003eYes, this is a complete module rather than a bare bulb. Housing and lamp are supplied together as one unit, so there is nothing to transfer from your old module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm I have the right projector model?\u003c\/strong\u003e\u003cbr\u003eCheck the model badge on the front or base of your projector against DT-300, XV-Z200, XV-Z200E, XV-Z201 or XV-Z201E. The Z200 and Z201 look alike but are listed separately, so match the exact designation.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182565994732,"sku":"LA-10215","price":229.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25433-xl.png?v=1786958337"},{"product_id":"an-k20lp-projector-lamp","title":"AN-K20LP bare projector lamp","description":"\u003cp\u003eThis bare version of the AN-K20LP supplies just the bulb, for anyone who already has a working housing from the DT-5000, XV-Z20000, XV-Z20000U or XV-Z21000 and only needs a fresh lamp inside it. You transfer the burner across, rather than fitting a complete new module.\u003c\/p\u003e\u003cp\u003eChoose this over the module version if your existing housing and reflector are still in good condition, it costs less because you are not paying for housing parts you already have. Take care when transferring the bulb, and make sure the reflector alignment matches the original before closing the lamp door.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10216\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy choose the bare lamp instead of the module version?\u003c\/strong\u003e\u003cbr\u003eIf your projector's existing housing is undamaged, a bare lamp lets you reuse it and avoid paying for a new housing and reflector. It suits owners comfortable opening the old module to swap the bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I fit this bulb into any housing?\u003c\/strong\u003e\u003cbr\u003eNo, it should only go into a housing originally designed for the AN-K20LP, from a DT-5000, XV-Z20000, XV-Z20000U or XV-Z21000. Fitting it into a different housing risks a poor seal or incorrect reflector alignment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before handling the bare bulb?\u003c\/strong\u003e\u003cbr\u003eAvoid touching the glass envelope with bare fingers, since skin oils can cause uneven heating and premature failure once the lamp is running. Hold it by the base or use a clean cloth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same lamp as the AN-K20LP module?\u003c\/strong\u003e\u003cbr\u003eYes, the bulb itself is identical. The difference is that this version omits the housing, so it costs less but requires you to transfer your existing housing across.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sharp projectors is this bare lamp listed for?\u003c\/strong\u003e\u003cbr\u003eYes, the bulb itself is identical to the module version. The difference is that this version omits the housing, so it costs less but requires you to transfer your existing housing across during fitting.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182566682860,"sku":"LA-10216","price":201.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27490-lg.png?v=1786959003"},{"product_id":"an-a10lp-projector-lamp-module","title":"AN-A10LP projector lamp with module","description":"\u003cp\u003eSaville AV rebadged certain Sharp projectors, and the AN-A10LP module reflects that: it fits the Saville AV SS-1500 and SSX-1300 alongside the Sharp PG-A10S, PG-A10S-SL, PG-A10X and PG-A10X-SL. Whichever badge is on your projector, the lamp module underneath is the same part.\u003c\/p\u003e\u003cp\u003eYou may see this lamp listed under AV AN-A10LP or AV BQC-PGA10X_1 on Saville AV documentation, and as BQC-PGA10X_1 on some Sharp paperwork. All four references point to the same AN-A10LP module, so match whichever code your projector's manual gives you against this listing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10995\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 6 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does a Saville AV projector use a Sharp lamp code?\u003c\/strong\u003e\u003cbr\u003eSaville AV sold rebadged versions of certain Sharp projector models. The SS-1500 and SSX-1300 share their internal lamp assembly with the Sharp PG-A10 series, so the same module part fits both brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eI have a code like BQC-PGA10X_1 on my old lamp, is that this product?\u003c\/strong\u003e\u003cbr\u003eYes. BQC-PGA10X_1 and AV BQC-PGA10X_1 are alternative references for the same AN-A10LP module, used on different documentation for the Sharp and Saville AV versions of this projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AN-A10LP include the housing?\u003c\/strong\u003e\u003cbr\u003eYes, this is a full module with bulb and housing supplied together, so it fits in place of your old module without transferring parts between housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Saville AV projectors take this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, this is a full module with bulb and housing supplied together as one unit, so it fits in place of your old module without transferring parts between housings yourself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit a lamp module into a PG-A10X?\u003c\/strong\u003e\u003cbr\u003eOpen the lamp door on the underside or side of the projector, usually secured by a captive screw, slide out the old module, and insert the replacement, seating it fully before closing the door and screw.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182567272684,"sku":"LA-10995","price":146.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27350-xl.png?v=1786958945"},{"product_id":"an-a20lp-projector-lamp-module","title":"AN-A20LP projector lamp with module","description":"\u003cp\u003eAN-A20LP is a complete lamp module for the Sharp PG-A20X, listed under the reference BQC-PGA20X_1 as well. Bulb and housing arrive assembled as a single unit, so fitting it is a matter of swapping the whole module rather than handling a loose bulb.\u003c\/p\u003e\u003cp\u003eOlder listings and some Sharp documentation use BQC-PGA20X or BQC-PGA20X\/\/1 instead of AN-A20LP; all three describe the exact same module. If your projector's service label shows one of these older codes, this remains the correct replacement to order for it.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10996\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAre BQC-PGA20X and AN-A20LP the same lamp?\u003c\/strong\u003e\u003cbr\u003eYes. BQC-PGA20X, BQC-PGA20X\/\/1 and AN-A20LP all reference the same module for the Sharp PG-A20X. The AN-code is the more current reference we use for ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this come as a bare bulb or a full module?\u003c\/strong\u003e\u003cbr\u003eThis is the full module, with the bulb pre-fitted into its housing. You remove the old module as a complete unit and fit this one in its place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AN-A20LP suitable for any Sharp projector, or just the PG-A20X?\u003c\/strong\u003e\u003cbr\u003eThis module is listed specifically for the PG-A20X. Fitting it into a different Sharp model, even a similar-looking one, is not something we can confirm will work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know when to replace the lamp in my PG-A20X?\u003c\/strong\u003e\u003cbr\u003eWatch for dimming picture brightness, a shift in colour balance, or an on-screen lamp warning. Most Sharp projectors also display a lamp-hour count in the menu system to help judge when a change is due.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it mean when a listing says 'original' lamp?\u003c\/strong\u003e\u003cbr\u003eIt means the module matches the specification Sharp built into the PG-A20X originally, same bulb type, wattage and housing fit, rather than being a generic universal part adapted to fit.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182567928044,"sku":"LA-10996","price":130.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27564-xl.png?v=1786959013"},{"product_id":"clmpf0056ce01-projector-lamp","title":"CLMPF0056CE01 bare projector lamp","description":"\u003cp\u003eCLMPF0056CE01 is a bare bulb shared across twelve Sharp projectors, spanning the NV21 range: XG-NV21SA, XG-NV21SB, XG-NV21SE, XG-NV21SM, XG-NV21XA and XG-NV2SB, plus the NV6 range and the XV-DW100U. Supplied without a housing, it is fitted by transferring your existing housing onto the new bulb.\u003c\/p\u003e\u003cp\u003eWith so many closely named NV21 variants sharing this one bulb code, check your projector's exact suffix, SA, SB, SE, SM or XA, before ordering, since Sharp used these to distinguish otherwise similar models. As a bare lamp, CLMPF0056CE01 needs your original housing reused around it.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10254\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 12 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do so many different NV21 models share one lamp code?\u003c\/strong\u003e\u003cbr\u003eSharp built the NV21SA, NV21SB, NV21SE, NV21SM and NV21XA on the same lamp platform, varying other features between them. That shared platform is why one bulb code, CLMPF0056CE01, covers all of them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the NV6 range really use the same lamp as the NV21 range?\u003c\/strong\u003e\u003cbr\u003eYes, the XG-NV6, XG-NV6XA, XG-NV6XE and XG-NV6XU are listed against the same CLMPF0056CE01 bulb as the NV21 models, reflecting a shared lamp design across both ranges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill I need to reuse my old housing with the CLMPF0056CE01?\u003c\/strong\u003e\u003cbr\u003eYes. CLMPF0056CE01 is a bare bulb only, so you need to transfer the housing from your old lamp, or use one already fitted in your projector, before installing this bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I avoid doing when handling this bulb?\u003c\/strong\u003e\u003cbr\u003eAvoid touching the glass envelope directly with your fingers. Oils from skin can cause hot spots on the glass once the lamp is powered, shortening its working life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I find my exact NV21 suffix?\u003c\/strong\u003e\u003cbr\u003eCheck the model label on the underside or rear of the projector, which will show the full designation such as XG-NV21SE or XG-NV21XA rather than just NV21.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182568943852,"sku":"LA-10254","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/31602-lg.png?v=1786959315"},{"product_id":"ah-45002-projector-lamp-module","title":"AH-45002 projector lamp module","description":"\u003cp\u003eSome large-venue projectors run two lamps side by side for extra brightness, and AH-45002 is the module fitted on the right of that pair. It replaces the lamp in the Sharp XG-PH50X, AN-PH50L2, Eiki EIP-4500 and EIP-4500L, and the Boxlight PRO4500DP, wherever those models are marked as the right-hand unit.\u003c\/p\u003e\u003cp\u003eThis lamp is also listed as AN-PH50LP2, so check both codes against your old part before ordering. It comes as a complete module with housing, ready to slot straight into the lamp bay, and because these projectors take a matching pair, make sure you order AH-45001 for the left-hand side separately if that lamp also needs replacing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08537\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need the right or left lamp module?\u003c\/strong\u003e\u003cbr\u003eDual-lamp projectors mark each bay, often stamped left or right near the lamp door, and the models in this listing, like the Sharp XG-PH50X (Right), confirm which side AH-45002 belongs on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs AH-45002 the same lamp as AH-45001?\u003c\/strong\u003e\u003cbr\u003eNo, they are the matched pair for the same projectors: AH-45002 fits the right-hand bay and AH-45001 fits the left, so check your old lamp's position before ordering a replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't a wattage or lamp life listed for this part?\u003c\/strong\u003e\u003cbr\u003eThat figure has not been published for AH-45002, so we have left it out rather than guess; everything else about fit and compatibility above is confirmed from the projector manufacturers' own listings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes AN-PH50LP2 fit the same projectors as AH-45002?\u003c\/strong\u003e\u003cbr\u003eYes, AN-PH50LP2 is an alternative code for this same lamp module, so if that number appears on your old part or your projector's manual, AH-45002 is the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I fit a lamp module like this without help?\u003c\/strong\u003e\u003cbr\u003eModule lamps like AH-45002 are designed to be handled by anyone comfortable opening a lamp door and swapping a cartridge, though you should always let the projector cool down first.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182569533676,"sku":"LA-08537","price":70.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/24022-xl.png?v=1786957433"},{"product_id":"bqc-pgc40xu-1-projector-lamp","title":"BQC-PGC40XU-1 bare projector lamp","description":"\u003cp\u003eBQC-PGC40XU-1 is the bare bulb for Sharp's PG-C40XU projector, sold without a housing or cage of its own. It replaces just the lamp itself, so the housing you already have fitted around your current bulb needs to be reused for this replacement.\u003c\/p\u003e\u003cp\u003eThis part number is specific to the PG-C40XU, so it is worth checking that your projector's model plate reads exactly that designation before ordering. Once fitted into your existing housing, reinsert the whole assembly the same way the old lamp originally came out.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10224\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs BQC-PGC40XU-1 a bare bulb or a complete module?\u003c\/strong\u003e\u003cbr\u003eIt is a bare bulb only. The housing stays with your projector, and you transfer it from the old lamp onto this replacement bulb yourself before refitting it back inside the case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes BQC-PGC40XU-1 fit any other Sharp models?\u003c\/strong\u003e\u003cbr\u003eThis part is listed specifically for the PG-C40XU. We don't list it against any other Sharp projector, so treat it as a single-model match rather than a broadly shared code.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there alternative codes for this same lamp?\u003c\/strong\u003e\u003cbr\u003eWe hold one reference for this lamp, BQC-PGC40XU-1. If your PG-C40XU's documentation shows a different code, compare it against this one before ordering to avoid buying the wrong part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn what sense is the BQC-PGC40XU-1 an original part?\u003c\/strong\u003e\u003cbr\u003eIt means BQC-PGC40XU-1 is built to the same bulb type, wattage and base fitting as the lamp Sharp originally specified for the PG-C40XU, rather than a generic substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I safely dispose of the old lamp?