{"title":"Canon projector lamps","description":"\u003cp\u003eReplacement projector lamps for Canon projectors — 84 lamps catalogued. Available as bare lamps (the bulb alone, fitted into the housing already in your projector) and as complete modules (bulb and housing together, ready to drop straight in).\u003c\/p\u003e\u003cp\u003eEvery lamp carries a genuine Philips, Osram or Ushio burner, ships free worldwide, and is covered by a 180-day guarantee. If you are not sure which your projector takes, check the code on the old lamp or send us a photo of the label.\u003c\/p\u003e","products":[{"product_id":"610-290-8985-projector-lamp","title":"610-290-8985 bare projector lamp","description":"\u003cp\u003eWith 37 compatible projectors, 610-290-8985 is one of the more widely shared lamps in our range, rated at 150 watts for 2,000 hours. It covers Sanyo's PLC-SU and PLC-XU series, Canon's LV-7320 and LV-7325, Eiki's LC-NB and LC-XNB2 ranges, three Proxima Ultralight models and the Boxlight CP-11T, CP-13T and CP-33T.\u003c\/p\u003e\u003cp\u003eThis lamp has passed through several rebrands, so you may see it as 610-280-6939, 6102908985, CP13T-930, LAMP-019, LV-LP05, POA-LMP21 or POA-LMP33 depending on which manufacturer's label is on your machine; all of these refer to the same bare bulb. Since no housing is included, it fits back inside your projector's existing lamp cage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08494\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 37 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis lamp has so many codes, how do I know they all match?\u003c\/strong\u003e\u003cbr\u003e610-290-8985 was sold under different numbers by Sanyo, Canon, Eiki and Proxima as they rebadged the same underlying design, so 610-280-6939, LAMP-019, LV-LP05, POA-LMP21 and POA-LMP33 are all the same part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy Sanyo projector isn't in the list, could it still take this lamp?\u003c\/strong\u003e\u003cbr\u003eOnly the Sanyo models shown in the compatibility list, such as the PLC-SU20 and PLC-XU22 ranges, are confirmed to use this lamp; a similarly named model outside that list may need a different part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a complete module or just the bulb?\u003c\/strong\u003e\u003cbr\u003e610-290-8985 is a bare lamp, supplied without housing, so it is intended to be fitted inside the lamp cage already built into your Sanyo, Canon, Eiki or Proxima projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does buying an 'original' lamp mean here?\u003c\/strong\u003e\u003cbr\u003eIt means the bulb itself is the same type originally specified for these projectors, rather than a generic substitute; the part numbers listed match what the projector manufacturers issued for this lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow urgent is it to replace a lamp once it dims?\u003c\/strong\u003e\u003cbr\u003eA dimming lamp will usually keep working for a while longer, but image quality and brightness drop steadily, so most people replace it once the projector reports the lamp is near the end of its rated hours.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182571696364,"sku":"LA-08494","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"610-287-5379-projector-lamp","title":"610-287-5379 bare projector lamp","description":"\u003cp\u003eNineteen projectors across five brands share the 610-287-5379 lamp, a 120-watt bulb rated at 2,000 hours. It fits Sanyo's PLC-SU07, PLC-SU10 and PLC-SU15 ranges, Canon's LV-5300 and LV-5300E, the Eiki LC-NB1 family, the Proxima UltraLight LS1, and the Boxlight CP-10T, CP-7T and CP-X10T.\u003c\/p\u003e\u003cp\u003eDepending on which brand's label is on your projector, this lamp may be marked CP10T-930, LV-LP01, LV-LP07 or POA-LMP27 rather than 610-287-5379, but all four are the same bare bulb. It has no housing of its own, so it is fitted into the lamp cage already inside your Sanyo, Canon, Eiki, Proxima or Boxlight machine.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08492\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 19 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eI have a Canon projector, will this really be the same lamp as the Sanyo version?\u003c\/strong\u003e\u003cbr\u003eYes, Canon's LV-5300 and LV-5300E share their internal design with the listed Sanyo, Eiki, Proxima and Boxlight models, so 610-287-5379 fits all of them despite the different branding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the code on my old lamp read LV-LP01 instead of 610-287-5379?\u003c\/strong\u003e\u003cbr\u003eCanon used LV-LP01 as its own code for this lamp, while Sanyo and others used 610-287-5379, CP10T-930, LV-LP07 or POA-LMP27; they are all the same bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a housing part of this order?