{"title":"Jector projector lamps","description":"\u003cp\u003eReplacement projector lamps for Jector projectors — 26 lamps catalogued. Available as bare lamps (the bulb alone, fitted into the housing already in your projector) and as complete modules (bulb and housing together, ready to drop straight in).\u003c\/p\u003e\u003cp\u003eEvery lamp carries a genuine Philips, Osram or Ushio burner, ships free worldwide, and is covered by a 180-day guarantee. If you are not sure which your projector takes, check the code on the old lamp or send us a photo of the label.\u003c\/p\u003e","products":[{"product_id":"jp840wx-lamp-projector-lamp-module","title":"JP840WX-LAMP projector lamp with module","description":"\u003cp\u003eJector's JP840WX and JP840XSP both take the same lamp, the JP840WX-LAMP, supplied here as a complete module with the bulb pre-fitted inside its housing. There's a single part number on record for this lamp, so there's no alternative code to cross-check before ordering.\u003c\/p\u003e\u003cp\u003eIf you're not sure whether your projector is the JP840WX or the JP840XSP, either model takes this identical module, so the distinction doesn't affect which lamp to order. Because the housing is included, you swap the entire assembly rather than fitting a bare bulb into an old carrier.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09306\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the JP840XSP need a different lamp from the JP840WX?\u003c\/strong\u003e\u003cbr\u003eNo, both models share the identical JP840WX-LAMP module, so the same order is correct for either projector, with no separate listing required for the XSP variant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp sold with a housing or as a bare bulb?\u003c\/strong\u003e\u003cbr\u003eIt's the complete module, arriving with the bulb already mounted inside its housing, so installation is a matter of swapping the whole assembly rather than fitting a loose bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other part numbers I should check for Jector's JP840 series?\u003c\/strong\u003e\u003cbr\u003eNo, JP840WX-LAMP is the only code on record for this module, with no alternative numbers to cross-reference before ordering for either the JP840WX or JP840XSP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I be sure my Jector projector is one of these two models?\u003c\/strong\u003e\u003cbr\u003eCheck the model badge on your projector's casing reads JP840WX or JP840XSP. Either name confirms this module is the correct fit for your unit before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill I need to reset the lamp timer on my Jector projector?\u003c\/strong\u003e\u003cbr\u003eMany projectors track lamp hours and prompt a reset from the on-screen menu once a new module is fitted, so check your JP840 series settings after installation.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182572876012,"sku":"LA-09306","price":119.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"jp830x-lamp-projector-lamp","title":"JP830X-LAMP bare projector lamp","description":"\u003cp\u003eJector's JP822X and JP830X projectors both take the JP830X-LAMP, a single lamp shared across the pair despite their different model names. This bare version is sold without a housing, so you fit the bulb into the carrier already installed in your projector.\u003c\/p\u003e\u003cp\u003eThere's just the one part number for this lamp, so there's nothing else to check beyond confirming your projector reads JP822X or JP830X. Because no housing ships with a bare bulb, examine your current one for cracks or a worn socket before fitting the replacement.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09303\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do the JP822X and JP830X share a part number that only mentions the 830X?\u003c\/strong\u003e\u003cbr\u003eJector lists the same lamp assembly against both models, and the part is simply named after the JP830X. It fits the JP822X equally, despite the naming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a module version of this lamp available too?\u003c\/strong\u003e\u003cbr\u003eYes, the same JP830X-LAMP part number is also available as a complete module elsewhere in our catalogue if you'd rather replace the housing as well as the bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check on my existing housing before fitting a bare bulb?\u003c\/strong\u003e\u003cbr\u003eLook for cracks in the casing, a damaged reflector or a loose socket. A worn housing can shorten the working life of even a fresh bulb once fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my projector is a JP822X rather than a JP830X?\u003c\/strong\u003e\u003cbr\u003eCheck the model badge printed on the unit's casing. Either name is fine for this listing, since both take the identical lamp and fit the same way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there alternative part numbers for the JP830X-LAMP?\u003c\/strong\u003e\u003cbr\u003eNo, this is the only code on record for the lamp, so there's no second number to match against your old bulb before placing your order.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182573793516,"sku":"LA-09303","price":270.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"jp830x-lamp-projector-lamp-module","title":"JP830X-LAMP projector lamp with module","description":"\u003cp\u003eFor anyone who'd rather replace the whole assembly, this is the module version of the JP830X-LAMP, fitting both the Jector JP822X and JP830X. The bulb arrives already mounted in its own housing, so there's no need to inspect or reuse your current carrier.\u003c\/p\u003e\u003cp\u003eThe part number is the same whether you're fitting the JP822X or the JP830X, since Jector lists this lamp against both. Choosing the module over the bare bulb makes sense if your existing housing shows wear, since you get a fresh one with every fitting.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the benefit of buying the module instead of the bare bulb for the JP830X?\u003c\/strong\u003e\u003cbr\u003eThe module gives you a fresh housing along with the bulb, which is worth choosing if your current housing is cracked, discoloured or has a worn socket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this module fit the JP822X even though the part is named after the JP830X?\u003c\/strong\u003e\u003cbr\u003eYes, Jector lists the same lamp assembly for both, so the JP830X-LAMP module fits the JP822X equally well without any adjustment needed on your part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a bare-bulb version if I don't need a new housing?\u003c\/strong\u003e\u003cbr\u003eYes, the same JP830X-LAMP code is also listed as a bare bulb elsewhere in our catalogue for anyone keeping their existing housing in place and in good condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill I need to reset a lamp counter after installing this module?\u003c\/strong\u003e\u003cbr\u003eMany projectors prompt a lamp-hour reset from the on-screen menu once a new module is fitted, so check your JP822X or JP830X settings after installation is complete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I check I'm ordering the right lamp for my Jector projector?\u003c\/strong\u003e\u003cbr\u003eConfirm your model badge reads JP822X or JP830X. Either name is correct for this listing, since both share the identical module and housing supplied here.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182574514412,"sku":"LA-09304","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"jp640-lmp-projector-lamp-module","title":"JP640-lmp projector lamp with module","description":"\u003cp\u003eThe JP640-lmp is a complete replacement unit for the Jector JP640, pairing a fresh lamp with its own housing so the whole assembly slides into place. It is built for this single projector model, which keeps fitting straightforward: there is no bulb-to-housing matching to work out, no separate cage to source, and no guesswork about compatibility.