\u003c\/strong\u003e\u003cbr\u003eProjector lamps contain pressurised glass and, in some cases, mercury vapour, so they should go to a household hazardous waste or electronics recycling point rather than general rubbish.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182569926892,"sku":"LA-10224","price":201.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"ah-45001-projector-lamp","title":"AH-45001 bare projector lamp","description":"\u003cp\u003eAH-45001 is the left-hand lamp in a matched pair used by dual-lamp projectors from Sharp, Eiki and Boxlight, running at 250 watts for 2,000 hours. It fits the Sharp XG-PH50, XG-PH50NL and XG-PH50X, the Eiki EIP-4500 and EIP-4500L, and the Boxlight PRO4500DP and ProColour 4500DP, wherever marked as the left unit.\u003c\/p\u003e\u003cp\u003eThe same bulb is also sold as AN-PH50LP1 and PRO4500-930, so match any of these three codes against the label on your existing lamp. This is a bare lamp only, made to go back inside the housing your projector already has, and it is the left partner to the AH-45002 module used on the opposite side.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 250 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08534\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between AH-45001 and AH-45002?\u003c\/strong\u003e\u003cbr\u003eThey are the left and right lamps of the same dual-lamp system: AH-45001 sits on the left in projectors such as the Sharp XG-PH50X (left) and the Boxlight PRO4500DP (LEFT), while AH-45002 takes the right bay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are there three different part numbers for one lamp?\u003c\/strong\u003e\u003cbr\u003eAH-45001, AN-PH50LP1 and PRO4500-930 are all codes used for this identical bare lamp across the Sharp, Eiki and Boxlight ranges, so any of the three confirms you have found the right part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bare lamp come with its own housing?\u003c\/strong\u003e\u003cbr\u003eNo, AH-45001 is the bulb only. It fits back into the housing already inside your Sharp, Eiki or Boxlight projector's left lamp bay rather than replacing that housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm my projector uses the left lamp position?\u003c\/strong\u003e\u003cbr\u003eCheck the labelling inside the lamp compartment or your projector's manual for a left or right marking; models in this listing, including the Eiki EIP-4500L (LEFT), show this clearly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn a dual-lamp EIP-4500, how does a failing AH-45001 show itself?\u003c\/strong\u003e\u003cbr\u003eThrough a noticeably dimmer picture, one side of the dual-lamp image looking uneven, or the projector reporting a lamp fault, all reasons to check whether the 2,000-hour rating has been reached.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182570189036,"sku":"LA-08534","price":190.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32112-lg.png?v=1786959684"},{"product_id":"bqc-xgc50x-1-projector-lamp","title":"BQC-XGC50X_1 bare projector lamp","description":"\u003cp\u003eBQC-XGC50X_1 is a 250-watt bare lamp rated at 2,000 hours, fitting nine Sharp projectors across the PG-C45 and PG-C50 range as well as the XG-C50 and XG-510K models. It is sold as bulb only, for fitting into the housing already in your projector.\u003c\/p\u003e\u003cp\u003eSome Sharp documentation lists this same lamp as RLMPFA003WJZZ rather than BQC-XGC50X_1, both codes describe the identical bulb. Match either reference against your projector's own paperwork, then fit the bulb into your existing housing rather than expecting a new one.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 250 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10225\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 9 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs RLMPFA003WJZZ the same lamp as BQC-XGC50X_1?\u003c\/strong\u003e\u003cbr\u003eYes, these are alternative references for the same 250-watt bulb. Different Sharp documentation and past listings have used either code, but both point to this product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the electrical and lifespan specs of the BQC-XGC50X_1?\u003c\/strong\u003e\u003cbr\u003eBQC-XGC50X_1 is rated at 250 watts with a 2,000-hour lamp life. These figures describe the bulb itself, independent of which of the nine listed projector models it ends up fitted to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sharp projectors take this lamp?\u003c\/strong\u003e\u003cbr\u003eThe PG-C45S, PG-C45X, PG-C45XU, PG-C50X and PG-C50XU, plus the XG-510K, XG-C50S, XG-C50X and XG-C50XU. All nine of these Sharp projectors share the same 250-watt bulb specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to fit this into a housing myself?\u003c\/strong\u003e\u003cbr\u003eYes, this is a bare lamp, so you transfer your existing housing from the old bulb onto this new one before it goes back into the projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I tell it's time to replace the lamp in a PG-C50X?\u003c\/strong\u003e\u003cbr\u003eLook for reduced brightness, colour drift toward one tone, or an on-screen lamp alert. Sharp projectors in this range usually show accumulated lamp hours in the menu system as well.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182570647788,"sku":"LA-10225","price":201.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32147-lg.png?v=1786959683"},{"product_id":"an-c430lp-projector-lamp-module","title":"AN-C430LP projector lamp with module","description":"\u003cp\u003eAN-C430LP is a 275-watt lamp module rated at 2,000 hours, built as a complete bulb-and-housing unit for Sharp's XG-C series. It spans nineteen models, from the XG-C330 and PG-C355W through to the XG-C455W and XG-C465XA-C, making it one of the broader shared modules in Sharp's mid-size classroom range.\u003c\/p\u003e\u003cp\u003eSome Sharp documentation lists this module under the longer reference AN+E6167:E6168-C430LP, or with a \/1 suffix as AN-C430LP\/1; all three describe the identical part. With nineteen closely related XG-C models sharing this code, check your projector's exact suffix before ordering, since the range spans several screen sizes and lamp door styles.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10223\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 19 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp module cover so many Sharp XG-C projectors?\u003c\/strong\u003e\u003cbr\u003eSharp built the XG-C330 through XG-C465 range around a common lamp platform, varying brightness, resolution and other features between models. That shared platform is why AN-C430LP fits all nineteen listed projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do the alternative codes AN+E6167:E6168-C430LP and AN-C430LP\/1 mean?\u003c\/strong\u003e\u003cbr\u003eThey are different references for the same AN-C430LP module, used across different Sharp documentation and past listings. Any of the three codes should lead you to this same product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wattage and rated lamp life?\u003c\/strong\u003e\u003cbr\u003eAN-C430LP runs at 275 watts and is rated for 2,000 hours. These figures describe the lamp itself, and apply the same way across all nineteen compatible projector models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this module include the housing, or just the bulb?\u003c\/strong\u003e\u003cbr\u003eIt is a complete module, bulb and housing assembled together, so you remove the depleted module as a single unit and fit this one in its place without any part transfer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy XG-C model has an -L suffix, is this still the right lamp?\u003c\/strong\u003e\u003cbr\u003eYes, the -L suffix variants such as XG-C435X-L and XG-465XA-C are included in the compatibility list for AN-C430LP, alongside their standard, non-suffixed counterparts in the same range.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182571303148,"sku":"LA-10223","price":178.26,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34464-xl.png?v=1786962732"},{"product_id":"an-ph7lp2-projector-lamp-module","title":"AN-PH7LP2 projector lamp with module","description":"\u003cp\u003eAN-PH7LP2 is a lamp module for the right-hand lamp position on Sharp's XG-PH70X, XG-PH70X-N, XG-PH800X and XG-PH900X projectors, which run two lamps side by side for higher brightness. Bulb and housing are supplied as one assembled unit, matched to the right-side mounting of these models.\u003c\/p\u003e\u003cp\u003eBecause these projectors use two lamps, check whether your unit needs the left or right module before ordering; AN-PH7LP2 is the right-side part specifically. Twin-lamp systems can often keep running on one lamp temporarily, but picture brightness will drop until both are replaced.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10269\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy is this lamp labelled 'Right' when the projector has two lamps?\u003c\/strong\u003e\u003cbr\u003eThe XG-PH70X and related models run two lamps side by side to increase brightness. AN-PH7LP2 is built for the right-hand lamp position, so check which side needs replacing before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIf only the right lamp has failed, must the left one be changed too?\u003c\/strong\u003e\u003cbr\u003eNot necessarily; many twin-lamp Sharp projectors can run on a single working lamp. However, replacing both together tends to keep brightness and colour more even across the image.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sharp projectors use the AN-PH7LP2?\u003c\/strong\u003e\u003cbr\u003eThe XG-PH70X, XG-PH70X-N, XG-PH800X and XG-PH900X, all of which share the same twin-lamp housing design and use this module for the right-hand lamp position specifically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a separate left-side module?\u003c\/strong\u003e\u003cbr\u003eThis listing covers the right-side AN-PH7LP2 module only. If your projector needs the left lamp replaced, search for the left-position module for the same projector family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this module be fitted without professional help?\u003c\/strong\u003e\u003cbr\u003eYes, most owners can swap AN-PH7LP2 themselves. Power down and unplug the projector, let it cool, release the lamp bay for the right-hand position, and fit the replacement module until it locks in place.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182573072620,"sku":"LA-10269","price":172.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27232-xl.png?v=1786958944"},{"product_id":"an-lx30lp-projector-lamp-module","title":"AN-LX30LP projector lamp with module","description":"\u003cp\u003eAN-LX30LP is a complete lamp module covering five Sharp projectors: the PG-LW3000, PG-LW3500, PG-LX3000, PG-LX3500 and XG-SB30XA. The LW and LX naming reflects widescreen and standard aspect models built on the same lamp platform, which is why one module code serves the whole range.\u003c\/p\u003e\u003cp\u003eFitting AN-LX30LP is a case of releasing the old module from its bay and inserting this one, without needing to open or rebuild the housing yourself. Confirm whether your projector reads LW3000, LW3500, LX3000, LX3500 or SB30XA on its badge before ordering, since these are separate listings for the same lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10241\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between the LW and LX models in this range?\u003c\/strong\u003e\u003cbr\u003eThe LW models are widescreen variants and the LX models are standard aspect ratio, but both share the same AN-LX30LP lamp module, so the distinction doesn't affect which lamp you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the XG-SB30XA appear alongside the PG-LW\/LX models?\u003c\/strong\u003e\u003cbr\u003eThe XG-SB30XA shares its internal lamp assembly with the PG-LW3000 and PG-LX3000 series, despite the different model naming, which is why it uses the same AN-LX30LP module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a bare-bulb-only version of this lamp?\u003c\/strong\u003e\u003cbr\u003eThis listing is for the complete module. If a bare version exists for your specific model, it will be listed separately, so search by your exact projector name to check.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit the AN-LX30LP module?\u003c\/strong\u003e\u003cbr\u003ePower down and unplug the projector, let it cool, then release the lamp door, usually secured by a captive screw, remove the old module and insert this one until it locks into place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes AN-LX30LP include the housing and reflector?\u003c\/strong\u003e\u003cbr\u003eYes, it is a complete module with bulb, housing and reflector supplied together as one assembled unit, ready to fit without transferring parts from your old lamp.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182573727980,"sku":"LA-10241","price":142.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25273-xl.png?v=1786958342"},{"product_id":"an-xr1lp-projector-lamp-module","title":"AN-XR1LP projector lamp with module","description":"\u003cp\u003eBuilt as a complete module, AN-XR1LP fits Sharp's XR-series portable projectors across eleven listed models, from the XR-1S and XR-1X through to the XR-N13S and XR-N13X. The S and X suffixes across this range denote SVGA and XGA resolution variants that share the identical lamp module.\u003c\/p\u003e\u003cp\u003eWith eleven closely numbered XR-N models sharing this one module, check your projector's full designation, including the S or X suffix, before ordering. Fitting AN-XR1LP is a straightforward swap: release the old module from its bay and insert this one in its place.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11912\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 11 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat do the S and X suffixes mean across the XR-N range?\u003c\/strong\u003e\u003cbr\u003eThey denote SVGA and XGA resolution versions of the same projector body. Both use the identical AN-XR1LP lamp module, so the resolution suffix doesn't change which lamp you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many Sharp projectors use the AN-XR1LP?\u003c\/strong\u003e\u003cbr\u003eEleven models across the XR-1, XR-2 and XR-N10 to XR-N13 ranges. Because the numbering is close, check your projector's full model name carefully before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes AN-XR1LP arrive assembled with a housing?\u003c\/strong\u003e\u003cbr\u003eYes, this is a complete module with bulb and housing supplied together, so you fit the whole unit in place of the old one rather than handling a loose bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIf I want just the bulb rather than the AN-XR1LP module, is that possible here?\u003c\/strong\u003e\u003cbr\u003eThis listing covers the complete module. If a bare-bulb equivalent exists, it would be listed separately under its own product page, so search specifically if that is what you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm which XR model my projector is?