{"title":"JVC projector lamps","description":"\u003cp\u003eReplacement projector lamps for JVC projectors — 23 lamps catalogued. Available as bare lamps (the bulb alone, fitted into the housing already in your projector) and as complete modules (bulb and housing together, ready to drop straight in).\u003c\/p\u003e\u003cp\u003eEvery lamp carries a genuine Philips, Osram or Ushio burner, ships free worldwide, and is covered by a 180-day guarantee. If you are not sure which your projector takes, check the code on the old lamp or send us a photo of the label.\u003c\/p\u003e","products":[{"product_id":"elplp12-projector-lamp","title":"ELPLP12 bare projector lamp","description":"\u003cp\u003eThis bulb covers a wide spread of Epson EMP and Powerlite 5600, 7600 and 7700 models, the equivalent A+K EMP units and the JVC LX-D3000Z and LX-D3000ZU. ELPLP12 is supplied bare, at 200W and 1500 hours rated life, so it goes into the housing you already have rather than arriving as a full module.\u003c\/p\u003e\u003cp\u003eEpson's own part number for this lamp is V13H010L12, so either code points to the same bulb. Being a bare lamp, remember to keep your current housing when the old bulb is removed, since this replacement fits inside it rather than replacing it.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-07867\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 20 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp sold with a housing?\u003c\/strong\u003e\u003cbr\u003eNo, ELPLP12 is bare, the bulb only. You fit it into the housing already inside your projector, so keep that housing to hand rather than discarding it with the old lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes ELPLP12 fit JVC projectors as well as Epson?\u003c\/strong\u003e\u003cbr\u003eYes. It is listed for the JVC LX-D3000Z and LX-D3000ZU as well as the Epson EMP, ELP and Powerlite 5600\/7600\/7700 range and the equivalent A+K EMP models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is V13H010L12?\u003c\/strong\u003e\u003cbr\u003eIt is Epson's own part number for the same lamp we list as ELPLP12. Both codes describe the identical bulb, so either can be used when confirming compatibility with your projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow rugged is a bare lamp during fitting?\u003c\/strong\u003e\u003cbr\u003eHandle the glass envelope by its edges or base rather than the bulb itself, and avoid fitting it while the projector or the bulb is still warm from previous use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is ELPLP12 rated to last?\u003c\/strong\u003e\u003cbr\u003eIt carries a 1500-hour rating at 200W. Treat that figure as a planning guide for replacement rather than a fixed cut-off, since actual lamp life varies with how the projector is used.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182565470444,"sku":"LA-07867","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"sp-lamp-lp4-projector-lamp-module","title":"SP-LAMP-LP4 projector lamp with module","description":"\u003cp\u003eSP-LAMP-LP4 is a complete lamp and housing module built for JVC's DLA-NX and DLA-RS home cinema projectors, along with the PK-L2618U and PK-L2618UW. It covers ten listed models, from the DLA-NP5 through to the DLA-RS3000, giving one part number to match across that range rather than hunting for a bulb-only equivalent.\u003c\/p\u003e\u003cp\u003eThis is the only part number we list for SP-LAMP-LP4, so there is nothing to cross-reference against alternative codes here. Because it ships as a complete module, no housing work is needed: the old assembly comes out and this one goes straight in. Confirm your exact projector model against the list above before ordering, since ten different JVC models share this same lamp module.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12248\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes SP-LAMP-LP4 fit both the DLA-NX5 and the DLA-NX9?\u003c\/strong\u003e\u003cbr\u003eYes. SP-LAMP-LP4 is listed against the DLA-NX5, DLA-NX7 and DLA-NX9, as well as the DLA-NP5 and the DLA-RS1000 through DLA-RS3000 models, so the same module covers JVC's NX and RS ranges without needing a different part number for each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the same lamp as the one used in the PK-L2618U?\u003c\/strong\u003e\u003cbr\u003eSP-LAMP-LP4 and the PK-L2618U cover an overlapping set of projectors, including the DLA-NP5 and DLA-NX range, but they are listed here as separate part numbers. Order SP-LAMP-LP4 for the models shown above rather than assuming the two are interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does JVC's SP-LAMP-LP4 show just one reference number?\u003c\/strong\u003e\u003cbr\u003eSP-LAMP-LP4 is the only code we hold for this module, with no alternative numbers recorded against it. If your projector documentation shows a different code, check it against the model list above rather than the part number alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this module include the lamp housing?\u003c\/strong\u003e\u003cbr\u003eYes. SP-LAMP-LP4 is supplied as a complete module, meaning the bulb and its housing arrive as one assembly. You remove the existing module from the projector and fit this one in its place, with no separate housing to source.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich JVC models use this lamp besides the DLA-RS3000?\u003c\/strong\u003e\u003cbr\u003eThe same SP-LAMP-LP4 module is listed for the DLA-NP5, DLA-NX5, DLA-NX7, DLA-NX9, DLA-RS1000, DLA-RS1100, DLA-RS2000, plus the PK-L2618U and PK-L2618UW, so it spans both JVC's consumer NX line and the PK-L range.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182574612716,"sku":"LA-12248","price":170.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/37624-xl.png?v=1786965797"},{"product_id":"pk-l3310u-projector-lamp-module","title":"PK-L3310U projector lamp module","description":"\u003cp\u003ePK-L3310U is a complete lamp module for three JVC projectors: the DLA-SH7NL, DLA-SH7NLG and DLA-VS4800. Rather than a bare bulb, it arrives as a full housing assembly, so fitting is a case of swapping the whole unit for the one already in the projector, without handling the bulb separately.\u003c\/p\u003e\u003cp\u003ePK-L3310U is the only part number we hold for this module, with no alternative codes recorded. Because JVC's SH7NL and VS4800 series are close relatives, double-check your exact model and revision before ordering, since projectors that look alike do not always share a lamp assembly.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09325\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes PK-L3310U fit the DLA-SH7NLG as well as the DLA-SH7NL?\u003c\/strong\u003e\u003cbr\u003eYes, both are listed for this module, along with the DLA-VS4800. All three share the same PK-L3310U lamp and housing assembly, so one part number covers the group.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs PK-L3310U a bare bulb or a full module?\u003c\/strong\u003e\u003cbr\u003eIt is supplied as a full module, meaning the lamp and its housing arrive together. You are not required to transfer the bulb into an existing housing; the assembly fits into the projector as a single unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering PK-L3310U for a DLA-VS4800?\u003c\/strong\u003e\u003cbr\u003eConfirm the model plate reads DLA-VS4800, DLA-SH7NL or DLA-SH7NLG, since these are the only three projectors this part number is listed against here, so it is worth checking twice if your unit could be any of the three.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBesides PK-L3310U, is there any other reference for this JVC module?