\u003c\/p\u003e\u003cp\u003eJP640-lmp is the only code linked to this fixture in our records, so ordering is a matter of matching that string against what is printed on your old lamp or its housing label. Because this is the module version, you will remove the entire cage as one unit rather than handling a bare bulb, which keeps installation simple for anyone doing it themselves.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11370\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill the JP640-lmp fit any Jector projector other than the JP640?\u003c\/strong\u003e\u003cbr\u003eNo. Our records list JP640-lmp against a single model, the Jector JP640, so this listing is not a shared or cross-compatible part. If you own a different Jector projector, check its own model page for the correct lamp code before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs JP640-lmp the full part number I should search for?\u003c\/strong\u003e\u003cbr\u003eYes, JP640-lmp is the complete code as we have it on file for this lamp. It is also the only alternative code recorded for this fixture, so there is nothing further to cross-reference before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the box with a module lamp like this one?\u003c\/strong\u003e\u003cbr\u003eA module version bundles the bulb inside its housing, so you receive one assembled unit that replaces the whole cage in the projector rather than a bare bulb on its own. No separate housing purchase is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my old lamp is genuinely a JP640-lmp?\u003c\/strong\u003e\u003cbr\u003eCheck the printed code on the housing or the sticker inside the projector's lamp bay against JP640-lmp. Matching that string is the reliable way to confirm fit, since model names alone can cover several lamp revisions over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing cover projectors outside the Jector range?\u003c\/strong\u003e\u003cbr\u003eNo, this page is scoped to the Jector JP640 only. We list lamps against the specific projectors they are confirmed to fit, so always check the compatible model list on the page rather than assuming a lamp will cross brands.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182575595756,"sku":"LA-11370","price":123.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"23040005-projector-lamp-module","title":"23040005 projector lamp with module","description":"\u003cp\u003e23040005 is a Jector lamp and module unit made for two closely related models, the JP722S and the JP722X. Both projectors take the identical part, so you do not need to work out which sub-variant you have before ordering; the same complete assembly, bulb plus housing, fits either machine.\u003c\/p\u003e\u003cp\u003eOrder by the code 23040005 rather than by projector name, since JP722S and JP722X share one lamp record in our system. This is the module type, meaning the bulb arrives already seated in its housing, so fitting involves swapping the whole cage rather than handling loose glass. Confirm the code on your existing unit before you buy.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11262\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes 23040005 fit both the JP722S and the JP722X?\u003c\/strong\u003e\u003cbr\u003eYes. Our records list this single part number against both projectors, so one lamp code covers either model. There is no separate version for the S or X variant; the assembly is identical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do two different projector models share one lamp code?\u003c\/strong\u003e\u003cbr\u003eManufacturers sometimes build closely related projector variants around the same optical engine, and in this case Jector's JP722S and JP722X both take 23040005. Checking the code on your old lamp is still the safest way to confirm before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 23040005 a bare bulb or a full module?\u003c\/strong\u003e\u003cbr\u003eThis listing is the module version, so the lamp comes pre-fitted inside its own housing. You fit the complete assembly into the projector rather than transferring a bulb into your existing cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens to the lamp usage counter after I fit this?\u003c\/strong\u003e\u003cbr\u003eOnce the new module is installed, reset the lamp timer through the projector's on-screen menu. This keeps the hours display accurate for the replacement rather than carrying over the count from the old unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other part numbers I should look for instead of 23040005?\u003c\/strong\u003e\u003cbr\u003eNo, 23040005 is the only code we have on file for this lamp. If a number printed on your old unit does not match, check it carefully against ours before assuming it is a different part.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182576414956,"sku":"LA-11262","price":224.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"23040020-projector-lamp-module","title":"23040020 projector lamp with module","description":"\u003cp\u003eFour Jector models share the code 23040020: the JP825, JP825X, JP830X SP and JP840X. Rather than a lamp restricted to one machine, this module is recorded against the whole group, so if your projector is any of these four, the same complete lamp-and-housing unit is the correct order.\u003c\/p\u003e\u003cp\u003eBecause 23040020 spans four projector models, the part code matters more than the exact model name when you order. This is the module type, so the bulb is already mounted in its housing and the whole cage is replaced as one piece, which avoids any risk of misaligning a bare lamp during fitting.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11263\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich Jector projectors take the 23040020 lamp?\u003c\/strong\u003e\u003cbr\u003eThis part fits four models: the JP825, JP825X, JP830X SP and JP840X. All four are recorded against the same code, so the module you receive will match any of them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does JP830X SP need the same lamp as the JP825?\u003c\/strong\u003e\u003cbr\u003eJector built these models around a shared lamp platform, and our records show one code, 23040020, covering all four. If in doubt, match the printed code on your existing unit rather than relying on the model name alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to know which of the four models I own?\u003c\/strong\u003e\u003cbr\u003eNot for ordering purposes. Since 23040020 is listed against all four, quoting the part code is enough. Knowing the exact model is still useful for your own records, but it will not change which lamp you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the bare lamp or the module with housing?\u003c\/strong\u003e\u003cbr\u003eThis listing is the module version, meaning the bulb is already seated in a housing that replaces the whole cage in the projector. You are not handling a loose bulb during the swap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before fitting a replacement lamp module?\u003c\/strong\u003e\u003cbr\u003eConfirm the projector is powered off and unplugged, allow it to cool, then release the lamp door as your manual describes. Slide the old module out and the new one in the same orientation, and secure any retaining screws.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182577266924,"sku":"LA-11263","price":119.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"rw30-lamp-projector-lamp","title":"RW30-LAMP bare projector lamp","description":"\u003cp\u003eRW30-LAMP is a bare bulb rather than a housed module, made for the Jector RW30 in its standard form and in the RW30+FBX5 and RW30+FBX6 configurations. Because it is a bare lamp, it is designed to go inside your existing housing rather than replace the housing itself.\u003c\/p\u003e\u003cp\u003eThe FBX5 and FBX6 suffixes refer to accessory configurations built on the same RW30 body, and all three take the identical RW30-LAMP bulb, so the model suffix does not change which lamp to order. Because this is a bare lamp, take care handling the glass and follow your projector's cooling instructions before opening the lamp compartment.