\u003c\/strong\u003e\u003cbr\u003eCheck the model badge on the front or top panel of the projector; it will show the full designation, such as XR-N11X or XR-N12S, rather than just 'XR'.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182575825132,"sku":"LA-11912","price":403.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/37504-xl.png?v=1786965797"},{"product_id":"an-z90lp-projector-lamp","title":"AN-Z90LP bare projector lamp","description":"\u003cp\u003eThe AN-Z90LP is a bare bulb made for Sharp's DT-200, DT0200, XV-Z90 and XV-Z91 series, covering eight projector references in total including the XV-Z90E, XV-Z90U, XV-Z91E and XV-Z91U. Sharp also lists this same lamp under BQC-XVZ90++1. Buying it bare means you fit the new bulb into the housing already inside your projector.\u003c\/p\u003e\u003cp\u003eBecause this is a bare lamp, you will need to open your existing housing and transfer the bulb yourself rather than swapping in a sealed module. Check the part code on your old bulb against AN-Z90LP or BQC-XVZ90++1 before ordering, since either code points to the same lamp. Handle the glass by its base, not the bulb itself, to avoid leaving oils on the surface.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12980\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between AN-Z90LP and BQC-XVZ90++1?\u003c\/strong\u003e\u003cbr\u003eNothing functional — Sharp used both codes for the same lamp, and some parts lists show BQC-XVZ90++1 instead. Either code will fit the same eight projectors listed for this product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a screwdriver to fit this into my Sharp XV-Z90?\u003c\/strong\u003e\u003cbr\u003eYes, since this is a bare bulb you will need to remove your projector's existing housing, take out the old lamp and fit this one inside it, then refit the housing before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this lamp fit a Sharp DT0200 as well as a DT-200?\u003c\/strong\u003e\u003cbr\u003eYes, DT-200 and DT0200 are the same model referenced two different ways in Sharp's own documentation, and both take this lamp, along with the six XV-Z90 and XV-Z91 variants also listed for this bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIf the AN-Z90LP photo is generic, what should I trust instead?\u003c\/strong\u003e\u003cbr\u003eThe codes. No individual photo of this specific bulb has been taken yet, so a generic placeholder is shown; confirm fit using the AN-Z90LP or BQC-XVZ90++1 references rather than the image.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I keep using my old housing with this replacement bulb?\u003c\/strong\u003e\u003cbr\u003eYes, that is the point of a bare lamp — your existing housing stays in the projector and only the bulb inside it is replaced.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182577004780,"sku":"LA-12980","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"bqcpgm20x-1-projector-lamp","title":"BQCPGM20X\/1 bare projector lamp","description":"\u003cp\u003eSharp's PG-M20 and PG-M25 ranges, along with the XG-P20 series, all share this same bare lamp, sold here under the code BQCPGM20X\/1. It covers eleven projector references in total, from the PG-M20S to the XG-P20XU. The same lamp also appears in parts catalogues as AN-M20LP and RLMPF0072CEZZ, among other codes.\u003c\/p\u003e\u003cp\u003eWith nine alternative part numbers recorded for this lamp, it is worth checking your old bulb's printed code against the full list — AN-M20LP, BQC-PGC30XE\/1 and RLMPF0072CEZZ are the same product as BQCPGM20X\/1. Because this is sold bare, you reuse your current housing and fit only the bulb, so confirm the housing is undamaged before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12986\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 11 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs RLMPF0072CEZZ the same lamp as BQCPGM20X\/1?\u003c\/strong\u003e\u003cbr\u003eYes, RLMPF0072CEZZ is one of nine alternative codes recorded for this exact bulb, alongside AN-M20LP and BQC-PGC30XE\/1. Any of these codes on your old lamp confirms this is the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit the Sharp XG-P20XD?\u003c\/strong\u003e\u003cbr\u003eYes, the XG-P20XD is one of eleven Sharp projectors that use this lamp, alongside the PG-M20, PG-M25 and other XG-P20 variants. Check the code on your existing bulb against BQCPGM20X\/1 or one of its nine alternative references if you are unsure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are there so many part codes for one lamp?\u003c\/strong\u003e\u003cbr\u003eSharp reused this bulb across several projector generations and sold it through different regional catalogues, each assigning its own code. We list every code we have found so you can match against whichever one is printed on your old lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith the BQCPGM20X\/1, does the PG-M20's existing housing carry on in service?\u003c\/strong\u003e\u003cbr\u003eYes. This is a bare bulb only, without a housing; your projector's existing housing stays in place and you fit this bulb into it. Make sure that housing is free of cracks or a damaged socket first, since a bare lamp will not fix a housing fault.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat inspection should come before fitting the new PG-M20X bulb?\u003c\/strong\u003e\u003cbr\u003eInspect your existing housing for cracks or a damaged socket, since a bare bulb relies on that housing being in good condition. If the housing itself is damaged, a bare lamp will not resolve the fault.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182577758444,"sku":"LA-12986","price":146.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/37969-lg.png?v=1786965841"},{"product_id":"ah-15001-projector-lamp-module","title":"AH-15001 projector lamp module","description":"\u003cp\u003eTen projectors split across Eiki and Sharp all take AH-15001: the Eiki EIP-200 on one side, and Sharp's XG-MB50X together with the XR-105, XR-10S, XR-10X, XR-11XC, XR-12SA and XR-2030X on the other. It runs at 275W and is rated for 2000 hours.\u003c\/p\u003e\u003cp\u003eThis lamp also carries the code AN-XR10LP, Sharp's own reference, and is listed under Ushio's order code 5001648, the manufacturer that supplies the bulb itself. All of these describe the same AH-15001 module, so any of the three markings on your old lamp confirms this is the correct replacement.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08900\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs AN-XR10LP a different lamp from AH-15001?\u003c\/strong\u003e\u003cbr\u003eNo, AN-XR10LP is Sharp's own code for this identical module. If your old lamp carries that marking rather than AH-15001, this listing is still the correct part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Ushio order code 5001648 refer to?\u003c\/strong\u003e\u003cbr\u003eUshio manufactures the bulb used in this module, and 5001648 is their internal reference for it. It appears on both the Eiki EIP-200 and Sharp listings because they share the same underlying lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo all seven Sharp XR models listed take the identical lamp?\u003c\/strong\u003e\u003cbr\u003eYes, the XG-MB50X, XR-105, XR-10S, XR-10X, XR-11XC, XR-12SA and XR-2030X all use AH-15001, alongside the Eiki EIP-200. Sharp kept the same lamp across this generation of its XR range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith a 275W rating, is this a brighter lamp than most in this range?\u003c\/strong\u003e\u003cbr\u003e275W sits toward the higher end of the modules we list for these older business and classroom projectors, reflecting the brightness the Sharp XR and Eiki EIP-200 series were built around.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I check I'm ordering the right lamp among so many Sharp models?\u003c\/strong\u003e\u003cbr\u003eLook at the model plate on your Sharp or Eiki projector, and match it against the models listed here. If you can access your old lamp, checking for AH-15001, AN-XR10LP or 5001648 is the most direct confirmation.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182593552620,"sku":"LA-08900","price":155.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25185-xl.png?v=1786958297"},{"product_id":"an-c55lp-projector-lamp-module","title":"AN-C55LP projector lamp with module","description":"\u003cp\u003eAN-C55LP is a 300-watt lamp built into a complete module, meaning the bulb and its housing arrive as one unit ready to slot into place. It fits the Sharp XG-C55, XG-C55X, XG-C58, XG-C58X, XG-C58XA, XG-C60, XG-C60X, XG-C68, XG-C68X and XG-C68XA, all part of the same boardroom projector range.\u003c\/p\u003e\u003cp\u003eThis lamp is rated for 2000 hours of use. Because it is supplied as a module, installation is a straightforward swap of the whole unit rather than handling a bare bulb. We also list it under the alternative codes BQC-XGC55X\/1 and BQC-XGC55X_1, so if your old lamp carries either marking, AN-C55LP is still the correct match.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 300 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10251\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill AN-C55LP fit both the XG-C60 and XG-C68 models?\u003c\/strong\u003e\u003cbr\u003eYes. AN-C55LP is the listed replacement for the whole XG-C series covered here, including the XG-C55, XG-C58, XG-C60 and XG-C68 variants and their X and XA suffixes. Check your exact model number on the projector's rating label before ordering to be certain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the BQC-XGC55X\/1 code refer to?\u003c\/strong\u003e\u003cbr\u003eBQC-XGC55X\/1 and BQC-XGC55X_1 are alternative codes for this same lamp. Different suppliers and manuals sometimes print the code with a slash or an underscore, but both point to AN-C55LP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AN-C55LP arrive with its bulb pre-fitted in the housing?\u003c\/strong\u003e\u003cbr\u003eYes. AN-C55LP is supplied as a complete module, so the bulb is already fitted into its housing. You remove the old module from the projector and fit this one in its place, without handling the bulb separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should the AN-C55LP lamp last?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 2000 hours of use. Actual life depends on how the projector is run, including brightness mode and ventilation, so treat 2000 hours as the manufacturer rating rather than a guarantee.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector's lamp timer still shows a warning after fitting a new lamp. What should I do?\u003c\/strong\u003e\u003cbr\u003eMost Sharp XG-C projectors need the lamp timer reset manually from the on-screen menu after a replacement, otherwise the warning will keep appearing even with a new lamp fitted. Check your projector's manual for the exact menu path.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182621995244,"sku":"LA-10251","price":190.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/35073-xl.png?v=1786965277"},{"product_id":"an-xr20l2-projector-lamp-module","title":"AN-XR20L2 projector lamp with module","description":"\u003cp\u003eAN-XR20L2 covers an unusually wide spread of Sharp projectors: the PG-MB55, MB56, MB65, MB66X, MB675X and MB67X models, their X and XA variants, plus the XG-9180X, XG-MB55X-L, XG-MB56X, XG-MB65X-L and XG-MB67X-L. All fifteen share the same 275-watt lamp, supplied here as a complete module rather than a bare bulb.\u003c\/p\u003e\u003cp\u003eWith fifteen compatible models on file, the safest way to order is by checking the exact model printed on your projector rather than assuming from memory, since the PG-MB and XG-MB names look similar at a glance. AN-XR20L2 is the only code needed; no alternative part numbers are recorded for this lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10246\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 15 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eMy projector is a PG-MB65X — will AN-XR20L2 fit?\u003c\/strong\u003e\u003cbr\u003eYes, the PG-MB65X is one of the fifteen models this lamp is listed for, alongside the wider PG-MB and XG-MB range. Match the model number on your projector against the list on this page to be sure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the PG-MB and XG-MB names?\u003c\/strong\u003e\u003cbr\u003ePG-MB and XG-MB are two naming conventions Sharp used for closely related projectors in this range. Both use the same AN-XR20L2 lamp, so the naming difference does not affect which lamp to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there any other part numbers for this lamp?\u003c\/strong\u003e\u003cbr\u003eNo. AN-XR20L2 is the only code on file for this lamp across all fifteen compatible projector models, so there is no alternative number to check against your old unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes AN-XR20L2 include the lamp housing?\u003c\/strong\u003e\u003cbr\u003eYes, it is supplied as a complete module, with the 275-watt bulb already fitted into its housing, so you fit the whole unit rather than transferring a bulb between housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hours should the AN-XR20L2 provide before wearing out?\u003c\/strong\u003e\u003cbr\u003eAN-XR20L2 carries a 2000-hour rating. This figure comes from the manufacturer and reflects typical use; actual lamp life varies with projector settings and how often it is switched on and off.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182622912748,"sku":"LA-10246","price":151.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27683-xl.png?v=1786959011"},{"product_id":"an-r65lp2-projector-lamp","title":"AN-R65LP2 bare projector lamp","description":"\u003cp\u003eAN-R65LP2 is one of the less common cases where a single lamp crosses brands: it is fitted in the Sanyo PLV-Z2 projector as well as the Sharp 50DR650, 56DR650 and 65DR650 rear-projection televisions. It is a bare bulb only, meant to fit inside the housing your set already has.\u003c\/p\u003e\u003cp\u003eThis lamp carries several other codes on record, including 610-309-7589, POA-LMP69, 9NK3797300900, AN-R65LP1 and AN65LP1, reflecting how many different resellers and manuals have referred to it over the years. If your old lamp shows any of these markings, AN-R65LP2 is still the bare lamp to order.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10205\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow can the same lamp fit a Sanyo projector and a Sharp television?\u003c\/strong\u003e\u003cbr\u003eSanyo and Sharp shared components across some product lines, and the PLV-Z2 projector and the DR650 rear-projection sets happen to use the same bulb. AN-R65LP2 is listed against both because the lamp itself is identical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy old lamp is stamped POA-LMP69 — is this the right replacement?\u003c\/strong\u003e\u003cbr\u003eYes. POA-LMP69 is one of the codes recorded against this same lamp, alongside 610-309-7589, 9NK3797300900, AN-R65LP1 and AN65LP1. AN-R65LP2 is the current listing that covers all of these.