\u003c\/strong\u003e\u003cbr\u003eNo. PK-L3310U is the only code recorded for this module in our listing, so there is no alternative number to cross-check against your projector's specification plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are there only three projectors listed for this lamp?\u003c\/strong\u003e\u003cbr\u003ePK-L3310U is a lower-volume module built specifically for JVC's SH7NL and VS4800 projectors, a smaller family than some of JVC's other lamp part numbers that span dozens of models.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182575530220,"sku":"LA-09325","price":407.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/33833-xl.png?v=1786962598"},{"product_id":"pk-l2313u-projector-lamp-module","title":"PK-L2313U projector lamp with module","description":"\u003cp\u003eFour JVC projectors are listed against PK-L2313U: the DLA-VS2200, DLA-VS2200G, DLA-VS2200ZG and the PK-L2313UP. This version is supplied as a full lamp and housing module, so the complete assembly is replaced as one unit rather than transferring a bulb into the existing housing.\u003c\/p\u003e\u003cp\u003eA bare-bulb version of this same PK-L2313U lamp is also listed separately for the VS2200 range, without the PK-L2313UP projector included in its compatibility. Choose the module if you would rather not handle the old housing, and check your projector's exact suffix, G or ZG, before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09326\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this listing and the bare PK-L2313U lamp?\u003c\/strong\u003e\u003cbr\u003eThis listing is the full module, with the bulb pre-fitted into a housing. The bare version listed separately is the bulb only, intended for reuse in your projector's existing housing, and it covers three rather than four projector models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes PK-L2313U fit the DLA-VS2200ZG as well as the standard VS2200?\u003c\/strong\u003e\u003cbr\u003eYes, the DLA-VS2200, DLA-VS2200G and DLA-VS2200ZG are all listed for this module, along with the PK-L2313UP, so the suffix does not change which lamp is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs PK-L2313UP a different projector or another name for the same lamp?\u003c\/strong\u003e\u003cbr\u003ePK-L2313UP is a projector model, not a lamp code; it is one of the four projectors this PK-L2313U module is listed against, alongside the three DLA-VS2200 variants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to reset a lamp timer after fitting this module?\u003c\/strong\u003e\u003cbr\u003eMost JVC projectors expect the lamp timer to be reset from the on-screen menu after a replacement, so that hour counts and warnings start again from zero, though the exact menu path varies by model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCould my DLA-VS2200's lamp be listed under a code other than PK-L2313U?\u003c\/strong\u003e\u003cbr\u003eNo alternative codes are recorded against PK-L2313U in our listing, so this is the only part number to check against your projector's specification plate or service documentation.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182576447724,"sku":"LA-09326","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20986-xl.png?v=1786956261"},{"product_id":"pk-l2313u-projector-lamp","title":"PK-L2313U bare projector lamp","description":"\u003cp\u003eThis is the bare-bulb version of PK-L2313U, covering the DLA-VS2200, DLA-VS2200G and DLA-VS2200ZG. Unlike the module listing for the same part number, this option does not include a housing, so it is intended for projectors where the existing housing is still in good condition and only the bulb needs replacing.\u003c\/p\u003e\u003cp\u003eWe also list PK-L2313U as a full module elsewhere, which additionally covers the PK-L2313UP projector and includes a new housing. Choose the bare lamp here only if you are confident about handling the bulb and fitting it into your current housing yourself; otherwise the module is the simpler option.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09327\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does this bare lamp cover fewer projectors than the module version?\u003c\/strong\u003e\u003cbr\u003eThe module listing for PK-L2313U also includes the PK-L2313UP projector, while this bare-bulb listing covers only the DLA-VS2200, DLA-VS2200G and DLA-VS2200ZG. Both use the same underlying lamp, but the compatibility lists differ between the two listings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs opening the JVC housing to fit a bare PK-L2313U a job for a home user?\u003c\/strong\u003e\u003cbr\u003eIt can be, if you are comfortable working inside the projector. Fitting a bare lamp means opening the existing housing, removing the old bulb, seating this one in its place, and closing the housing again, which is more involved than swapping a complete module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I get a fresh cage with the bare PK-L2313U, or just the bulb?\u003c\/strong\u003e\u003cbr\u003eJust the bulb. This is the bare PK-L2313U only; the housing from your projector is reused, so there is nothing to discard except the old lamp itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat condition should my existing housing be in before I fit a bare lamp?\u003c\/strong\u003e\u003cbr\u003eThe housing should be free of cracks, with its retaining clips and connector intact, since it will hold this new bulb going forward. If the housing itself is damaged, the module version of PK-L2313U would be the better choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bare lamp fit the PK-L2313UP projector?\u003c\/strong\u003e\u003cbr\u003eNo, PK-L2313UP is not listed against this bare-bulb version. It appears only in the module listing for PK-L2313U, so if you have that model, order the module rather than the bare lamp.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182577332460,"sku":"LA-09327","price":224.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/24819-lg.png?v=1786958282"},{"product_id":"bhl-5010-s-projector-lamp","title":"BHL-5010-S bare projector lamp","description":"\u003cp\u003eBHL-5010-S is a 200W bare lamp rated for 3000 hours of use, shared by JVC's DLA-HD and DLA-RS home cinema projectors and by the Anthem LTX 500. With 34 projectors listed against it, this is one of the more widely used lamp codes in JVC's older home cinema range.\u003c\/p\u003e\u003cp\u003eBecause no photo is held for this specific bulb, rely on the part number and projector list above rather than appearance when confirming a match. This is a bare lamp, so it fits inside your existing housing; a housing-included module using the same BHL-5010-S code is also listed separately if you would rather replace the whole assembly.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08090\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 34 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the Anthem LTX 500 really use the same lamp as JVC's DLA-RS models?\u003c\/strong\u003e\u003cbr\u003eYes. BHL-5010-S is listed against the Anthem LTX 500 alongside more than thirty JVC DLA-HD and DLA-RS projectors, so the same lamp assembly serves both brands' equivalent models from this generation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long do BHL-5010-S bulbs generally run in JVC's DLA range?\u003c\/strong\u003e\u003cbr\u003eThe part is rated for 3000 hours at 200W, the figures recorded against this number. Actual life in use will depend on how the projector is run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't there a product photo for this lamp?