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11265\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the FBX5 or FBX6 in my projector's name mean?\u003c\/strong\u003e\u003cbr\u003eThese are accessory or lens configurations built on the standard Jector RW30 body. They do not change the lamp itself; RW30-LAMP is the correct bulb for the base RW30 and both FBX configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSince this is a bare lamp, do I need a new housing too?\u003c\/strong\u003e\u003cbr\u003eNo. A bare lamp is designed to be fitted into your existing housing, which you keep and reuse. You are only replacing the bulb itself, not the surrounding cage or module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I handle a bare projector bulb safely?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully before opening the lamp compartment, and avoid touching the glass envelope directly with bare skin, since oils can shorten its life. Handle it by the base or use a cloth, and dispose of the old bulb according to local rules.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill RW30-LAMP fit a plain RW30 with no FBX suffix?\u003c\/strong\u003e\u003cbr\u003eYes. Our records list RW30-LAMP against the standard RW30 as well as the RW30+FBX5 and RW30+FBX6 configurations, so the base model is covered by the same part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reset the lamp timer after fitting a bare bulb?\u003c\/strong\u003e\u003cbr\u003eAccess the projector's on-screen service or lamp menu after installation and select the reset option there. This clears the previous bulb's recorded hours so the counter starts again from zero for the new one.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182577955052,"sku":"LA-11265","price":171.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"13080012-projector-lamp","title":"13080012 bare projector lamp","description":"\u003cp\u003e13080012 is the bare lamp recorded for one projector, the Jector MD525. It ships as the bulb alone, without a housing, so it is intended for fitting into the cage your MD525 already has rather than replacing that cage as a complete unit.\u003c\/p\u003e\u003cp\u003eAs a bare lamp, 13080012 depends on the housing already installed in your MD525 being in good condition, so check the connector pins and the housing frame for damage before fitting a new bulb into an old cage. The part number 13080012 is the only code we hold for this lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11264\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse my current housing with this bare lamp?\u003c\/strong\u003e\u003cbr\u003eYes, that is exactly what a bare lamp is for. 13080012 is the bulb only, so it fits into the existing MD525 housing rather than arriving with a new one attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I inspect on the old housing before fitting a bare bulb?\u003c\/strong\u003e\u003cbr\u003eLook at the connector pins for scorching or bent contacts, and check the housing frame is not cracked or warped from heat. A housing in poor condition can cause a new bulb to fail early even if the bulb itself is fine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 13080012 listed for any projector besides the MD525?\u003c\/strong\u003e\u003cbr\u003eNo, our records show this code against a single model, the Jector MD525. If you have a different Jector projector, its lamp page will list the code specific to that model instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm 13080012 is the right part before I order?\u003c\/strong\u003e\u003cbr\u003eCompare the code printed on your existing bulb or its base against 13080012. Matching that string is more reliable than going by the projector's model name alone, since some models cover several lamp revisions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat signals that my Jector MD525's bulb has reached the end of the road?\u003c\/strong\u003e\u003cbr\u003eCommon signs include a noticeably dimmer picture, a red or amber lamp warning light on the projector, or the unit failing to power on at all. Checking the lamp hours in the on-screen menu against your usage is also worth doing.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182578774252,"sku":"LA-11264","price":148.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"13080020-projector-lamp-module","title":"13080020 projector lamp with module","description":"\u003cp\u003e13080020 is the lamp and module built for the Jector H530. This version is the full assembly, bulb and housing together, so it replaces the whole unit inside the projector rather than asking you to transfer a bulb into the frame that is already fitted.\u003c\/p\u003e\u003cp\u003eWe also list 13080020 as a bare lamp elsewhere for the same H530, at a different price, for buyers who only need the bulb and already have a sound housing. This page is the module version: check which one you actually need before ordering, since the code alone does not tell the two apart.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11260\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy are there two listings for 13080020 at different prices?\u003c\/strong\u003e\u003cbr\u003eOne is the module, bulb and housing together, which is this page. The other lists the same code as a bare bulb only. They share a part number because it is the same lamp, but the module includes the housing and costs more.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if I need the module or the bare version?\u003c\/strong\u003e\u003cbr\u003eIf your H530's existing housing is undamaged and you only need a new bulb, the bare listing is enough. If the housing is cracked, discoloured or you would rather not reuse it, choose this module version instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 13080020 fit any Jector projector besides the H530?\u003c\/strong\u003e\u003cbr\u003eNo, our records show this code against the H530 only. If you have a different Jector model, use its own product page to find the matching lamp code rather than assuming this one applies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I buy the module version?\u003c\/strong\u003e\u003cbr\u003eYou receive the bulb already mounted inside its housing as one assembled unit, ready to slide into the projector's lamp bay. There is nothing further to attach before fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I reset the lamp timer after installing this module?\u003c\/strong\u003e\u003cbr\u003eYes. After fitting, open the projector's on-screen lamp or service menu and select reset, so the hours counter reflects the new lamp rather than continuing from the old one.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182579495148,"sku":"LA-11260","price":164.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"13080020-projector-lamp","title":"13080020 bare projector lamp","description":"\u003cp\u003eThis page lists 13080020 as a bare bulb for the Jector H530, sold without a housing. It suits buyers whose existing H530 housing is still sound and who only need the glass and burner replaced, not the frame around it.\u003c\/p\u003e\u003cp\u003eThe same code, 13080020, is also listed as a complete lamp and module for the H530, at a different price, for anyone who wants the housing replaced too. Because this is the bare version, inspect your current housing and its connector before ordering, since a damaged housing will not be included with this purchase.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11259\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this listing and the module version at a lower price?\u003c\/strong\u003e\u003cbr\u003eThis page is the bare bulb only. We separately list the same code, 13080020, as a full module with housing included, which costs more because it comes with the extra housing hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it worth choosing the bare lamp over the module?\u003c\/strong\u003e\u003cbr\u003eIt depends on your existing housing. If it is undamaged, a bare lamp is the simpler option since you are only replacing the bulb. If the housing is cracked or discoloured, the module version replaces both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the steps for moving the 13080020 into my Jector H530's cage?