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare lamp, so the housing already fitted inside your projector stays in place and only the bulb itself is replaced when you fit this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the safest way to remove the old lamp?\u003c\/strong\u003e\u003cbr\u003eSwitch the projector off and leave it to cool before opening the lamp compartment, then handle the old and new lamps by their base or frame rather than the glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I make sure the replacement will actually fit?\u003c\/strong\u003e\u003cbr\u003eMatch the code on your existing lamp against 610-287-5379 or its alternatives, and check your exact projector model, such as PLC-SU10 rather than a similarly numbered Sanyo model, against the list above.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182573924588,"sku":"LA-08492","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/31984-lg.png?v=1786959659"},{"product_id":"lv-lp04-projector-lamp-module","title":"LV-LP04 projector lamp module","description":"\u003cp\u003eTwenty-four projectors from five brands rely on the LV-LP04 module, a 150-watt lamp rated at 2,000 hours and supplied complete with housing. It fits Canon's LV-7500 and LV-7510, Eiki's LC-S880 and LC-X983 ranges, several Sanyo PLC-XP models, two Proxima DP-9250 projectors, and the Boxlight MP-25T and MP-35T.\u003c\/p\u003e\u003cp\u003eThis lamp has picked up several codes over the years, including 610-279-5417, LAMP-014, MP35T-930, LV-LP02, POA-LMP18 and POA-LMP18J, so cross-check whichever one is printed on your old lamp against this list. Because it is a module, the housing comes fitted already, and the whole assembly is swapped as one piece rather than just the bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08516\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 24 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need to match the exact code, or will any of the alternatives do?\u003c\/strong\u003e\u003cbr\u003eAny of the codes we list, LV-LP04, LAMP-014, MP35T-930, POA-LMP18 or the others, point to the same lamp, so matching any one of them against your old part confirms the fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is 610 279 5417 sometimes written with spaces and sometimes with dashes?\u003c\/strong\u003e\u003cbr\u003eDifferent suppliers format the same code differently; 610 279 5417 and 610-279-5417 refer to the identical number, so punctuation differences don't change whether it fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the housing come already attached to this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, LV-LP04 is sold as a complete module with the housing fitted, so you fit the whole unit into the lamp bay rather than swapping just the bulb into an old cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which of the 24 listed projectors is mine?\u003c\/strong\u003e\u003cbr\u003eCheck the model number printed on your projector's case or in its on-screen menu against the brand-by-brand list above, since Canon, Eiki, Sanyo, Proxima and Boxlight all badge this same design differently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if I keep using the projector after the lamp is due for replacement?\u003c\/strong\u003e\u003cbr\u003eThe image will usually keep getting dimmer and may develop colour shifts, and in some cases the projector will refuse to start once its internal lamp-hours counter is well past the 2,000-hour mark.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182574907628,"sku":"LA-08516","price":135.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/36728-xl.png?v=1786965471"},{"product_id":"lv-lp18-projector-lamp-module","title":"LV-LP18 projector lamp module","description":"\u003cp\u003eThis module, LV-LP18, is shared by 42 projectors spanning five brands, running at 200 watts for 2,000 hours with the housing built in. It covers Canon's LV-7210 through LV-7230, the Christie LX25 and Vivid LX25, sixteen Eiki LC-XB models, the Boxlight CP-320ta and DVN-C65M, and a wide range of Sanyo PLC-XU and PLC-XE projectors.\u003c\/p\u003e\u003cp\u003eOlder stock or third-party listings may show this lamp as 03-000754-01P, 610-309-2706, CP320TA-930, LMP55, POA-LMP55 or ET-SLMP55, all of which are the same part as LV-LP18. Because it comes as a complete module, the housing is included, so the whole assembly is fitted as one piece rather than transferring a bulb into your old cage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08505\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 42 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWith so many brands listed, how do I know which code matches my old lamp?\u003c\/strong\u003e\u003cbr\u003eCanon, Christie, Eiki, Sanyo and Boxlight have each used a different code for this identical lamp over time, so match whichever of LV-LP18, LMP55, POA-LMP55 or the other alternatives appears on your existing part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the housing supplied with this module?