\u003c\/strong\u003e\u003cbr\u003eThis particular BHL-5010-S listing uses a generic image rather than a photo of the specific unit, so use the part number and the projector list above to confirm fit rather than the picture shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich JVC projector families use BHL-5010-S besides the RS range?\u003c\/strong\u003e\u003cbr\u003eAlongside the DLA-RS10 through DLA-RS35 models, BHL-5010-S is also listed for the earlier DLA-HD250 to DLA-HD990 range and the DLA-20U, covering both the HD and RS naming generations JVC used for this projector family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a module version of this lamp available instead of the bare bulb?\u003c\/strong\u003e\u003cbr\u003eYes, BHL-5010-S is also listed as a complete module with a new housing included, covering the same 34 projectors. This bare-lamp listing is for reuse in your existing housing instead.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182578512108,"sku":"LA-08090","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"bhl-5010-s-projector-lamp-module","title":"BHL-5010-S projector lamp and module","description":"\u003cp\u003eThis module pairs a 200W BHL-5010-S lamp, rated for 3000 hours, with a new housing, ready to fit into any of the 34 listed projectors. That list runs from JVC's DLA-HD250 through the DLA-RS35U, and includes the Anthem LTX 500, a projector that shares this lamp module.\u003c\/p\u003e\u003cp\u003eIf your current housing is undamaged, the bare-lamp version of BHL-5010-S covers the same 34 projectors at a lower cost, since you are not paying for a new housing. Choose this module instead if the housing has cracked, if a clip has broken, or if you would simply rather fit a complete assembly.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08091\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 34 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with this module that the bare lamp does not?\u003c\/strong\u003e\u003cbr\u003eThis listing includes a new housing built around the BHL-5010-S lamp, so you fit a complete assembly rather than transferring a bulb into your existing housing. The bare-bulb version of BHL-5010-S is listed separately without the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Anthem LTX 500 take the same module as JVC's DLA-RS30?\u003c\/strong\u003e\u003cbr\u003eYes, both are listed against this BHL-5010-S module, along with more than thirty other JVC DLA-HD and DLA-RS projectors, so the same complete assembly fits either model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should this lamp last before it needs replacing?\u003c\/strong\u003e\u003cbr\u003eBHL-5010-S is rated for 3000 hours at 200W. Once your projector's lamp timer approaches that figure, or picture brightness drops noticeably, it is worth planning a replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a photo of the actual module for this listing?\u003c\/strong\u003e\u003cbr\u003eYes, a specific photo is held for this module listing, unlike the bare-lamp version of the same part number, which currently uses a generic image instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich older JVC models take this same lamp?\u003c\/strong\u003e\u003cbr\u003eBHL-5010-S covers JVC's DLA-20U and the DLA-HD250 through DLA-HD990 range, as well as the DLA-RS10 through DLA-RS35U models, spanning several years of JVC's home cinema line-up under this one part number.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182579396844,"sku":"LA-08091","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/33632-xl.png?v=1786962500"},{"product_id":"hd-ila-projector-lamp-module","title":"HD-ILA projector lamp module","description":"\u003cp\u003eHD-ILA is the lamp module listed for JVC's large rear-projection televisions, covering 69 models across the HD-52, HD-56, HD-61 and HD-70 series, plus the HD-P61 and HD-P70 projection units and the HD-Z56, HD-Z61 and HD-Z70 range. It is one of the widest-fitting lamp codes in our JVC listings.\u003c\/p\u003e\u003cp\u003eThe same lamp also appears under several other codes, including BHL-5101-S, HD52G647 and the TS-CL110 family: TS-CL110, TS-CL110C, TS-CL110U, TS-CL110UAA and TS-CL111UAA. If your old lamp or projector manual shows one of these instead of HD-ILA, it is the same part, so order against the model list above to be sure.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11306\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 69 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs BHL-5101-S the same lamp as HD-ILA?\u003c\/strong\u003e\u003cbr\u003eYes, BHL-5101-S is one of several alternative codes recorded for this same lamp, alongside HD52G647 and the TS-CL110 family. Whichever code appears on your old lamp or in your projector's manual, this listing is the match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does this lamp cover so many JVC television models?\u003c\/strong\u003e\u003cbr\u003eThis same lamp assembly is listed across 69 rear-projection television models spanning the HD-52, HD-56, HD-61 and HD-70 series over several product generations, which is why the compatibility list here is longer than most of our other JVC lamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between TS-CL110 and TS-CL111UAA?\u003c\/strong\u003e\u003cbr\u003eBoth are alternative part numbers listed against this same HD-ILA lamp, alongside TS-CL110C, TS-CL110U and TS-CL110UAA. They refer to the identical lamp assembly rather than to different products, so any of these codes should match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit the HD-Z70RX5 rear-projection television?\u003c\/strong\u003e\u003cbr\u003eYes, the HD-Z70RX5 is listed here alongside the HD-Z56RX5 and HD-Z61RF7, as part of the wider HD-ILA compatibility list that also covers the HD-52, HD-56, HD-61 and HD-70 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector shows the code HD52G647 — is this the right lamp?\u003c\/strong\u003e\u003cbr\u003eYes, HD52G647 is recorded as an alternative number for this same HD-ILA module, so ordering against this listing will supply the correct lamp for that code.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182580576492,"sku":"LA-11306","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34473-xl.png?v=1786962734"},{"product_id":"et-lac50-projector-lamp-module","title":"ET-LAC50 projector lamp module","description":"\u003cp\u003eET-LAC50 is a lamp module used by both JVC and Panasonic, fitting JVC's LX-P1010, LX-P1010U, LX-P1010ZE and LX-P1010ZU alongside Panasonic's PT-LC50, PT-LC50E, PT-LC70, PT-LC150 and PT-LC170. Nine projectors across the two brands share this one part number here, rather than needing separate codes for each manufacturer.\u003c\/p\u003e\u003cp\u003eYou may also see this lamp listed as BHNPETLAC50, PT-LC50U or PT-LC70U; all three are alternative codes for the same ET-LAC50 module here. It arrives as a complete lamp and housing assembly, so check your projector's exact model suffix, such as LC50 against LC50E, before placing an order.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10982\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 9 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does a Panasonic projector need a JVC-branded lamp code?\u003c\/strong\u003e\u003cbr\u003eET-LAC50 is not JVC-branded as such; it is the shared part number for a lamp used across both brands. JVC's LX-P1010 range and Panasonic's PT-LC series share this same ET-LAC50 lamp code, which is why one part number covers projectors from both manufacturers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs PT-LC50U the same as PT-LC50?