\u003c\/strong\u003e\u003cbr\u003ePower off and unplug the projector, let it cool, then open the lamp compartment as your manual describes. Remove the old bulb from its housing frame, seat the new 13080020 in the same orientation, and reconnect it before closing the compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bare lamp include a warning if the connector is damaged?\u003c\/strong\u003e\u003cbr\u003eNo, the listing does not cover the condition of your housing or connector; that is worth checking yourself before fitting. Scorched or bent pins on the connector are a sign the housing may need attention.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 13080020 work in any Jector model other than the H530?\u003c\/strong\u003e\u003cbr\u003eOur records only list this code against the Jector H530. For any other Jector projector you own, use that model's own product page to find its correct lamp code.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182580117740,"sku":"LA-11259","price":288.37,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"jp830x-lamp-ushio-projector-lamp-module","title":"JP830X-LAMP (Ushio) projector lamp with module","description":"\u003cp\u003eJP830X-LAMP (Ushio) is a complete lamp and module covering three Jector projectors: the JP822X, JP830X and JP835X, each noted here as the Ushio-burner variant. The Ushio marking identifies the burner brand fitted inside this particular lamp, which is worth checking against your existing unit before ordering.\u003c\/p\u003e\u003cp\u003eThe code JP830X-LAMP (Ushio) is the only reference we hold for this part, and the \"Ushio\" notation simply flags which burner brand is fitted inside this particular lamp. This is the module version, so the whole assembly, bulb and housing, is replaced as one piece rather than the bulb alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09305\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the \"Ushio\" label mean in this part number?\u003c\/strong\u003e\u003cbr\u003eUshio is the burner brand fitted inside this particular lamp, noted in the part reference because more than one burner brand can exist for lamps in this Jector range. Check this detail against your existing unit if you want to match it precisely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes JP830X-LAMP (Ushio) fit the JP822X as well as the JP830X?\u003c\/strong\u003e\u003cbr\u003eYes, our records list this code against three models: JP822X, JP830X and JP835X, each noted here with the Ushio burner fitted. One part number covers all three of them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the bare lamp or the complete module?\u003c\/strong\u003e\u003cbr\u003eThis listing is the module version, so the bulb arrives already fitted in its housing and the whole assembly is swapped as one unit rather than transferring a bare bulb into your existing frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other codes I should look for besides this one?\u003c\/strong\u003e\u003cbr\u003eNo, JP830X-LAMP (Ushio) is the only reference recorded for this lamp in our system, so there is no separate alternative code to search for before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit a module lamp into the JP835X?\u003c\/strong\u003e\u003cbr\u003ePower off and unplug the projector, let it cool fully, then release the lamp door as the manual describes. Remove the old module and slide the new JP830X-LAMP (Ushio) unit in the same orientation before securing it.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182581887212,"sku":"LA-09305","price":119.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"jp840st-lamp-projector-lamp","title":"JP840ST-LAMP bare projector lamp","description":"\u003cp\u003eJP840ST-LAMP is the bare bulb listed for the Jector JP840XST, a short-throw model in the same wider range. Supplied without a housing, it is built to go into the cage your JP840XST already carries rather than arrive as a boxed assembly.\u003c\/p\u003e\u003cp\u003eThe abbreviated code JP840ST-LAMP is the only reference on file for this bulb, so quote it exactly when ordering rather than the longer JP840XST projector name, which is easy to mistype. Since it is a bare lamp, the fit depends on the existing housing in your projector being free of cracks or scorching.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09308\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does the part number end in \"ST\" while the projector is \"XST\"?\u003c\/strong\u003e\u003cbr\u003eThe part reference JP840ST-LAMP is simply the shortened code we hold on file for the JP840XST projector's lamp. The two are the same lamp; the naming difference is just how the part is abbreviated in our records.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bare lamp come with a housing?\u003c\/strong\u003e\u003cbr\u003eNo, it is the bulb only, supplied without any housing attached. You continue using the housing already fitted inside your JP840XST, and only the lamp itself is being replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs JP840ST-LAMP used in any other Jector projector?\u003c\/strong\u003e\u003cbr\u003eOur records list this code against a single model, the Jector JP840XST, and no other projector shares it, so it is not a lamp to use across the wider range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check on the housing before fitting a bare replacement bulb?\u003c\/strong\u003e\u003cbr\u003eInspect the connector pins for scorch marks or bending and check the surrounding housing frame is not cracked or warped, since a damaged housing can shorten the life of even a brand new bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow soon should the lamp timer be reset after fitting?\u003c\/strong\u003e\u003cbr\u003eReset it as soon as the new JP840ST-LAMP is installed, using the on-screen service or lamp menu, so hour tracking begins fresh rather than continuing from the previous bulb's total.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182582640876,"sku":"LA-09308","price":247.51,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"pt-xa5lamp-projector-lamp-module","title":"PT-XA5LAMP projector lamp with module","description":"\u003cp\u003ePT-XA5LAMP is a lamp and module listed against two Jector projector names, the JP935X and the PT-XA5. Whichever name appears on your unit, the same part code applies, and this module version supplies the bulb already fitted into its housing as one piece.\u003c\/p\u003e\u003cp\u003eTwo different model names, JP935X and PT-XA5, point to the same lamp record here, so ordering by the code PT-XA5LAMP avoids any confusion over which name your projector uses. As the module type, fitting means swapping the whole housed unit rather than transferring a bulb into your current frame.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09316\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one projector list both JP935X and PT-XA5 names?\u003c\/strong\u003e\u003cbr\u003eOur records show these as two names attached to the same lamp requirement, so both point to PT-XA5LAMP. If your projector carries either designation, this listing is the one to use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich name should I search by if my projector says PT-XA5?\u003c\/strong\u003e\u003cbr\u003eYou can search by either PT-XA5 or JP935X, since our records tie both to the same part, PT-XA5LAMP. Using the part code itself is the most direct way to reach the correct listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this listing for a bare bulb or the complete module?\u003c\/strong\u003e\u003cbr\u003eThis is the module version, meaning the bulb comes pre-fitted inside its housing as one assembled unit, ready to install without handling loose glass separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there any other part numbers linked to PT-XA5LAMP?