\u003c\/strong\u003e\u003cbr\u003eYes, LV-LP18 is sold as a complete module with the housing already fitted, so the entire assembly is installed together rather than the bulb alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy Eiki projector is an LC-XB model not listed by exact number, will it still fit?\u003c\/strong\u003e\u003cbr\u003eThe listing covers LC-XB15 through LC-XB30 and their D variants, so if your model number falls within that range it is confirmed to take this lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the benefit of choosing a module over the bare LV-LP18 lamp?\u003c\/strong\u003e\u003cbr\u003eA module replaces the housing as well as the bulb, which is worth doing if your current housing shows wear, cracking or a loose connector alongside a failing lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I safely remove the old module before fitting this one?\u003c\/strong\u003e\u003cbr\u003eSwitch the projector off, unplug it, and let it cool fully before opening the lamp compartment, then release whatever screws or catches hold the module in place before lifting it out.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182579429612,"sku":"LA-08505","price":123.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20481-xl.png?v=1786955676"},{"product_id":"01-00161-projector-lamp-module","title":"01-00161 projector lamp with module","description":"\u003cp\u003e01-00161 is a 190W complete module rated to 2000 hours, covering 36 projectors, among the widest ranges in this catalogue. It spans the NEC VT670 and VT676 families, the Canon LV-7240, LV-7245 and LV-7255, the Dukane Image Pro 8070, 8767A, 8769 and 8775, and the Smartboard 2000i and 3000i DVX ranges.\u003c\/p\u003e\u003cp\u003eCanon's own reference for this lamp is LV-LP24, and NEC also sold it as VT75LP and VT75LPE, alongside further Dukane and Utax codes listed on this page. With this many compatible brands, confirm your exact model name against the full list above before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 190 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-07861\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 36 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs LV-LP24 the same lamp as 01-00161?\u003c\/strong\u003e\u003cbr\u003eYes, LV-LP24 is Canon's own code for this lamp, alongside NEC's VT75LP and VT75LPE. All describe the identical module we list as 01-00161, so any of these references will match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes 01-00161 fit the Smartboard 2000i?\u003c\/strong\u003e\u003cbr\u003eYes, it covers the Smartboard 2000i DVX and several 2000i and 3000i DVX variants, as well as the NEC, Canon, Dukane and Utax models listed above.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp cover so many different brands?\u003c\/strong\u003e\u003cbr\u003eNEC's projector engine was used as the basis for rebadged units from Canon, Dukane, Smartboard, Triumph-Adler and Utax, so they all share this same lamp under their own part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 01-00161 a bare bulb or a complete module?\u003c\/strong\u003e\u003cbr\u003eIt is a complete module with the housing already fitted, so you replace the whole lamp assembly rather than transferring a bare bulb into your existing housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I make sure I order the right Canon model?\u003c\/strong\u003e\u003cbr\u003eCanon's LV-7240, LV-7245 and LV-7255 are separate listings, so check the exact suffix on your projector's badge against the compatibility list above before ordering to avoid a mismatch.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182580347116,"sku":"LA-07861","price":125.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20302-xl.png?v=1786955682"},{"product_id":"lv-lp18-projector-lamp","title":"LV-LP18 bare projector lamp","description":"\u003cp\u003eThirty-seven projectors take the bare version of LV-LP18, a 200-watt lamp rated at 2,000 hours with no housing included. It fits Canon's LV-7210 to LV-7230, the Christie LX25 and Vivid LX25, fourteen Eiki LC-XB models, the Boxlight CP-320ta, and a long list of Sanyo PLC-XU, PLC-XE, PLC-XL and PLC-SU55 projectors.\u003c\/p\u003e\u003cp\u003eYou may find this same bulb marked 03-000754-01P, 610-309-2706, CP320TA-930, POA-LMP55 or ET-SLMP55, depending on which brand's label is on your projector. As a bare lamp it has no housing of its own, so fitting it means placing the new bulb into the housing that already exists inside your Canon, Christie, Eiki, Sanyo or Boxlight machine.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08504\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 37 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the LV-LP18 module listed separately?\u003c\/strong\u003e\u003cbr\u003eThis is the bare bulb only, for when your existing housing is still sound; the module listing includes a fresh housing built in, for when the housing needs replacing too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do the alternative codes differ slightly between the bare and module listings?