\u003c\/strong\u003e\u003cbr\u003ePT-LC50U is recorded as an alternative code for this ET-LAC50 lamp, alongside PT-LC70U and BHNPETLAC50. The base PT-LC50 and PT-LC70 models themselves appear directly in the projector compatibility list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes ET-LAC50 fit the Panasonic PT-LC170?\u003c\/strong\u003e\u003cbr\u003eYes, the PT-LC170 is listed here along with the PT-LC150, PT-LC50, PT-LC50E and PT-LC70, so all five Panasonic models share this same lamp module as JVC's LX-P1010 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering for a JVC LX-P1010?\u003c\/strong\u003e\u003cbr\u003eConfirm whether your unit is the base LX-P1010, or the LX-P1010U, LX-P1010ZE or LX-P1010ZU variant, since all four are listed against ET-LAC50 here and the suffix does not change which lamp is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp sold as a bare bulb anywhere in your range?\u003c\/strong\u003e\u003cbr\u003eNot under this listing. ET-LAC50 here is supplied as a complete lamp and housing module for the nine JVC and Panasonic projectors shown above, with no separate bare-bulb version currently listed for this part number.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182581362924,"sku":"LA-10982","price":142.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/24858-xl.png?v=1786958299"},{"product_id":"dla-rs48u-projector-lamp-module","title":"DLA-RS48U projector lamp module","description":"\u003cp\u003eRated at 230W, DLA-RS48U is the lamp module behind a large stretch of JVC's home cinema line-up, from the DLA-RS46 and DLA-RS49 through to the DLA-RS67, and across the DLA-X35 to DLA-X900R models. With 41 projectors listed, this is among the most widely fitting JVC lamps we carry.\u003c\/p\u003e\u003cp\u003eThis same lamp also appears under codes including DLA-RS4910U, PK-L2310U, PK-L2312U and PK-L2312UP, among others listed against this part number. Check your projector's exact model, including any RB, RW or E suffix, against the list above before ordering, since JVC's naming across this generation can look very similar between models.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 230 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09323\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 41 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs PK-L2312U the same lamp as DLA-RS48U?\u003c\/strong\u003e\u003cbr\u003eYes, PK-L2312U is one of several alternative codes recorded for this same 230W module, alongside PK-L2310U, PK-L2312U-G and DLA-RS4910U. All refer to the identical lamp listed here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit both the DLA-X35 and the DLA-X900R?\u003c\/strong\u003e\u003cbr\u003eYes, both are listed against DLA-RS48U, along with the DLA-X500R, DLA-X700R, DLA-X55R and DLA-X75R models, spanning JVC's entire X-series naming range from the smallest to the largest number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many watts does the DLA-RS48U module run at?\u003c\/strong\u003e\u003cbr\u003eDLA-RS48U is a 230W lamp. No hours figure is recorded against this specific part number in our listing, so check your projector's own manual for its expected service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes DLA-RS48U fit the JVC Europe DLA-X500RBE model?\u003c\/strong\u003e\u003cbr\u003eYes, the JVC Europe DLA-X500RBE is listed here alongside the standard DLA-X500R, DLA-X500RB, DLA-X500RBU and DLA-X500RW variants, so the region-specific model takes the same lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eI have a JVC PK-L2312UG projector — is this the right lamp?\u003c\/strong\u003e\u003cbr\u003eYes, PK-L2312UG is listed directly against DLA-RS48U, so this module is the correct match for that model as well as for the wider DLA-RS and DLA-X ranges shown above.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182582542572,"sku":"LA-09323","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20975-xl.png?v=1786956262"},{"product_id":"pk-l2210u-projector-lamp-module","title":"PK-L2210U projector lamp module","description":"\u003cp\u003ePK-L2210U is rated at 220W with a 3000-hour life, and is listed against 31 JVC projectors spanning the DLA-RS40 to DLA-RS65U models and the DLA-X3 through DLA-X90 range, including the DLA-F110 and DLA-VS2100 variants. It arrives as a full lamp and housing module ready to fit.\u003c\/p\u003e\u003cp\u003eThe same lamp is also listed under PK-L2210UP and JVC-PK-L2210UP, so if either of those codes appears on your old lamp, this is the correct replacement. With 31 projectors sharing this part number, take care to match your exact model, particularly between the closely named DLA-X3, DLA-X3B and DLA-X3W.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 220 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09320\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 31 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated life of PK-L2210U?\u003c\/strong\u003e\u003cbr\u003ePK-L2210U is a 220W lamp rated for 3000 hours. Once your projector nears that figure on its internal counter, it is a reasonable point to plan a replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit the DLA-F110 as well as the RS and X series?\u003c\/strong\u003e\u003cbr\u003eYes, the DLA-F110 is listed here alongside the DLA-RS40 to DLA-RS65U models and the DLA-X3 to DLA-X90 range, so all of these share the same PK-L2210U module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs JVC-PK-L2210UP a different lamp from PK-L2210U?\u003c\/strong\u003e\u003cbr\u003eNo, JVC-PK-L2210UP and PK-L2210UP are both alternative codes recorded for this same PK-L2210U module, not separate products, so ordering against this listing covers either code.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes PK-L2210U fit the DLA-VS2100NL?\u003c\/strong\u003e\u003cbr\u003eYes, the DLA-VS2100NL is listed here along with the DLAVS2100 and DLAVS2100P variants, as part of the wider PK-L2210U compatibility list covering 31 JVC projectors in total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this module different from a bare replacement bulb?\u003c\/strong\u003e\u003cbr\u003eThis PK-L2210U listing supplies a complete lamp and housing assembly, so you replace the whole unit inside the projector rather than opening the housing to swap just the bulb.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182583394540,"sku":"LA-09320","price":119.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20961-xl.png?v=1786956262"},{"product_id":"dla-x770-projector-lamp-module","title":"DLA-X770 projector lamp module","description":"\u003cp\u003eDLA-X770 is a 265W lamp rated for 3500 hours, supplied as a complete module for JVC's higher-end home cinema projectors. The 35 listed models run from the DLA-RS400 up to the DLA-RS640, and from the DLA-X5000 through to the DLA-X9500 and DLA-X9900BE, plus two JVC Europe models.\u003c\/p\u003e\u003cp\u003eThis same lamp is also listed as DLA-X770R, DLA-RS440U, DLA-RS540K, DLA-RS640K, PK-L2615U and several further codes, so cross-check any of those against this listing if that is what appears on your current lamp. As a module, it includes a new housing, so there is nothing to transfer from the old assembly.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 265 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09322\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 35 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated wattage and life of DLA-X770?\u003c\/strong\u003e\u003cbr\u003eDLA-X770 runs at 265W and is rated for 3500 hours, figures that apply across all 35 projectors listed against this module, from the DLA-RS400 to the DLA-X9900BE.