\u003c\/strong\u003e\u003cbr\u003eNo, our records show PT-XA5LAMP as the only code we hold for this lamp, with no separate alternative numbers recorded that you would need to check before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the correct way to reset the lamp counter on this projector?\u003c\/strong\u003e\u003cbr\u003eAfter fitting the new module, open the projector's on-screen lamp or service menu and choose the reset option there, so the recorded hours reflect the new PT-XA5LAMP unit rather than the old one.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182583623916,"sku":"LA-09316","price":331.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"jp640-lmp-projector-lamp","title":"JP640-lmp bare projector lamp","description":"\u003cp\u003eThis listing supplies JP640-lmp as a bare bulb for the Jector JP640, without the housing attached. We also list the same code as a complete module elsewhere at a different price, so this page suits buyers who only need the bulb replaced.\u003c\/p\u003e\u003cp\u003eBecause the module and bare listings share the code JP640-lmp, check which one you have added to your basket before checkout, since only the price and included housing differ between them. Before fitting, inspect your existing housing and connector, as a bare bulb relies on both being in sound condition.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11369\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy is this bare listing priced differently to the module version?\u003c\/strong\u003e\u003cbr\u003eThis page covers the bulb only, while our separate module listing for the same code, JP640-lmp, includes a new housing as well, which accounts for the price difference between the two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I pick the right one if both share the same code?\u003c\/strong\u003e\u003cbr\u003eLook at whether the listing says \"with module\" or \"bare\" in its title rather than relying on the code alone, since JP640-lmp appears on both pages for the Jector JP640.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I fit this bare bulb into any housing?\u003c\/strong\u003e\u003cbr\u003eNo, it should go into the housing already fitted inside your Jector JP640 specifically, not a housing from a different projector, even if that housing looks similar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat signs suggest the bulb rather than the whole housing needs replacing?\u003c\/strong\u003e\u003cbr\u003eA dimming or flickering image with an otherwise undamaged housing frame and clean connector pins usually points to the bulb itself, which is when a bare lamp like this one is the appropriate choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to reset the lamp hours after fitting a bare bulb?\u003c\/strong\u003e\u003cbr\u003eYes, use the on-screen lamp menu in your JP640 to reset the counter once the new bulb is in place, so recorded hours start again from zero.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182584377580,"sku":"LA-11369","price":268.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"jp840wx-lamp-projector-lamp","title":"JP840WX-LAMP bare projector lamp","description":"\u003cp\u003eJP840WX-LAMP is the bare bulb recorded for two Jector projectors, the JP840WX and the JP840XSP. Both take the identical lamp, so the part code rather than the exact model suffix is what determines the correct order, and the bulb is supplied without a housing attached.\u003c\/p\u003e\u003cp\u003eSince JP840WX-LAMP covers both the JP840WX and JP840XSP, there is no need to work out which suffix your projector carries before ordering, only that the housing already inside it is sound, because this is a bare bulb and no housing ships with it. Check the code on your old lamp against JP840WX-LAMP if you want extra certainty.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11530\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes JP840WX-LAMP fit both the JP840WX and JP840XSP models?\u003c\/strong\u003e\u003cbr\u003eYes, our records list this single code against both projectors, so one bare bulb covers either model without needing a separate part number or version for each one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do the WX and XSP variants share the same lamp?\u003c\/strong\u003e\u003cbr\u003eThese two Jector models are recorded against one lamp code in our system, JP840WX-LAMP, which suggests a shared internal design between the variants. Checking the code on your existing lamp remains the surest way to confirm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a housing supplied with this bulb?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare lamp, so only the bulb itself is included with this order. The housing already fitted inside your JP840WX or JP840XSP stays in place and is reused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I handle a bare bulb safely during installation?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool completely before opening the lamp compartment, and avoid direct contact between bare skin and the glass envelope, handling the bulb by its base instead to prevent oil marks that can shorten its life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOnce the old Jector JP840WX bulb is out, how should it be discarded?\u003c\/strong\u003e\u003cbr\u003eProjector bulbs generally should not go into ordinary household rubbish, so check your local council's guidance on electronic or hazardous waste before disposing of the old JP840WX-LAMP unit.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182585131244,"sku":"LA-11530","price":125.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"jp845x-lamp-projector-lamp","title":"JP845X-LAMP bare projector lamp","description":"\u003cp\u003eJP845X-LAMP is the bare lamp recorded for one projector, the Jector JP845X. It is supplied as the bulb alone, so fitting means placing it into the housing already installed in your JP845X, which stays in the projector rather than being exchanged.\u003c\/p\u003e\u003cp\u003eJP845X-LAMP is the only code on file for this lamp, so match it against what is printed on your existing bulb or its base before ordering. Because this is a bare lamp, check the housing and connector for damage first, since neither is replaced as part of this purchase.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09309\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs JP845X-LAMP used in any projector besides the JP845X?\u003c\/strong\u003e\u003cbr\u003eNo, our records list this code against a single model, the Jector JP845X. If you own a different Jector projector, its own product page will show the code that applies there instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this order include a housing?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare bulb only. The housing already fitted inside your JP845X stays in place, and only the lamp itself is being replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the best way to confirm the fit before ordering?\u003c\/strong\u003e\u003cbr\u003eCompare the code printed on your existing bulb or its base against JP845X-LAMP directly. This is more reliable than going by the projector's model name alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reset the lamp hour count after fitting this bulb?\u003c\/strong\u003e\u003cbr\u003eOnce installed, open the projector's on-screen service or lamp menu and select the reset option, so the counter reflects the new JP845X-LAMP rather than continuing the previous bulb's recorded hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should a projector lamp like this be replaced?\u003c\/strong\u003e\u003cbr\u003eTypical signs include a dimmer or discoloured picture, a lamp warning light on the projector itself, or the unit failing to power up. Checking recorded lamp hours in the on-screen menu can also indicate it is due.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182586081516,"sku":"LA-09309","price":247.51,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"rlc-043-projector-lamp-module","title":"RLC-043 projector lamp with module","description":"\u003cp\u003eRLC-043 is used across three different brands: the Everest ED-P65, the Jector JP850X and Viewsonic's PJL9250, PJL9300W and PJL9520. Despite the different badges, all five projectors share this same 275 watt, 2000 hour lamp, supplied here as a complete module.