{"title":"Casio projector lamps","description":"\u003cp\u003eReplacement projector lamps for Casio projectors — 9 lamps catalogued. Available as bare lamps (the bulb alone, fitted into the housing already in your projector) and as complete modules (bulb and housing together, ready to drop straight in).\u003c\/p\u003e\u003cp\u003eEvery lamp carries a genuine Philips, Osram or Ushio burner, ships free worldwide, and is covered by a 180-day guarantee. If you are not sure which your projector takes, check the code on the old lamp or send us a photo of the label.\u003c\/p\u003e","products":[{"product_id":"4824b001-projector-lamp-module","title":"4824B001 Projector Lamp with Module","description":"\u003cp\u003e4824B001 also comes as a full module here, adding a new housing to the same 330W, 2,000-hour bulb used in the bare-lamp listing. It fits Canon's LV-7590 as well as Casio's YL-4A and YL-4B projectors, which share this lamp despite the different badge on the case. Canon's own reference for the part is LV-LP33.\u003c\/p\u003e\u003cp\u003eChoosing this module over the bare-bulb version of 4824B001 means the housing is replaced as well, which is worth doing if your existing housing shows any wear. LV-LP33 and 4824B001 both refer to the identical lamp regardless of format. Casio's YL-4A and YL-4B share a model number with only the suffix differing, so either one takes this same module.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08583\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do Canon and Casio share this lamp?\u003c\/strong\u003e\u003cbr\u003eCasio's YL-4A and YL-4B projectors were built on the same engine as Canon's LV-7590, so both brands use the identical 4824B001 lamp and housing rather than separate parts for each badge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I buy this module or the bare bulb listing?\u003c\/strong\u003e\u003cbr\u003eChoose this module if you'd like a new housing along with the bulb, or the separate bare-bulb listing for 4824B001 if your current housing is still in good condition and you only need the lamp itself replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between Casio's YL-4A and YL-4B?\u003c\/strong\u003e\u003cbr\u003eThe 'A' and 'B' suffixes denote variants within Casio's YL-4 line, but both take the same 4824B001 lamp module, so the difference does not change which part you need to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I be sure this fits my LV-7590?\u003c\/strong\u003e\u003cbr\u003eCanon lists 4824B001, also known as LV-LP33, as the lamp for the LV-7590 specifically, with no other Canon model sharing this part. Matching that single model number is enough to confirm the fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much use will the 4824B001 module typically give before replacement?\u003c\/strong\u003e\u003cbr\u003e4824B001 is rated for 2,000 hours at 330W. Real-world lamp life varies with usage, including how long the projector runs per session and how often it is switched on and off.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182620029164,"sku":"LA-08583","price":280.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20506-xl.png?v=1786955677"},{"product_id":"yl-3a-projector-lamp-module","title":"YL-3A projector lamp module","description":"\u003cp\u003eCasio's XJ-S32, XJ-S33, XJ-S37 and XJ-S38 projectors, along with the model badged simply YL-3A\/3B, all take the same lamp module, YL-3A. It comes as one complete unit with the bulb already seated in its housing. Casio has not published a wattage or rated-hours figure for this particular module.\u003c\/p\u003e\u003cp\u003eCasio's own documentation sometimes shows this part as YL-3B rather than YL-3A; the two numbers describe the same module, and either will bring up this listing. As a complete unit, fitting it means exchanging the whole lamp-and-housing assembly from your XJ-S32, XJ-S33, XJ-S37 or XJ-S38 rather than just a bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11822\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs YL-3B a different lamp from YL-3A?\u003c\/strong\u003e\u003cbr\u003eNo, YL-3B is an alternative code for the identical module. Casio's own manuals use both numbers interchangeably for the same part fitted to the XJ-S32 to XJ-S38 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes YL-3A fit the projector simply labelled YL-3A\/3B?\u003c\/strong\u003e\u003cbr\u003eYes, that model name refers to a Casio projector directly named after its own lamp code, and it takes this same YL-3A module just like the XJ-S range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't a lamp life figure given for the YL-3A?\u003c\/strong\u003e\u003cbr\u003eCasio has not published rated-hours data for this module in the documentation available to us, so we have left the figure out rather than estimate it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat condition should the old module be in before I remove it?\u003c\/strong\u003e\u003cbr\u003eIt should be fully cool; leave the projector switched off and unplugged for at least half an hour before opening the lamp door and lifting the module out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this module be ordered for the XJ-S33 specifically?\u003c\/strong\u003e\u003cbr\u003eYes, the XJ-S33 shares the same lamp compartment as the XJ-S32, XJ-S37 and XJ-S38, so YL-3A is the correct module for all four models without any exceptions.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182633070828,"sku":"LA-11822","price":281.