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit the JVC Europe DLA-X7000BE?\u003c\/strong\u003e\u003cbr\u003eYes, both JVC Europe models, the DLA-X5000BE and DLA-X7000BE, are listed here alongside the standard DLA-X5000 and DLA-X7000, so the European variants take the same DLA-X770 module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs DLA-X770R a separate lamp from DLA-X770?\u003c\/strong\u003e\u003cbr\u003eNo, DLA-X770R is recorded as an alternative code for this same module, not a different lamp. It most likely corresponds to the DLA-X770R projector model rather than a distinct part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes DLA-X770 fit the DLA-RS540 and the DLA-RS640?\u003c\/strong\u003e\u003cbr\u003eYes, both the DLA-RS540 and DLA-RS640 are listed here, along with the DLA-RS400, DLA-RS420, DLA-RS440, DLA-RS500 and DLA-RS600, covering JVC's RS400 to RS640 generation in full.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering for a DLA-X950R?\u003c\/strong\u003e\u003cbr\u003eConfirm your model reads DLA-X950R rather than a similarly numbered variant, since this is one of 35 projectors listed against DLA-X770 and close model numbers can be easy to mix up when ordering.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182584443116,"sku":"LA-09322","price":141.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20971-xl.png?v=1786956264"},{"product_id":"pk-l2618u-projector-lamp","title":"PK-L2618U bare projector lamp","description":"\u003cp\u003ePK-L2618U is a bare-bulb lamp listed for twelve JVC projectors, including the DLA-NP5, DLA-NX5, DLA-NX7 and DLA-NX9, the DLA-RS1000 through DLA-RS4100 models, and the PK-L2618UW. It supplies the bulb only, for fitting into the housing already inside your projector rather than as a complete replacement assembly.\u003c\/p\u003e\u003cp\u003eA separate SP-LAMP-LP4 module is listed for a similar, though not identical, set of JVC projectors and includes a new housing; that is worth considering if your current housing is damaged. For this bare PK-L2618U lamp, no alternative part numbers are recorded, so match your model carefully against the list above.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12203\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 12 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs PK-L2618U the same lamp as SP-LAMP-LP4?\u003c\/strong\u003e\u003cbr\u003eThey are listed separately here, covering an overlapping but not identical set of JVC projectors. PK-L2618U is the bare bulb, while SP-LAMP-LP4 is a complete module, so check which one matches your projector and your preferred fitting method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes PK-L2618U fit the DLA-RS2100 and DLA-RS3100?\u003c\/strong\u003e\u003cbr\u003eYes, both are listed here, along with the DLA-RS1000, DLA-RS1100, DLA-RS2000, DLA-RS3000 and DLA-RS4100, so this bare lamp covers JVC's full RS1000 to RS4100 generation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need any tools to fit a bare bulb like this?\u003c\/strong\u003e\u003cbr\u003eFitting a bare lamp means opening your projector's existing housing, so you will typically need a screwdriver to release the housing and the bulb retaining screws. Handle the bulb by its base rather than the glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit the PK-L2618UW as well as the PK-L2618U projector code?\u003c\/strong\u003e\u003cbr\u003eYes, the PK-L2618UW is listed here directly, alongside the DLA-NP5, DLA-NX and DLA-RS1000 to RS4100 models, so both projector codes take this same bare lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is there no module version listed under this same PK-L2618U code?\u003c\/strong\u003e\u003cbr\u003eWe list this lamp only as a bare bulb under the PK-L2618U code. A related module, SP-LAMP-LP4, is listed separately for a similar set of JVC projectors if you would prefer a complete housing assembly instead.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182585491692,"sku":"LA-12203","price":242.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34365-lg.png?v=1786962716"},{"product_id":"bhl-5009-s-projector-lamp-module","title":"BHL-5009-S projector lamp with module","description":"\u003cp\u003eBHL-5009-S is a 200W lamp module listed across both JVC and Pioneer projectors: JVC's DLA-HD1, DLA-HD100, DLA-RS1 and DLA-RS2 ranges, and Pioneer's ELITE PRO-FPJ1, FPJ-1 and KRF-9000FD. With 25 projectors in total, it is one of the few lamps in our range shared openly between two brands.\u003c\/p\u003e\u003cp\u003eThis same lamp also appears as DLA-HD10, DLA-VS2000, BHL-5009-S(P) and PioneerElitePRO-FPJ1, so check any of these against your old lamp or projector documentation. It ships as a complete module, so there is no separate housing to source once you have confirmed your exact model against the list above.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09321\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 25 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does a Pioneer projector share a lamp code with JVC?\u003c\/strong\u003e\u003cbr\u003ePioneer's ELITE PRO-FPJ1, FPJ-1 and KRF-9000FD are listed against this same BHL-5009-S module as JVC's DLA-HD1 and DLA-RS1 ranges, so the same lamp assembly serves projectors from both brands in this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs PioneerElitePRO-FPJ1 a different code from the ELITE PRO-FPJ1 in the projector list?\u003c\/strong\u003e\u003cbr\u003ePioneerElitePRO-FPJ1 is recorded as an alternative part code for this lamp, referring to the same Pioneer ELITE PRO-FPJ1 projector that appears directly in the compatibility list above.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes BHL-5009-S fit the JVC DLA-HD100?\u003c\/strong\u003e\u003cbr\u003eYes, the DLA-HD100 is listed here alongside the DLA-HD1, DLA-HD1-BE, DLA-HD1-BU and DLA-HD1WE variants, as part of the wider BHL-5009-S compatibility list, which also extends to Pioneer's ELITE PRO-FPJ1 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage is this lamp rated at?\u003c\/strong\u003e\u003cbr\u003eBHL-5009-S runs at 200W. No hours figure is recorded against this specific part number here, so refer to your projector's own documentation for expected service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs DLA-HD10 the same lamp as DLA-VS2000?\u003c\/strong\u003e\u003cbr\u003eBoth DLA-HD10 and DLA-VS2000 are listed as alternative codes for this same BHL-5009-S module, rather than as separate lamps, alongside BHL-5009-S(P) and PioneerElitePRO-FPJ1, so any of these codes point back to this one listing.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182586605804,"sku":"LA-09321","price":119.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/33607-xl.png?v=1786962501"},{"product_id":"vlt-x120lp-projector-lamp-module","title":"VLT-X120LP projector lamp with module","description":"\u003cp\u003eVLT-X120LP is a lamp-and-housing module used across five brands that rebadged the same underlying projector: the Dukane Image Pro 8700, JVC LX-D1000, Mitsubishi LVP-S120, LVP-X120E, S120 and X120E, the Polaroid Polaview 235 and 335, and the Telex P1000. Mitsubishi's own engineering underpins all nine listed models.\u003c\/p\u003e\u003cp\u003eWith nine model names spread across five brands, the safest step is to confirm the exact designation on your projector's badge rather than assuming brand alone decides fit. This module includes the housing, so it fits as one complete unit without needing a separate cage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10787\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 9 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp code span so many brands?