\u003c\/strong\u003e\u003cbr\u003eSuppliers sometimes format or catalogue the bare bulb and the complete module under slightly different reference numbers, even though the underlying lamp, 03-000754-01P, 610-309-2706, POA-LMP55 or ET-SLMP55, is the same.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the housing come with this bare lamp?\u003c\/strong\u003e\u003cbr\u003eNo, this version is the bulb only, so the housing already fitted inside your Canon, Christie, Eiki, Sanyo or Boxlight projector is reused rather than replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy Sanyo model is a PLC-XU58, is that covered?\u003c\/strong\u003e\u003cbr\u003eYes, the PLC-XU58 is one of the Sanyo models listed for this lamp, alongside the PLC-XU47, PLC-XU48, PLC-XU50, PLC-XU51 and PLC-XU55 among the other Sanyo projectors this bulb fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's a sensible time to swap this lamp out?\u003c\/strong\u003e\u003cbr\u003eMost people replace it once the picture has visibly dimmed or the projector's lamp-hours counter is approaching the 2,000-hour rating, rather than waiting for the lamp to fail outright.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182580543724,"sku":"LA-08504","price":148.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lv-lp13-projector-lamp","title":"LV-LP13 bare projector lamp","description":"\u003cp\u003eSeven brands share the LV-LP13 bare lamp across 34 projectors, running at 200 watts with a 1,000-hour rating, shorter than many lamps in our range. It fits Christie's LW25, LW26, LX26 and LX35 models, Eiki's LC-X985 and LC-X1000 ranges, Sanyo's PLV-70 and PLV-75 and several PLC-XP models, Canon's LV-7545, two Proxima projectors, three Boxlight models, and the Studio Experience Cinema 20HD.\u003c\/p\u003e\u003cp\u003eThis lamp carries an unusually long list of codes, including 003-120061, 03-000649-02P, 610-293-5868, 610-325-2940, LAMP-032, MP41T-930, POA-LMP38 and POA-LMP99, with the Studio Experience branded versions repeating several of these under an 'Experience' label. All of them refer to the identical bare bulb, which fits into the housing already inside your projector.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08490\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 34 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does my lamp have 'Experience' written before the code?\u003c\/strong\u003e\u003cbr\u003eStudio Experience, the brand behind the Cinema 20HD, printed its own labels with 'Experience' ahead of the same reference numbers, such as Experience LAMP-032 or Experience LV-LP13, but the lamp itself is identical to LV-LP13.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the lamp life only 1,000 hours when others are longer?\u003c\/strong\u003e\u003cbr\u003eThe 1,000-hour figure is simply what's specified for LV-LP13; lamp life varies between designs, and this one is rated shorter than the 2,000-hour lamps common elsewhere in our range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bare lamp include the housing?\u003c\/strong\u003e\u003cbr\u003eNo, LV-LP13 is a bare bulb only, meant to be fitted into the housing already built into your Christie, Eiki, Sanyo, Canon, Proxima or Boxlight projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector is a Sanyo PLV-75L, is that covered by this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, the PLV-75L appears alongside the PLV-70, PLV-70L and PLV-75 as one of the Sanyo models we confirm use LV-LP13, based on the projector's own specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know this lamp has reached the end of its rated life?\u003c\/strong\u003e\u003cbr\u003eSince it's rated at 1,000 hours, a shorter span than many lamps, keep an eye on brightness sooner than you might with other projectors, and treat a dimming or flickering picture as a sign it's due.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182584541420,"sku":"LA-08490","price":148.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/31995-lg.png?v=1786959669"},{"product_id":"610-303-5826-projector-lamp-module","title":"610-303-5826 projector lamp with module","description":"\u003cp\u003eBoxlight, Canon, Eiki and Sanyo each sell projectors that take the 610-303-5826, fifteen models in total including the Canon LV-5200 and the Sanyo PLC-XU36. This version is a Projector Lamp with Module, so the bulb arrives already fitted into its own housing rather than needing your old one reused. It runs at 250 watts for 2,000 hours.\u003c\/p\u003e\u003cp\u003eThe same lamp is sold under several codes — CP12TA-930, LV-LP16, POA-LMP53 and POA-LMP94 among them — depending on which brand issued it, so don't be put off if a listing uses a different number to 610-303-5826. Because this is a full module, fitting it doesn't depend on the condition of your old housing.