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a version of this lamp that includes the housing?\u003c\/strong\u003e\u003cbr\u003eAN65LP1 is listed separately as the module version, with the bulb already fitted into a housing, for the same Sanyo and Sharp equipment. AN-R65LP2 here is the bare bulb only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a rear-projection television lamp, and does it work the same as a projector lamp?\u003c\/strong\u003e\u003cbr\u003eThe Sharp DR650 models are rear-projection televisions rather than standalone projectors, but the internal lamp works the same way and wears out in the same manner, which is why AN-R65LP2 fits both types of equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I handle this lamp safely during installation?\u003c\/strong\u003e\u003cbr\u003eLet the projector or television cool down fully before opening the lamp compartment, and avoid touching the glass of the bulb directly with bare fingers, since oils from skin can shorten its life.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182623994092,"sku":"LA-10205","price":144.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"ah-57201-projector-lamp-module","title":"AH-57201 projector lamp with module","description":"\u003cp\u003eAH-57201 is a 275-watt module lamp that crosses two brands, fitting the Eiki EIP-1500T as well as the Sharp DT-400 and XV-Z2000. Rated for 2000 hours, it arrives as a complete assembly with the housing already built in. Sharp also lists this identical part under the code AN-K2LP.\u003c\/p\u003e\u003cp\u003eWhether your lamp label shows AH-57201 or AN-K2LP, both codes describe the same module, so either is fine to search against your projector. Because it is a full module, fitting it is a straightforward swap of the entire housing assembly rather than handling a loose bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08898\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does a Sharp projector take an Eiki-coded lamp?\u003c\/strong\u003e\u003cbr\u003eThe EIP-1500T, DT-400 and XV-Z2000 were built around a shared optical engine, so despite carrying Eiki and Sharp badges, all three use the identical AH-57201 lamp module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs AN-K2LP the same part as AH-57201?\u003c\/strong\u003e\u003cbr\u003eYes. AN-K2LP is the code Sharp uses for this lamp, while AH-57201 is the number listed against the Eiki EIP-1500T — both describe one identical module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp arrive with the housing fitted?\u003c\/strong\u003e\u003cbr\u003eYes, AH-57201 is a complete module, with the bulb already seated in its housing, so you are replacing the full assembly rather than a bare bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I be sure which of my two part numbers to search?\u003c\/strong\u003e\u003cbr\u003eEither AH-57201 or AN-K2LP will bring up this same listing, so whichever code appears on your projector's existing lamp label is fine to use when ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAny preparation needed before swapping in the AH-57201?\u003c\/strong\u003e\u003cbr\u003eYes. Let the projector cool fully and unplug it before opening the lamp compartment, then confirm the new module's connector orientation matches the old one before sliding it into place.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182624452844,"sku":"LA-08898","price":155.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26286-xl.png?v=1786958710"},{"product_id":"an-d350lp-projector-lamp","title":"AN-D350LP bare projector lamp","description":"\u003cp\u003eAN-D350LP is listed against thirty-one Sharp projectors, spanning the PG-D2500X through PG-D3550W, the XG-D258XA through XG-D3580XA, and the older XR-50S, XR-55X and XR-N850XA models. It is a 210-watt bare bulb, so it fits inside the housing already present in whichever of these projectors you own.\u003c\/p\u003e\u003cp\u003eWith such a long compatibility list, the model number on your own projector is worth checking against the full list on this page rather than assuming from the series name alone, since PG-D, XG-D and XR badges were used across several distinct hardware generations. AN-D350LP is the only code recorded for this lamp, rated for 2000 hours.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 210 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10212\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 31 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp fit so many different Sharp models?\u003c\/strong\u003e\u003cbr\u003eSharp reused the same lamp engine across several projector generations sold under the PG-D, XG-D and XR names, even though the outer casings and model numbers changed. AN-D350LP is the part that connects all thirty-one models on record.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector is an XR-55XL — is that covered?\u003c\/strong\u003e\u003cbr\u003eThe list for this lamp includes XR-55X and XR-55XL together with the wider PG-D and XG-D range, so yes, the XR-55XL is one of the compatible models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs AN-D350LP a bare bulb or a full module?\u003c\/strong\u003e\u003cbr\u003eIt is a bare bulb only. There is no separate module version listed for this lamp, so it is designed to fit into the housing your projector already has installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat power draw and lifespan does the AN-D350LP offer?\u003c\/strong\u003e\u003cbr\u003eAN-D350LP is a 210-watt lamp rated for 2000 hours. This is the manufacturer's stated figure for typical use rather than a fixed guarantee of how long any individual bulb will last.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there alternative part numbers I should check my old lamp against?\u003c\/strong\u003e\u003cbr\u003eNo. AN-D350LP is the only code on file for this lamp across all thirty-one compatible projectors, so there is no alternative number to match against markings on your existing unit.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182624878828,"sku":"LA-10212","price":139.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"ah-11201-projector-lamp","title":"AH-11201 bare projector lamp","description":"\u003cp\u003eThree brands meet in AH-11201 — Eiki's EIP-1000T and EIP-1600T, the Marantz VP4001, and five Sharp models including the XV-Z3000 and XV-Z3000U. This 275-watt bare lamp is rated for 2000 hours and ships as a bulb only, for fitting inside the housing your projector already carries.\u003c\/p\u003e\u003cp\u003eYou may also find this bulb listed as AH11201 without the hyphen, or as AN-100LP under Sharp's own numbering — all three refer to the same lamp. Since it is a bare bulb, check your existing housing is free of cracks or scorch marks before reusing it.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08895\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does a Marantz projector share a lamp with Eiki and Sharp models?\u003c\/strong\u003e\u003cbr\u003eThe Marantz VP4001 was built on the same platform as several Eiki and Sharp projectors of the period, so despite the different badge, it takes the identical AH-11201 bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs AH11201 different from AH-11201?\u003c\/strong\u003e\u003cbr\u003eNo, they are the same code written with and without the hyphen — both refer to the identical bare lamp, as does the Sharp reference AN-100LP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a new housing along with this bulb?\u003c\/strong\u003e\u003cbr\u003eNot usually. AH-11201 is a bare lamp designed to fit inside your current housing, so a new housing is only needed if yours is physically damaged rather than simply worn from lamp use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit this bulb into my Sharp XV-Z3000?\u003c\/strong\u003e\u003cbr\u003eOpen the lamp door, usually secured by one or two screws, withdraw the old bulb from its housing carriage, and seat the new one the same way round before closing the door and screws again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the safest way to handle the old and new bulbs?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully before opening the lamp door, and avoid touching the new bulb's glass with bare fingers — hold it by the base or use a clean cloth to prevent oils marking the surface.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182625239276,"sku":"LA-08895","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"an65lp1-projector-lamp-module","title":"AN65LP1 projector lamp with module","description":"\u003cp\u003eAN65LP1 fits the Sharp 50DR650, 56DR650 and 65DR650 rear-projection televisions, the same three sets covered by the bare AN-R65LP2 lamp, but this version arrives as a complete module with the housing already built in. That makes it a full swap of the lamp assembly rather than a bulb-only replacement.\u003c\/p\u003e\u003cp\u003eAlternative codes recorded for this lamp include 9NK3797300900, AN-R65LP1 and AN-R65LP2, though the last of those is the bare-bulb listing rather than this module. Choose AN65LP1 if you want the housing included, or the bare version if your existing housing is still in good condition.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10211\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between AN65LP1 and AN-R65LP2?\u003c\/strong\u003e\u003cbr\u003eBoth fit the same Sharp DR650 rear-projection sets, but AN65LP1 is the complete module with housing included, while AN-R65LP2 is the bare bulb for reusing the housing you already have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace the housing every time, or only the bulb?\u003c\/strong\u003e\u003cbr\u003eIf your existing housing shows no cracks, discolouration or damage, a bare bulb such as AN-R65LP2 is often enough. AN65LP1 is the safer choice if the housing itself looks worn or you would rather not inspect it closely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes AN65LP1 fit the 65DR650 specifically?\u003c\/strong\u003e\u003cbr\u003eYes, the 65DR650 is one of three Sharp rear-projection sets this module is listed for, alongside the 50DR650 and 56DR650, and all three share the identical lamp engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy old lamp is marked 9NK3797300900 — is AN65LP1 correct?\u003c\/strong\u003e\u003cbr\u003e9NK3797300900 is recorded as an alternative code for this lamp, so yes, AN65LP1 is the current listing that replaces a unit carrying that marking, whichever of the three DR650 sets you have it installed in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit a module lamp like this one?\u003c\/strong\u003e\u003cbr\u003eSwitch off and unplug the set, let it cool fully, then remove the old lamp assembly as a single unit and fit AN65LP1 in its place, following the access panel instructions in your set's manual.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182625566956,"sku":"LA-10211","price":130.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"an-b10lp-projector-lamp-module","title":"AN-B10LP projector lamp with module","description":"\u003cp\u003eAN-B10LP is fitted in the Saville AV Educator SS-1200 and Saville AV SS-1200, and separately in the Sharp PG-B10S, Sharp BQC-PGB10S\/1, PG-BN120S and XV-Z10E, which points to Saville having sourced its projector engine from Sharp for these units. It comes as a complete module, housing included.\u003c\/p\u003e\u003cp\u003eAlternative part numbers on record include AV AN-B10LP, AV BQC-PGB10S and BQC-PGB10S, which reflect the Saville-branded packaging some of these lamps originally shipped in. Whichever brand's code appears on your old lamp, AN-B10LP is the module that replaces it, so there is no need to search separately for a Saville-specific listing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10210\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 6 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eI have a Saville AV Educator SS-1200 — will a Sharp-listed lamp actually fit?\u003c\/strong\u003e\u003cbr\u003eYes. The Saville AV Educator SS-1200 and Sharp PG-B10S share the same lamp, AN-B10LP, which is why both brands appear on this listing. The hardware behind the two badges is the same.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the AV prefix mean on some of the alternative codes?\u003c\/strong\u003e\u003cbr\u003eAV AN-B10LP and AV BQC-PGB10S are the same lamp codes as sold under Saville AV's own branding. They are not separate parts, simply the same lamp listed with Saville's packaging prefix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AN-B10LP ready to install straight out of the box?\u003c\/strong\u003e\u003cbr\u003eYes, AN-B10LP is supplied as a complete module with the housing already fitted, so installation involves swapping the whole unit rather than transferring a bulb into your existing cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sharp models use the same lamp as the Saville SS-1200?\u003c\/strong\u003e\u003cbr\u003eThe Sharp PG-B10S, PG-BN120S and XV-Z10E all use this lamp, along with the Sharp-branded version listed as BQC-PGB10S\/1, which is why one module covers such a wide spread of otherwise unrelated-looking model names.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which part number is printed on my old lamp?\u003c\/strong\u003e\u003cbr\u003eCheck the label on the lamp module or housing itself, or the projector's own documentation. Any of AN-B10LP, AV AN-B10LP, BQC-PGB10S or AV BQC-PGB10S found there confirms this is the correct replacement.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182626287852,"sku":"LA-10210","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28185-xl.png?v=1786959066"},{"product_id":"an-p610lp-projector-lamp","title":"AN-P610LP bare projector lamp","description":"\u003cp\u003eAN-P610LP fits eight Sharp installation projectors: the XG-P560W, XG-P560W-N, XG-P560WA, XG-P610X, XG-P610X-N, XG-P610XA, XG-P610XN and XG-P810XA. It is a 280-watt bulb sold without a housing, rated for 2000 hours, and intended for anyone whose existing lamp housing is still sound and simply needs a fresh bulb inside it.\u003c\/p\u003e\u003cp\u003eA module version of this same lamp is also listed separately if your housing needs replacing at the same time as the bulb. AN-P610LP itself has no other part numbers recorded, so match the model of your Sharp XG-P projector carefully, since the P560 and P610 ranges use different fittings despite the shared lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 280 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10264\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy would I choose the bare bulb over the module version?\u003c\/strong\u003e\u003cbr\u003eIf the housing already inside your XG-P610X or XG-P560W is undamaged, a bare bulb like AN-P610LP is a cheaper way to replace just the failing part. Choose the module version instead if the housing itself needs replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the same lamp really fit both the P560 and P610 series?