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/33761-xl.png?v=1786962482"},{"product_id":"yl-30-projector-lamp-module","title":"YL-30 projector lamp module","description":"\u003cp\u003eThe Casio XJ-350 takes a single dedicated lamp module, YL-30, sold complete with its housing rather than as a loose bulb. Casio has not published a wattage or rated-hours figure for this part, so this listing covers what is known: fitment, module format and how it can be ordered accurately.\u003c\/p\u003e\u003cp\u003eThere is no alternative part number recorded for YL-30 beyond the code itself, which makes ordering straightforward provided your projector is confirmed as an XJ-350. Because the lamp and housing form one sealed unit, replacement involves swapping the whole assembly rather than separating a bulb from an existing cage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11818\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs YL-30 sold for any Casio projector other than the XJ-350?\u003c\/strong\u003e\u003cbr\u003eNo, we list YL-30 as specific to the XJ-350. If your projector is a different XJ model, check its own model plate before ordering this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is there only one part number for this module?\u003c\/strong\u003e\u003cbr\u003eWe haven't found an alternative code published for YL-30, so the single reference is what to use when ordering the lamp for your Casio XJ-350 projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the YL-30 module include the lamp housing?\u003c\/strong\u003e\u003cbr\u003eYes, it is supplied as a complete unit with the bulb already fitted inside its housing, ready to install in place of the projector's original module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know it's time to replace the XJ-350's lamp?\u003c\/strong\u003e\u003cbr\u003eA drop in brightness, a change in colour balance, or a lamp warning on the projector's display are the usual signs that a new module is due.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I let the projector cool before opening the lamp compartment?\u003c\/strong\u003e\u003cbr\u003eYes, switch off and unplug the XJ-350 and give it time to cool fully, since the housing can retain heat for a while after use.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182633791724,"sku":"LA-11818","price":261.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/30287-xl.png?v=1786959239"},{"product_id":"yl-31-projector-lamp-module","title":"YL-31 projector lamp module","description":"\u003cp\u003eCasio built the XJ-360 around a single dedicated lamp module, YL-31, and this is the only model it is listed against. Like other Casio modules in this range, it arrives as a sealed unit with the bulb already fitted inside its housing, and no wattage or lamp-life figure has been published for it.\u003c\/p\u003e\u003cp\u003eWe record no alternative part number for YL-31, so this single code is what you need when ordering for an XJ-360. Since it is supplied as a complete module, fitting it means exchanging the whole lamp-and-housing assembly, so there is no separate bare bulb to buy for this particular projector.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11819\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs YL-31 interchangeable with YL-30?\u003c\/strong\u003e\u003cbr\u003eNo, YL-30 is the module for the XJ-350, a different model. YL-31 is specific to the XJ-360, so check your projector's model plate before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's inside the box when I order YL-31?\u003c\/strong\u003e\u003cbr\u003eA complete lamp module: the bulb pre-installed in its own housing, ready to fit into the XJ-360 in place of the old unit once it has been removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Casio publish a wattage figure for the XJ-360's lamp?\u003c\/strong\u003e\u003cbr\u003eNot that we have found, so we haven't stated one here rather than guess. The listing instead focuses on what is confirmed: fitment and module format.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow often does the XJ-360 typically need a new lamp?\u003c\/strong\u003e\u003cbr\u003eThis depends heavily on how many hours the projector runs and at what brightness setting, so watch for dimming or colour shift rather than relying on a fixed schedule.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it normal for the old module to feel loose when removed?\u003c\/strong\u003e\u003cbr\u003eLamp modules are designed to click or slide out once the retaining screw is released, so a little give is normal; genuine looseness beforehand may point to a worn latch.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182634447084,"sku":"LA-11819","price":261.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"yl-5a-projector-lamp-module","title":"YL-5A projector lamp module","description":"\u003cp\u003eCasio's XJ-S52 and XJ-S57 projectors share a single lamp module, YL-5A, supplied as a complete unit with the bulb already fitted inside its housing. As with several of Casio's other modules, no wattage or rated-hours figure has been published, so this listing focuses on fitment and how to order it correctly.\u003c\/p\u003e\u003cp\u003eNo alternative part number is recorded for YL-5A, so that code alone is what to search for or quote whether your projector is the XJ-S52 or the XJ-S57. Being a full module, replacement means swapping the entire lamp-and-housing assembly rather than fitting a bare bulb into your existing cage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11826\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes one YL-5A module really fit two different projector models?