\u003c\/strong\u003e\u003cbr\u003eMitsubishi built the original projector design that this lamp serves, and Dukane, JVC, Polaroid and Telex each sold their own badged version of the same hardware, so all nine listed models share VLT-X120LP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes VLT-X120LP fit the Mitsubishi S120 as well as the LVP-S120?\u003c\/strong\u003e\u003cbr\u003eYes, S120 and LVP-S120 refer to the same Mitsubishi model under slightly different naming, and both take this lamp, along with X120E and LVP-X120E, which follow the same pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector is a Polaroid Polaview 335, is this the right lamp?\u003c\/strong\u003e\u003cbr\u003eYes, the Polaview 335 is one of the two Polaroid models this lamp covers, alongside the Polaview 235, both sharing the identical VLT-X120LP module and housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the housing part of this module?\u003c\/strong\u003e\u003cbr\u003eYes, the lamp arrives already fitted into its housing, so VLT-X120LP installs as a single complete assembly rather than a bulb for an existing cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check if my JVC projector isn't the LX-D1000?\u003c\/strong\u003e\u003cbr\u003eIf your JVC model has a different name, this lamp is unlikely to be the correct match; VLT-X120LP is currently listed against the LX-D1000 specifically.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182593618156,"sku":"LA-10787","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23803-xl.png?v=1786957080"},{"product_id":"rlc-103-projector-lamp-module","title":"RLC-103 projector lamp with module","description":"\u003cp\u003eRLC-103 is an unusually widely shared lamp module, fitted across nineteen projectors spanning BenQ, JVC and Viewsonic, including the Viewsonic PG800 series and the JVC LX-FH50. It's supplied complete with housing, so it drops straight into any of the compatible units without needing a separate bulb transfer.\u003c\/p\u003e\u003cp\u003eBecause so many projector names map to this single lamp, several alternate codes appear on old documentation too, among them 5J.JDP05.001 and PK-L3715U, all of them describing the same RLC-103 module. If your projector isn't listed by name, checking the code on your existing lamp against any of these is the reliable way to confirm fit.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11687\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 19 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp code cover projectors from three different brands?\u003c\/strong\u003e\u003cbr\u003eBenQ, JVC and Viewsonic sometimes rebadge the same underlying projector hardware for different markets, which is why they end up sharing an identical lamp assembly and part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eI have a Viewsonic PRO8530HDL, is RLC-103 definitely the right lamp?\u003c\/strong\u003e\u003cbr\u003eYes, the PRO8530HDL is one of the models this module covers, along with several other Viewsonic PRO88 and PG800 series units listed in this compatibility group.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat do the alternate codes like PK-L3715UW refer to?\u003c\/strong\u003e\u003cbr\u003eThey're other names the same RLC-103 lamp has been sold under across different catalogues and regions. All of them are the identical module listed here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector model isn't one of the exact names shown, what should I do?\u003c\/strong\u003e\u003cbr\u003eCheck the part number printed on your current lamp or in the projector's menu. If it matches RLC-103 or any of the alternate codes listed, this module is the correct fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes fitting this module involve any wiring or soldering?\u003c\/strong\u003e\u003cbr\u003eNo, it's a plug-in assembly that seats into the lamp bay and connects through the same connector the original lamp used, secured with the projector's existing retaining screws.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182629204204,"sku":"LA-11687","price":274.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/33847-xl.png?v=1786962595"},{"product_id":"pk-l3310u-projector-lamp","title":"PK-L3310U bare projector lamp","description":"\u003cp\u003eThe PK-L3310U is a bare lamp built for the JVC DLA-SH7NLG, a projector also sold under the Philips model reference 9281 288 05390. Only these two projector names are recorded against this part, and the bulb is fitted into your existing housing rather than arriving as a full replacement module.\u003c\/p\u003e\u003cp\u003ePK-L3310U is the only part number we have on file for this lamp, so it is the code to use whether your unit carries the JVC or the Philips branding. Since it ships bare, keep the old housing and connector to hand, as the new bulb is transferred into that same assembly during fitting.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09324\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy is this lamp listed under both JVC and Philips?\u003c\/strong\u003e\u003cbr\u003eThe JVC DLA-SH7NLG was also sold under the Philips reference 9281 288 05390, and both use the identical PK-L3310U lamp, so a single listing covers both brand names.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PK-L3310U come with a new housing?\u003c\/strong\u003e\u003cbr\u003eNo, it is a bare lamp. The bulb alone is replaced, and it is fitted into the housing already installed in your JVC or Philips-branded projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs PK-L3310U the part number I should search for on my old lamp?\u003c\/strong\u003e\u003cbr\u003eYes, check the label on your existing lamp or the projector's specification sheet for PK-L3310U, since that is the only code we have recorded for this fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering, given only two projectors are listed?\u003c\/strong\u003e\u003cbr\u003eConfirm your unit's model plate reads either JVC DLA-SH7NLG or Philips 9281 288 05390, as this lamp is not recorded as compatible with any other projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know when the PK-L3310U needs replacing?\u003c\/strong\u003e\u003cbr\u003eWatch for a dimmer picture, a flickering image, or a lamp-life warning shown by the projector itself, as these are the usual signs that the bulb inside is nearing the end of its working life.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182645129452,"sku":"LA-09324","price":345.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20980-lg.png?v=1786956266"},{"product_id":"109823-projector-lamp","title":"109823 bare projector lamp","description":"\u003cp\u003ePart number 109823 identifies a bare 150-watt lamp rated for 2,000 hours, built for the long-running Mitsubishi LVP-S50 and LVP-X70 families as well as the JVC LX-D1010, Polaroid Polaview range and Saville AV projectors. It is the bulb alone, meant for housings that are still in good condition.\u003c\/p\u003e\u003cp\u003eYou may also see this lamp listed as VLT-X70LP, or under the Polaroid codes PV238 and PV338 — all refer to the same part. A module version of this lamp is also available under the same 109823 number for anyone whose existing housing is cracked or worn, so check which one your projector actually needs before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-07877\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 25 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this lamp and the module version?