{"title":"Sanyo projector lamps","description":"\u003cp\u003eReplacement projector lamps for Sanyo projectors — 168 lamps catalogued. Available as bare lamps (the bulb alone, fitted into the housing already in your projector) and as complete modules (bulb and housing together, ready to drop straight in).\u003c\/p\u003e\u003cp\u003eEvery lamp carries a genuine Philips, Osram or Ushio burner, ships free worldwide, and is covered by a 180-day guarantee. If you are not sure which your projector takes, check the code on the old lamp or send us a photo of the label.\u003c\/p\u003e","products":[{"product_id":"poa-lmp137-projector-lamp","title":"POA-LMP137 bare projector lamp","description":"\u003cp\u003eTwenty-one projectors across three brands - Christie, Eiki and Sanyo - share this one bulb, listed as POA-LMP137. It covers the Christie LX505, the Eiki LC-XL100 family and a wide run of Sanyo PLC-XM and PLC-WM models. Rated at 275W, it is supplied bare, so it is built to sit inside your existing housing rather than replace it.\u003c\/p\u003e\u003cp\u003eSanyo lists the identical bulb under ET-SLMP137, and you will also see it referenced as 003-120531-01 or 610-347-5158 depending on which brand's documentation you are reading - all four codes point to the same 275W bulb. Because this is a bare lamp, keep your current housing and reflector; only the bulb itself needs replacing. No photograph is available for this listing, so refer to the compatibility list to confirm fit.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08673\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 21 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo models use the POA-LMP137?\u003c\/strong\u003e\u003cbr\u003eSanyo's own part number for this bulb is ET-SLMP137, and it fits models across the PLC-XM100, PLC-WM4500 and PLC-XM80 ranges, among others. Check your Sanyo projector's model plate against the full compatibility list before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is this lamp supplied without a housing?\u003c\/strong\u003e\u003cbr\u003ePOA-LMP137 is a bare bulb, meaning it is designed to be fitted into the housing that is already inside your projector. This keeps cost down where the existing housing and reflector are still in good condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wattage of this bulb?\u003c\/strong\u003e\u003cbr\u003eThis bulb is rated at 275W. A specific lamp life figure is not available in our records for this part, so we have left it blank rather than publish a number we cannot confirm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are there no photos for this listing?\u003c\/strong\u003e\u003cbr\u003eNo manufacturer photograph exists for the POA-LMP137 in our system, so a generic placeholder image is used instead. The specification and compatibility details above are accurate regardless of the image shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many projector models does this lamp fit?\u003c\/strong\u003e\u003cbr\u003ePOA-LMP137 is listed against 21 projector models spanning Christie, Eiki and Sanyo, making it one of the more broadly compatible bare bulbs in our catalogue. Confirm your exact model against the list above before ordering.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182567305452,"sku":"LA-08673","price":178.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"610-287-5386-projector-lamp","title":"610-287-5386 bare projector lamp","description":"\u003cp\u003e610-287-5386 is a bare replacement lamp for two closely related projectors, the Eiki LC-VM1 and the Sanyo PLV-30. Sanyo also lists this same bulb under the code POA-LMP25. Wattage and rated hours are not published for this lamp, so we cannot state figures here, only that it is the correct bare bulb for both models.\u003c\/p\u003e\u003cp\u003eThere is also a module version of this lamp, sold under the code POA-LMP25, which pairs the same bulb with a new housing. Since no wattage or lamp-life figures are listed for either version, use the part code on your existing bulb or the sticker inside your LC-VM1 or PLV-30 to confirm you are ordering the right one.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08930\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy are no watts or hours listed for this lamp?\u003c\/strong\u003e\u003cbr\u003eThat information is not published for 610-287-5386, so rather than guess, we leave it out. The compatibility with the Eiki LC-VM1 and Sanyo PLV-30 is confirmed, and that is the detail you can rely on when ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 610-287-5386 the same lamp as POA-LMP25?\u003c\/strong\u003e\u003cbr\u003eYes, POA-LMP25 is the module version of the identical bulb, packaged with a new housing. 610-287-5386 is the bare bulb on its own, for fitting into your existing LC-VM1 or PLV-30 housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this lamp in a Sanyo projector even though it is also listed as an Eiki part?\u003c\/strong\u003e\u003cbr\u003eYes, the Eiki LC-VM1 and Sanyo PLV-30 are closely related projectors that share the same lamp, so 610-287-5386 fits either one regardless of which brand's logo is on the case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before fitting a bare lamp with no published wattage?\u003c\/strong\u003e\u003cbr\u003eMatch the physical shape of the old bulb and its base connector against the new one, and confirm the part code matches 610-287-5386 or POA-LMP25 exactly, since visual similarity alone is not a reliable guide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I handle this lamp safely during replacement?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool down fully before opening the lamp bay, and avoid pressing on the glass envelope. Hold the lamp by its base, and keep it upright until it is seated in the housing.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182568124652,"sku":"LA-08930","price":144.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"poa-lmp68-projector-lamp-module","title":"POA-LMP68 projector lamp with module","description":"\u003cp\u003eAcross Eiki and Sanyo, eighteen projectors share the 300-watt, 2000-hour lamp module POA-LMP68, including the LC-SE10, LC-XE10, PLC-XC10 and PLC-SU60, among several others in each brand's line-up. Sanyo also lists the identical part as 610-308-1786, so any of the three codes leads to the same lamp.\u003c\/p\u003e\u003cp\u003eWith so many compatible models, from the Eiki DLP-380N to the Sanyo PLC-XU60, the safest way to order is by matching POA-LMP68 or 610-308-1786 against the label on your old lamp rather than the projector name alone, since several PLC-XC and PLC-SC models look similar but use different lamps. This is the module version; a bare-lamp equivalent is not listed separately for this code.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 300 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08929\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 18 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does POA-LMP68 have both a space and hyphen version of the same code?\u003c\/strong\u003e\u003cbr\u003e610 308 1786 and 610-308-1786 are the same Sanyo part code written two different ways; formatting varies between documentation and packaging, but both refer to the identical lamp as POA-LMP68.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo models use the POA-LMP68 lamp?\u003c\/strong\u003e\u003cbr\u003eIt covers the DLP-380N, ET-SLMP68, LMP68, PLC-3600, PLC-SC10, PLC-SU60, PLC-XC10, PLC-XC10S, PLC-XC3600 and PLC-XU60. If your Sanyo model is not on this list, check the code on your existing bulb before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the burner for the POA-LMP68?\u003c\/strong\u003e\u003cbr\u003eWe do not currently list a bare version of POA-LMP68 on its own; it is sold as the complete module with housing. If your existing housing is intact, keep it as a spare once the new module is fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated life of POA-LMP68?\u003c\/strong\u003e\u003cbr\u003e300 watts and 2000 hours is the rating for this lamp. Because it covers such a wide range of Eiki and Sanyo models, actual brightness and lifespan can vary slightly depending on which projector it is fitted into.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my Eiki LC-XE10 needs this exact module?\u003c\/strong\u003e\u003cbr\u003eCheck the sticker inside the lamp compartment or on the base of your current bulb. If it shows POA-LMP68, LMP68 or 610-308-1786, this module is the correct match for your LC-XE10 or LC-XE10D.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182568812780,"sku":"LA-08929","price":163.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28511-xl.png?v=1786959126"},{"product_id":"lmp116-projector-lamp-module","title":"LMP116 projector lamp module","description":"\u003cp\u003eLMP116 replaces the lamp inside fifteen listed Christie, Eiki and Sanyo models, from the Christie LX500 through Eiki's LC-SXG400 and LC-XG400 ranges to Sanyo's PLC-XT35 and PLC-XT3500 family. It is rated at 330W with a 2000-hour lamp life and supplied as a full module, so the housing arrives fitted around the bulb rather than sold on its own.\u003c\/p\u003e\u003cp\u003eSanyo's own reference for this bulb is POA-LMP116, and you may also see it written as 003-120377-01 or as 610 335 8093 (sometimes printed 610-335-8093) depending on the brand's paperwork. All of these describe the same LMP116 module. Because it is a full module, no separate housing purchase is needed - the whole assembly is replaced as one unit during a service.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08672\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 15 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sanyo's part number for LMP116?\u003c\/strong\u003e\u003cbr\u003eSanyo references this same lamp as POA-LMP116. Christie and Eiki paperwork may instead show 003-120377-01 or 610-335-8093 - all of these numbers describe the identical 330W module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Eiki projectors take this lamp?\u003c\/strong\u003e\u003cbr\u003eLMP116 fits the Eiki LC-SXG400, LC-SXG400D, LC-SXG400L, LC-XG400, LC-XG400D and LC-XG400L models. Check your Eiki projector's model plate carefully against this list before placing an order, since several of these model names are easy to mix up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated lamp life of LMP116?\u003c\/strong\u003e\u003cbr\u003eLMP116 carries a manufacturer-rated life of 2000 hours at 330W. Actual usable life depends on how the projector is used and maintained, so treat 2000 hours as a guide rather than a guarantee.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes LMP116 need a separate housing?\u003c\/strong\u003e\u003cbr\u003eNo separate housing is required - LMP116 is sold as a complete module with the bulb already fitted inside its housing, ready to install as one unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my projector needs LMP116 specifically?\u003c\/strong\u003e\u003cbr\u003eMatch your projector model against the compatibility list above, or check the code printed on your existing lamp module against LMP116, POA-LMP116, 003-120377-01 or 610-335-8093. Any of these confirms the same part.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182569238764,"sku":"LA-08672","price":148.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34007-xl.png?v=1786962603"},{"product_id":"610-352-7949-projector-lamp","title":"610-352-7949 bare projector lamp","description":"\u003cp\u003eEight projectors split evenly between Eiki and Sanyo take the 610-352-7949 bare lamp, covering the Eiki LC-WB200, LC-WB200A, LC-XB250 and LC-XB250A alongside Sanyo's LP-XU4000, PLC-XU4000, PLC-XU4010C and PLC-XU4050C. Sanyo also lists this bulb under the code POA-LMP148. Wattage and rated hours are not published, so neither figure appears here.\u003c\/p\u003e\u003cp\u003eBecause the LC-WB200 and LC-XB250 ranges look alike from the outside, confirm your projector using the model badge or the code on the old bulb rather than guessing from appearance. This is a bare lamp, so your existing housing stays in place, and POA-LMP148 is simply another name for the identical 610-352-7949 part.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08934\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes 610-352-7949 fit both Eiki and Sanyo models?\u003c\/strong\u003e\u003cbr\u003eYes, it covers the Eiki LC-WB200, LC-WB200A, LC-XB250 and LC-XB250A, as well as Sanyo's LP-XU4000, PLC-XU4000, PLC-XU4010C and PLC-XU4050C. Confirm your exact model suffix before ordering, since the WB and XB ranges share very similar bodies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is no wattage figure shown for this lamp?\u003c\/strong\u003e\u003cbr\u003e610-352-7949 does not have a published wattage or rated-hours figure in our records, so we leave both out rather than estimate. Compatibility with the listed Eiki and Sanyo models is confirmed and is the detail you can rely on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs POA-LMP148 a separate lamp from 610-352-7949?\u003c\/strong\u003e\u003cbr\u003eNo, POA-LMP148 is simply Sanyo's code for the identical bulb sold under 610-352-7949 by Eiki. Either number describes the same part, so use whichever one is printed on your existing lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the best way to confirm fit before ordering?\u003c\/strong\u003e\u003cbr\u003eRemove the old lamp if you can do so safely and read the code printed on its base or label, then match it against 610-352-7949 or POA-LMP148 rather than relying on the projector's outward appearance alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace the housing along with the bulb?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare lamp, meaning the bulb and reflector only. Your current housing, cage and connector are reused, and the new burner is fitted into that existing housing during replacement.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182570254572,"sku":"LA-08934","price":144.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32048-lg.png?v=1786959663"},{"product_id":"610-343-2069-projector-lamp-module","title":"610 343 2069 projector lamp with module","description":"\u003cp\u003eThirty-four projectors across the Eiki LC-WB100, LC-XB100 and LC-XB200 families and Sanyo's PLC-XU300 and PLC-WXU300 ranges share this 225-watt, 2500-hour lamp module, 610 343 2069. The same part is also written as 610-343-2069 or listed as POA-LMP131, and this listing is the complete module, housing included.\u003c\/p\u003e\u003cp\u003eWith such a wide compatibility list, spanning everything from the compact LC-XB100 to larger Sanyo PLC-XWU300 installations, the safest check is always the code on your existing bulb rather than the projector model alone, since several PLC-XU300 and PLC-XU350 variants look almost identical. A bare-lamp version without housing, POA-LMP131, is sold separately for projectors with an undamaged housing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 225 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08933\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 34 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many projectors does 610 343 2069 fit?\u003c\/strong\u003e\u003cbr\u003eThirty-four in total, split across Eiki's LC-WB and LC-XB ranges and a wide set of Sanyo PLC-XU, PLC-WXU and PLC-XWU models. Given the scale of the list, checking the code on your old lamp is quicker than searching the full projector list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this lamp appear under three different codes?\u003c\/strong\u003e\u003cbr\u003e610 343 2069, 610-343-2069 and POA-LMP131 all describe the same lamp; the number is Sanyo's internal code written with and without spaces, while POA-LMP131 is the customer-facing part number. Any of the three will match this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this module and the bare POA-LMP131 lamp?\u003c\/strong\u003e\u003cbr\u003eThis listing, 610 343 2069, is the complete module with a new housing. POA-LMP131 is the identical bulb sold without housing, for projectors whose existing cage and connector are still undamaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this lamp work in a Sanyo PLC-XU355?\u003c\/strong\u003e\u003cbr\u003eYes, the PLC-XU355, PLC-XU355A and PLC-XU355K are all listed against this part, along with the wider PLC-XU300 and PLC-XU350 families. Confirm your exact suffix on the projector's rating label before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the specs of 610 343 2069 consistent across all thirty-four models?\u003c\/strong\u003e\u003cbr\u003eYes — 225 watts, with a rated life of 2500 hours. That figure applies across all thirty-four listed projectors, though actual bulb life still depends on how each unit is used day to day.