\u003c\/p\u003e\u003cp\u003eEverest, Jector and Viewsonic have all sold rebadged versions of what is essentially the same projector platform, which is why one lamp code covers all three brands. RLC-044 is also listed as an alternative code for this lamp, so check that against your old unit too.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09085\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp fit projectors from three different brands?\u003c\/strong\u003e\u003cbr\u003eEverest, Jector and Viewsonic have all sold the same underlying projector design under their own branding, which is common in the projector market. RLC-043 is the lamp all three versions share.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the module version or the bare bulb?\u003c\/strong\u003e\u003cbr\u003eThis listing is the Projector Lamp with Module, meaning the bulb arrives already fitted into its housing. A bare version of RLC-043 is also available separately if you only need the bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is RLC-044 and how does it relate to RLC-043?\u003c\/strong\u003e\u003cbr\u003eRLC-044 is an alternative code for this same lamp. If your old lamp or its box shows RLC-044 rather than RLC-043, it is still the correct match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit my Jector JP850X?\u003c\/strong\u003e\u003cbr\u003eYes, the Jector JP850X is one of the five listed projectors that use RLC-043, alongside the Everest ED-P65 and the three Viewsonic PJL models it shares this platform with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated lamp life for RLC-043?\u003c\/strong\u003e\u003cbr\u003e2000 hours at 275 watts is the rated figure across all three brands, since they share the identical lamp and specification regardless of which name appears on the casing.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182630809836,"sku":"LA-09085","price":192.47,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"rlc-043-projector-lamp","title":"RLC-043 bare projector lamp","description":"\u003cp\u003eThis is the bare version of RLC-043, the lamp used in the Everest ED-P65, the Jector JP850X and the Viewsonic PJL9250, PJL9300W and PJL9520. At 275 watts and rated for 2000 hours, it is sold without housing for fitting into your existing one.\u003c\/p\u003e\u003cp\u003eA complete module version of RLC-043 is also available if you would prefer not to reuse your old housing. RLC-044 is listed as an alternative code for this same lamp, so check either number against your existing bulb before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09084\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this listing and the RLC-043 module?\u003c\/strong\u003e\u003cbr\u003eThis is the bare bulb only, for fitting into your existing housing. The module version includes a new housing as well, which suits anyone whose current housing is damaged or missing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this lamp in a Viewsonic PJL9300W?\u003c\/strong\u003e\u003cbr\u003eYes, the PJL9300W is one of the five projectors across three brands that share the RLC-043 lamp, alongside the PJL9250, PJL9520, Everest ED-P65 and Jector JP850X.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I do with the old lamp housing?\u003c\/strong\u003e\u003cbr\u003eKeep it, since a bare lamp like this one is designed to be fitted into your projector's existing housing rather than replacing it, so the housing remains reusable for future lamp swaps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs RLC-044 a different lamp from RLC-043?\u003c\/strong\u003e\u003cbr\u003eNo, RLC-044 is simply an alternative code for the identical lamp. Either number appearing on your old bulb confirms this bare lamp is the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow careful do I need to be handling a bare bulb?\u003c\/strong\u003e\u003cbr\u003eHandle it by the base rather than the glass, and let the projector cool fully before removing the old lamp, since bare bulbs are more exposed than a housed module.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182633431276,"sku":"LA-09084","price":192.47,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32468-lg.png?v=1786962154"},{"product_id":"23040049-projector-lamp-module","title":"23040049 projector lamp with module","description":"\u003cp\u003e23040049 is a complete lamp and housing module shared by thirty-six projectors across six brands: Ask's C510W and C550X, Boxlight's KTX620, Eiki's EK-300 series, Jector's MF652 and MF660 ranges, Proxima's C510W and C550X, and Roly's RP-L4500U through RP-L6100X. Ask and Proxima list matching model numbers, such as the C510W and C550X, reflecting how closely those two ranges are related.\u003c\/p\u003e\u003cp\u003eThis lamp is also referenced as 22040001 in some manuals, most often for the Eiki EK-100W and EK-101X series or the Roly and Proxima equivalents, so that code points to the same part. Because this listing includes the housing, fitting it means swapping out the entire old module rather than opening it to reach the bulb inside.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11361\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 36 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich brands take the 23040049 lamp module?\u003c\/strong\u003e\u003cbr\u003eAsk, Boxlight, Eiki, Jector, Proxima and Roly each sell projectors built around this lamp, covering thirty-six models between them, from the Ask C510W to the Roly RP-L6100X.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do Ask and Proxima share identical model numbers like C510W?\u003c\/strong\u003e\u003cbr\u003eAsk and Proxima source their projectors from the same underlying design, so several of their model numbers, including the C510W and C550X, match exactly, and both take the 23040049 lamp module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 22040001 the same part as 23040049?\u003c\/strong\u003e\u003cbr\u003eYes, 22040001 is an alternative reference used in some manuals for the identical lamp module, most commonly for the Eiki EK-100 series and its Roly and Proxima equivalents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can six different brands sell projectors using the same lamp?\u003c\/strong\u003e\u003cbr\u003eAsk, Jector, Proxima and Roly, among others, source their projectors from shared manufacturing designs, so the same lamp module fits models sold under each of these different names.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before fitting a new module like this one?\u003c\/strong\u003e\u003cbr\u003eMake sure the projector is switched off, unplugged and fully cooled, then remove the lamp access panel as shown in your model's manual before releasing the old module and fitting this one.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182645522668,"sku":"LA-11361","price":122.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/31125-xl.png?v=1786959293"},{"product_id":"seattlex30n-930-projector-lamp-module","title":"SEATTLEX30N-930 projector lamp with module","description":"\u003cp\u003eSEATTLEX30N-930 is a housed lamp module built for the Boxlight Seattle X26N and SEATTLE X30N ranges, the ProjectorWrite2 and Projector Write 2 models, the Acto LX610 and the Jector S25. Rated at 230 watts with a 2000-hour life, it covers ten projectors sold under three different brand names for what is largely the same platform.\u003c\/p\u003e\u003cp\u003eOlder stock may carry the code Seattle X26N-930, sometimes marked SHP, or simply X26N-930, all of which point to this same lamp. Since Acto, Boxlight and Jector versions of these projectors share a common design, check your model name carefully rather than assuming the brand alone determines the right lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 230 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08073\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the Jector S25 take the same lamp as the Boxlight Seattle X30N?