\u003c\/strong\u003e\u003cbr\u003eThis listing is the bare bulb only, for reuse in an existing housing. A separate 109823 module listing pairs the same bulb with a new housing, which is worth choosing instead if your current cage is cracked, discoloured or missing parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 109823 fit the Mitsubishi X51U?\u003c\/strong\u003e\u003cbr\u003eYes, the Mitsubishi LVP-X51U and X51U are both listed among the compatible projectors for this lamp, along with the wider LVP-S50 to LVP-X70 range. Check your unit's model plate to confirm the exact suffix before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs PV238 the same lamp as 109823?\u003c\/strong\u003e\u003cbr\u003ePV238 is a Polaroid code for the same underlying lamp used in the Polaview 238 and 238i projectors. If your Polaroid unit's manual quotes PV238 or PV338, this 109823 listing is the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit a bare lamp safely?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully before opening the lamp compartment, then handle the bulb by its housing edges rather than the glass, since skin oils can shorten its life. Follow your projector's manual for the release catches and orientation before sliding the new lamp into place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I replace a lamp like this one?\u003c\/strong\u003e\u003cbr\u003eReplace it once your projector reports the lamp hours are exhausted, the image dims noticeably, or the lamp fails to strike on power-up. Running a lamp well past its rated hours increases the risk of it failing suddenly rather than dimming gradually.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182649028844,"sku":"LA-07877","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32761-lg.png?v=1786962266"},{"product_id":"109823-projector-lamp-module","title":"109823 projector lamp with module","description":"\u003cp\u003eWhere the bare 109823 bulb needs an existing housing, this version supplies bulb and housing together as one complete module, so it suits projectors whose current cage is damaged or simply unavailable separately. It fits the same Mitsubishi LVP-S50 to LVP-X70 range, along with the JVC LX-D1010, Polaroid Polaview and Saville AV models, at 150 watts and 2,000 hours.\u003c\/p\u003e\u003cp\u003eThe same lamp also carries the codes VLT-X70LP and 499B022-10, so any of these three numbers on your old part or projector manual point to this listing. Choose the module over the bare bulb whenever your existing housing shows cracks, missing clips or scorch marks, since a damaged cage can affect how the lamp seats and cools.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-07878\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 25 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does 499B022-10 refer to?\u003c\/strong\u003e\u003cbr\u003e499B022-10 is an alternative part number for this same 109823 lamp module. If that code appears on your old lamp's label, this listing is the matching replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose the module instead of the bare 109823 lamp?\u003c\/strong\u003e\u003cbr\u003eChoose the module if your projector's existing housing is cracked, warped or has broken retaining clips, since the bare bulb alone will not fix a damaged cage. The module gives you a fresh housing and bulb together in one part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Saville projectors take this lamp?\u003c\/strong\u003e\u003cbr\u003eThe Saville AV x-800 and AV x-1100 both use this lamp. Confirm the exact model printed on your projector's rear panel, as Saville badged several ranges with similar names over the years.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I order the correct part when several codes exist?\u003c\/strong\u003e\u003cbr\u003eCheck the number printed on your old lamp's label or your projector's parts manual, then match it against the codes we list — 109823, VLT-X70LP and 499B022-10 all refer to this same lamp — to be sure you order the right one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before fitting this module?\u003c\/strong\u003e\u003cbr\u003eConfirm the projector is unplugged and fully cooled, then check that the module's connector orientation matches the socket inside the lamp bay before pushing it fully home. Forcing a module in the wrong orientation can damage the connector pins.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182649815276,"sku":"LA-07878","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34317-xl.png?v=1786962721"},{"product_id":"elplp12-projector-lamp-module","title":"ELPLP12 projector lamp with module","description":"\u003cp\u003eJVC, A+K and Epson all specify this same ELPLP12 module for their larger-venue projectors, including the Epson EMP-5600, EMP-7600 and EMP-7700 series, the A+K EMP-5600P and EMP-7700P, and the JVC LX-D3000Z. Rated at 200 watts and 1,500 hours, it arrives as a complete bulb-and-housing unit ready to fit.\u003c\/p\u003e\u003cp\u003eThe alternative code V13H010L12 refers to this same lamp, so either number confirms you have found the right part. Because this is a module rather than a bare bulb, it is worth checking your projector's lamp bay first — if it holds a loose bulb with no separate cage, a bare-lamp listing would be the wrong choice.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-07868\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 20 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes ELPLP12 fit the Epson Powerlite 7700P?\u003c\/strong\u003e\u003cbr\u003eYes, the Epson Powerlite 7700P is among the listed compatible models, alongside the Powerlite 5600, 5600P, 7600 and 7600P. Confirm the exact suffix on your projector's rating label before placing an order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are there two codes, ELPLP12 and V13H010L12?\u003c\/strong\u003e\u003cbr\u003eEpson uses V13H010L12 as an internal part reference for the same lamp marketed as ELPLP12, so the two numbers describe one identical product. Either code on your old lamp confirms this is the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this lamp in a JVC projector?\u003c\/strong\u003e\u003cbr\u003eYes, it is listed as compatible with the JVC LX-D3000Z and LX-D3000ZU. JVC's larger installation projectors from this era shared lamp modules with equivalent Epson and A+K models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reset the lamp hours after installing this module?\u003c\/strong\u003e\u003cbr\u003eAccess your projector's on-screen menu after fitting the new module and look for a lamp or maintenance section with a reset option. The exact wording and menu depth vary between Epson, A+K and JVC firmware versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the safest way to handle a new lamp module?\u003c\/strong\u003e\u003cbr\u003eKeep the module in its packaging until the projector is cool and ready, then lift it by the housing rather than any exposed bulb glass. Avoid touching the glass directly, as oils from skin can cause uneven heating in use.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182651060460,"sku":"LA-07868","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23409-xl.png?v=1786957039"},{"product_id":"elplp05-projector-lamp","title":"ELPLP05 bare projector lamp","description":"\u003cp\u003eFour different projector brands built models around the same 120-watt bulb, so the ELPLP05 turns up under Ask, Epson, Geha and JVC badging alike. It is rated for 2000 hours and supplied bare, meaning it fits inside the housing already in your Ask A8, Epson ELP-7300, Geha compact 650 or JVC LX-D1020, among 37 listed models.