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182571041004,"sku":"LA-08933","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20689-xl.png?v=1786955724"},{"product_id":"610-290-8985-projector-lamp","title":"610-290-8985 bare projector lamp","description":"\u003cp\u003eWith 37 compatible projectors, 610-290-8985 is one of the more widely shared lamps in our range, rated at 150 watts for 2,000 hours. It covers Sanyo's PLC-SU and PLC-XU series, Canon's LV-7320 and LV-7325, Eiki's LC-NB and LC-XNB2 ranges, three Proxima Ultralight models and the Boxlight CP-11T, CP-13T and CP-33T.\u003c\/p\u003e\u003cp\u003eThis lamp has passed through several rebrands, so you may see it as 610-280-6939, 6102908985, CP13T-930, LAMP-019, LV-LP05, POA-LMP21 or POA-LMP33 depending on which manufacturer's label is on your machine; all of these refer to the same bare bulb. Since no housing is included, it fits back inside your projector's existing lamp cage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08494\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 37 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis lamp has so many codes, how do I know they all match?\u003c\/strong\u003e\u003cbr\u003e610-290-8985 was sold under different numbers by Sanyo, Canon, Eiki and Proxima as they rebadged the same underlying design, so 610-280-6939, LAMP-019, LV-LP05, POA-LMP21 and POA-LMP33 are all the same part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy Sanyo projector isn't in the list, could it still take this lamp?\u003c\/strong\u003e\u003cbr\u003eOnly the Sanyo models shown in the compatibility list, such as the PLC-SU20 and PLC-XU22 ranges, are confirmed to use this lamp; a similarly named model outside that list may need a different part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete module or just the bulb?\u003c\/strong\u003e\u003cbr\u003e610-290-8985 is a bare lamp, supplied without housing, so it is intended to be fitted inside the lamp cage already built into your Sanyo, Canon, Eiki or Proxima projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does buying an 'original' lamp mean here?\u003c\/strong\u003e\u003cbr\u003eIt means the bulb itself is the same type originally specified for these projectors, rather than a generic substitute; the part numbers listed match what the projector manufacturers issued for this lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow urgent is it to replace a lamp once it dims?\u003c\/strong\u003e\u003cbr\u003eA dimming lamp will usually keep working for a while longer, but image quality and brightness drop steadily, so most people replace it once the projector reports the lamp is near the end of its rated hours.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182571696364,"sku":"LA-08494","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"poa-lmp131-projector-lamp","title":"POA-LMP131 bare projector lamp","description":"\u003cp\u003ePOA-LMP131 is the bare-lamp equivalent of the 610-343-2069 module, rated the same at 225 watts and 2500 hours, and fitted across thirty-one Eiki and Sanyo projectors including the LC-XB200 and the wide PLC-XU300 and PLC-XU350 families. Because it ships without housing, it is meant for projectors whose existing cage and connector are still sound.\u003c\/p\u003e\u003cp\u003eIf your housing shows cracks, worn locating pins or a damaged connector, the housed module version, 610-343-2069, replaces the whole assembly instead. Given how many Sanyo PLC-XU300 and PLC-XU350 variants exist, always check the code on your current bulb before ordering, since model suffixes such as A, C and K mark genuinely different parts.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 225 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08932\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 31 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does POA-LMP131 not include compared to 610-343-2069?\u003c\/strong\u003e\u003cbr\u003ePOA-LMP131 is the bare bulb only, without the housing, cage and connector that come with the 610-343-2069 module. You reuse your existing housing and fit the new burner into it directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo PLC-XU models take this lamp?\u003c\/strong\u003e\u003cbr\u003ePLC-XU300, PLC-XU301, PLC-XU305, PLC-XU310C, PLC-XU350, PLC-XU351C and PLC-XU355, along with their A, C and K variants, all use POA-LMP131. Check the exact suffix on your projector's label, since it changes which lamp is correct.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do the suffix letters on Sanyo models affect which lamp I need?\u003c\/strong\u003e\u003cbr\u003eLetters such as A, C and K generally mark manufacturing or regional variants of the same base model, and in this case they all still take POA-LMP131, but it is worth confirming against your old bulb's code regardless.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs POA-LMP131 rated for the same lamp life as the module version?\u003c\/strong\u003e\u003cbr\u003eYes, both the bare lamp and the housed module share the same 225-watt, 2500-hour rating, since the bulb inside is identical. The only difference is whether a new housing is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I inspect on my existing housing before choosing the bare version?\u003c\/strong\u003e\u003cbr\u003eLook for cracks in the plastic, bent or missing locating pins, and a connector that seats firmly without wobbling. If all three look sound, the bare POA-LMP131 lamp is the right choice.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182571794668,"sku":"LA-08932","price":151.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"poa-lmp25-projector-lamp-module","title":"POA-LMP25 projector lamp with module","description":"\u003cp\u003ePOA-LMP25 is the complete lamp module for the Eiki LC-VM1 and Sanyo PLV-30, pairing the bulb with a new housing rather than reusing the one fitted to your projector. Sanyo also records this lamp as 610-287-5386. Wattage and lamp-life figures are not published for this part, so no numbers are stated here.\u003c\/p\u003e\u003cp\u003eBecause this lamp fits only two closely related projectors, ordering is simple: match POA-LMP25 or 610-287-5386 against the label inside your LC-VM1 or PLV-30 before you buy. If your existing housing is still in good condition, a bare-lamp version without the new housing is available separately at a lower price.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08931\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the POA-LMP25 module?\u003c\/strong\u003e\u003cbr\u003eA new bulb together with a new housing and connector, replacing the whole lamp assembly inside the LC-VM1 or PLV-30 in one piece, rather than just the burner on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a cheaper bare-lamp option for this projector?\u003c\/strong\u003e\u003cbr\u003eYes, the same bulb is sold separately as 610-287-5386 without the housing, for projectors where the existing cage and connector are undamaged. It costs less since you are not paying for new housing hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are no wattage or hour figures listed for POA-LMP25?\u003c\/strong\u003e\u003cbr\u003eThis lamp does not have published wattage or rated-hours figures in our records, so we have left both out rather than provide a number we cannot confirm. Compatibility with the LC-VM1 and PLV-30 is confirmed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes POA-LMP25 fit any Sanyo model besides the PLV-30?\u003c\/strong\u003e\u003cbr\u003eNo, the PLV-30 is the only Sanyo model listed against this lamp, alongside the Eiki LC-VM1. If you own a different Sanyo projector, check its lamp compartment for a separate part code.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit a complete lamp module safely?\u003c\/strong\u003e\u003cbr\u003ePower down and unplug the projector first, and let it cool before opening the lamp bay. The module should slide out and back in without force; if it resists, check the release catch rather than pulling harder.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182572515564,"sku":"LA-08931","price":58.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26703-xl.png?v=1786958804"},{"product_id":"610-287-5379-projector-lamp","title":"610-287-5379 bare projector lamp","description":"\u003cp\u003eNineteen projectors across five brands share the 610-287-5379 lamp, a 120-watt bulb rated at 2,000 hours. It fits Sanyo's PLC-SU07, PLC-SU10 and PLC-SU15 ranges, Canon's LV-5300 and LV-5300E, the Eiki LC-NB1 family, the Proxima UltraLight LS1, and the Boxlight CP-10T, CP-7T and CP-X10T.\u003c\/p\u003e\u003cp\u003eDepending on which brand's label is on your projector, this lamp may be marked CP10T-930, LV-LP01, LV-LP07 or POA-LMP27 rather than 610-287-5379, but all four are the same bare bulb. It has no housing of its own, so it is fitted into the lamp cage already inside your Sanyo, Canon, Eiki, Proxima or Boxlight machine.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08492\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 19 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eI have a Canon projector, will this really be the same lamp as the Sanyo version?\u003c\/strong\u003e\u003cbr\u003eYes, Canon's LV-5300 and LV-5300E share their internal design with the listed Sanyo, Eiki, Proxima and Boxlight models, so 610-287-5379 fits all of them despite the different branding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the code on my old lamp read LV-LP01 instead of 610-287-5379?\u003c\/strong\u003e\u003cbr\u003eCanon used LV-LP01 as its own code for this lamp, while Sanyo and others used 610-287-5379, CP10T-930, LV-LP07 or POA-LMP27; they are all the same bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a housing part of this order?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare lamp, so the housing already fitted inside your projector stays in place and only the bulb itself is replaced when you fit this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the safest way to remove the old lamp?\u003c\/strong\u003e\u003cbr\u003eSwitch the projector off and leave it to cool before opening the lamp compartment, then handle the old and new lamps by their base or frame rather than the glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I make sure the replacement will actually fit?\u003c\/strong\u003e\u003cbr\u003eMatch the code on your existing lamp against 610-287-5379 or its alternatives, and check your exact projector model, such as PLC-SU10 rather than a similarly numbered Sanyo model, against the list above.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182573924588,"sku":"LA-08492","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/31984-lg.png?v=1786959659"},{"product_id":"lv-lp04-projector-lamp-module","title":"LV-LP04 projector lamp module","description":"\u003cp\u003eTwenty-four projectors from five brands rely on the LV-LP04 module, a 150-watt lamp rated at 2,000 hours and supplied complete with housing. It fits Canon's LV-7500 and LV-7510, Eiki's LC-S880 and LC-X983 ranges, several Sanyo PLC-XP models, two Proxima DP-9250 projectors, and the Boxlight MP-25T and MP-35T.\u003c\/p\u003e\u003cp\u003eThis lamp has picked up several codes over the years, including 610-279-5417, LAMP-014, MP35T-930, LV-LP02, POA-LMP18 and POA-LMP18J, so cross-check whichever one is printed on your old lamp against this list. Because it is a module, the housing comes fitted already, and the whole assembly is swapped as one piece rather than just the bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08516\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 24 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need to match the exact code, or will any of the alternatives do?\u003c\/strong\u003e\u003cbr\u003eAny of the codes we list, LV-LP04, LAMP-014, MP35T-930, POA-LMP18 or the others, point to the same lamp, so matching any one of them against your old part confirms the fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is 610 279 5417 sometimes written with spaces and sometimes with dashes?\u003c\/strong\u003e\u003cbr\u003eDifferent suppliers format the same code differently; 610 279 5417 and 610-279-5417 refer to the identical number, so punctuation differences don't change whether it fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the housing come already attached to this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, LV-LP04 is sold as a complete module with the housing fitted, so you fit the whole unit into the lamp bay rather than swapping just the bulb into an old cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which of the 24 listed projectors is mine?\u003c\/strong\u003e\u003cbr\u003eCheck the model number printed on your projector's case or in its on-screen menu against the brand-by-brand list above, since Canon, Eiki, Sanyo, Proxima and Boxlight all badge this same design differently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if I keep using the projector after the lamp is due for replacement?\u003c\/strong\u003e\u003cbr\u003eThe image will usually keep getting dimmer and may develop colour shifts, and in some cases the projector will refuse to start once its internal lamp-hours counter is well past the 2,000-hour mark.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182574907628,"sku":"LA-08516","price":135.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/36728-xl.png?v=1786965471"},{"product_id":"poa-lmp129-projector-lamp-module","title":"POA-LMP129 projector lamp with module","description":"\u003cp\u003ePOA-LMP129 is a 175-watt lamp module rated for 3500 hours, one of the longer-life bulbs in this range, fitted to ten projectors across Eiki's LC-XD25 line and Sanyo's PLC-XW series, including the PLC-XW65 and PLC-XW7000C. Sanyo also lists the identical part as 610-341-7493.\u003c\/p\u003e\u003cp\u003eWith ten compatible projectors spanning both Eiki and Sanyo badges, including the PLC-XW1100C, PLC-XW6605C and PLC-XW6685C, always confirm the exact suffix on your unit rather than assuming from the PLC-XW prefix alone. POA-LMP129 is supplied as the complete module only; we do not list a separate bare-lamp code for this range.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 175 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08956\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated life of POA-LMP129?\u003c\/strong\u003e\u003cbr\u003eIt is rated at 175 watts with a 3500-hour service life, one of the longer ratings in the Eiki and Sanyo lamp range. Actual bulb life still depends on usage patterns and the brightness mode selected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo PLC-XW models take this lamp?\u003c\/strong\u003e\u003cbr\u003eThe PLC-XW65, PLC-XW1100C, PLC-XW6605C, PLC-XW6685C and PLC-XW7000C all use POA-LMP129. Check your exact model suffix on the projector's rating label, since the PLC-XW range covers several distinct generations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this lamp have both a spaced and hyphenated code?\u003c\/strong\u003e\u003cbr\u003e610 341 7493 and 610-341-7493 are the same Sanyo reference written with and without a hyphen; both point to the identical lamp listed here as POA-LMP129.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bare version of POA-LMP129 available?\u003c\/strong\u003e\u003cbr\u003eNot currently; we list this lamp only as the complete module with housing. If your existing housing is still sound, it can be kept as a spare once the new module is fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes POA-LMP129 fit the Eiki LC-XD25U as well as the LC-XD25?\u003c\/strong\u003e\u003cbr\u003eYes, both the LC-XD25 and LC-XD25U are listed against this lamp. The U suffix generally marks a regional variant rather than a different lamp requirement in this case.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182575399148,"sku":"LA-08956","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/35049-xl.png?v=1786965278"},{"product_id":"03-000708-01p-projector-lamp","title":"03-000708-01P bare projector lamp","description":"\u003cp\u003eOlder Christie, Eiki and Sanyo projectors - the Christie LX65 and Roadrunner LX65, Eiki's LC-X5 family and Sanyo's PLC-XF35 range - all use the 03-000708-01P bulb across eleven listed models. Rated at 250W with a 1000-hour lamp life, this is a bare-bulb listing built to fit an existing housing. No photograph is available, so a generic image represents this part.\u003c\/p\u003e\u003cp\u003eChristie also sold this same lamp under the Perception 03-000708-01P branding, and Sanyo's own reference is POA-LMP52, sometimes printed as 610-301-6047 on service documentation. All four labels describe the identical 250W bulb. At 1000 rated hours, this is a shorter-life lamp than others in our catalogue, so it suits projectors already several years old where a lower-cost bare bulb makes sense.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 250 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08675\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 11 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sanyo code for this bulb?