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 250 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08499\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 15 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy are there so many part numbers for one lamp?\u003c\/strong\u003e\u003cbr\u003eBoxlight, Canon, Eiki and Sanyo have each sold projectors built around this same lamp and given it their own code — CP12TA-930, LV-LP16, POA-LMP53 and POA-LMP94 are all names for what we list as 610-303-5826.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 610-303-5826 a bulb-only lamp?\u003c\/strong\u003e\u003cbr\u003eNo, it's listed as a Projector Lamp with Module, meaning the bulb comes pre-fitted in a new housing. That's different from a bare lamp, which relies on your projector's existing housing staying in good condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo models take this lamp?\u003c\/strong\u003e\u003cbr\u003eEight Sanyo models are listed for the 610-303-5826, including the PLC-SU2000, PLC-SU40 and PLC-XU36 among others. Check your unit's exact model name against the full compatibility list before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I fit a module-style replacement lamp?\u003c\/strong\u003e\u003cbr\u003eBecause this version includes its own housing, fitting means removing the old module as a unit and placing the new one in the same slot, then reconnecting it the same way the old one was connected. Always let the projector cool first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated life of the 610-303-5826?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 2,000 hours running at 250 watts. This applies across all fifteen listed projectors from Boxlight, Canon, Eiki and Sanyo, since they share the same lamp and module design.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182590079212,"sku":"LA-08499","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28665-xl.png?v=1786959189"},{"product_id":"03-000750-01p-projector-lamp","title":"03-000750-01P bare projector lamp","description":"\u003cp\u003eChristie's LX37 and LX45, both in standard and Vivid form, take the 03-000750-01P, along with the Canon LV-7555, the Boxlight MP-45t and four Eiki LC-X50 variants. Rated at 300 watts with a 2,000-hour life, it's supplied as a bare lamp for fitting into your projector's existing housing. It is also known as LV-LP17 and POA-LMP67.\u003c\/p\u003e\u003cp\u003eFive brands have issued their own code for this lamp — 610-306-5977, LV-LP17 and POA-LMP67 alongside 03-000750-01P — so a listing under any of these numbers points to the same part. Since it's bare, order it only once you've confirmed the housing already fitted to your projector is intact.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 300 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08522\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 15 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the Christie LX37 use the same lamp as the LX45?\u003c\/strong\u003e\u003cbr\u003eYes. Both the Christie LX37 and LX45, including their Vivid-branded versions, are listed for the 03-000750-01P. It also fits ten other projectors across Boxlight, Canon, Eiki and Sanyo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs LV-LP17 the Canon code for this part?\u003c\/strong\u003e\u003cbr\u003eYes, LV-LP17 is the code Canon has used for this lamp, which we list under 03-000750-01P. The same part also appears as 610-306-5977 and POA-LMP67 under other brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many Eiki projectors take this lamp?\u003c\/strong\u003e\u003cbr\u003eFour Eiki models are listed: the LC-X50, LC-X50D, LC-X50DM and LC-X50M. Confirm which of these matches your unit before ordering, since Eiki's other ranges use different lamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the rated wattage for 03-000750-01P?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 300 watts with a service life of 2,000 hours. These figures are the same across all fifteen listed projectors, since they share the same lamp specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't there a photo of the actual lamp on this listing?\u003c\/strong\u003e\u003cbr\u003eWe don't hold a genuine product photo for every part we stock, and 03-000750-01P is one of them, so the image shown here is a generic placeholder rather than the lamp itself.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182591652076,"sku":"LA-08522","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"003-120333-01-projector-lamp","title":"003-120333-01 bare projector lamp","description":"\u003cp\u003eAt 330 watts, the 003-120333-01 is one of the higher-powered lamps we stock, built for nine projectors including the Christie LS650 and LX650, the Canon LV-7585 and four Sanyo PLC-XP100 variants. It carries a 2,000-hour rating and ships as a bare lamp for fitting into your projector's own housing. Canon also lists this part as LV-LP29.