\u003c\/strong\u003e\u003cbr\u003eYes, the XJ-S52 and XJ-S57 share the same lamp compartment, so a single YL-5A module is correct for both without any variation between them at all.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a bare-bulb option for the XJ-S52?\u003c\/strong\u003e\u003cbr\u003eNo, Casio supplies this lamp only as a complete sealed module, so YL-5A is available as the full housed unit rather than a bulb-only part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm my projector is an XJ-S57 and not a similarly named model?\u003c\/strong\u003e\u003cbr\u003eCheck the model number printed on the base or rear panel; Casio's XJ-S range includes several close model names, so the plate is the reliable way to confirm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should the spent YL-5A from a Casio XJ-S52 end up?\u003c\/strong\u003e\u003cbr\u003eTake it to a facility that accepts electronic waste rather than general rubbish, since projector lamps contain pressurised gas that needs proper handling once removed from the projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill fitting YL-5A affect any picture settings on the XJ-S52?\u003c\/strong\u003e\u003cbr\u003eNo, the lamp module only supplies light; your projector's picture settings, inputs and configuration are stored separately and are not affected by a lamp change.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182635102444,"sku":"LA-11826","price":261.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"yl-40-projector-lamp-module","title":"YL-40 projector lamp module","description":"\u003cp\u003eFor the Casio XJ-450, the matching lamp module is YL-40, sold complete with the bulb already fitted inside its housing. This listing is the only model YL-40 is recorded against. No wattage or rated-hours figure has been published for it, so specifications here are limited to what Casio confirms.\u003c\/p\u003e\u003cp\u003eWe hold no alternative part number for YL-40 beyond this single code, so it is what to quote when ordering for an XJ-450. Since the lamp is supplied as a sealed module rather than a bare bulb, fitting a replacement means exchanging the whole assembly that came out of the projector.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11823\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs YL-40 the same lamp as YL-30 or YL-31?\u003c\/strong\u003e\u003cbr\u003eNo, each of these codes is specific to a different Casio XJ model. YL-40 is built for the XJ-450 alone, so check your projector's plate before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat form does the XJ-450's lamp part take?\u003c\/strong\u003e\u003cbr\u003eIt is a sealed module, with the bulb pre-fitted inside its own housing, so there is no separate bare-bulb version available for this particular Casio projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I access the lamp compartment on the XJ-450?\u003c\/strong\u003e\u003cbr\u003eMost Casio XJ models have a lamp door on the top or underside secured by a captive screw, though it's worth checking your specific unit's manual for the exact location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat signs suggest the XJ-450's lamp is nearing the end of its life?\u003c\/strong\u003e\u003cbr\u003eReduced brightness, a shift in colour balance, or flickering are the usual indicators, along with any on-screen lamp warning the projector may display once it starts to fail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Casio catalogue this lamp under any other reference?\u003c\/strong\u003e\u003cbr\u003eNot that we have on record; we identify this part solely by the code YL-40, which is what to use when ordering for the XJ-450.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182635790572,"sku":"LA-11823","price":261.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"yl-33-projector-lamp-module","title":"YL-33 projector lamp module","description":"\u003cp\u003eTwo brands converge on one lamp module here: Casio's XJ-S30, XJ-S31, XJ-S35 and XJ-S36 projectors, and Infocus's SP-LAMP-029 listing, all take YL-33. It is supplied as a complete unit, with the bulb pre-fitted inside its housing, covering five model listings across the two brands from this one module.\u003c\/p\u003e\u003cp\u003eInfocus references this identical module under its own code, SP-LAMP-029, while Casio's documentation also shows YL-35 alongside YL-33 for the same lamp; all these numbers point to one part. As a full module, fitting it replaces the entire lamp-and-housing assembly rather than just the bulb inside your projector.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11820\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does an Infocus projector take a Casio-coded lamp?\u003c\/strong\u003e\u003cbr\u003eInfocus's SP-LAMP-029 listing uses the same internal lamp design as Casio's XJ-S30 range, so the two brands share this module even though their part numbers differ.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs YL-35 a different lamp from YL-33?\u003c\/strong\u003e\u003cbr\u003eNo, Casio's own documentation lists YL-35 alongside YL-33 for the identical module, so either reference orders the same part for the XJ-S30 to XJ-S36 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes YL-33 fit the Casio XJ-S36 as well as the XJ-S30?\u003c\/strong\u003e\u003cbr\u003eYes, all four Casio models in this range, the XJ-S30, XJ-S31, XJ-S35 and XJ-S36, share the same YL-33 lamp module without any exceptions at all.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering if I own the Infocus projector?