\u003c\/strong\u003e\u003cbr\u003eSanyo lists this same lamp as POA-LMP52, sometimes shown as 610-301-6047 on older service paperwork. Both of these references describe the identical 03-000708-01P bulb, regardless of which one appears on your unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Perception label refer to?\u003c\/strong\u003e\u003cbr\u003ePerception was a branding Christie used on some early 03-000708-01P documentation and projector badging. It refers to the same bulb covered by this listing, not a separate or different product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Eiki models take this lamp?\u003c\/strong\u003e\u003cbr\u003eThis bulb fits the Eiki LC-X5, LC-X5DL and LC-X5L models. Check your projector's model plate against this list to confirm before ordering, since Eiki reused similar names across several ranges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is this lamp's rated life shorter than others?\u003c\/strong\u003e\u003cbr\u003e03-000708-01P is rated for 1000 hours, shorter than many lamps in our range, reflecting the specification of the older projector generation it was designed for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this listing use a generic image?\u003c\/strong\u003e\u003cbr\u003eNo manufacturer photograph exists for 03-000708-01P in our system, so a placeholder image is shown instead. The specification and compatibility list above remain accurate regardless of the image displayed.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182576972012,"sku":"LA-08675","price":85.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"poa-lmp125-projector-lamp-module","title":"POA-LMP125 projector lamp with module","description":"\u003cp\u003eAt 330 watts, POA-LMP125 is one of the higher-power lamps in the range, rated for 2500 hours and fitted to twelve projectors across Eiki's LC-XG500 and LC-XGC500 families and Sanyo's PLC-WTC and PLC-XTC ranges. This code carries an unusually long list of alternative numbers, including 610-342-2626, LC-WGC500 and ET-SLMP125.\u003c\/p\u003e\u003cp\u003eSome of those alternative codes, such as LC-WGC500 and LC-WGC500A, look like projector model numbers rather than lamp codes, which can cause confusion when ordering, so always cross-check against POA-LMP125 or PLC-XTC50AL directly. This listing is the complete module with housing; we do not list a separate bare-lamp version of this code.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08962\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 12 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does POA-LMP125 have so many alternative part numbers?\u003c\/strong\u003e\u003cbr\u003eThis lamp has been catalogued under eight different references, including 610-342-2626, LC-WGC500, LC-WGC500A, LC-WGC500L, ET-SLMP125 and PLC-XTC50AL, most likely because Eiki and Sanyo each documented it separately across several projector generations. All refer to the identical lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre LC-WGC500 and LC-WGC500A projector models or lamp codes?\u003c\/strong\u003e\u003cbr\u003eIn this listing they are recorded as alternative lamp codes for POA-LMP125, even though the format resembles a projector model number. If you see either printed on your old bulb, it is the same lamp as POA-LMP125.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does the POA-LMP125 sit on wattage among Eiki and Sanyo lamps?\u003c\/strong\u003e\u003cbr\u003eAt 330 watts with a 2500-hour rated life, it is one of the more powerful lamps across the Eiki and Sanyo range covered here. It is supplied as the complete module rather than a bare bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo models take POA-LMP125?\u003c\/strong\u003e\u003cbr\u003eThe PLC-WTC500AL, PLC-WTC500L, PLC-WTC50L, PLC-XTC50L and PLC-XTC55L all use this lamp. Confirm the exact suffix on your projector's rating label, since the WTC and XTC ranges include several closely related variants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I make sense of so many part codes when checking compatibility?\u003c\/strong\u003e\u003cbr\u003eRather than trying to match every code, take the number printed directly on your existing bulb or its base label and search for that single code; any of the recorded alternatives will confirm this is the correct lamp.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182576939244,"sku":"LA-08962","price":197.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20717-xl.png?v=1786955725"},{"product_id":"003-120479-01-projector-lamp","title":"003-120479-01 bare projector lamp","description":"\u003cp\u003eFourteen projector models spanning Christie, Eiki and Sanyo take the 003-120479-01 bulb, including the Christie LX1000 and LX1200, Eiki's LC-X8 and LC-X800 ranges, and Sanyo's PLC-XF1000 and PLC-XF71 family. Rated at 330W with a 3000-hour lamp life, it is a bare-bulb listing designed to fit inside your projector's existing housing. No photograph is available, so a generic image is used.\u003c\/p\u003e\u003cp\u003eSanyo's own reference for this bulb is POA-LMP128, and you may also see 610-341-9497 printed on service labels for the same part. All three codes describe the identical 330W bulb. With a 3000-hour rating, this is one of the longer-lasting lamps in our range, and as a bare bulb it keeps costs down provided your existing housing is still sound.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08663\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 14 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sanyo's code for the 003-120479-01 bulb?\u003c\/strong\u003e\u003cbr\u003eSanyo lists this same bulb as POA-LMP128, and it also appears as 610-341-9497 on some service documentation. All three numbers point to the same 330W part, regardless of which brand's projector you own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Christie models take this bulb?\u003c\/strong\u003e\u003cbr\u003eThis bulb fits the Christie LX1000 and LX1200 projectors. Check your unit's model plate against this list before ordering, since Christie's LX range spans several different lamp types across the years.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should this bulb last?\u003c\/strong\u003e\u003cbr\u003e003-120479-01 carries a manufacturer-rated life of 3000 hours at 330W, one of the longer ratings in our catalogue for a bare bulb of this type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is a generic photo used here?\u003c\/strong\u003e\u003cbr\u003eNo manufacturer photograph exists for 003-120479-01 in our system, so we display a placeholder image instead. The specification and compatibility list above are accurate regardless of the image shown on the page.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bulb fit both the LC-X8 and LC-X800?\u003c\/strong\u003e\u003cbr\u003eYes, both the Eiki LC-X8 and LC-X800 families, along with their A and Ai variants, are listed against the 003-120479-01 bulb, so any of these Eiki models will take this part.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182578315500,"sku":"LA-08663","price":201.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"003-120504-01-projector-lamp-module","title":"003-120504-01 projector lamp module","description":"\u003cp\u003e003-120504-01 is a module lamp fitted across twelve Christie, Eiki and Sanyo projectors, from the Christie DHD700 and DS+750 through Eiki's EIP-HDT20 and EIP-SXG20 to Sanyo's PDG-DHT1000 and PDG-DHT100 ranges. Rated at 330W with a 2000-hour lamp life, it arrives as a complete module, so the bulb and housing are fitted together as one piece.\u003c\/p\u003e\u003cp\u003eSanyo and Eiki paperwork for this part often shows LMP130 or POA-LMP130 rather than the Christie code 003-120504-01, and you may also see 610 343 5336 written with or without hyphens. All of these describe the same module. Because it is a full module rather than a bare bulb, no separate housing needs to be sourced - the whole assembly is replaced in one step.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08626\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 12 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Eiki's code for this module?\u003c\/strong\u003e\u003cbr\u003eEiki and Sanyo documentation typically shows LMP130 or POA-LMP130 for this same part, while Christie references it as 003-120504-01. All of these codes describe the identical 330W module, whichever brand's projector you own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo projectors take 003-120504-01?\u003c\/strong\u003e\u003cbr\u003eThis module fits Sanyo's PDG-DET100L, PDG-DHT1000CL, PDG-DHT1000CWL, PDG-DHT100L, PDG-DHT100WL and PDT-DHT100WL models. Confirm your Sanyo unit against this list carefully before ordering, since some model names differ by only a letter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 610-343-5336 the same part as 003-120504-01?\u003c\/strong\u003e\u003cbr\u003eYes, 610 343 5336, also written 610-343-5336, is an alternative code for the identical module, used mainly on Sanyo and Eiki service documentation rather than Christie paperwork, so either reference confirms fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lifespan does the 003-120504-01 module carry?\u003c\/strong\u003e\u003cbr\u003e003-120504-01 is rated for 2000 hours at 330W under standard operating conditions, in line with similar Christie, Eiki and Sanyo installation modules covered elsewhere in this range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit this module into an EIP-HDT20?\u003c\/strong\u003e\u003cbr\u003eOpen the lamp compartment on the Eiki EIP-HDT20 chassis, remove the retaining screw securing the old module, lift it clear, and fit the new 003-120504-01 module into the same bay before closing the compartment.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182579331308,"sku":"LA-08626","price":78.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34117-xl.png?v=1786962606"},{"product_id":"lv-lp18-projector-lamp-module","title":"LV-LP18 projector lamp module","description":"\u003cp\u003eThis module, LV-LP18, is shared by 42 projectors spanning five brands, running at 200 watts for 2,000 hours with the housing built in. It covers Canon's LV-7210 through LV-7230, the Christie LX25 and Vivid LX25, sixteen Eiki LC-XB models, the Boxlight CP-320ta and DVN-C65M, and a wide range of Sanyo PLC-XU and PLC-XE projectors.\u003c\/p\u003e\u003cp\u003eOlder stock or third-party listings may show this lamp as 03-000754-01P, 610-309-2706, CP320TA-930, LMP55, POA-LMP55 or ET-SLMP55, all of which are the same part as LV-LP18. Because it comes as a complete module, the housing is included, so the whole assembly is fitted as one piece rather than transferring a bulb into your old cage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08505\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 42 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWith so many brands listed, how do I know which code matches my old lamp?\u003c\/strong\u003e\u003cbr\u003eCanon, Christie, Eiki, Sanyo and Boxlight have each used a different code for this identical lamp over time, so match whichever of LV-LP18, LMP55, POA-LMP55 or the other alternatives appears on your existing part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the housing supplied with this module?\u003c\/strong\u003e\u003cbr\u003eYes, LV-LP18 is sold as a complete module with the housing already fitted, so the entire assembly is installed together rather than the bulb alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy Eiki projector is an LC-XB model not listed by exact number, will it still fit?\u003c\/strong\u003e\u003cbr\u003eThe listing covers LC-XB15 through LC-XB30 and their D variants, so if your model number falls within that range it is confirmed to take this lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the benefit of choosing a module over the bare LV-LP18 lamp?\u003c\/strong\u003e\u003cbr\u003eA module replaces the housing as well as the bulb, which is worth doing if your current housing shows wear, cracking or a loose connector alongside a failing lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I safely remove the old module before fitting this one?\u003c\/strong\u003e\u003cbr\u003eSwitch the projector off, unplug it, and let it cool fully before opening the lamp compartment, then release whatever screws or catches hold the module in place before lifting it out.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182579429612,"sku":"LA-08505","price":123.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20481-xl.png?v=1786955676"},{"product_id":"lv-lp18-projector-lamp","title":"LV-LP18 bare projector lamp","description":"\u003cp\u003eThirty-seven projectors take the bare version of LV-LP18, a 200-watt lamp rated at 2,000 hours with no housing included. It fits Canon's LV-7210 to LV-7230, the Christie LX25 and Vivid LX25, fourteen Eiki LC-XB models, the Boxlight CP-320ta, and a long list of Sanyo PLC-XU, PLC-XE, PLC-XL and PLC-SU55 projectors.\u003c\/p\u003e\u003cp\u003eYou may find this same bulb marked 03-000754-01P, 610-309-2706, CP320TA-930, POA-LMP55 or ET-SLMP55, depending on which brand's label is on your projector. As a bare lamp it has no housing of its own, so fitting it means placing the new bulb into the housing that already exists inside your Canon, Christie, Eiki, Sanyo or Boxlight machine.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08504\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 37 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the LV-LP18 module listed separately?\u003c\/strong\u003e\u003cbr\u003eThis is the bare bulb only, for when your existing housing is still sound; the module listing includes a fresh housing built in, for when the housing needs replacing too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do the alternative codes differ slightly between the bare and module listings?\u003c\/strong\u003e\u003cbr\u003eSuppliers sometimes format or catalogue the bare bulb and the complete module under slightly different reference numbers, even though the underlying lamp, 03-000754-01P, 610-309-2706, POA-LMP55 or ET-SLMP55, is the same.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the housing come with this bare lamp?\u003c\/strong\u003e\u003cbr\u003eNo, this version is the bulb only, so the housing already fitted inside your Canon, Christie, Eiki, Sanyo or Boxlight projector is reused rather than replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy Sanyo model is a PLC-XU58, is that covered?\u003c\/strong\u003e\u003cbr\u003eYes, the PLC-XU58 is one of the Sanyo models listed for this lamp, alongside the PLC-XU47, PLC-XU48, PLC-XU50, PLC-XU51 and PLC-XU55 among the other Sanyo projectors this bulb fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's a sensible time to swap this lamp out?\u003c\/strong\u003e\u003cbr\u003eMost people replace it once the picture has visibly dimmed or the projector's lamp-hours counter is approaching the 2,000-hour rating, rather than waiting for the lamp to fail outright.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182580543724,"sku":"LA-08504","price":148.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"003-120577-01-projector-lamp","title":"003-120577-01 bare projector lamp","description":"\u003cp\u003eChristie's DHD800, alongside Eiki's EIP-HDT30 and EIP-HDT30i, and three Sanyo PDG-DHT8000 models, all use lamp 003-120577-01. Rated at 330W with a 3000-hour lamp life, this is a bare-bulb listing built for an existing housing rather than a full module. No manufacturer photograph is available for this part, so a generic image is displayed in its place.\u003c\/p\u003e\u003cp\u003eSanyo's own code for this bulb is POA-LMP145, also written as 610-350-6814 on some service labels, while Christie and Eiki paperwork uses 003-120577-01. All three describe the same 330W bulb. With seven compatible models across three brands, checking your exact projector model against the list above is the most reliable way to confirm fit before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08629\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 7 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sanyo's reference for this bulb?\u003c\/strong\u003e\u003cbr\u003eSanyo lists this bulb as POA-LMP145, sometimes shown as 610-350-6814 on service documentation. Christie and Eiki paperwork instead uses 003-120577-01 - all three references describe the same physical part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Eiki projectors take this lamp?\u003c\/strong\u003e\u003cbr\u003eThis bulb fits the Eiki EIP-HDT30 and EIP-HDT30i models. Confirm your Eiki unit's exact designation before ordering, since similar model names in this range can take different lamps entirely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is 003-120577-01 rated to last?\u003c\/strong\u003e\u003cbr\u003eThis bulb carries a manufacturer-rated life of 3000 hours at 330W, among the longer ratings in our range for a bare bulb of this wattage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is there no product photo for this lamp?