\u003c\/strong\u003e\u003cbr\u003eYes, AN-P610LP is listed against all eight models across the P560W and P610X ranges, plus the XG-P810XA. The lamp engine is shared even though the projector bodies differ.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage is this lamp, and how long is it rated to last?\u003c\/strong\u003e\u003cbr\u003eAN-P610LP is a 280-watt lamp rated for 2000 hours. That figure is the manufacturer's stated rating for standard use rather than a promise of exact lamp life in every installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit a bare bulb without damaging it?\u003c\/strong\u003e\u003cbr\u003eAvoid touching the glass envelope with bare fingers, since skin oils can cause hot spots and shorten the bulb's life. Handle it by the base or ceramic housing edge, and let the projector cool fully before you begin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eI can't tell if my projector is a P560W or P610X — does it matter?\u003c\/strong\u003e\u003cbr\u003eIt does. Although AN-P610LP fits both families, always confirm the exact model printed on your projector before ordering, since the wider XG-P range includes several visually similar but distinct models.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182627107052,"sku":"LA-10264","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"an-p25lp-projector-lamp-module","title":"AN-P25LP projector lamp with module","description":"\u003cp\u003eAN-P25LP is built for four closely related Sharp projectors: the XG-P24X, XG-P25X, XG-P25XE and XG-P25XU. It arrives as a full module, bulb and housing together, so fitting it means removing the old assembly as one piece and locking the new one into place, rather than handling a loose bulb.\u003c\/p\u003e\u003cp\u003eThis lamp is also recorded under BQC-XGP25X\/\/1, BQC-XGP25X_1 and RLMPFA002WJZZ, an OEM-style code that turns up on some third-party manuals. Any of those markings on your existing lamp point back to AN-P25LP, so there is no need to track down a separate part for an XG-P24X compared with an XG-P25X.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10263\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the RLMPFA002WJZZ code mean?\u003c\/strong\u003e\u003cbr\u003eRLMPFA002WJZZ is an OEM-style alternative code recorded for this same lamp, distinct from the Sharp and BQC-prefixed numbers. If you find it printed on your old lamp, AN-P25LP is still the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a difference between the XG-P24X and XG-P25X lamps?\u003c\/strong\u003e\u003cbr\u003eNo, both models along with the XG-P25XE and XG-P25XU share the same AN-P25LP module, so the model differences do not affect which lamp you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes AN-P25LP include the housing?\u003c\/strong\u003e\u003cbr\u003eYes. It is supplied as a complete module with the housing already fitted around the bulb, so you replace the whole assembly rather than a bulb on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I order the correct part if my lamp has no visible code?\u003c\/strong\u003e\u003cbr\u003eIf the old lamp's markings have worn away, match your projector's model number instead against the XG-P24X, XG-P25X, XG-P25XE and XG-P25XU models listed here, since AN-P25LP covers all four.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat preparation does an XG-P24X need before the AN-P25LP goes in?\u003c\/strong\u003e\u003cbr\u003eMake sure the projector is switched off, unplugged and fully cooled, then release the old module using the latch or screws specified in your XG-P manual before fitting AN-P25LP in its place.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182627795180,"sku":"LA-10263","price":155.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/24432-xl.png?v=1786957694"},{"product_id":"ah-35001-projector-lamp-module","title":"AH-35001 projector lamp module","description":"\u003cp\u003eThe Eiki EIP-3500 and Sharp XG-MB70X are the same projector sold under two brand names, and AH-35001 is the lamp that fits both. Rated at 275W with a 2000 hour life, it comes as a complete module, housing included, so fitting is a direct swap.\u003c\/p\u003e\u003cp\u003eSharp's own catalogue lists this lamp as AN-MB70LP or PG-MB70X — both identical to AH-35001. Because the EIP-3500 and XG-MB70X share a single hardware platform under different branding, you only need to confirm which of the two model names matches your unit; the lamp itself does not differ between them. As a full module, there is no housing to transfer from your old lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08906\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAre the Eiki EIP-3500 and Sharp XG-MB70X really the same projector?\u003c\/strong\u003e\u003cbr\u003eFor lamp purposes, yes — both use the identical AH-35001 module, which is why they are listed together here rather than as two unrelated parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs AN-MB70LP the same part as AH-35001?\u003c\/strong\u003e\u003cbr\u003eYes, AN-MB70LP and PG-MB70X are Sharp's own codes for the same lamp sold elsewhere as AH-35001, so any of the three references describes this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the Eiki and Sharp badge versions share the AH-35001's specs?\u003c\/strong\u003e\u003cbr\u003eYes — 275W with a 2000 hour rated life, figures that apply equally whichever of the two brand names your projector carries, Eiki or Sharp, since the hardware is shared.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this come as a bare bulb or with housing?\u003c\/strong\u003e\u003cbr\u003eIt is supplied as a complete module, with the bulb already seated in its housing, ready to fit as one piece rather than needing to be paired with your old carrier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm this is the right lamp for my Sharp projector?\u003c\/strong\u003e\u003cbr\u003eCheck that your model is specifically the XG-MB70X; Sharp's wider projector range uses a variety of different lamps, so the model number is the detail that matters here.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182627959020,"sku":"LA-08906","price":139.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23845-xl.png?v=1786957097"},{"product_id":"an-ph7lp1-projector-lamp","title":"AN-PH7LP1 bare projector lamp","description":"\u003cp\u003eThe Sharp XG-PH70X, XG-PH70X-N, XG-PH800X and XG-PH900X run two lamps at once for extra brightness, and AN-PH7LP1 is specifically the left-hand one of that pair. It is a bare bulb, so it fits into the existing left-side housing, and it should not be swapped for the separately listed right-hand lamp.\u003c\/p\u003e\u003cp\u003eDual-lamp projectors like these mark each bay as left or right inside the lamp compartment, so open the housing and check which side needs replacing before you order. AN-PH7LP1 also has an alternative code, AN-PH7LP1\/1, for the same left-position bulb. A module version with housing included is listed separately.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10266\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need the left or right lamp?\u003c\/strong\u003e\u003cbr\u003eOpen the lamp compartment on your XG-PH70X, XG-PH800X or XG-PH900X and check the marking next to each bay, usually stamped L or R. AN-PH7LP1 is the left-hand lamp; a separate listing covers the right-hand one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if I fit the wrong side by mistake?\u003c\/strong\u003e\u003cbr\u003eThe lamp itself may still power on, but it is not the position the projector expects for that bay, so it is best to confirm the side marking rather than guess, particularly on projectors that report lamp position in their error logs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes AN-PH7LP1 come with a housing?\u003c\/strong\u003e\u003cbr\u003eThis listing is the bare bulb only. A module version of the same left-position lamp, with the housing included, is available separately if your existing housing needs replacing too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is AN-PH7LP1\/1?\u003c\/strong\u003e\u003cbr\u003eAN-PH7LP1\/1 is an alternative code recorded for the same left-position lamp as AN-PH7LP1, so either marking found on your old bulb or its packaging points to this same replacement part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do these projectors use two lamps instead of one?\u003c\/strong\u003e\u003cbr\u003eRunning two lamps together gives the XG-PH70X, XG-PH800X and XG-PH900X higher overall brightness than a single-lamp design, which suits larger venues, though it means each side must be replaced with the correctly positioned lamp.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182628483308,"sku":"LA-10266","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32120-lg.png?v=1786959684"},{"product_id":"bqc-xgp10xe-1-projector-lamp","title":"BQC-XGP10XE\/1 bare projector lamp","description":"\u003cp\u003eBQC-XGP10XE\/1 fits two Sharp projectors, the XG-P10XE and XG-P10XU, which share the same internal lamp despite carrying different regional model suffixes. This is the bare bulb version, sold without a housing, for fitting into the lamp cage already installed inside either of these two projectors.\u003c\/p\u003e\u003cp\u003eCLMPF0064CE01 is recorded as an alternative code for this same lamp, and a module version with housing included, BQC-XGP10XU, is listed separately for anyone whose housing needs replacing as well. Check whether your old lamp's housing is cracked or worn before deciding between the bare and module listings.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10260\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between BQC-XGP10XE\/1 and BQC-XGP10XU?\u003c\/strong\u003e\u003cbr\u003eBQC-XGP10XE\/1 is the bare bulb for the XG-P10XE and XG-P10XU projectors, while BQC-XGP10XU is the module version of the same lamp with the housing already fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs CLMPF0064CE01 the same lamp as this one?\u003c\/strong\u003e\u003cbr\u003eYes, CLMPF0064CE01 is recorded as an alternative code for this exact bare lamp, so if that is what is printed on your old bulb, BQC-XGP10XE\/1 is the correct match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the XG-P10XE use a different lamp from the XG-P10XU?\u003c\/strong\u003e\u003cbr\u003eNo, both models are listed against this same bare lamp, so the regional suffix on your projector's model number does not change which part to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I check whether I need the bare bulb or the module?\u003c\/strong\u003e\u003cbr\u003eOpen the lamp compartment and inspect the housing for cracks, discolouration or a loose fitting. If it still looks sound, the bare BQC-XGP10XE\/1 bulb is enough; if not, the module version is the safer choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOnce the BQC-XGP10XE\/1 is swapped in, how should the old bulb be treated?\u003c\/strong\u003e\u003cbr\u003eLet it cool completely before removing it, and avoid dropping or shaking it, since projector lamps operate under pressure and can be prone to shattering if mishandled once removed.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182629269740,"sku":"LA-10260","price":178.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32158-lg.png?v=1786959684"},{"product_id":"bqc-xgnv7xe-1-projector-lamp","title":"BQC-XGNV7XE\/1 bare projector lamp","description":"\u003cp\u003eBQC-XGNV7XE\/1 is listed for just two Sharp projectors, the XG-NV7 and XG-NV7XE, a small and specific compatibility list compared with some of Sharp's larger installation ranges. It is supplied as a bare bulb only, with no separate part numbers recorded, so fitting it means reusing the housing already in your projector.\u003c\/p\u003e\u003cp\u003eBecause no alternative codes are on file for this lamp, matching the projector model is the most direct way to confirm fit: check that your unit reads XG-NV7 or XG-NV7XE before ordering. Watts and lamp life are not published for this particular model, so treat the projector's own manual as the reference for those figures.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10259\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the XG-NV7 and XG-NV7XE?\u003c\/strong\u003e\u003cbr\u003eBoth models are covered by this same lamp listing, BQC-XGNV7XE\/1, so whichever of the two you own, the same bare bulb is the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't the wattage listed for this lamp?\u003c\/strong\u003e\u003cbr\u003eWe only publish specifications that are confirmed on record, and wattage is not currently available for this model, so we have left it out rather than estimate a figure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other part numbers I should check for?\u003c\/strong\u003e\u003cbr\u003eNo, BQC-XGNV7XE\/1 is the only code recorded for this lamp, so there is no alternative marking to look for on your existing unit, and no module version is listed as a separate part either.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the BQC-XGNV7XE\/1 cover the housing as well as the bulb?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare bulb only. It is designed to fit inside the housing your XG-NV7 or XG-NV7XE already has installed, and no module version with housing is currently listed for either model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe photo on this listing doesn't look detailed — is that normal?\u003c\/strong\u003e\u003cbr\u003eYes, a generic product image is used here rather than a photo of this specific lamp, so rely on the model match and part number rather than the picture when confirming fit.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182629957868,"sku":"LA-10259","price":144.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"an-p610lp-projector-lamp-module","title":"AN-P610LP projector lamp with module","description":"\u003cp\u003eThis is the module edition of AN-P610LP, built for the same eight Sharp projectors as the bare version: the XG-P560W, XG-P560W-N, XG-P560WA, XG-P610X, XG-P610X-N, XG-P610XA, XG-P610XN and XG-P810XA. Here the 280-watt bulb comes already fitted into a new housing, so the whole assembly is replaced in one go.\u003c\/p\u003e\u003cp\u003eChoosing the module over the bare bulb makes sense if your current housing is old, discoloured, or you would simply rather not inspect it. AN-P610LP has no other part numbers on file, and this listing is rated for 2000 hours, the same as the bare version of the same lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 280 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10265\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs this the same lamp as the bare AN-P610LP listing?\u003c\/strong\u003e\u003cbr\u003eYes, the bulb itself is the same 280-watt, 2000-hour lamp. The difference is that this listing includes a new housing built around it, rather than the bulb alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen is it worth paying for the module instead of the bare bulb?