\u003c\/strong\u003e\u003cbr\u003eYes, SEATTLEX30N-930 covers both, along with the Acto LX610 and several Boxlight ProjectorWrite and Seattle models. These projectors share a common lamp platform across the three brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SHP marking on Seattle X26N-930 mean?\u003c\/strong\u003e\u003cbr\u003eSHP refers to the lamp technology used inside some versions of this bulb. Seattle X26N-930 (SHP) and Seattle X26N-930 without the marking both refer to the same lamp as SEATTLEX30N-930.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many projectors does this lamp code cover?\u003c\/strong\u003e\u003cbr\u003eSEATTLEX30N-930 is listed against ten projectors across Acto, Boxlight and Jector, including the Seattle X26N, SEATTLE X30N, ProjectorWrite2 and ProjectoWrite2 spellings, the Acto LX610 and the Jector S25.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes SEATTLEX30N-930 replace the housing along with the bulb?\u003c\/strong\u003e\u003cbr\u003eYes, SEATTLEX30N-930 is a complete module, with the bulb already mounted in its housing. It is fitted as a single unit rather than requiring the old housing to be reused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do some projector names on this list look slightly different?\u003c\/strong\u003e\u003cbr\u003eSome models appear under slightly different names, such as Boxlight ProjectorWrite2 and ProjectoWrite2, or Seattle X26N and SEATTLE X30N. Check your projector's rating label directly rather than relying on the model name alone.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182656762092,"sku":"LA-08073","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34786-xl.png?v=1786964304"},{"product_id":"jector-jp922x-projector-lamp","title":"JP922X bare projector lamp","description":"\u003cp\u003eThe JP922X is a Jector projector for which we hold no separate manufacturer part code, so this lamp is listed by its model name instead. It's supplied as a bare bulb, intended to fit inside the housing already installed in your projector rather than as a complete module.\u003c\/p\u003e\u003cp\u003eKeep your existing housing intact when you remove the old lamp, since this bare bulb ships without one. Handle the new bulb by its base rather than the glass, and give the old lamp time to cool before you open the compartment to remove it.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09312\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy is there no part number for the JP922X lamp?\u003c\/strong\u003e\u003cbr\u003eWe list this lamp by the projector model it fits, the Jector JP922X, since no separate manufacturer code is on record. Ordering by model name still identifies the correct bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing supply a housing along with the bulb?\u003c\/strong\u003e\u003cbr\u003eNo, it's a bare bulb only. You fit it into the housing already inside your JP922X rather than receiving a complete module with this order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the safest way to remove the old bulb?\u003c\/strong\u003e\u003cbr\u003eSwitch the projector off, unplug it and let the lamp cool fully before opening the compartment, since bulbs run hot during normal use and can cause burns if handled too soon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I avoid touching the new bulb directly?\u003c\/strong\u003e\u003cbr\u003eYes, handle it by its base rather than the glass envelope, since skin oils can cause uneven heating once the lamp is powered on, shortening its working life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know this is definitely the right lamp for my Jector unit?\u003c\/strong\u003e\u003cbr\u003eCheck the model name printed on your projector reads JP922X. That match confirms this bare bulb is the correct one for your unit before you order it.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182673473772,"sku":"LA-09312","price":471.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"jector-jp725s-projector-lamp","title":"JP725S bare projector lamp","description":"\u003cp\u003eNo separate part code is on record for the lamp used in Jector's JP725S, so this listing identifies it by the projector name instead. It's a bare bulb only, built to fit into the housing your JP725S already has rather than arriving as a complete module.\u003c\/p\u003e\u003cp\u003eSince no housing ships with this order, hold on to your existing carrier and fit the new bulb into it once the spent one is removed. Double-check the model badge on your projector reads JP725S before ordering, as Jector's other models take different lamps.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09301\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does this listing use the projector name instead of a part code?\u003c\/strong\u003e\u003cbr\u003eThere's no manufacturer part number on record for the JP725S lamp, so we identify it by the projector it fits instead. That's enough detail to confirm you're ordering the correct bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bulb fit other Jector models like the JP830X or JP922X?\u003c\/strong\u003e\u003cbr\u003eNo, this listing is specific to the JP725S. Other Jector models use their own lamps, so check the exact model badge on your projector before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the JP725S lamp come with a housing?\u003c\/strong\u003e\u003cbr\u003eNo, it's a bare bulb only. You fit it into the housing already installed in your JP725S rather than receiving a full module with this order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat handling steps keep a new JP725S bulb safe during installation?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool and unplug it before opening the lamp compartment, and avoid touching the new bulb's glass with bare fingers during installation to keep it working well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm my projector is a JP725S and not a similar model?\u003c\/strong\u003e\u003cbr\u003eCheck the model name printed on the casing or near the lamp compartment. If it reads JP725S, this bare bulb is the correct match for your unit.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182673604844,"sku":"LA-09301","price":331.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"jector-jp925x-projector-lamp","title":"Jector JP925X bare projector lamp","description":"\u003cp\u003eWe do not hold a manufacturer part number for this lamp, so it is listed by the projector it fits, the Jector JP925X. It is supplied as a bare bulb, meaning you keep and reuse the housing already fitted inside your JP925X.\u003c\/p\u003e\u003cp\u003eWhen there is no printed code to order by, matching the exact projector model is the safest way to get the right lamp, so check that your unit reads JP925X rather than a similarly named sibling model before buying. As a bare lamp, it fits into your existing housing rather than replacing it.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does this listing not show a manufacturer part number?\u003c\/strong\u003e\u003cbr\u003eNot every lamp record we hold includes a published code, so in cases like this one we identify the lamp by the exact projector it fits, the Jector JP925X, rather than by a part string.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I be sure this is the right lamp without a code to check?\u003c\/strong\u003e\u003cbr\u003eConfirm the projector model printed on the unit itself reads JP925X exactly, since related Jector models can look similar but take different lamps. The projector name is the identifier for this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a bare bulb or a full housing unit?\u003c\/strong\u003e\u003cbr\u003eThis is the bare version, so you receive the bulb alone and reuse the housing already inside your JP925X. Nothing is included beyond the lamp itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check on my existing housing before fitting this bulb?