\u003c\/strong\u003e\u003cbr\u003eNo manufacturer photograph exists for 003-120577-01 in our system, so a generic placeholder image is used. The specification details above are accurate regardless of the image shown on this page.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bulb need a new housing as well?\u003c\/strong\u003e\u003cbr\u003eNo - 003-120577-01 is a bare bulb that fits inside your existing DHD800, EIP-HDT30 or PDG-DHT8000 housing, so no separate housing purchase is required if your current one is undamaged.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182581821676,"sku":"LA-08629","price":201.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lamp-028-projector-lamp-module","title":"LAMP-028 projector lamp module","description":"\u003cp\u003eLAMP-028 is a complete lamp module shared across eight rebadged projectors sold under three names: Eiki's LC-XT1 and LC-XT1D, Proxima's PLC-XF21 and ProAV9350, and Sanyo's PLC-XF20, PLC-XF20E, PLC-XF21 and PLC-XF21E. It runs at 150W with a 1000 hour rated life, reflecting an older, low-power generation of projector.\u003c\/p\u003e\u003cp\u003eThis lamp has also been sold as 610-284-4627 and POA-LMP29, so check any of those three codes against the marking on your old lamp before ordering. As a module, the bulb comes pre-fitted in its housing, ready to swap in as a complete unit rather than handling the bare burner alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08974\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do Eiki, Proxima and Sanyo projectors all use LAMP-028?\u003c\/strong\u003e\u003cbr\u003eThese three brands sold the same projector design under different names, and the lamp inside was never changed between them. Whether your unit is badged Eiki, Proxima or Sanyo, the LC-XT1, PLC-XF21 and PLC-XF20 families all take this identical module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eI have a part marked POA-LMP29 - is that the same as LAMP-028?\u003c\/strong\u003e\u003cbr\u003eYes. POA-LMP29 and 610-284-4627 are both earlier codes for this same lamp. If your old unit carries either marking, ordering under LAMP-028 will still get you the correct, matching part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith a 1000 hour rating, when should I expect to replace LAMP-028?\u003c\/strong\u003e\u003cbr\u003eAround 1000 hours is the point most owners notice the picture has dimmed or taken on a yellow tint. Some projectors also flag lamp hours on screen, which is worth checking before that figure is reached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp arrive ready to fit or do I need extra parts?\u003c\/strong\u003e\u003cbr\u003eIt is supplied as a full module with the bulb already mounted in its housing and connector, so nothing extra is needed. The old module comes out as one piece and the replacement goes in the same way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe lamp is rated at 150W - does that affect brightness compared with newer lamps?\u003c\/strong\u003e\u003cbr\u003e150W reflects the lower-power design common to this generation of projector, and is simply the figure this specific model was built around rather than a limitation. A different wattage lamp is not something we list for these models.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182582051052,"sku":"LA-08974","price":65.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27699-xl.png?v=1786959017"},{"product_id":"003-120641-01-projector-lamp","title":"003-120641-01 bare projector lamp","description":"\u003cp\u003e003-120641-01 is the highest-wattage lamp among this batch of listings, running at 380W across five Christie, Eiki and Sanyo projectors: the Christie LHD700, Eiki's LC-HDT700, LC-HDT700D and LC-HDT700i, and Sanyo's PLC-HP7000L. Rated for 3000 hours, it ships as a bare bulb designed to fit inside your projector's existing housing rather than as a complete assembly.\u003c\/p\u003e\u003cp\u003eSanyo references this bulb as ET-SLMP149 or POA-LMP149, and you may also see 610-357-0464 printed on older service labels. All of these codes, along with Christie's 003-120641-01, describe the identical 380W bulb. Given the higher wattage, allow the projector to cool fully before removing the old bulb, and handle the new one by its base rather than the glass envelope.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 380 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08647\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy is this bulb rated higher than others in the range?\u003c\/strong\u003e\u003cbr\u003e003-120641-01 runs at 380W, reflecting the brightness needed for the Christie LHD700 and its Eiki and Sanyo equivalents, which are brighter installation-class projectors than some other models in our catalogue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are Sanyo's codes for this bulb?\u003c\/strong\u003e\u003cbr\u003eSanyo lists this part as both ET-SLMP149 and POA-LMP149, and it may also appear as 610-357-0464 on older documentation. All of these references describe the same 380W bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there precautions when installing the bare 003-120641-01 by hand?\u003c\/strong\u003e\u003cbr\u003eYes. Let the projector cool fully before removing the old bulb, and hold the new one by its base rather than the glass, since oils from skin contact can shorten a bulb's working life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo projector takes 003-120641-01?\u003c\/strong\u003e\u003cbr\u003eThis bulb fits the Sanyo PLC-HP7000L. Check your Sanyo unit's exact model code before ordering, since similarly named models in the same range may use a different lamp entirely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hours of projection is the 003-120641-01 built to deliver?\u003c\/strong\u003e\u003cbr\u003e003-120641-01 is rated for 3000 hours at 380W under standard operating conditions, one of the longer ratings among the higher-wattage bulbs in our current range of listings.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182582673644,"sku":"LA-08647","price":517.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32051-lg.png?v=1786959664"},{"product_id":"03-000712-01p-projector-lamp-module","title":"03-000712-01P projector lamp module","description":"\u003cp\u003eChristie's LX32, LX34 and Vivid LX32, Eiki's DLP-380, LC-XG110 and LC-XG210, Sanyo's DLP-380 and a run of PLC-XT models, and five Boxlight projectors including the MP-50t through MP-66T all share the 03-000712-01P lamp module. It runs at 250 watts, rated for 2,000 hours, with the housing supplied ready-fitted.\u003c\/p\u003e\u003cp\u003eThis lamp has also been coded 610-305-5602, LMP59, MP56T-930 and POA-LMP59 across the various brands that use it, so any of these numbers on your old lamp confirms a match. As a module, the housing is included, meaning the complete assembly is fitted in one go rather than swapping a bulb into your existing cage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 250 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08525\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 24 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does Christie's LX32 use the same lamp as a Sanyo PLC-XT model?\u003c\/strong\u003e\u003cbr\u003eChristie, Eiki, Sanyo and Boxlight built related projector platforms that shared internal components, including the lamp, so 03-000712-01P fits across all four brands despite the different model names.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 610 305 5602 the same as 610-305-5602?\u003c\/strong\u003e\u003cbr\u003eYes, that's the identical code shown with and without dashes; both forms refer to the same lamp as 03-000712-01P, LMP59, MP56T-930 and POA-LMP59, so either one confirms the part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the module come with a new housing?\u003c\/strong\u003e\u003cbr\u003eYes, 03-000712-01P is sold as a complete module, housing included, so the whole assembly replaces the old one rather than just the bulb inside it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy Eiki projector is the LC-XG210D, is that covered?\u003c\/strong\u003e\u003cbr\u003eYes, the LC-XG210D is included alongside the LC-XG110, LC-XG110D and LC-XG210 as one of the Eiki models confirmed to use this same 03-000712-01P lamp module across the range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know when this lamp needs swapping out?\u003c\/strong\u003e\u003cbr\u003eWatch for a picture that has dimmed noticeably or a lamp warning message on the projector, both signs the 2,000-hour rating on this 250-watt lamp is being approached or exceeded.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182583492844,"sku":"LA-08525","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20486-xl.png?v=1786955681"},{"product_id":"003-120183-01-projector-lamp-module","title":"003-120183-01 projector lamp module","description":"\u003cp\u003eNineteen projector models - the widest compatibility list in this batch - share the 003-120183-01 lamp, supplied here as a full module. Christie's LX120, Eiki's LC-XT4 range including the standalone LMP100 designation, and Sanyo's PLC-XF46 and PLC-XF4600 family are all covered. Rated at 300W with a 2000-hour lamp life, the bulb and housing arrive fitted together as one unit.\u003c\/p\u003e\u003cp\u003eSanyo's own code for this module is POA-LMP100, also written ET-SLMP100, and you may see 610 327 4928, or 610-327-4928, on Eiki or Sanyo service labels. All of these describe the same 003-120183-01 module. With nineteen compatible models spread across three brands, matching your exact projector name against the list above is worth doing even if the brand and wattage look right.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 300 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08666\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 19 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many projectors does this module fit?\u003c\/strong\u003e\u003cbr\u003e003-120183-01 is listed against 19 projector models across Christie, Eiki and Sanyo, making it one of the broadest-fitting modules in our catalogue for this generation of projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is Sanyo's code for 003-120183-01?\u003c\/strong\u003e\u003cbr\u003eSanyo references this module as POA-LMP100 or ET-SLMP100, and it may also appear as 610-327-4928 on service documentation. All of these codes describe the identical part regardless of brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIf my existing housing is still good, can I get the 003-120183-01 as a bulb only?\u003c\/strong\u003e\u003cbr\u003eYes, the same 003-120183-01 lamp is also listed as a bare bulb without housing, as a separate product, for owners whose existing housing does not need replacing at this time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated lamp life of this module?\u003c\/strong\u003e\u003cbr\u003e003-120183-01 is rated for 2000 hours at 300W under standard operating conditions, in line with comparable modules of this wattage elsewhere in our catalogue of Christie and Sanyo parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Eiki models are covered by this listing?\u003c\/strong\u003e\u003cbr\u003eThis module fits the Eiki LC-XT4, LC-XT44, LC-XT4D, LC-XT4E and LC-XT4U, along with the standalone Eiki LMP100 designation used on some units, so check the full name printed on your unit.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182583754988,"sku":"LA-08666","price":155.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28879-xl.png?v=1786959196"},{"product_id":"lv-lp13-projector-lamp","title":"LV-LP13 bare projector lamp","description":"\u003cp\u003eSeven brands share the LV-LP13 bare lamp across 34 projectors, running at 200 watts with a 1,000-hour rating, shorter than many lamps in our range. It fits Christie's LW25, LW26, LX26 and LX35 models, Eiki's LC-X985 and LC-X1000 ranges, Sanyo's PLV-70 and PLV-75 and several PLC-XP models, Canon's LV-7545, two Proxima projectors, three Boxlight models, and the Studio Experience Cinema 20HD.\u003c\/p\u003e\u003cp\u003eThis lamp carries an unusually long list of codes, including 003-120061, 03-000649-02P, 610-293-5868, 610-325-2940, LAMP-032, MP41T-930, POA-LMP38 and POA-LMP99, with the Studio Experience branded versions repeating several of these under an 'Experience' label. All of them refer to the identical bare bulb, which fits into the housing already inside your projector.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08490\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 34 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does my lamp have 'Experience' written before the code?\u003c\/strong\u003e\u003cbr\u003eStudio Experience, the brand behind the Cinema 20HD, printed its own labels with 'Experience' ahead of the same reference numbers, such as Experience LAMP-032 or Experience LV-LP13, but the lamp itself is identical to LV-LP13.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the lamp life only 1,000 hours when others are longer?\u003c\/strong\u003e\u003cbr\u003eThe 1,000-hour figure is simply what's specified for LV-LP13; lamp life varies between designs, and this one is rated shorter than the 2,000-hour lamps common elsewhere in our range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bare lamp include the housing?\u003c\/strong\u003e\u003cbr\u003eNo, LV-LP13 is a bare bulb only, meant to be fitted into the housing already built into your Christie, Eiki, Sanyo, Canon, Proxima or Boxlight projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector is a Sanyo PLV-75L, is that covered by this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, the PLV-75L appears alongside the PLV-70, PLV-70L and PLV-75 as one of the Sanyo models we confirm use LV-LP13, based on the projector's own specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know this lamp has reached the end of its rated life?\u003c\/strong\u003e\u003cbr\u003eSince it's rated at 1,000 hours, a shorter span than many lamps, keep an eye on brightness sooner than you might with other projectors, and treat a dimming or flickering picture as a sign it's due.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182584541420,"sku":"LA-08490","price":148.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/31995-lg.png?v=1786959669"},{"product_id":"poa-lmp107-projector-lamp-module","title":"POA-LMP107 projector lamp module","description":"\u003cp\u003eA wide family of projectors, sold under three names, AV Vision, Eiki and Sanyo, all rely on the same lamp inside: POA-LMP107. It covers everything from the AV Vision X4200 and Eiki LC-XA20 through to Sanyo's larger PLC-XW6000C and PLC-XW6600C range, nineteen models in total, built around one identical bulb and housing.\u003c\/p\u003e\u003cp\u003eThis lamp has picked up several alternative references over the years, including Vision 610-330-4564 and the plain 610-330-4564 code, alongside POA-LMP107 itself; all describe the identical module. Given how many projectors share this part, it is worth matching the code on your old lamp exactly before ordering, rather than relying on the model name alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08142\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 19 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do AV Vision, Eiki and Sanyo projectors all take POA-LMP107?\u003c\/strong\u003e\u003cbr\u003eThese three brands have sold rebadged versions of the same projector designs, and the lamp inside was never changed between them. Whichever brand your unit carries, if it appears on our list of nineteen matched models, POA-LMP107 is the correct part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the code 610-330-4564 refer to?\u003c\/strong\u003e\u003cbr\u003eIt is an older reference for this same POA-LMP107 module, sometimes shown with or without the word Vision in front of it. If your existing lamp carries any of these markings, this listing is still the right match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith nineteen projectors listed, how do I confirm this is right for my exact model?\u003c\/strong\u003e\u003cbr\u003eCheck your projector's model plate against the brand groupings we show, whether AV Vision, Eiki or Sanyo, and compare it with the code on your existing lamp if you can access it, since that is the most reliable check.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes POA-LMP107 include the housing, or just the bulb?\u003c\/strong\u003e\u003cbr\u003eIt is a complete module, so the bulb arrives already fitted into its housing and connector. The old assembly comes out as a single unit and the new one goes in the same way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the same lamp have so many different alternative codes?\u003c\/strong\u003e\u003cbr\u003eLamps that are shared across many rebadged projectors, like this one across AV Vision, Eiki and Sanyo, tend to accumulate extra codes as each brand documents the part slightly differently, even though the underlying lamp never changes.