\u003c\/strong\u003e\u003cbr\u003eIf the housing in your XG-P610X or XG-P560W is cracked, warped, or has been in service a long time, the module version replaces both parts together rather than leaving a tired housing in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this module fit an XG-P810XA?\u003c\/strong\u003e\u003cbr\u003eYes, the XG-P810XA is one of the eight models this module is listed for, alongside the wider XG-P560 and XG-P610 ranges, all of which take the same 280-watt lamp assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit a full lamp module?\u003c\/strong\u003e\u003cbr\u003ePower off and unplug the projector, allow it to cool, then release the old lamp assembly using the latch or screws in the lamp bay and slide the new module in until it locks into place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the housed AN-P610LP last as long as the bare version?\u003c\/strong\u003e\u003cbr\u003eYes, it carries the same 2000-hour rating as the bare version of AN-P610LP, since both use the identical 280-watt bulb; only the housing differs between the two listings.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182630711532,"sku":"LA-10265","price":178.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34524-xl.png?v=1786962736"},{"product_id":"bqc-xgp10xu-projector-lamp-module","title":"BQC-XGP10XU projector lamp with module","description":"\u003cp\u003eBQC-XGP10XU is the module counterpart to the bare BQC-XGP10XE\/1 lamp, fitting the same Sharp XG-P10XE and XG-P10XU projectors. Rather than a loose bulb, this version arrives with the housing already built around it, ready to drop into place as a complete replacement for the ageing lamp assembly.\u003c\/p\u003e\u003cp\u003eThis lamp is also recorded under BQC-XGP10XE\/1 and CLMPF0064CE01, though the first of those is the bare-bulb listing rather than this module, so check whether your projector needs the housing replaced before choosing between them. Pick this module if the existing housing looks worn or you prefer not to inspect it closely.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs BQC-XGP10XU the bare or module version?\u003c\/strong\u003e\u003cbr\u003eThis listing is the module version, with the housing already fitted around the bulb. The bare-bulb equivalent for the same projectors is listed separately as BQC-XGP10XE\/1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit both the XG-P10XE and XG-P10XU?\u003c\/strong\u003e\u003cbr\u003eYes, both models share this same lamp, so the specific regional suffix on your projector does not change which module to order, and the same applies to the bare-bulb version listed separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does CLMPF0064CE01 refer to?\u003c\/strong\u003e\u003cbr\u003eCLMPF0064CE01 is an alternative code recorded for this lamp family, alongside BQC-XGP10XE\/1. Any of these markings on your old lamp point to the same replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I decide between the bare bulb and this module?\u003c\/strong\u003e\u003cbr\u003eInspect your current housing for cracks or discolouration. If it looks sound, the bare BQC-XGP10XE\/1 bulb is sufficient; if it looks worn, this module replaces both the bulb and housing together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a menu step required on an XG-P projector after this module goes in?\u003c\/strong\u003e\u003cbr\u003eYes. Most Sharp XG-P projectors need the lamp hour counter reset from the menu system after a replacement, so check your projector's manual for the exact steps once the new module is fitted.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182631432428,"sku":"LA-10261","price":146.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/24802-xl.png?v=1786958021"},{"product_id":"an-k10lp-projector-lamp-module","title":"AN-K10LP projector lamp with module","description":"\u003cp\u003eAN-K10LP is built for Sharp's XV-Z1000 home cinema projectors, covering the XV-Z1000, XV-Z1000E and the XV-Z10000, XV-Z10000E, XV-Z10000K and XV-Z10000U variants. These were higher-end models aimed at dedicated home theatre rooms rather than offices, and the lamp is supplied here as a full module with housing included.\u003c\/p\u003e\u003cp\u003eBQC-XVZ100001 is recorded as an alternative code for this same lamp, so a marking like that on your old module still points to AN-K10LP. Watts and rated hours are not published for this model, so plan replacement around picture dimming and colour shift rather than a fixed hour count.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10273\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 6 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the XV-Z1000 and XV-Z10000 ranges?\u003c\/strong\u003e\u003cbr\u003eThe XV-Z10000 range sits above the original XV-Z1000 as a later generation of Sharp's home cinema projectors, but both use the same AN-K10LP lamp module, so the generation gap does not affect which part to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know when a home cinema lamp like this needs replacing?\u003c\/strong\u003e\u003cbr\u003eWatch for the picture dimming noticeably, colours shifting, or the projector's own lamp warning appearing on screen. Since rated hours are not published for this model, these visible signs are a more reliable guide than a fixed hour count.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs BQC-XVZ100001 a separate lamp from AN-K10LP?\u003c\/strong\u003e\u003cbr\u003eNo, it is an alternative code for the same lamp. If your old module carries that marking, AN-K10LP is still the correct replacement to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes AN-K10LP include the housing?\u003c\/strong\u003e\u003cbr\u003eYes, it is supplied as a full module with the housing already fitted around the bulb, matching the format used across the XV-Z1000 and XV-Z10000 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this lamp fit the XV-Z10000K specifically?\u003c\/strong\u003e\u003cbr\u003eYes, the XV-Z10000K is one of six models this module is listed for, alongside the XV-Z1000, XV-Z1000E, XV-Z10000, XV-Z10000E and XV-Z10000U, all built around the same lamp engine.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182632120556,"sku":"LA-10273","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26301-xl.png?v=1786958709"},{"product_id":"an-ph80lp-projector-lamp-module","title":"AN-PH80LP projector lamp with module","description":"\u003cp\u003eAN-PH80LP spans nine Sharp projectors built around the same lamp platform: the XG-PH80W, XG-PH80W-N, XG-PH80WN, XG-PH80X, XG-PH80X-N, XG-PH80XA, XG-PH80XN, XG-PH80XW and XG-PH85WG. The W and X suffixes generally mark widescreen and standard aspect versions, but all nine share this one module, supplied here with housing included.\u003c\/p\u003e\u003cp\u003eNo alternative part numbers are recorded beyond AN-PH80LP itself, so there is a single code to check against your old lamp regardless of which of the nine XG-PH80 variants you own. A bare-bulb version of the same lamp is listed separately for anyone whose current housing does not need replacing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10271\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 9 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the W and X suffixes on the XG-PH80 models?\u003c\/strong\u003e\u003cbr\u003eThe W-suffixed models such as XG-PH80W are generally the widescreen versions, while the X-suffixed models are standard aspect ratio, but AN-PH80LP fits all nine variants regardless of that difference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I buy the module or the bare bulb for this projector?\u003c\/strong\u003e\u003cbr\u003eThat depends on your current housing. If it is undamaged, the bare-bulb listing of this same lamp is enough; this module version replaces the housing as well, which suits an older or worn unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes AN-PH80LP fit the XG-PH85WG as well as the XG-PH80 models?\u003c\/strong\u003e\u003cbr\u003eYes, the XG-PH85WG is included among the nine compatible projectors, despite its slightly different model number, and it takes the identical module as the rest of the XG-PH80 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other part numbers I should check my old lamp against?\u003c\/strong\u003e\u003cbr\u003eNo, AN-PH80LP is the only code on record for this lamp across all nine XG-PH80 variants, so there is no separate alternative number to search for on your existing unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit a full module into the XG-PH80 projector?\u003c\/strong\u003e\u003cbr\u003ePower down and unplug the projector, let it cool, then release the lamp door and old assembly as instructed in your XG-PH80 manual before sliding the new AN-PH80LP module into place.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182633005292,"sku":"LA-10271","price":151.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25867-xl.png?v=1786958653"},{"product_id":"an-ph7lp2-projector-lamp","title":"AN-PH7LP2 bare projector lamp","description":"\u003cp\u003eAN-PH7LP2 is the right-hand lamp in the pair fitted to the Sharp XG-PH70X, XG-PH70X-N, XG-PH800X and XG-PH900X, projectors that run two bulbs together for extra brightness. It is supplied bare, without a housing, and it is not interchangeable with the left-hand lamp listed separately as AN-PH7LP1.\u003c\/p\u003e\u003cp\u003eBefore ordering, open the lamp compartment and check whether the bay marked R needs replacing, since fitting a right-position lamp into the wrong bay is a common mistake with dual-lamp projectors. AN-PH7LP2\/1 is recorded as an alternative code for this same right-position bulb, and a module version is listed separately.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10268\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow do I tell the left and right lamp bays apart?\u003c\/strong\u003e\u003cbr\u003eSharp marks each bay inside the lamp compartment, usually with an L or R stamp near the connector. AN-PH7LP2 is the right-hand lamp; check this marking before ordering rather than guessing from position alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I fit AN-PH7LP2 in place of AN-PH7LP1?\u003c\/strong\u003e\u003cbr\u003eNo, the two are not interchangeable even though they are the same wattage and fit the same projectors, because each is built for its specific side of the dual-lamp bay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is AN-PH7LP2\/1?\u003c\/strong\u003e\u003cbr\u003eAN-PH7LP2\/1 is an alternative code for this same right-position lamp, so either marking on your old bulb or its box confirms this is the correct replacement to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AN-PH7LP2 sold here as a housed unit?\u003c\/strong\u003e\u003cbr\u003eNo, this is the bare bulb only. A module version of the same right-position lamp, with housing included, is available as a separate listing for anyone whose housing needs replacing too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the XG-PH900X need two separate lamp listings instead of one?\u003c\/strong\u003e\u003cbr\u003eBecause it runs two lamps side by side, each bay is a distinct fitting, so Sharp and, in turn, this catalogue list the left and right lamps as separate parts rather than a single interchangeable one.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182633627884,"sku":"LA-10268","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32123-lg.png?v=1786959685"},{"product_id":"an-k15lp-projector-lamp","title":"AN-K15LP bare projector lamp","description":"\u003cp\u003eAN-K15LP fits six Sharp home cinema projectors spanning three generations: the XV-Z15000, XV-Z15000A and XV-Z15000U, through to the XV-Z17000 and XV-Z17000U, and finally the XV-Z18000. It is a bare bulb, so it is meant to be fitted into whichever of these projectors' existing housings you already have.\u003c\/p\u003e\u003cp\u003eNo alternative part numbers are recorded for AN-K15LP, and no wattage or lamp-life figures are published for this model, so rely on the projector's own manual for those details. A module version with housing included is also listed, worth choosing if your current housing looks aged or discoloured.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10275\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 6 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes AN-K15LP fit all three generations of this projector line?\u003c\/strong\u003e\u003cbr\u003eYes, it is listed for the original XV-Z15000, the XV-Z17000 and the later XV-Z18000, along with the XV-Z15000A, XV-Z15000U and XV-Z17000U variants, six models in total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy aren't the watts or lamp life shown for this lamp?\u003c\/strong\u003e\u003cbr\u003eThose figures are not published for this model, so rather than estimate a number, we have left them out. Your projector's manual is the best source for that information.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan XV-Z15000 owners get the AN-K15LP in housed form?\u003c\/strong\u003e\u003cbr\u003eYes, a module version with the housing included is listed separately, which suits anyone whose existing housing shows wear rather than just a failing bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my XV-Z17000 needs the U variant lamp or the standard one?\u003c\/strong\u003e\u003cbr\u003eAN-K15LP covers both the XV-Z17000 and XV-Z17000U, so the regional suffix does not change which lamp to order, and the same single listing applies to the rest of the range too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check on the housing before fitting a bare bulb?\u003c\/strong\u003e\u003cbr\u003eLook for cracks, warping or heavy discolouration around the reflector. If the housing looks sound, a bare bulb like AN-K15LP is enough; if it looks damaged, consider the module version instead.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182634381548,"sku":"LA-10275","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"an-ph80lp-projector-lamp","title":"AN-PH80LP bare projector lamp","description":"\u003cp\u003eAN-PH80LP is also available as a bare bulb rather than a full module, for the same nine XG-PH80 projectors: XG-PH80W, XG-PH80W-N, XG-PH80WN, XG-PH80X, XG-PH80X-N, XG-PH80XA, XG-PH80XN, XG-PH80XW and XG-PH85WG. Choose this bare version if the housing fitted in your projector is still in good condition and only the bulb has failed.\u003c\/p\u003e\u003cp\u003eNo alternative part numbers are recorded for this lamp beyond AN-PH80LP itself, matching the module version. Because it is bare, handle it by the base rather than the glass during fitting, and let the projector cool fully first, since the lamp compartment on these installation models can retain heat for some time.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10270\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 9 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between this bare lamp and the AN-PH80LP module?\u003c\/strong\u003e\u003cbr\u003eThe bulb is identical in both. This bare version leaves your existing housing in place, while the separately listed module replaces the housing as well as the bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this bare bulb in an XG-PH80XN?