\u003c\/strong\u003e\u003cbr\u003eConfirm your unit's part reference reads SP-LAMP-029, since that is the Infocus code for this identical module, before ordering it here under the Casio code YL-33.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bare version of YL-33 available for any of these models?\u003c\/strong\u003e\u003cbr\u003eNo, across both the Casio and Infocus listings this lamp is supplied only as a complete module with the housing attached, never as a separate bulb.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182636806380,"sku":"LA-11820","price":174.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/33749-xl.png?v=1786962498"},{"product_id":"casio-xj-s41-projector-lamp-module","title":"Casio XJ-S41 lamp module","description":"\u003cp\u003eWe list this lamp module by the projector it fits rather than a manufacturer part code, since none is available to us. It covers five closely related Casio models: the XJ-S41, XJ-S42, XJ-S46, XJ-S47 and XJ-SC215, all of which share the same lamp compartment and take this identical module.\u003c\/p\u003e\u003cp\u003eBecause no part number is published for this lamp, ordering by projector model is the reliable route, so double-check your unit's model plate reads XJ-S41, XJ-S42, XJ-S46, XJ-S47 or XJ-SC215 before buying. It is supplied as a complete module, with the bulb already fitted inside its housing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12135\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy doesn't this listing show a manufacturer part number?\u003c\/strong\u003e\u003cbr\u003eNo official code has been published for this lamp, so we identify it by the five Casio projector models it fits rather than a part reference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the same lamp really work in five different models?\u003c\/strong\u003e\u003cbr\u003eYes, the XJ-S41, XJ-S42, XJ-S46, XJ-S47 and XJ-SC215 share a common lamp compartment, so one module design covers all five without any adjustment needed at all.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm which of the five listed projectors matches mine?\u003c\/strong\u003e\u003cbr\u003eCheck the model number on your projector's base or rear panel and match it exactly against XJ-S41, XJ-S42, XJ-S46, XJ-S47 or XJ-SC215 before placing your order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp sold as a bare bulb for any of these models?\u003c\/strong\u003e\u003cbr\u003eNo, it is supplied only as a complete module with the housing attached, across the whole XJ-S41 to XJ-SC215 range covered by this particular listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if my Casio projector isn't one of the five listed here?\u003c\/strong\u003e\u003cbr\u003eThen this particular module isn't the right match; a different XJ model will need its own specific lamp, so it's worth checking our other Casio listings.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182672752876,"sku":"LA-12135","price":213.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/37167-xl.png?v=1786965723"},{"product_id":"casio-xl-300-projector-lamp","title":"Casio XL-300 bare projector lamp","description":"\u003cp\u003eNo manufacturer code is available for the lamp behind Casio's XL-300, so we identify this part by the projector itself rather than a part number. It comes as a bare bulb, without a housing, made to fit into the cage already installed inside your XL-300.\u003c\/p\u003e\u003cp\u003eAs there is no part number on record for this lamp, ordering it correctly comes down to confirming your projector's model plate reads XL-300. Being a bare bulb, it does not include a housing or bracket, so check that your existing cage is undamaged before fitting the replacement.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08608\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy is this lamp identified by projector model instead of a part code?\u003c\/strong\u003e\u003cbr\u003eNo manufacturer part number has been published for the XL-300's lamp, so we list it by the projector it fits, which is the clearest way to order the right bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat exactly will I receive when this bulb arrives?\u003c\/strong\u003e\u003cbr\u003eThe bare lamp only, without any housing, designed to fit inside the housing that is already installed inside your Casio XL-300 projector, ready to receive the new bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm my Casio projector is genuinely an XL-300?\u003c\/strong\u003e\u003cbr\u003eCheck the model number printed on the underside or rear of the unit, since Casio's older XL range includes several similarly named models worth ruling out first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat condition should the existing housing be in before I fit this bulb?\u003c\/strong\u003e\u003cbr\u003eIt should be free of cracks and with its retaining clips intact, since this bare lamp relies entirely on your current housing to hold it in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a photo of the actual bulb on this listing?\u003c\/strong\u003e\u003cbr\u003eNo, we don't hold a genuine photograph for this part, so the image shown is a generic representation rather than the specific bulb you'll receive.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182672883948,"sku":"LA-08608","price":135.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"}],"url":"https:\/\/www.lampsauthority.com\/collections\/casio-projector-lamps.oembed","provider":"Lamps Authority","version":"1.0","type":"link"}