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182587097324,"sku":"LA-08142","price":123.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28168-xl.png?v=1786959066"},{"product_id":"poa-lmp47-projector-lamp-module","title":"POA-LMP47 275W projector lamp with module","description":"\u003cp\u003eSanyo, Eiki, Christie, Boxlight, Infocus, Proxima, High End Systems and Toshiba all sold projectors taking the same lamp, and POA-LMP47 is the 275-watt, 1500-hour lamp and housing common to all of them, covering models such as the Sanyo PLC-XP41, Eiki LC-X1100, Christie LX33 and Toshiba TLP-X4100. Forty listed projectors share this one module.\u003c\/p\u003e\u003cp\u003eThis lamp also carries the references 03-000667-01P, 610-297-3891 and SP-LAMP-011, along with the Toshiba code TLPLX40, so any of these on your old unit or documentation point to the same part. With eight brands and forty models involved, matching your projector's exact name against the list above is worth the extra check before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08521\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 40 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does Sanyo's PLC-XP46 share a lamp with a Christie projector?\u003c\/strong\u003e\u003cbr\u003eSanyo manufactured projectors that were sold under several other names, including Christie, Boxlight, Eiki, High End Systems, Infocus, Proxima and Toshiba. POA-LMP47 is the lamp fitted inside all of these related models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do 03-000667-01P and 610-297-3891 refer to?\u003c\/strong\u003e\u003cbr\u003eThese are alternative part codes for the identical POA-LMP47 lamp, used in different manufacturers' documentation. SP-LAMP-011 and the Toshiba code TLPLX40 also refer to the same part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage and lamp life does POA-LMP47 have?\u003c\/strong\u003e\u003cbr\u003eIt is rated at 275 watts with a quoted life of 1500 hours, on the higher-output end of the lamps we carry, which is reflected in the shorter rated life compared with lower-wattage alternatives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which of the forty listed models my projector matches?\u003c\/strong\u003e\u003cbr\u003eCheck the brand name and full model code together, for example Sanyo PLC-XP41L rather than just PLC-XP41, since several near-identical variants are listed across the Boxlight, Christie, Eiki, Infocus, Proxima, Sanyo and Toshiba ranges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the POA-LMP47 listing come as a complete module?\u003c\/strong\u003e\u003cbr\u003eYes, this is the complete lamp with module, so the bulb arrives fitted inside a housing ready to replace the old assembly directly. A bare bulb version of the same lamp is not currently listed in this range.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182587588844,"sku":"LA-08521","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27458-xl.png?v=1786958955"},{"product_id":"002-120598-01-projector-lamp","title":"002-120598-01 bare projector lamp","description":"\u003cp\u003ePanasonic's PT-EX12K joins Christie, Eiki and Sanyo models in sharing the 002-120598-01 bulb, the broadest brand spread among these listings. It covers the Christie L2K1000, Eiki's EIP-HDT1000 and LC-HDT1000, Panasonic's PT-EX12K, PT-EX12KE, PT-EX12KU and PT-SLX12KC, and Sanyo's PLC-HF1000 family. Rated at 380W with a 2000-hour lamp life, this is a bare-bulb listing for an existing housing.\u003c\/p\u003e\u003cp\u003ePanasonic's own reference for this bulb is ET-LAE12, while Sanyo documentation shows POA-LMP146, and 610-351-5939 appears on some service labels regardless of brand. All four codes, together with 002-120598-01, describe the identical 380W bulb. Because four brands share this one part, confirm your exact projector model against the list above rather than assuming compatibility from the brand name alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 380 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08643\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 11 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Panasonic's code for this bulb?\u003c\/strong\u003e\u003cbr\u003ePanasonic references this same bulb as ET-LAE12. Sanyo documentation instead shows POA-LMP146, while Christie and Eiki paperwork uses 002-120598-01 - all of these codes describe the identical physical part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Panasonic projectors take this lamp?\u003c\/strong\u003e\u003cbr\u003eThis bulb fits the Panasonic PT-EX12K, PT-EX12KE, PT-EX12KU and PT-SLX12KC models. Confirm your exact Panasonic model designation before ordering, since the suffix letters mark different regional variants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do four different brands share this one bulb?\u003c\/strong\u003e\u003cbr\u003eChristie, Eiki, Panasonic and Sanyo each sold projectors built on related underlying hardware in this product line, so the same 380W bulb, 002-120598-01, fits models across all four brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lamp life is quoted for this bulb?\u003c\/strong\u003e\u003cbr\u003e002-120598-01 is rated for 2000 hours at 380W under standard operating conditions, in line with other higher-wattage bare bulbs listed elsewhere in our current catalogue of parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere might I see the code 610-351-5939?\u003c\/strong\u003e\u003cbr\u003e610-351-5939 appears on some service labels for this bulb, regardless of which of the four brands manufactured the projector. It refers to the same 002-120598-01 part, not a different one.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182587752684,"sku":"LA-08643","price":288.37,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32045-lg.png?v=1786959665"},{"product_id":"610-304-5214-projector-lamp","title":"610-304-5214 bare projector lamp","description":"\u003cp\u003eFour projectors take the 610-304-5214: the Boxlight CP-320T, the Eiki LC-XNB5M and LC-XNB5MS, and the Sanyo PLC-XU45. It's a 200-watt bare lamp with a 2,000-hour rating, built to fit into the housing your projector already carries. The same lamp is also listed under the codes CP320T-930 and POA-LMP63.\u003c\/p\u003e\u003cp\u003eIf you've seen this lamp listed as CP320T-930 or POA-LMP63, it's the same part as 610-304-5214 — Boxlight, Eiki and Sanyo have each issued their own code for it over the years. Since it's a bare lamp, order only if your existing housing and cage are still sound, as those aren't replaced here.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08502\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs POA-LMP63 the same lamp as 610-304-5214?\u003c\/strong\u003e\u003cbr\u003eYes. POA-LMP63 and CP320T-930 are both alternative codes for the same lamp we list as 610-304-5214. Any of the three numbers should lead you to this part, provided your projector is one of the four listed models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Eiki models use the 610-304-5214?\u003c\/strong\u003e\u003cbr\u003eTwo Eiki models take this lamp: the LC-XNB5M and the LC-XNB5MS. It's also listed for the Boxlight CP-320T and the Sanyo PLC-XU45, so confirm your exact model before placing an order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering 610-304-5214?\u003c\/strong\u003e\u003cbr\u003eMatch your projector's model name against the four listed here — Boxlight CP-320T, Eiki LC-XNB5M, LC-XNB5MS, or Sanyo PLC-XU45 — rather than relying on the part number alone, since some units share codes across brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow old can a projector lamp get before it should be replaced?\u003c\/strong\u003e\u003cbr\u003eThere's no fixed figure to give here since that depends on hours used and how the projector has been run, rather than calendar age. If your image has dimmed noticeably or the lamp indicator has lit up, it's worth fitting a replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it mean when a lamp is listed as 'original'?\u003c\/strong\u003e\u003cbr\u003eAn original lamp is built to the same specification as the part first fitted to your projector by its maker, rather than a generic substitute. We list 610-304-5214 under that code plus its known alternatives, CP320T-930 and POA-LMP63.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182589227244,"sku":"LA-08502","price":162.66,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"003-120183-01-projector-lamp","title":"003-120183-01 bare projector lamp","description":"\u003cp\u003e003-120183-01 also ships as a bare bulb, for owners with a serviceable existing housing across seventeen listed Christie, Eiki and Sanyo projectors, including the Christie LX120, Eiki's LC-XT4 range and Sanyo's PLC-XF46 and PLC-XF4600 family. Rated at 300W with a 2000-hour lamp life, this bare bulb fits inside your current housing rather than replacing it. No photograph is available for this listing.\u003c\/p\u003e\u003cp\u003eSanyo's own code for this bulb is POA-LMP100, sometimes shown as 610-327-4928 on service documentation, matching the codes used for the full module version of this same part. The bare bulb costs less than the module because you are reusing your existing housing, so it suits owners whose current housing and reflector show no cracks, discolouration or connector wear.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 300 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08665\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 17 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow does this bare 003-120183-01 differ from the housed version you sell?\u003c\/strong\u003e\u003cbr\u003eThis is the bare-bulb version of 003-120183-01, without housing. A separate module listing pairs the same 300W bulb with a complete new housing, for owners who need the whole assembly replaced rather than just the bulb itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo models take this bare bulb?\u003c\/strong\u003e\u003cbr\u003eThis bulb fits Sanyo's PLC-XF4200C, PLC-XF46, PLC-XF4600, PLC-XF4600C, PLC-XF46E and PLC-XF46N, along with the LP-HD2000 and PLV-HD2000 designations. Check your exact model before ordering this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many projectors does this bare bulb cover?\u003c\/strong\u003e\u003cbr\u003eThis listing covers 17 projector models across Christie, Eiki and Sanyo, a slightly narrower list than the equivalent module version, which also covers a couple of standalone LMP100-branded units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hours is this bulb rated for?\u003c\/strong\u003e\u003cbr\u003e003-120183-01 is rated for 2000 hours at 300W, the same figure as the module version, since the bulb itself is identical in both listings regardless of housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is a generic image used for this listing?\u003c\/strong\u003e\u003cbr\u003eNo manufacturer photograph exists for 003-120183-01 in our system, so a placeholder image is shown instead. The specification and compatibility list above are accurate regardless of the image shown on the page.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182590046444,"sku":"LA-08665","price":155.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"610-303-5826-projector-lamp-module","title":"610-303-5826 projector lamp with module","description":"\u003cp\u003eBoxlight, Canon, Eiki and Sanyo each sell projectors that take the 610-303-5826, fifteen models in total including the Canon LV-5200 and the Sanyo PLC-XU36. This version is a Projector Lamp with Module, so the bulb arrives already fitted into its own housing rather than needing your old one reused. It runs at 250 watts for 2,000 hours.\u003c\/p\u003e\u003cp\u003eThe same lamp is sold under several codes — CP12TA-930, LV-LP16, POA-LMP53 and POA-LMP94 among them — depending on which brand issued it, so don't be put off if a listing uses a different number to 610-303-5826. Because this is a full module, fitting it doesn't depend on the condition of your old housing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 250 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08499\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 15 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy are there so many part numbers for one lamp?\u003c\/strong\u003e\u003cbr\u003eBoxlight, Canon, Eiki and Sanyo have each sold projectors built around this same lamp and given it their own code — CP12TA-930, LV-LP16, POA-LMP53 and POA-LMP94 are all names for what we list as 610-303-5826.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 610-303-5826 a bulb-only lamp?\u003c\/strong\u003e\u003cbr\u003eNo, it's listed as a Projector Lamp with Module, meaning the bulb comes pre-fitted in a new housing. That's different from a bare lamp, which relies on your projector's existing housing staying in good condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo models take this lamp?\u003c\/strong\u003e\u003cbr\u003eEight Sanyo models are listed for the 610-303-5826, including the PLC-SU2000, PLC-SU40 and PLC-XU36 among others. Check your unit's exact model name against the full compatibility list before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit a module-style replacement lamp?\u003c\/strong\u003e\u003cbr\u003eBecause this version includes its own housing, fitting means removing the old module as a unit and placing the new one in the same slot, then reconnecting it the same way the old one was connected. Always let the projector cool first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated life of the 610-303-5826?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 2,000 hours running at 250 watts. This applies across all fifteen listed projectors from Boxlight, Canon, Eiki and Sanyo, since they share the same lamp and module design.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182590079212,"sku":"LA-08499","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28665-xl.png?v=1786959189"},{"product_id":"poa-lmp72-projector-lamp-module","title":"POA-LMP72 projector lamp module","description":"\u003cp\u003eEiki's LC-HDT10 and LC-HDT10D and Sanyo's PLV-HD10 and PLV-HD100 form part of a seven-projector family built around POA-LMP72. It runs at 250W with a 1500 hour rated life, figures suited to the higher brightness these home-cinema-oriented models were designed to produce.\u003c\/p\u003e\u003cp\u003eThis lamp is also referenced as 610-305-1130, an older-style code that appears alongside POA-LMP72 in some documentation; both describe the same module. As a complete assembly, the housing and connector are included, so fitting means lifting the old module out whole and locating the new one in the same bracket.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 250 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08924\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 7 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo the Eiki LC-HDT10 and Sanyo PLV-HD10 use the same lamp?\u003c\/strong\u003e\u003cbr\u003eYes, POA-LMP72 covers both, along with five other closely related models across the two brands. Eiki and Sanyo built these projectors around an identical lamp and housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the code 610-305-1130 mean?\u003c\/strong\u003e\u003cbr\u003eIt is an alternative reference for this same POA-LMP72 module, used in some older documentation. If your existing lamp is marked this way, this listing is still the correct match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is this lamp rated higher than some other Eiki modules, at 250W?\u003c\/strong\u003e\u003cbr\u003e250W reflects the brighter output these home-cinema-focused models were designed around, higher than some of the smaller office projectors in our range. It is simply the figure fitted to the LC-HDT10 and PLV-HD10 families.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I tell this lamp is nearing the end of its 1500 hour life?\u003c\/strong\u003e\u003cbr\u003eLook for the picture dimming gradually or shifting in colour, often toward yellow, as the bulb ages. Many Sanyo and Eiki models also display a lamp warning on screen as the hours accumulate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSince there's no photo, what does the module actually include?\u003c\/strong\u003e\u003cbr\u003eThe bulb, housing and connector all arrive fitted together as one assembly. You remove the existing module from your LC-HDT10 or PLV-HD10 as a single unit and fit this one in its place.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182591193324,"sku":"LA-08924","price":155.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"03-000750-01p-projector-lamp","title":"03-000750-01P bare projector lamp","description":"\u003cp\u003eChristie's LX37 and LX45, both in standard and Vivid form, take the 03-000750-01P, along with the Canon LV-7555, the Boxlight MP-45t and four Eiki LC-X50 variants. Rated at 300 watts with a 2,000-hour life, it's supplied as a bare lamp for fitting into your projector's existing housing. It is also known as LV-LP17 and POA-LMP67.