\u003c\/strong\u003e\u003cbr\u003eYes, the XG-PH80XN is one of the nine models this bare lamp is listed for, along with the wider XG-PH80W and XG-PH80X range, all of which share the same lamp engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I remove the old bulb without damaging the housing?\u003c\/strong\u003e\u003cbr\u003eFollow the release mechanism described in your XG-PH80 manual, usually a latch or small screws, and lift the bulb straight out rather than twisting it, to avoid stressing the housing's contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes skin contact harm the glass of the AN-PH80LP?\u003c\/strong\u003e\u003cbr\u003eIt can. Skin oils on the glass can create hot spots once the lamp is powered on, so handle it by its base or use a clean cloth if the glass must be touched.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bare lamp carry the same rating as the module version?\u003c\/strong\u003e\u003cbr\u003eWatts and hours are not published for this model in either the bare or module listing, so both versions should be treated the same way when it comes to planning replacement timing.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182635167980,"sku":"LA-10270","price":178.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32126-lg.png?v=1786959683"},{"product_id":"bqc-xgv10wu-1-projector-lamp","title":"BQC-XGV10WU\/1 bare projector lamp","description":"\u003cp\u003eBQC-XGV10WU\/1 is the bare lamp fitted across three Sharp projectors: the XG-V10W, XG-V10WE and XG-V10XE, an older range that predates many of Sharp's later naming conventions. No wattage or hours figure is published for this lamp, so this listing covers compatibility and fit rather than a specific performance rating.\u003c\/p\u003e\u003cp\u003eThe same lamp is also recorded under BQC-XGV10WU, without the \/1 suffix, which some earlier documentation used instead. Both codes point to the same bare bulb, and no module version with housing is currently listed for this range, so this is the only fitting option recorded for the XG-V10 series.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10272\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the \/1 at the end of BQC-XGV10WU\/1 mean?\u003c\/strong\u003e\u003cbr\u003eIt marks a revision of the same code; BQC-XGV10WU without the suffix refers to the identical bare lamp. Either marking on your old bulb confirms this is the right replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a module version of this lamp with housing included?\u003c\/strong\u003e\u003cbr\u003eNo, only the bare bulb is currently listed for the Sharp XG-V10W, XG-V10WE and XG-V10XE range, so this is the fitting option available for these projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit the XG-V10XE as well as the XG-V10W?\u003c\/strong\u003e\u003cbr\u003eYes, all three models, the XG-V10W, XG-V10WE and XG-V10XE, share this same bare lamp, and no separate listing exists for any one of them individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the BQC-XGV10WU\/1 listing omit a power figure?\u003c\/strong\u003e\u003cbr\u003eThat figure is not published for this model, so it has been left out rather than estimated. The projector's own documentation is the place to check for that detail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow old is this projector range roughly?\u003c\/strong\u003e\u003cbr\u003eThe XG-V10 naming style is from an earlier generation of Sharp's projector lineup, predating some of the model-naming conventions used on newer ranges, though the lamp itself remains available under BQC-XGV10WU\/1.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182635823340,"sku":"LA-10272","price":146.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26390-lg.png?v=1786958715"},{"product_id":"an-ph7lp1-projector-lamp-module","title":"AN-PH7LP1 projector lamp with module","description":"\u003cp\u003eThis module version of AN-PH7LP1 pairs the left-position lamp with a new housing, for the same dual-lamp Sharp projectors as the bare listing: the XG-PH70X, XG-PH70X-N, XG-PH800X and XG-PH900X. It replaces the entire left-bay assembly, which suits a housing that has become worn rather than just a dimming bulb.\u003c\/p\u003e\u003cp\u003eBecause these projectors run two lamps side by side, fitting this left-position module into the right-hand bay is not correct even though the two sides look similar; check the L marking inside the compartment first. AN-PH7LP1\/1 is recorded as an alternative code for the same left-position lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10267\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIf I'm replacing both lamps at once, do I need two module listings?\u003c\/strong\u003e\u003cbr\u003eYes, the left and right positions are sold as separate parts. This listing, AN-PH7LP1, is only the left-position module; the right-hand side needs the AN-PH7LP2 module ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it worth buying the module instead of the bare left-position bulb?\u003c\/strong\u003e\u003cbr\u003eIf the left-bay housing looks worn, cracked or discoloured, this module replaces it along with the bulb. If the housing still looks sound, the bare AN-PH7LP1 listing is a cheaper option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I be sure I'm looking at the left bay and not the right?\u003c\/strong\u003e\u003cbr\u003eSharp marks each bay inside the lamp compartment, typically stamped L or R near the lamp connector. Confirm this marking before fitting the module rather than relying on which side feels more accessible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is AN-PH7LP1\/1?\u003c\/strong\u003e\u003cbr\u003eIt is an alternative code recorded for this same left-position lamp, so a module marked either AN-PH7LP1 or AN-PH7LP1\/1 is the correct part to order for the left-hand bay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes replacing one lamp module reset the projector's dual-lamp balance automatically?\u003c\/strong\u003e\u003cbr\u003eSome Sharp dual-lamp projectors track each bay's usage separately and will flag the newly fitted lamp differently from the older one until its own hours accumulate; check your projector's lamp menu after fitting.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182636609772,"sku":"LA-10267","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23755-xl.png?v=1786957089"},{"product_id":"an-k12lp-projector-lamp-module","title":"AN-K12LP projector lamp with module","description":"\u003cp\u003eAN-K12LP is listed for just two Sharp home cinema projectors, the XV-Z11000 and XV-Z12000, sitting between the wider XV-Z1000 and XV-Z15000 ranges in Sharp's home theatre lineup. It arrives as a complete module, bulb and housing together, so the entire lamp assembly is replaced as a single unit.\u003c\/p\u003e\u003cp\u003eBQC-XVZ100005 is recorded as an alternative code for this same module, so either marking on your existing lamp confirms AN-K12LP as the replacement. No bare-bulb version is listed separately for the XV-Z11000 or XV-Z12000, so this module is the fitting option currently available for these two projectors.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10274\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow does the XV-Z12000 compare with the XV-Z11000 in terms of the lamp used?\u003c\/strong\u003e\u003cbr\u003eBoth models share the identical AN-K12LP module, so the differences between the two projectors do not extend to the lamp itself, and either model number confirms the same part is correct.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is BQC-XVZ100005?\u003c\/strong\u003e\u003cbr\u003eIt is an alternative code recorded for this same lamp module, so if your old unit is marked that way rather than AN-K12LP, it is still the correct part to reorder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bare-bulb option available for the XV-Z11000?\u003c\/strong\u003e\u003cbr\u003eNo, only the complete module is currently listed for the XV-Z11000 and XV-Z12000, so there is no separate bare-bulb version to choose between for these two models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does this projector sit in Sharp's home cinema range?\u003c\/strong\u003e\u003cbr\u003eThe XV-Z11000 and XV-Z12000 sit between the earlier XV-Z1000 series and the later XV-Z15000 range, though the lamp module itself, AN-K12LP, is specific to just these two models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit this module correctly?\u003c\/strong\u003e\u003cbr\u003ePower down and unplug the projector, let it cool fully, then release the old assembly using the catch described in your XV-Z11000 or XV-Z12000 manual and slide AN-K12LP into place until it clicks.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182637330668,"sku":"LA-10274","price":185.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/21390-xl.png?v=1786956918"},{"product_id":"an-k15lp-projector-lamp-module","title":"AN-K15LP projector lamp with module","description":"\u003cp\u003eThis module edition of AN-K15LP pairs the bulb with a new housing, covering the same six Sharp home cinema projectors as the bare listing: the XV-Z15000, XV-Z15000A, XV-Z15000U, XV-Z17000, XV-Z17000U and XV-Z18000. Choose it over the bare bulb if the housing in your projector has become worn or discoloured.\u003c\/p\u003e\u003cp\u003eNo alternative part numbers are recorded for this lamp beyond AN-K15LP itself, and watts and hours remain unpublished for this model, so watch for picture dimming as the practical sign it is time to replace rather than relying on a lamp-hour countdown.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10276\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 6 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this module fit the original XV-Z15000 as well as the later XV-Z18000?\u003c\/strong\u003e\u003cbr\u003eYes, this module is listed for all six models in the range, from the original XV-Z15000 through to the XV-Z18000, so the generation gap does not change which part to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included in this module that isn't in the bare-bulb listing?\u003c\/strong\u003e\u003cbr\u003eThis version includes a new housing built around the bulb, whereas the bare listing is the bulb alone for reuse in your existing housing, worth choosing if that housing still looks sound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow will I know it's time to replace this lamp if there's no published hour rating?\u003c\/strong\u003e\u003cbr\u003eWatch for the picture growing noticeably dimmer, colours shifting, or an on-screen lamp warning from the projector itself, since no fixed hours figure is published for this model to count down against.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the fitting process different for a module compared with a bare bulb?\u003c\/strong\u003e\u003cbr\u003eYes, a module is removed and replaced as one complete unit, whereas a bare bulb involves opening the existing housing and swapping just the bulb inside it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the XV-Z15000A and XV-Z15000U different lamps from the standard XV-Z15000?\u003c\/strong\u003e\u003cbr\u003eNo, all three share this same AN-K15LP module, so the regional or revision suffix on your projector does not change which lamp to order, whether you choose the bare bulb or this module.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182638117100,"sku":"LA-10276","price":174.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/21395-xl.png?v=1786956915"},{"product_id":"an-mb60lp-projector-lamp-module","title":"AN-MB60LP projector lamp with module","description":"\u003cp\u003eAN-MB60LP fits five closely related Sharp projectors: the PG-M60X, PG-M60XA, PG-MB60X, XG-M60X and XG-MB60X, models built for meeting rooms and small venues. It is supplied as a complete module, so the bulb arrives already seated in its housing, ready to be fitted as a single replacement unit.\u003c\/p\u003e\u003cp\u003eNo alternative part numbers are recorded for AN-MB60LP, and no wattage or lamp-life figures are published for this model, so treat the projector's own lamp warning as the practical signal to order a replacement. The PG and XG naming reflects two labels Sharp used for what is otherwise the same projector platform.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10244\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between the PG-M60X and XG-M60X naming?\u003c\/strong\u003e\u003cbr\u003eThese are two labels Sharp applied to the same underlying projector platform, so both use the identical AN-MB60LP module regardless of which prefix appears on your unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit the PG-M60XA as well as the standard PG-M60X?\u003c\/strong\u003e\u003cbr\u003eYes, the PG-M60XA is included among the five compatible models, alongside the PG-M60X, PG-MB60X, XG-M60X and XG-MB60X, all of which use this same lamp module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I find the power spec the AN-MB60LP module listing leaves out?\u003c\/strong\u003e\u003cbr\u003eThat specification is not published for this model, so it has been left out rather than estimated. Check your projector's own documentation if you need that figure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp sold as a bare bulb anywhere?\u003c\/strong\u003e\u003cbr\u003eNot currently. Only the complete module is listed for the PG-M60X and XG-MB60X range, so this is the fitting option available for these projectors, with no separate bare-bulb listing on record.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I do before fitting the new module into a meeting-room projector?\u003c\/strong\u003e\u003cbr\u003eSwitch the unit off and let it cool fully, since meeting-room projectors are often used back-to-back through the day and the lamp compartment can stay hot for longer than expected after use.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182638903532,"sku":"LA-10244","price":151.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25268-xl.png?v=1786958338"},{"product_id":"003-120117-01-projector-lamp","title":"003-120117-01 bare projector lamp","description":"\u003cp\u003e003-120117-01 is a bare lamp fitted across nine Christie models, including the DS 4K, DS+5K, DS+6K, DW3K, DW3Kc, Matrix 4000, Mirage HD6, Mirage S+4K and Mirage W6, and it also fits the Sharp BQC-XGNV51XE1. Supplied bare, it is the bulb only, without a housing or cage, and no wattage or lamp-life figure is published for it.\u003c\/p\u003e\u003cp\u003eSharp's own reference for this identical bulb is 03-000833-01P, so if that code appears on your BQC-XGNV51XE1 documentation, it is the same part listed here as 003-120117-01. Since this is a bare lamp, it fits inside the housing already present in your Christie or Sharp projector, so confirm that housing is sound before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11236\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does a Sharp projector share a Christie lamp code?