\u003c\/p\u003e\u003cp\u003eThis same bulb is also sold as ELPLP09, and both V13H010L05 and V13H010L09 point to it too, so do not be put off if a parts list quotes a different one of those four codes. As a bare lamp it assumes your housing is undamaged; if you are unsure, inspect the reflector for cracks before fitting.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08092\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 37 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does the same lamp cover Ask, Epson, Geha and JVC projectors?\u003c\/strong\u003e\u003cbr\u003eThese brands sold rebadged versions of the same projector chassis, built around an identical optical engine and bulb. The ELPLP05 was the lamp specified for all of them, which is why one product covers four different brand names.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs ELPLP09 a different lamp from ELPLP05?\u003c\/strong\u003e\u003cbr\u003eNo, they are the same lamp listed under two part codes. Different manuals and suppliers settled on different numbering over the years, but both codes describe this identical 120-watt bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector is a Geha compact 660+ -- is that covered?\u003c\/strong\u003e\u003cbr\u003eYes. The compact 660 and 660+ are both listed as compatible, along with the 565, 565+, 650 and 650+ models in the Geha range, so any of these Geha units take this same lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I choose bare or a lamp with module for my Ask A9+?\u003c\/strong\u003e\u003cbr\u003eChoose bare if the housing currently in your projector is undamaged and you only need a fresh bulb. If the housing itself is cracked, discoloured or the fitting has failed, a version with a new module is the safer choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before fitting this lamp myself?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully and unplug it first, then handle the bulb by its housing edges rather than the glass, since skin oils can shorten its life. Confirm the lamp door is fully seated before powering the unit back on.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182653550828,"sku":"LA-08092","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32724-lg.png?v=1786962264"},{"product_id":"elplp05-projector-lamp-module","title":"ELPLP05 projector lamp with module","description":"\u003cp\u003eThis ELPLP05 lamp arrives already fitted into its housing, ready to drop into any of the Ask, Epson, Geha or JVC projectors that share this optical platform. It is a 150-watt bulb rated for 2000 hours, covering the same 37 models as the bare version, from the Ask A8+ through to the JVC LX-D1020.\u003c\/p\u003e\u003cp\u003eIf you already own a working housing, the bare ELPLP05 avoids paying for a module you do not need; this complete version suits anyone whose housing is worn, cracked, or being fitted for the first time. Suppliers also reference this lamp as ELPLP09, V13H010L05 or V13H010L09, all of which describe the same part.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08094\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 37 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy would I pick the module version over the bare lamp?\u003c\/strong\u003e\u003cbr\u003eThe module version includes a new housing, so it is worth the extra cost if your existing housing shows cracks, a damaged fitting, or general wear. If your current housing is sound, the bare lamp alone is the cheaper route.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit the Epson ELP-7250L specifically?\u003c\/strong\u003e\u003cbr\u003eYes, the ELP-7250L is listed among the compatible Epson models for this lamp, alongside the standard ELP-7250, the EMP-7250 and the Powerlite 7250 equivalents sold under the same range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other part numbers I should recognise for this lamp?\u003c\/strong\u003e\u003cbr\u003eThis lamp is also catalogued as ELPLP09, V13H010L05 and V13H010L09. If a projector manual or an old order confirmation quotes any of those, it refers to the same product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs fitting a module version harder than a bare lamp?\u003c\/strong\u003e\u003cbr\u003eIt is generally easier, since the bulb is already seated correctly inside its housing. You remove the old module as a single unit and insert this one, without handling the bare burner yourself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat counts as the 'original' spec for this lamp?\u003c\/strong\u003e\u003cbr\u003eIt means the bulb matches the wattage and rated hours the projector was designed around -- 150 watts, 2000 hours -- rather than a lower-powered substitute sold as compatible. It is a statement about the specification, not the manufacturer.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182654238956,"sku":"LA-08094","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28962-xl.png?v=1786959181"},{"product_id":"jvc-lx-uh1-projector-lamp-module","title":"JVC LX-UH1 projector lamp with module","description":"\u003cp\u003eNo manufacturer part number is recorded for this lamp, so we list it by the projector it fits: the JVC LX-UH1. The same module also covers the LX-UH1B and LX-UH1W variants, plus the PK-L2417U, four projectors in total, and arrives as a complete lamp and housing assembly rather than a bare bulb.\u003c\/p\u003e\u003cp\u003eBecause there is no part number to check here, identifying your projector correctly matters more than usual: confirm the model reads LX-UH1, LX-UH1B, LX-UH1W or PK-L2417U before ordering. No alternative codes are recorded for this lamp, so the projector list above is the only way to confirm a match.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does JVC's LX-UH1 lamp appear here without a reference code?\u003c\/strong\u003e\u003cbr\u003eWe do not hold a manufacturer part number for this particular lamp, so it is listed here by the projector it fits, the JVC LX-UH1, rather than by a code. The projector model list above is the way to confirm compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit the LX-UH1B and LX-UH1W as well as the base LX-UH1?\u003c\/strong\u003e\u003cbr\u003eYes, all three variants, the LX-UH1, LX-UH1B and LX-UH1W, are listed against this same module, along with the PK-L2417U, so the colour or region suffix does not change which lamp is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the PK-L2417U a lamp code or a projector model?\u003c\/strong\u003e\u003cbr\u003ePK-L2417U is a projector model here, one of four listed for this lamp module, alongside the JVC LX-UH1, LX-UH1B and LX-UH1W, rather than a separate part number for the lamp itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing include a housing or just the bulb?\u003c\/strong\u003e\u003cbr\u003eThis is a complete module, so a housing is included along with the lamp. You fit the whole assembly into the projector rather than opening the existing housing to change just the bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there alternative part numbers I should check for this lamp?\u003c\/strong\u003e\u003cbr\u003eNo alternative codes are recorded for this module, since no primary part number exists for it either. Match your projector model against the LX-UH1, LX-UH1B, LX-UH1W and PK-L2417U list above instead.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182671409388,"sku":"LA-12313","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/37636-xl.png?v=1786965797"}],"url":"https:\/\/www.lampsauthority.com\/collections\/jvc-projector-lamps.oembed","provider":"Lamps Authority","version":"1.0","type":"link"}