\u003c\/p\u003e\u003cp\u003eFive brands have issued their own code for this lamp — 610-306-5977, LV-LP17 and POA-LMP67 alongside 03-000750-01P — so a listing under any of these numbers points to the same part. Since it's bare, order it only once you've confirmed the housing already fitted to your projector is intact.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 300 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08522\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 15 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the Christie LX37 use the same lamp as the LX45?\u003c\/strong\u003e\u003cbr\u003eYes. Both the Christie LX37 and LX45, including their Vivid-branded versions, are listed for the 03-000750-01P. It also fits ten other projectors across Boxlight, Canon, Eiki and Sanyo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs LV-LP17 the Canon code for this part?\u003c\/strong\u003e\u003cbr\u003eYes, LV-LP17 is the code Canon has used for this lamp, which we list under 03-000750-01P. The same part also appears as 610-306-5977 and POA-LMP67 under other brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many Eiki projectors take this lamp?\u003c\/strong\u003e\u003cbr\u003eFour Eiki models are listed: the LC-X50, LC-X50D, LC-X50DM and LC-X50M. Confirm which of these matches your unit before ordering, since Eiki's other ranges use different lamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the rated wattage for 03-000750-01P?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 300 watts with a service life of 2,000 hours. These figures are the same across all fifteen listed projectors, since they share the same lamp specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't there a photo of the actual lamp on this listing?\u003c\/strong\u003e\u003cbr\u003eWe don't hold a genuine product photo for every part we stock, and 03-000750-01P is one of them, so the image shown here is a generic placeholder rather than the lamp itself.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182591652076,"sku":"LA-08522","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"poa-lmp90-projector-lamp-module","title":"POA-LMP90 projector lamp module","description":"\u003cp\u003eTwenty projectors across three brands, Eiki, OKI and Sanyo, share the same lamp module in POA-LMP90. That spread runs from Eiki's LC-SB22 and LC-XB27N to OKI's LMP90 and P25X and a long run of Sanyo models in the PLC-XU and PLC-XL series. It runs at 200W with a 2000 hour rated life.\u003c\/p\u003e\u003cp\u003eThis lamp is also known as 610-323-0726, an older code that appears alongside POA-LMP90 for the same module. With twenty projectors sharing this part, matching the code printed on your old lamp against POA-LMP90 or 610-323-0726 is a more reliable check than relying on the model name alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08927\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 20 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does OKI appear alongside Eiki and Sanyo for this lamp?\u003c\/strong\u003e\u003cbr\u003eOKI sold rebadged versions of the same projectors as Eiki and Sanyo in this range, and the lamp inside was never changed between brands. The OKI LMP90 and P25X both take this identical POA-LMP90 module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith twenty projectors listed, how do I know POA-LMP90 is right for mine?\u003c\/strong\u003e\u003cbr\u003eCheck your projector's model plate against the Eiki, OKI or Sanyo groupings we list, and if you can access your old lamp, compare its printed code against POA-LMP90 or 610-323-0726 to be certain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 610-323-0726 refer to?\u003c\/strong\u003e\u003cbr\u003eIt is an alternative code for this same module, sometimes used in older Sanyo documentation. If your existing lamp carries this marking, POA-LMP90 is still the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the housing included, or do I need to keep my existing one?\u003c\/strong\u003e\u003cbr\u003eThe housing is included. POA-LMP90 is a complete module, so the bulb, housing and connector are supplied together and the old assembly is replaced as one piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith a 200W, 2000 hour rating, how long does this lamp typically last in daily use?\u003c\/strong\u003e\u003cbr\u003e2000 hours is the rated service life under normal use; a projector run for a few hours most days will typically reach that figure within one to two years, though the picture usually dims gradually before then.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182591979756,"sku":"LA-08927","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27161-xl.png?v=1786958892"},{"product_id":"poa-lmp106-projector-lamp-module","title":"POA-LMP106 projector lamp module","description":"\u003cp\u003ePOA-LMP106 covers twenty projectors sold under three names: Eiki, Promethean and Sanyo. That spread runs from Eiki's LC-SB22D and LC-XB24 to Promethean's PRM-XE40 and a long list of Sanyo models in the PLC-XL and PLC-XU series. It runs at 200W with a 1500 hour rated life, matching the lamp originally fitted to each.\u003c\/p\u003e\u003cp\u003eYou may see this lamp marked as 610-332-3855 on older units; that code and POA-LMP106 refer to the same module. Promethean's classroom projectors and Sanyo's PLC-XU range both draw from this shared part, so confirming the exact code on your old lamp is worth doing before ordering, given how many models overlap here.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08946\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 20 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy would a Promethean classroom projector take the same lamp as a Sanyo model?\u003c\/strong\u003e\u003cbr\u003ePromethean sourced its PRM-XE40 projector from the same underlying design as several Sanyo units, and the lamp was carried over unchanged. POA-LMP106 fits both brands for this reason.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 610-332-3855 a different lamp from POA-LMP106?\u003c\/strong\u003e\u003cbr\u003eNo, it is the same module under an older code, sometimes seen on Sanyo units. Either marking on your existing lamp confirms this listing is the correct match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the LC-XB24 and LC-XB24D need different lamps?\u003c\/strong\u003e\u003cbr\u003eNo, both take POA-LMP106. The D suffix on Eiki models in this range typically indicates a different lens or input configuration, not a different lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should I expect POA-LMP106 to last before replacing it?\u003c\/strong\u003e\u003cbr\u003eIt carries a 1500 hour rated life. Picture brightness tends to fade gradually as that figure approaches, which is usually a clearer sign to plan a replacement than waiting for the lamp to fail outright.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering, given how many projectors share this part?\u003c\/strong\u003e\u003cbr\u003eConfirm your exact model against the Eiki, Promethean or Sanyo groupings listed here, and if possible compare the code on your existing lamp with POA-LMP106 or 610-332-3855 before placing your order.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182592733420,"sku":"LA-08946","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/31167-xl.png?v=1786959299"},{"product_id":"003-120377-01-projector-lamp","title":"003-120377-01 bare projector lamp","description":"\u003cp\u003eThree brands drew on the same 330 watt bulb for this generation of projector: Christie fitted it to the LX500, Eiki used it across the LC-SXG400 and LC-XG400 families, and Sanyo built it into the PLC-XT35 and PLC-XT3500 ranges. Rated for 2,000 hours, 003-120377-01 is a bare lamp, so it goes inside whichever housing your projector already carries.\u003c\/p\u003e\u003cp\u003eSanyo's own parts system lists this bulb as POA-LMP116, and it also appears under 610-335-8093 — both describe the identical 003-120377-01 lamp. Since no photo of this specific part is available, rely on the part number and projector list rather than the image when confirming a match. Being a bare lamp, only the bulb changes; the cage stays with the projector.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08671\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 15 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does Sanyo list this lamp as POA-LMP116?\u003c\/strong\u003e\u003cbr\u003ePOA-LMP116 is Sanyo's own code for the same bulb sold here as 003-120377-01. Eiki and Christie use different labelling systems, but the underlying lamp is identical across all three brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Eiki LC-XG400D take the same lamp as the LC-SXG400?\u003c\/strong\u003e\u003cbr\u003eYes. Both the LC-XG400 and LC-SXG400 families, along with their D and L variants, share the single 003-120377-01 bulb, so the same lamp covers every version of these two Eiki model lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before fitting this lamp myself?\u003c\/strong\u003e\u003cbr\u003eConfirm your projector model matches the list on this page, and handle the bulb by its base rather than the glass, since skin oils can shorten the life of a hot-running lamp like this one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a photo of the actual lamp on this listing?\u003c\/strong\u003e\u003cbr\u003eNo, this listing uses a generic image rather than a photo of the specific part, since one is not currently available. The part number and compatibility list remain accurate regardless.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hours is 003-120377-01 rated for?\u003c\/strong\u003e\u003cbr\u003eThis bulb is rated for 2,000 hours at 330 watts, a figure that applies whether it is fitted to the Christie LX500 or any of the listed Eiki or Sanyo models.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182593913068,"sku":"LA-08671","price":70.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"003-120333-01-projector-lamp","title":"003-120333-01 bare projector lamp","description":"\u003cp\u003eAt 330 watts, the 003-120333-01 is one of the higher-powered lamps we stock, built for nine projectors including the Christie LS650 and LX650, the Canon LV-7585 and four Sanyo PLC-XP100 variants. It carries a 2,000-hour rating and ships as a bare lamp for fitting into your projector's own housing. Canon also lists this part as LV-LP29.\u003c\/p\u003e\u003cp\u003eYou'll also see this lamp listed as 610-334-2788 or POA-LMP108, both alternative codes for the same part as 003-120333-01. Given the higher 330-watt rating, make sure your projector's ventilation is clear and its existing housing undamaged before fitting a bare lamp of this size.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08580\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 9 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo projectors take the 003-120333-01?\u003c\/strong\u003e\u003cbr\u003eFour are listed: the PLC-XP100, PLC-XP1000CL, PLC-XP100K and PLC-XP100L. It's also listed for the Canon LV-7585, two Christie models and two Eiki models, nine projectors in total across four brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs POA-LMP108 a different lamp to 003-120333-01?\u003c\/strong\u003e\u003cbr\u003eNo, POA-LMP108 is the same lamp, listed under a Sanyo code. The alternatives 610-334-2788 and LV-LP29 also refer to this same part, so any of the four codes should bring up this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated wattage of this lamp?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 330 watts with a 2,000-hour service life, higher than many of the bare lamps we stock, and this applies across all nine listed projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Christie LX650 need a different lamp to the LS650?\u003c\/strong\u003e\u003cbr\u003eNo, both the Christie LS650 and LX650 are listed for the 003-120333-01, so the same lamp covers either model, along with the Canon LV-7585, two Eiki models and four Sanyo models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen is it time to replace a projector lamp like this one?\u003c\/strong\u003e\u003cbr\u003eA lamp nearing the end of its rated 2,000 hours, or one that's dimmed, flickering or triggered a warning light on the projector, is generally due for replacement. Running hours logged by the projector itself are usually the clearest signal.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182594011372,"sku":"LA-08580","price":155.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"poa-lmp103-projector-lamp-module","title":"POA-LMP103 projector lamp module","description":"\u003cp\u003ePOA-LMP103 fits ten projectors across two brands: Eiki's LC-XB40 and its D, DN and N variants, and Sanyo's DVM-D60M, PLC-XU100 and PLC-XU110. Running at 300W with a 1500 hour rated life, it is one of the higher-output modules in this range, suited to the brighter image these models were designed to produce.\u003c\/p\u003e\u003cp\u003eYou may see this lamp marked as 610-331-6345 on Sanyo units, which is the same part as POA-LMP103. Because the LC-XB40 range has several suffixed variants, and Sanyo lists it under both a projector code and a document viewer code (DVM-D60M), matching the exact code on your old lamp is worth doing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 300 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08950\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo the LC-XB40, LC-XB40D, LC-XB40DN and LC-XB40N all share this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, all four Eiki variants take the same POA-LMP103 module. The suffixes reflect other differences in the projector, such as lens or networking options, rather than a different lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is DVM-D60M listed alongside projector models for this lamp?\u003c\/strong\u003e\u003cbr\u003eDVM-D60M is a Sanyo document viewer that shares the same lamp as the PLC-XU100 and PLC-XU110 projectors, which is why it appears in the same compatibility group.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is 610-331-6345?\u003c\/strong\u003e\u003cbr\u003eIt is Sanyo's own code for this identical module. If your old lamp is marked this way rather than POA-LMP103, this listing is still the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAt 300W, does this lamp run hotter than others in your range?\u003c\/strong\u003e\u003cbr\u003eIt is one of the higher-wattage modules we list, reflecting the brighter output the LC-XB40 and PLC-XU100 series were built around. That is simply the specification these projectors use rather than an unusual figure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I confirm which of the ten listed projectors I actually have?\u003c\/strong\u003e\u003cbr\u003eCheck the model plate on your projector or document viewer, usually on the base or rear panel, and match it against the Eiki LC-XB40 variants or Sanyo models listed here before ordering.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182594273516,"sku":"LA-08950","price":138.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27131-xl.png?v=1786958892"},{"product_id":"lv-lp22-projector-lamp-module","title":"LV-LP22 projector lamp with module","description":"\u003cp\u003eThe High End Systems DL.2 shares its lamp with twenty Canon, Christie, Eiki and Sanyo projectors, all taking the LV-LP22. Supplied as a full module at 300 watts and 1,500 hours rated life, it's also sold under the codes 03-000882-01P, 55030070, 610-314-9127 and POA-LMP81.\u003c\/p\u003e\u003cp\u003eBecause this lamp spans five brands and 21 projectors, don't assume the code alone confirms fitment — check your exact model, whether that's a Canon LV-7565 variant, a Christie LX40 or LX50, or the High End Systems DL.2, against the full list. As a module, the new lamp arrives with its own housing built in.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 300 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08577\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 21 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the High End Systems DL.2 really use a Canon lamp code?\u003c\/strong\u003e\u003cbr\u003eYes, the DL.2 shares its lamp with several Canon, Christie, Eiki and Sanyo projectors. We list the part primarily as LV-LP22, its Canon code, alongside the alternatives POA-LMP81 and 610-314-9127 used by other brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many Sanyo models take the LV-LP22?\u003c\/strong\u003e\u003cbr\u003eTen are listed, including the PLC-XP51, PLC-XP56 and their L-suffixed variants, plus the XP5100 and XP5600. Confirm your exact Sanyo model before ordering given the number of close variants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between LV-LP22 and 55030070?