\u003c\/strong\u003e\u003cbr\u003eLook at the connector for bent or scorched pins and check the housing frame is not cracked from heat, since a bare bulb depends on that housing still being sound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reset the lamp hours after fitting this replacement?\u003c\/strong\u003e\u003cbr\u003eOpen your JP925X's on-screen service or lamp menu once the new bulb is installed and select the reset option, so the hours counter starts again rather than carrying over the previous bulb's total.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182673768684,"sku":"LA-09313","price":471.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"jector-jp930x-projector-lamp","title":"Jector JP930X bare projector lamp","description":"\u003cp\u003eThis lamp has no manufacturer code on file, so we list it against the projector it is confirmed to fit, the Jector JP930X. Supplied bare, it is the bulb alone, intended to go into the housing your JP930X already carries.\u003c\/p\u003e\u003cp\u003eWithout a part number to verify, double-check the model printed on your projector reads JP930X rather than a nearby model in the same range, since visually similar units can take different lamps. Being a bare bulb, this order does not include a housing, so plan to reuse the one already fitted.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow is this JP930X lamp identified without a manufacturer code?\u003c\/strong\u003e\u003cbr\u003eSome lamps in our catalogue have no published manufacturer code, and this is one of them, so we identify it by the projector it fits, the Jector JP930X, instead of a part string.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the risk of ordering by projector name instead of a code?\u003c\/strong\u003e\u003cbr\u003eThe main risk is picking a similarly named model by mistake, so check the exact model printed on your JP930X carefully. Once that is confirmed, ordering by projector name is just as reliable as a code.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAm I reusing the JP930X's own cage with this purchase?\u003c\/strong\u003e\u003cbr\u003eYes. This is the bare lamp only, so you keep and reuse the housing already fitted inside your JP930X, and only the bulb itself is replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it safe to touch the glass on a bare replacement bulb?\u003c\/strong\u003e\u003cbr\u003eIt is best avoided. Skin oils on the glass envelope can cause uneven heating and shorten the bulb's life, so handle it by the base or with a clean cloth during fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know when a lamp like this needs replacing?\u003c\/strong\u003e\u003cbr\u003eWatch for a dimmer or discoloured image, a lamp warning indicator on the projector, or the unit refusing to start. Checking recorded lamp hours against typical usage is a useful extra signal.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182673965292,"sku":"LA-09314","price":471.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"jector-jp922s-projector-lamp","title":"Jector JP922S bare projector lamp","description":"\u003cp\u003eNo manufacturer part code is recorded for this lamp, so the listing is built around the projector it fits: the Jector JP922S. It is a bare bulb, sold without a housing, made to be fitted inside the cage already installed in your JP922S.\u003c\/p\u003e\u003cp\u003eBecause there is no code to cross-check, the projector model itself is the identifying detail here, so confirm your unit is stamped JP922S and not a related sibling before ordering. As a bare bulb, the fit also depends on your existing housing being undamaged, since none is supplied with this purchase.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09311\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy doesn't this product have a part number?\u003c\/strong\u003e\u003cbr\u003eThis particular lamp does not have a manufacturer code in our records, so instead of a part string we identify it by the exact projector it is confirmed to fit, the Jector JP922S.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the best way to confirm this is the right lamp for my projector?\u003c\/strong\u003e\u003cbr\u003eCheck the model designation printed on your projector itself matches JP922S exactly. Since there is no part code to fall back on for this lamp, the projector model is the detail that matters most.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a new housing be supplied with this order?\u003c\/strong\u003e\u003cbr\u003eNo. This is a bare lamp, so only the bulb itself is included in this order, and you continue using the housing that is already fitted inside your JP922S.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should I let the projector cool before opening the lamp bay?\u003c\/strong\u003e\u003cbr\u003eFollow the cooling period given in your JP922S manual, generally several minutes after power-off, before touching the lamp compartment. The bulb and surrounding housing can stay hot well after the projector shuts down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes ordering by projector name instead of a part number affect price?\u003c\/strong\u003e\u003cbr\u003eNo, pricing reflects the lamp itself rather than how it is identified. Whether a listing uses a manufacturer code or a projector model, the underlying part and its cost are unrelated to that labelling choice.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182674129132,"sku":"LA-09311","price":471.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"jector-jp920x-projector-lamp","title":"Jector JP920X bare projector lamp","description":"\u003cp\u003eThe Jector JP920X takes a bare bulb that we list by projector model rather than by a manufacturer code, since none is recorded for this lamp. Being a bare lamp, it is the bulb only, so fitting means reusing the housing already installed inside your projector rather than replacing that housing as well.\u003c\/p\u003e\u003cp\u003eSince there is no part code for this lamp, match the projector model on your unit carefully against JP920X before ordering, as related JP9-series models can carry different lamps despite similar naming. Check your existing housing and connector are undamaged, since the bare bulb depends on both being sound.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-09310\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow do I identify this lamp if there's no part number?\u003c\/strong\u003e\u003cbr\u003eWe list it by the exact projector it fits, the Jector JP920X. Match that model designation against what is printed on your unit, since there is no manufacturer code on file to cross-check instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCould a similarly named JP9-series projector take the same lamp?\u003c\/strong\u003e\u003cbr\u003eNot necessarily. Related models in the same series can use different lamps despite similar names, so always confirm your projector reads JP920X specifically rather than assuming a sibling model shares this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a housing included in this order?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare bulb, so only the lamp itself is supplied. The housing already fitted in your JP920X stays in place and is reused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the correct way to dispose of the old bulb?\u003c\/strong\u003e\u003cbr\u003eProjector lamps typically contain materials that should not go into general household waste, so check your local council's rules for electronic or hazardous waste disposal before discarding the old bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to reset anything in the projector after fitting this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, use the on-screen lamp or service menu to reset the hour counter once the new bulb is installed, so the projector tracks usage from zero rather than continuing the previous bulb's count.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182674653420,"sku":"LA-09310","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"}],"url":"https:\/\/www.lampsauthority.com\/collections\/jector-projector-lamps.oembed","provider":"Lamps Authority","version":"1.0","type":"link"}