\u003c\/strong\u003e\u003cbr\u003eSharp's BQC-XGNV51XE1 uses the same underlying bulb as several Christie large-venue models, so 003-120117-01 and Sharp's own 03-000833-01P describe one identical lamp shared across both brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bulb fit the Christie Mirage HD6?\u003c\/strong\u003e\u003cbr\u003eYes, the Mirage HD6 is one of nine Christie models, alongside the DS 4K, DW3K and Matrix 4000 among others, that all take this bare lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat exactly do I receive when I order 003-120117-01?\u003c\/strong\u003e\u003cbr\u003eJust the bare bulb itself, without any housing or cage, intended to be fitted inside the housing already installed in your Christie or Sharp projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a wattage figure available anywhere for the 003-120117-01?\u003c\/strong\u003e\u003cbr\u003eNot in the documentation available to us. We have not been able to confirm a wattage figure for 003-120117-01 from Christie or Sharp, so it is omitted from this listing rather than estimated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between the Christie DS+5K and DS+6K?\u003c\/strong\u003e\u003cbr\u003eThese are distinct models within Christie's DS+ line with different brightness ratings, but both share the same 003-120117-01 lamp despite the different model numbers on their rating plates.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182639100140,"sku":"LA-11236","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"an-lx20lp-projector-lamp-module","title":"AN-LX20LP Projector Lamp with Module","description":"\u003cp\u003eThis AN-LX20LP lamp module fits twelve Sharp projectors across three families: the PG-LS2000, PG-LW2000 and PG-LX2000 trio, the XG-E200 range including the E2610XA and E2830XA, and the XR-E2500 pair. It arrives as a complete unit, with the bulb already seated in its housing, ready to slot straight into the projector.\u003c\/p\u003e\u003cp\u003eBecause this is the module version, you replace both the bulb and its housing in one go, which is worth doing if the old housing has become brittle or discoloured. Sharp lists this part simply as AN-LX20LP, with no separate alternate code, so check your exact projector model against the twelve listed here before ordering, since several Sharp model numbers in this range look similar at a glance.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10240\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 12 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the AN-LX20LP fit both the PG-LX2000 and the XG-E2610XA?\u003c\/strong\u003e\u003cbr\u003eYes. The PG-LS2000, PG-LW2000 and PG-LX2000 share this lamp with the wider XG-E200 and XR-E2500 series, so one AN-LX20LP module covers all twelve projectors listed for this product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this lamp in the XR-E2510SA if I usually see it listed for the XR-E2530SA?\u003c\/strong\u003e\u003cbr\u003eYes, the XR-E2510SA and XR-E2530SA share the AN-LX20LP lamp, along with ten other Sharp PG and XG models in this range, so the same module suits either machine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is there no separate part number for the module version?\u003c\/strong\u003e\u003cbr\u003eSharp uses the single code AN-LX20LP for this lamp regardless of whether it is bought bare or as a complete module, so the code alone will not tell you which version you're ordering; check the listing title.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp suitable for a fixed installation in a lecture hall?\u003c\/strong\u003e\u003cbr\u003eThe AN-LX20LP module fits Sharp's PG-LS2000, PG-LW2000 and PG-LX2000 projectors as well as the XG-E and XR-E ranges, all commonly used in classrooms and lecture halls, and the module format suits infrequent, planned replacement in that kind of fixed setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I let the projector cool before fitting this lamp module?\u003c\/strong\u003e\u003cbr\u003eYes. Allow the Sharp projector to cool fully and unplug it before removing the old module, since projector lamps run hot and can be fragile under pressure while still warm.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182639526124,"sku":"LA-10240","price":153.17,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/29024-xl.png?v=1786959187"},{"product_id":"an-xr20l2-projector-lamp","title":"AN-XR20L2 Bare Projector Lamp","description":"\u003cp\u003eFifteen Sharp projectors share the AN-XR20L2 lamp, from the PG-MB55 and PG-MB65 families through to the XG-9180X and the XG-MB55X-L to XG-MB67X-L line. Rated at 275 watts with a 2000-hour life, it is sold bare, meaning the bulb only, for fitting into your existing housing rather than replacing the cage itself.\u003c\/p\u003e\u003cp\u003eBecause this is the bare version, you will need to transfer the new bulb into your current housing rather than fit a sealed unit, so check that your existing cage is still in good condition before ordering. AN-XR20L2 is the only code Sharp uses for this lamp, so all fifteen PG-MB and XG-MB models listed here take the identical part.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10245\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 15 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the AN-XR20L2 lamp run at 275 watts in every projector on this list?\u003c\/strong\u003e\u003cbr\u003eThe 275-watt rating and 2000-hour life belong to the AN-XR20L2 lamp itself, and it is the correct part for all fifteen PG-MB and XG-MB models listed, from the PG-MB55 up to the PG-MB67XA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the XG-9180X lamp the same as the one used in the PG-MB65X?\u003c\/strong\u003e\u003cbr\u003eYes. The XG-9180X shares the AN-XR20L2 lamp with the PG-MB and XG-MB series listed here, so the same bare 275-watt bulb, rated for 2000 hours, fits either projector without any adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any special tools to fit a bare lamp like this one?\u003c\/strong\u003e\u003cbr\u003eA bare lamp fits into your existing housing, usually secured with a couple of small screws, so a screwdriver is normally all that is needed; check your Sharp projector's manual for the exact housing release steps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a practical difference between the PG-MB67X and PG-MB67XA?\u003c\/strong\u003e\u003cbr\u003eWe can't speak to Sharp's internal model changes between the two, but both the PG-MB67X and PG-MB67XA are listed as compatible with the AN-XR20L2 lamp, so the same bare bulb suits both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should the AN-XR20L2 lamp last before it needs replacing?\u003c\/strong\u003e\u003cbr\u003eThis lamp carries a 2000-hour rated life at 275 watts; once your Sharp projector's lamp-hour counter approaches that figure, or picture brightness noticeably drops, it is a sensible time to plan a replacement.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182640214252,"sku":"LA-10245","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"an-mb60lp-projector-lamp","title":"AN-MB60LP Bare Projector Lamp","description":"\u003cp\u003eFive closely related Sharp models take the AN-MB60LP lamp: the PG-M60X and PG-M60XA, the PG-MB60X, and their XG-badged counterparts, the XG-M60X and XG-MB60X. No wattage or lamp-life figures are published for this part, so fit it as a like-for-like bulb swap into your current housing rather than relying on a stated rating.\u003c\/p\u003e\u003cp\u003eSince this lamp is sold bare, the bulb needs transferring into your existing housing before it goes back into the projector, so inspect the housing for cracks or a loose cage before reusing it. AN-MB60LP is the single code Sharp uses across all five compatible models, so there is nothing further to check once you have confirmed your projector is on that list.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10243\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the AN-MB60LP lamp the same across the M60X and MB60X model names?\u003c\/strong\u003e\u003cbr\u003eYes. The PG-M60X, PG-M60XA, PG-MB60X, XG-M60X and XG-MB60X all use the AN-MB60LP lamp, so the change from M60X to MB60X in the model name does not affect which part you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy doesn't the listing show a wattage for this lamp?\u003c\/strong\u003e\u003cbr\u003eSharp has not published a wattage or lamp-life figure for the AN-MB60LP, so we list only what is confirmed rather than guess at a number; compatibility with your PG or XG model is unaffected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I fit the AN-MB60LP myself without calling a technician?\u003c\/strong\u003e\u003cbr\u003eMost Sharp PG and XG projectors in this range use an accessible lamp door, so fitting a bare replacement is usually a task you can do yourself with a screwdriver; check your specific manual for the release mechanism.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PG-M60XA an updated version of the PG-M60X?\u003c\/strong\u003e\u003cbr\u003eWe list both the PG-M60X and PG-M60XA as compatible with the AN-MB60LP lamp; whatever the difference between the two model suffixes, the lamp part required is identical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith no hours figure for the AN-MB60LP, how do I judge replacement time?\u003c\/strong\u003e\u003cbr\u003eWithout a published hour rating for the AN-MB60LP, the clearest signs are a dimmer image, a flickering picture, or a lamp warning light on your Sharp PG or XG projector.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182641000684,"sku":"LA-10243","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"an-d350lp-projector-lamp-module","title":"AN-D350LP Projector Lamp with Module","description":"\u003cp\u003eAN-D350LP is the lamp behind Sharp's D-series line, covering thirty-one projectors from the PG-D2500X and PG-D3010X to the XG-D3080XA and the older XR-50X and XR-N855XA. At 210 watts with a 2000-hour rated life, it is supplied as a complete module, bulb and housing together, ready to drop straight into any of these machines.\u003c\/p\u003e\u003cp\u003eSharp also lists this part as AN-D350LP\/1, an equivalent alternate code for the same lamp, so either reference should get you the correct product. With thirty-one compatible projectors spanning the D2500, D2700, D3000, D3500 and XR ranges, it is worth confirming your exact model number against the list before ordering, since several D-series units differ only by their final digit.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 210 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10213\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 31 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes AN-D350LP and AN-D350LP\/1 refer to the same lamp?\u003c\/strong\u003e\u003cbr\u003eYes. AN-D350LP\/1 is an alternate code Sharp uses for the identical AN-D350LP lamp, so you can order under either reference and receive the same 210-watt, 2000-hour module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this lamp fit the older XR-50X and XR-55X models as well as the newer D-series?\u003c\/strong\u003e\u003cbr\u003eYes, the XR-50X, XR-50S, XR-55X and XR-55XL are all listed alongside the newer PG-D and XG-D projectors as compatible with the AN-D350LP module, which runs at 210 watts with a 2000-hour rated life across the whole range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I tell the PG-D3010X and PG-D3010XL apart when ordering?\u003c\/strong\u003e\u003cbr\u003eBoth the PG-D3010X and PG-D3010XL take the AN-D350LP lamp, so the X versus XL suffix does not change the part you need for this projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp suitable for a permanently mounted classroom or hall projector?\u003c\/strong\u003e\u003cbr\u003eWith thirty-one supported models across Sharp's D-series and XR ranges, this is one of the more widely used lamps in fixed installations such as classrooms and lecture halls, and the module format suits planned rather than emergency replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 2000-hour rating actually tell me?\u003c\/strong\u003e\u003cbr\u003eIt is Sharp's stated lamp life at 210 watts for the AN-D350LP; once your projector's lamp-hour counter nears that figure, expect the picture to dim, and plan a replacement.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182641819884,"sku":"LA-10213","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34544-xl.png?v=1786964290"},{"product_id":"an-z90lp-projector-lamp-module","title":"AN-Z90LP Projector Lamp with Module","description":"\u003cp\u003eSharp's XV-Z90 and XV-Z91 home cinema projectors, along with their DT-200 and DT0200 badge variants, all share the AN-Z90LP lamp. No wattage or lamp-life figure is published for this part, so treat the eight listed model numbers, rather than a stated rating, as your guide to whether it fits your projector.\u003c\/p\u003e\u003cp\u003eThis lamp is also sold under the code BQC-XVZ90++1, an alternate reference for the same AN-Z90LP unit, so either part number should bring up the correct listing. It ships as a complete module rather than a bare bulb, so no transfer into an existing housing is needed; the whole unit is fitted as one piece.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10214\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the DT-200 the same projector as the XV-Z90?\u003c\/strong\u003e\u003cbr\u003eThe DT-200 and DT0200 are alternate model names Sharp used for machines that take the same AN-Z90LP lamp as the XV-Z90 and XV-Z91, so compatibility is unaffected by which name appears on your unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this lamp have two different part codes?\u003c\/strong\u003e\u003cbr\u003eSharp has sold this lamp as both AN-Z90LP and BQC-XVZ90++1 over time; they refer to the same module, so ordering under either code gets you the correct part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the XV-Z91U need a different lamp from the XV-Z90U?\u003c\/strong\u003e\u003cbr\u003eNo, both the XV-Z90U and XV-Z91U are listed as compatible with the AN-Z90LP module, so the U-suffix models share the same lamp as the rest of the Z90 and Z91 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp suited to a home cinema projector used mainly in the evening?\u003c\/strong\u003e\u003cbr\u003eThe XV-Z90 and XV-Z91 series were built as home cinema projectors, and the AN-Z90LP module is the factory-fit replacement lamp for that use, whether the projector runs occasionally or most evenings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before fitting this module myself?\u003c\/strong\u003e\u003cbr\u003eConfirm your projector shows one of the eight listed model numbers, then let the unit cool and unplug it before opening the lamp door, since the module sits close to the optics and should be handled gently.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182642508012,"sku":"LA-10214","price":187.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27621-xl.png?v=1786959015"}],"url":"https:\/\/www.lampsauthority.com\/collections\/sharp-projector-lamps.oembed","provider":"Lamps Authority","version":"1.0","type":"link"}