\u003c\/strong\u003e\u003cbr\u003eThere's no difference in the lamp itself — 55030070 is one of several alternative codes recorded against the part we list as LV-LP22, alongside 03-000882-01P, 610-314-9127 and POA-LMP81.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LV-LP22 rated the same across all its listed projectors?\u003c\/strong\u003e\u003cbr\u003eYes, 300 watts and a 1,500-hour service life apply wherever LV-LP22 is fitted, since all 21 listed projectors share the same lamp and module design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I do if my Eiki model isn't listed here?\u003c\/strong\u003e\u003cbr\u003eIf your exact Eiki model doesn't appear among the four listed here — LC-X60, LC-X70, LC-X70D and LMP81 — it's likely built around a different lamp, and fitting LV-LP22 wouldn't be the right match.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182594830572,"sku":"LA-08577","price":244.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20496-xl.png?v=1786955678"},{"product_id":"003-120242-01-projector-lamp","title":"003-120242-01 bare projector lamp","description":"\u003cp\u003eNineteen projectors across three manufacturers use the 003-120242-01 bare lamp: the Christie LX300, LX380, LX450 and their Vivid-branded equivalents, Eiki's LC-XG250 and LC-XG300 families, and Sanyo's PLC-XT20 through PLC-XT25 series. This bulb runs at 300 watts and carries a 2,000 hour rating. Being a bare lamp, it drops into the housing already fitted to your projector.\u003c\/p\u003e\u003cp\u003eSanyo's own reference for this bulb is POA-LMP105, also found under 103-009100-01 or 610-330-7329 — all four codes point to the same 003-120242-01 lamp. No photo of this exact part is currently available, so the listing uses a generic image; the specification and compatibility list are what to check. Only the bulb is replaced, not the surrounding cage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 300 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08669\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 19 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Christie Vivid LX450 the same as the standard LX450 for this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, the Vivid branding does not change the lamp fitted. Both the Christie LX450 and Christie Vivid LX450 take the 003-120242-01 bulb, along with the closely related LX300 and LX380 models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is 103-009100-01?\u003c\/strong\u003e\u003cbr\u003e103-009100-01 is another code used for this same 300 watt bulb, alongside 610-330-7329 and Sanyo's own POA-LMP105 reference. All describe the 003-120242-01 lamp sold here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I tell from the photo whether this lamp fits my projector?\u003c\/strong\u003e\u003cbr\u003eThis listing carries a generic image rather than a photograph of the actual part, so match against the part number and projector list instead of the picture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the Eiki LC-XG250 and LC-XG300 share the same lamp?\u003c\/strong\u003e\u003cbr\u003eYes, both families, including their D and L suffix variants, use the 003-120242-01 bulb, the same one fitted across the related Sanyo PLC-XT range, from the PLC-XT20 through to the PLC-XT25.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the hour rating of the bare 003-120242-01 the same across every listed model?\u003c\/strong\u003e\u003cbr\u003eYes. 003-120242-01 is rated for 2,000 hours running at 300 watts, consistent across every Christie, Eiki and Sanyo model it fits, regardless of which of the nineteen listed projectors you own.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182594961644,"sku":"LA-08669","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"poa-lmp127-projector-lamp-module","title":"POA-LMP127 projector lamp module","description":"\u003cp\u003ePOA-LMP127 fits nineteen projectors across Eiki's LC-XS25, LC-XS30, LC-XS31 and LC-XS525 range, and Sanyo's LP-XC55, LP-XC56 and PLC-XC50 through PLC-XC570C models. It runs at 220W and carries a 4000 hour rated life, longer than many of the lamps in this range, which suits projectors left running for extended periods.\u003c\/p\u003e\u003cp\u003eThis lamp is also referenced as ET-SLMP127 and PLC-XC50A, alongside the older 610-339-8600 code; all four describe the same POA-LMP127 module. With this many Eiki and Sanyo model variants sharing one lamp, checking the exact code on your old unit is a more reliable way to confirm the match than the model name alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 220 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 4,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08972\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 19 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does PLC-XC50A refer to on this listing?\u003c\/strong\u003e\u003cbr\u003eIt is an alternative code Sanyo has used for this same POA-LMP127 module, alongside ET-SLMP127 and 610-339-8600. If your old lamp carries any of these markings, this is still the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the LC-XS25, LC-XS30 and LC-XS31 all take the same lamp?\u003c\/strong\u003e\u003cbr\u003eYes, along with the LC-XS25A, LC-XS25D, LC-XS30D, LC-XS31D and LC-XS525, all nine Eiki variants in this family share the identical POA-LMP127 lamp module, regardless of suffix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the rated life 4000 hours here, longer than some similar modules?\u003c\/strong\u003e\u003cbr\u003e4000 hours reflects the specific lamp Eiki and Sanyo fitted to this LC-XS and PLC-XC generation, longer than some earlier ranges. It is simply the figure confirmed for this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs ET-SLMP127 a Sanyo-specific accessory code rather than the lamp itself?\u003c\/strong\u003e\u003cbr\u003eNo, ET-SLMP127 is another reference for the same lamp module as POA-LMP127, not a separate accessory. Either code confirms the identical part for your PLC-XC or LC-XS projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I be confident I'm choosing the right one of these nineteen projectors?\u003c\/strong\u003e\u003cbr\u003eCheck your projector's model plate against the LC-XS or PLC-XC listings shown here, and where possible compare the code on your existing lamp with POA-LMP127, ET-SLMP127 or PLC-XC50A before ordering.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182595158252,"sku":"LA-08972","price":123.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27166-xl.png?v=1786958891"},{"product_id":"poa-lmp142-projector-lamp-module","title":"POA-LMP142 projector lamp module","description":"\u003cp\u003ePOA-LMP142 is fitted across twenty-six projectors from three brands: Eiki's LC-XBL and LC-XBM ranges, Elmo's CRP-221 and CRP-261, and a wide spread of Sanyo models in the PLC-XD, PLC-XK and PLC-XR series. Rated at 215W with a 5000 hour service life, it is one of the longer-lasting lamps we carry for classroom and lecture projectors.\u003c\/p\u003e\u003cp\u003eYou may also see this part marked 610-349-7518, an alternative code for the identical module. Given how many Eiki, Elmo and Sanyo models this lamp covers, comparing the code on your old bulb against POA-LMP142 or 610-349-7518 is the surest way to confirm the match before you order.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 215 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 5,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08954\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 26 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does Elmo appear on the compatibility list for this Eiki-Sanyo lamp?\u003c\/strong\u003e\u003cbr\u003eElmo's CRP-221 and CRP-261 projectors share the same design and lamp as several Eiki and Sanyo models in this family, which is why POA-LMP142 fits all three brands rather than just one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith twenty-six projectors listed, how do I narrow down which one I have?\u003c\/strong\u003e\u003cbr\u003eStart with the brand printed on your projector, whether Eiki, Elmo or Sanyo, then match the specific model against the LC-XBL, CRP or PLC-X range shown here. Comparing your old lamp's code is a further check if needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is 610-349-7518?\u003c\/strong\u003e\u003cbr\u003eIt is an alternative reference for this same POA-LMP142 module, used in some Sanyo documentation. Either code on your old lamp confirms this listing is the right replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a 5000 hour rating typical for classroom projectors like these?\u003c\/strong\u003e\u003cbr\u003eIt is on the longer side, well suited to projectors that run for extended daily sessions, such as lecture theatres. Some of the office-focused lamps we list are rated for a shorter life than this.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes POA-LMP142 arrive as a full module or just the bulb?\u003c\/strong\u003e\u003cbr\u003eIt is a complete module, with the bulb, housing and connector supplied together at 215W. The old assembly is removed as one piece and the new module fitted in its place.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182595944684,"sku":"LA-08954","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20713-xl.png?v=1786955723"},{"product_id":"poa-lmp132-projector-lamp-module","title":"POA-LMP132 projector lamp module","description":"\u003cp\u003eAcross Eiki, Elmo and Sanyo, twenty-three separate projector models rely on the same POA-LMP132 lamp, among them the Eiki LC-XBL20, the Elmo CRP-22 and Sanyo's PLC-XW and PLC-XR series. It is rated at 220W with a 4000 hour service life, and arrives as a full module rather than a bare bulb.\u003c\/p\u003e\u003cp\u003eSanyo has also documented this part as 610-345-2456, which is the identical lamp under an older reference; either code on your existing unit confirms POA-LMP132 is correct. Because Elmo's CRP-22 and CRP-26 sit alongside so many Eiki and Sanyo names on this list, checking your model plate carefully is worth the extra minute.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 220 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 4,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08952\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 23 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow closely related are the Elmo CRP-22 and CRP-26 to the Eiki LC-XBL range?\u003c\/strong\u003e\u003cbr\u003eClosely enough that they share this identical POA-LMP132 lamp. Elmo, Eiki and Sanyo have each sold versions of the same underlying projector, and the internal lamp was never changed between the three brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 610-345-2456 mean on this listing?\u003c\/strong\u003e\u003cbr\u003eIt is Sanyo's earlier reference for this same POA-LMP132 module. If your existing lamp is marked with that code instead, this listing is still the part you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith so many PLC-XW and PLC-XR variants listed, how specific do I need to be?\u003c\/strong\u003e\u003cbr\u003eFairly specific, since Sanyo's XW200, XW250, XW270C, XW300 and several XR models all appear here, but they all take this one lamp, so once you confirm your model is on the list, POA-LMP132 is correct regardless of which variant it is.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes POA-LMP132 include a new housing?\u003c\/strong\u003e\u003cbr\u003eYes, it is supplied as a complete module with the bulb already fitted into its housing and connector, so the old assembly is removed and replaced as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAt 4000 hours, is this a long-life lamp compared with others you sell?\u003c\/strong\u003e\u003cbr\u003eIt sits on the longer side of the range, suited to projectors used for extended sessions such as classrooms or lecture rooms, though actual life in service depends on how the projector is used day to day.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182597353708,"sku":"LA-08952","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20708-xl.png?v=1786955719"},{"product_id":"003-120338-01-projector-lamp-module","title":"003-120338-01 projector lamp with module","description":"\u003cp\u003eFour manufacturers built projectors around the same lamp assembly: Christie's LX1500, Eiki's LC-XT5 family, several Panasonic PLC-XF47 variants and the closely related Sanyo PLC-XF47 range. Sold here as 003-120338-01, this is a complete module with a 330 watt bulb rated for 2,000 hours. The housing is included, so the full assembly is replaced in one step.\u003c\/p\u003e\u003cp\u003eThis part carries several other names depending on the brand: POA-LMP109 for Sanyo, ET-SLMP109 or 610-334-6267 for Panasonic, and LMP109 more generally — all of them the same 003-120338-01 module. Because it is a module, no separate housing purchase is needed. Match the exact model from your projector's badge against the list above before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08668\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 16 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs POA-LMP109 the Sanyo equivalent of 003-120338-01?\u003c\/strong\u003e\u003cbr\u003eYes, POA-LMP109 is the code Sanyo uses for this same lamp module, alongside LMP109 and the Panasonic references ET-SLMP109 and 610-334-6267, all describing the identical 003-120338-01 part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Eiki LC-XT5A need a different lamp from the LC-XT5?\u003c\/strong\u003e\u003cbr\u003eNo, the LC-XT5, LC-XT5A and LC-XT5D all take the same 003-120338-01 module, along with the Christie LX1500, so the suffix does not affect which lamp to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with this listing — bulb only or the full housing?\u003c\/strong\u003e\u003cbr\u003e003-120338-01 is supplied as a complete module, meaning the bulb and its housing arrive together, ready to replace the entire assembly in one go, without transferring any parts from your old unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many watts is the bulb inside this module?\u003c\/strong\u003e\u003cbr\u003eIt runs at 330 watts and is rated for 2,000 hours, the same specification across every Christie, Eiki, Panasonic and Sanyo model that takes this lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does Panasonic list two different codes, 610 334 6267 and 610-334-6267?\u003c\/strong\u003e\u003cbr\u003eThose are the same code written with and without hyphens; Panasonic's documentation is not always consistent with formatting, but both point to the 003-120338-01 module.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182598107372,"sku":"LA-08668","price":186.74,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25286-xl.png?v=1786958337"},{"product_id":"et-lat100-projector-lamp-module","title":"ET-LAT100 projector lamp module","description":"\u003cp\u003eFour brands, Eiki, Panasonic, Promethean and Sanyo, all sell projectors built around ET-LAT100, twenty-seven models in total. It covers Eiki's LC-WS250, Panasonic's PT-TW230 and PT-XW23ST families, Promethean's PRM30, and a long run of Sanyo PLC-WL2500 and PLC-WL2503 variants, making it one of the most widely shared lamps we list.\u003c\/p\u003e\u003cp\u003eBecause so many brands have documented this lamp separately, it carries an unusually long list of alternative codes, including POA-LMP140, POA-LMP141, PRM30-LAMP and 610-349-0847; all of these point to the same ET-LAT100 module. Given the spread of names involved, matching the exact code on your old lamp is the most reliable way to order correctly.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08943\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 27 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does this one lamp cover four completely different projector brands?\u003c\/strong\u003e\u003cbr\u003eEiki, Panasonic, Promethean and Sanyo have each sold rebadged versions of the same underlying projector design, and ET-LAT100 is the lamp common to all of them, from the Eiki LC-WS250 to the Promethean PRM30.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre POA-LMP140 and POA-LMP141 the same lamp, or different ones?\u003c\/strong\u003e\u003cbr\u003eIn our listings both codes are associated with this same ET-LAT100 module. If your old lamp is marked with either number, this listing is still the part to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is PRM30-LAMP?\u003c\/strong\u003e\u003cbr\u003eIt is Promethean's own code for this identical module, used specifically on the PRM30 and PRM30A. If your Promethean projector's old lamp carries this marking, ET-LAT100 is the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith twenty-seven projectors listed across four brands, how do I confirm my exact model?\u003c\/strong\u003e\u003cbr\u003eStart with the brand on your projector's case, then match the model against the Eiki, Panasonic, Promethean or Sanyo groupings shown here. Checking the code on your existing lamp against the alternatives listed adds a further layer of confidence.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't a wattage or lamp life shown for ET-LAT100?\u003c\/strong\u003e\u003cbr\u003eWe only publish figures once they are confirmed for a specific part, and that has not been confirmed here, so we leave it out rather than state an estimate that might not hold across all twenty-seven projectors.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182598074604,"sku":"LA-08943","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20698-xl.png?v=1786955723"},{"product_id":"lv-lp19-projector-lamp-module","title":"LV-LP19 projector lamp with module","description":"\u003cp\u003eTwelve Eiki models alone are listed for the LV-LP19, from the LC-SB15 to the LC-XB26D, alongside three Canon LV-5200-series units, the Christie LX25a and nine Sanyo models. Supplied as a full module at 200 watts and rated for 1,500 hours, it's also known as POA-LMP65 and 610-307-7925.\u003c\/p\u003e\u003cp\u003eWith 25 compatible projectors, this is one of the more widely fitted lamps we carry, so take a moment to match your exact Eiki or Sanyo model, since both ranges include several closely named variants. The module design means the new housing arrives already built around the lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08565\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 25 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy are there so many Eiki models listed for LV-LP19?\u003c\/strong\u003e\u003cbr\u003eEiki built twelve models around this same lamp, from the LC-SB15 through to the LC-XB26D, which is why so many of its projectors share the LV-LP19 across our list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs POA-LMP65 the Sanyo code for this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, POA-LMP65 is Sanyo's code for the same lamp we list as LV-LP19. The alternatives 03-000754-02P and 610-307-7925 also refer to this part, all fitting the same 25 listed projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the rated life of the LV-LP19?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 1,500 hours running at 200 watts, a figure that holds across all 25 listed projectors from Canon, Christie, Eiki and Sanyo, whichever brand's code you order it under.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Christie LX25a share its lamp with Canon models?\u003c\/strong\u003e\u003cbr\u003eYes, the Christie LX25a is listed alongside three Canon LV-5200-series projectors and several Eiki and Sanyo models, all taking the same LV-LP19 lamp at 200 watts and 1,500 hours rated life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do alternative lamp codes come about?\u003c\/strong\u003e\u003cbr\u003eWhen several brands sell projectors built around the same underlying lamp, each brand tends to issue it under its own part number. LV-LP19, POA-LMP65, 03-000754-02P and 610-307-7925 are one such set, all naming the same physical lamp.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182598205676,"sku":"LA-08565","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/30815-xl.png?v=1786959291"},{"product_id":"poa-lmp111-projector-lamp-module","title":"POA-LMP111 projector lamp with module","description":"\u003cp\u003ePOA-LMP111 identifies a 275-watt, 3,000-hour lamp supplied complete with its housing, ready to drop into place. It's the part specified for a wide spread of models sold under the Sanyo, Eiki and Dongwon badges, including the D95M, DLP-845 and LC-XB43 series, and covers 43 projectors in total across the three brands.\u003c\/p\u003e\u003cp\u003eThe same lamp also carries the code 610-333-9740, so if your projector's manual or a supplier's listing shows that number instead, it points to this product rather than a different part. Because this version includes the module, no separate housing purchase is needed; check your projector model against the list above before ordering to be sure the fit is right.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08937\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 43 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich projectors take the POA-LMP111 lamp?\u003c\/strong\u003e\u003cbr\u003eIt's fitted across 43 projector models sold under the Sanyo, Eiki and Dongwon names, among them the Sanyo PLC-XU101, the Eiki LC-XB42 and the Dongwon DLP-945S. Check your exact model number against the compatibility list on this page, since a close model name is not always a guaranteed match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 610-333-9740 a different lamp to POA-LMP111?\u003c\/strong\u003e\u003cbr\u003eNo, it's the same lamp listed under an alternative code. Some projector manuals and older parts catalogues reference 610-333-9740 rather than POA-LMP111, but both numbers point to this exact product, so either code will bring you to the right listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the POA-LMP111 need parts transferred from my old assembly?\u003c\/strong\u003e\u003cbr\u003eNo. This is the module version, so the lamp arrives already fitted into its housing rather than as a loose bulb. It is built to go straight into the projector in place of the original assembly without any transfer of parts between old and new housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should the POA-LMP111 lamp last?\u003c\/strong\u003e\u003cbr\u003eThe lamp is rated at 3,000 hours of use, running at 275 watts. Actual life depends on how the projector is used, including how often it is switched on and off and whether it runs in a high-brightness mode, so treat the figure as a guide rather than a guarantee.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat homework should Dongwon or Sanyo owners do before buying the POA-LMP111?\u003c\/strong\u003e\u003cbr\u003eConfirm your projector's exact model number against the compatibility list, since Sanyo, Eiki and Dongwon each sold several closely related models under this lamp. If your unit already has a lamp fitted with the code POA-LMP111 or 610-333-9740 on its label, this listing is the correct match.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182599188716,"sku":"LA-08937","price":146.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20694-xl.png?v=1786955717"},{"product_id":"003-120507-01-projector-lamp","title":"003-120507-01 bare projector lamp","description":"\u003cp\u003eFew lamps in our range fit as widely as 003-120507-01: it is listed against 37 separate projectors, from the Christie LW555 and LX605 through Eiki's large LC-WXL200 and LC-XL200 families to Sanyo's PLC-WM5500 and PLC-ZM5000 ranges, plus the Panasonic ET-SLMP136. It is a bare 330 watt bulb rated for 3,000 hours, and it fits inside your projector's existing housing.\u003c\/p\u003e\u003cp\u003eSanyo's reference for this bulb is POA-LMP136, also found as 610-346-9607 — both describe the same 003-120507-01 lamp sold here. Because the compatibility list is unusually long, it is worth checking your exact model string carefully, since Eiki alone lists more than a dozen closely named LC-XL200 and LC-WXL200 variants. No photo of this specific part is available, so the listing uses a generic image.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08659\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 37 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does this lamp fit so many different projectors?\u003c\/strong\u003e\u003cbr\u003eChristie, Eiki, Panasonic and Sanyo all built projectors around the same lamp engine during this period, which is why one bulb, 003-120507-01, covers 37 separate models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is POA-LMP136?\u003c\/strong\u003e\u003cbr\u003ePOA-LMP136 is Sanyo's own reference for this bulb, the same lamp listed here as 003-120507-01 and also found under the code 610-346-9607, regardless of which brand's projector it fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWith so many similar Eiki model names, how do I pick the right one?\u003c\/strong\u003e\u003cbr\u003eCheck the exact suffix on your projector's badge — A, L, Ai, AL, DL and i variants of the LC-XL200 and LC-WXL200 all appear separately in the list above, so match the full string rather than just the base model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSince there's no photo, how can I be sure this is the right lamp?\u003c\/strong\u003e\u003cbr\u003eThis listing uses a generic image because no photograph of the actual part is available, so rely on the part number and the projector compatibility list rather than the picture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is this bulb rated to run?\u003c\/strong\u003e\u003cbr\u003e003-120507-01 is rated for 3,000 hours at 330 watts, a specification that holds across all 37 listed projectors, whichever of the four brands they come from.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182599450860,"sku":"LA-08659","price":213.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"poa-lmp148-projector-lamp-module","title":"POA-LMP148 projector lamp with module","description":"\u003cp\u003eThe code POA-LMP148 covers a complete lamp and housing module built for ten projector models shared between Eiki and Sanyo, among them the Eiki LC-XB250 and the Sanyo PLC-XU4000. Wattage and rated life are not published for this part, so specification is limited to fit and compatibility rather than a power or hours figure.\u003c\/p\u003e\u003cp\u003eSome suppliers list this same lamp under the code 610-352-7949; if that is what your projector's manual shows, it refers to this product. Because the module is included, there is no housing to source separately, so match your projector model against the list above and order by whichever of the two codes you have to hand.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08935\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat projectors use the POA-LMP148 module?\u003c\/strong\u003e\u003cbr\u003eIt fits ten models split between Eiki and Sanyo, including the Eiki LC-WB200A and the Sanyo LP-XU4000. Because several closely named models share this part, it's worth checking your projector's exact model number against the list on this page rather than assuming a similar name is a match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy doesn't this listing show a wattage or lamp life?\u003c\/strong\u003e\u003cbr\u003eThose figures are not published for this part, so we have left them out rather than guess. Everything else about the lamp, including which projectors it fits and how it is supplied, is confirmed and listed here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 610-352-7949 the same lamp as POA-LMP148?\u003c\/strong\u003e\u003cbr\u003eYes, it is the same product under a second code. Some Eiki and Sanyo documentation uses 610-352-7949, while parts catalogues more often show POA-LMP148; both numbers lead to this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the POA-LMP148 come as a module or a bare bulb?\u003c\/strong\u003e\u003cbr\u003eThis listing is the module version, meaning the lamp is already built into its housing. It is designed to be swapped in as a complete unit rather than requiring the old housing to be reused with a new bulb inside it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can LC-WB200 owners verify the POA-LMP148 fits before ordering?\u003c\/strong\u003e\u003cbr\u003eMatch your projector's model number against the Eiki and Sanyo models listed on this page. If the lamp currently fitted carries either POA-LMP148 or 610-352-7949 on its label, this is the correct replacement.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182599942380,"sku":"LA-08935","price":137.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27540-xl.png?v=1786959007"},{"product_id":"poa-lmp115-projector-lamp-module","title":"POA-LMP115 projector lamp with module","description":"\u003cp\u003eRated at 220 watts and 3,000 hours, POA-LMP115 is supplied here with its housing as a single module, ready to fit in place of the original assembly. Twenty projector models across the Eiki and Sanyo ranges take this part, from the Eiki LC-XB31 to the Sanyo PLC-XU88W.\u003c\/p\u003e\u003cp\u003eA bare version of this same lamp is sold separately under the code 610-334-9565, without the housing, for cases where the existing housing is still in good condition. This listing is the module, so it replaces the entire assembly; choose the bare option instead only if you plan to reuse your current housing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 220 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08948\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 20 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many projectors take the POA-LMP115 lamp?\u003c\/strong\u003e\u003cbr\u003eTwenty models across Eiki and Sanyo use this part, including the Eiki LC-XB33D and the Sanyo PLC-XU9000C. Given the number of shared models, check your projector's exact model number against the list on this page before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between this listing and the 610-334-9565 lamp?\u003c\/strong\u003e\u003cbr\u003eThey are the same lamp; this listing is the module, with the bulb already fitted into a housing, while 610-334-9565 is sold as the bare lamp only. Choose whichever matches whether you need a new housing or are reusing your existing one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated life of the POA-LMP115?\u003c\/strong\u003e\u003cbr\u003eIt is rated at 3,000 hours running at 220 watts. This is the manufacturer's stated figure under standard operating conditions; actual lamp life varies with how the projector is used day to day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any tools to fit a module lamp?\u003c\/strong\u003e\u003cbr\u003eMost projectors take a module lamp through an access panel secured with one or two screws, so a screwdriver is usually all that's needed. Always power down and unplug the projector first, and let it cool before opening the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the housing already fitted on this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, this listing is the complete module, so the bulb is factory-fitted into its housing and arrives ready to install as a single unit, with nothing to transfer from your old assembly.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182600728812,"sku":"LA-08948","price":122.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20703-xl.png?v=1786955726"},{"product_id":"610-315-5647-projector-lamp-module","title":"610-315-5647 projector lamp with module","description":"\u003cp\u003eTwo Canon models, the LV-X4 and LV-X4E, share the 610-315-5647 with two Sanyo models, the PLC-XU4000C and PLC-XU41. It's a module-style lamp, housing included, and Sanyo lists the same part under the code POA-LMP79. No wattage or hours figure is published for it.\u003c\/p\u003e\u003cp\u003eIf you've seen this lamp listed as POA-LMP79, that's Sanyo's own code for the same part as 610-315-5647. With four compatible projectors across two brands, confirm your exact model name before ordering, since Canon and Sanyo each use their own numbering for the same physical lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08593\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs POA-LMP79 the same as 610-315-5647?\u003c\/strong\u003e\u003cbr\u003eYes, POA-LMP79 is Sanyo's code for the same lamp we list primarily as 610-315-5647. It's the part fitted to both the Canon LV-X4\/X4E and the Sanyo PLC-XU4000C\/XU41.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo models take this lamp?\u003c\/strong\u003e\u003cbr\u003eTwo are listed: the PLC-XU4000C and the PLC-XU41. It's also listed for two Canon models, the LV-X4 and LV-X4E, four projectors in total for this lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't a wattage listed for the 610-315-5647?\u003c\/strong\u003e\u003cbr\u003eWe only publish specification figures we hold on file, and neither a wattage nor an hours rating is recorded for this lamp. Compatibility with the four listed projectors is still confirmed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between the Canon LV-X4 and LV-X4E?\u003c\/strong\u003e\u003cbr\u003eBoth take the same 610-315-5647 lamp, so for lamp-ordering purposes there's no difference between the two; check your model plate to confirm which one you have for your own records.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes a module lamp need the old housing to be in good shape?\u003c\/strong\u003e\u003cbr\u003eNo — a module like 610-315-5647 replaces the housing along with the bulb, so it doesn't depend on the condition of the housing already in your projector.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182600990956,"sku":"LA-08593","price":53.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/37897-xl.png?v=1786965838"}],"url":"https:\/\/www.lampsauthority.com\/collections\/sanyo-projector-lamps.oembed","provider":"Lamps Authority","version":"1.0","type":"link"}