\u003c\/p\u003e\u003cp\u003eYou'll also see this lamp listed as 610-334-2788 or POA-LMP108, both alternative codes for the same part as 003-120333-01. Given the higher 330-watt rating, make sure your projector's ventilation is clear and its existing housing undamaged before fitting a bare lamp of this size.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08580\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 9 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo projectors take the 003-120333-01?\u003c\/strong\u003e\u003cbr\u003eFour are listed: the PLC-XP100, PLC-XP1000CL, PLC-XP100K and PLC-XP100L. It's also listed for the Canon LV-7585, two Christie models and two Eiki models, nine projectors in total across four brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs POA-LMP108 a different lamp to 003-120333-01?\u003c\/strong\u003e\u003cbr\u003eNo, POA-LMP108 is the same lamp, listed under a Sanyo code. The alternatives 610-334-2788 and LV-LP29 also refer to this same part, so any of the four codes should bring up this listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated wattage of this lamp?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 330 watts with a 2,000-hour service life, higher than many of the bare lamps we stock, and this applies across all nine listed projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Christie LX650 need a different lamp to the LS650?\u003c\/strong\u003e\u003cbr\u003eNo, both the Christie LS650 and LX650 are listed for the 003-120333-01, so the same lamp covers either model, along with the Canon LV-7585, two Eiki models and four Sanyo models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen is it time to replace a projector lamp like this one?\u003c\/strong\u003e\u003cbr\u003eA lamp nearing the end of its rated 2,000 hours, or one that's dimmed, flickering or triggered a warning light on the projector, is generally due for replacement. Running hours logged by the projector itself are usually the clearest signal.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182594011372,"sku":"LA-08580","price":155.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lv-lp22-projector-lamp-module","title":"LV-LP22 projector lamp with module","description":"\u003cp\u003eThe High End Systems DL.2 shares its lamp with twenty Canon, Christie, Eiki and Sanyo projectors, all taking the LV-LP22. Supplied as a full module at 300 watts and 1,500 hours rated life, it's also sold under the codes 03-000882-01P, 55030070, 610-314-9127 and POA-LMP81.\u003c\/p\u003e\u003cp\u003eBecause this lamp spans five brands and 21 projectors, don't assume the code alone confirms fitment — check your exact model, whether that's a Canon LV-7565 variant, a Christie LX40 or LX50, or the High End Systems DL.2, against the full list. As a module, the new lamp arrives with its own housing built in.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 300 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08577\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 21 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the High End Systems DL.2 really use a Canon lamp code?\u003c\/strong\u003e\u003cbr\u003eYes, the DL.2 shares its lamp with several Canon, Christie, Eiki and Sanyo projectors. We list the part primarily as LV-LP22, its Canon code, alongside the alternatives POA-LMP81 and 610-314-9127 used by other brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many Sanyo models take the LV-LP22?\u003c\/strong\u003e\u003cbr\u003eTen are listed, including the PLC-XP51, PLC-XP56 and their L-suffixed variants, plus the XP5100 and XP5600. Confirm your exact Sanyo model before ordering given the number of close variants.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between LV-LP22 and 55030070?\u003c\/strong\u003e\u003cbr\u003eThere's no difference in the lamp itself — 55030070 is one of several alternative codes recorded against the part we list as LV-LP22, alongside 03-000882-01P, 610-314-9127 and POA-LMP81.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LV-LP22 rated the same across all its listed projectors?\u003c\/strong\u003e\u003cbr\u003eYes, 300 watts and a 1,500-hour service life apply wherever LV-LP22 is fitted, since all 21 listed projectors share the same lamp and module design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I do if my Eiki model isn't listed here?\u003c\/strong\u003e\u003cbr\u003eIf your exact Eiki model doesn't appear among the four listed here — LC-X60, LC-X70, LC-X70D and LMP81 — it's likely built around a different lamp, and fitting LV-LP22 wouldn't be the right match.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182594830572,"sku":"LA-08577","price":244.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20496-xl.png?v=1786955678"},{"product_id":"lv-lp30-projector-lamp-module","title":"LV-LP30 projector lamp with module","description":"\u003cp\u003eUnlike many of the lamps we list, the LV-LP30 is built for a single projector: the Canon LV-7365. It's supplied as a complete module rated at 200 watts with a 2,000-hour life, and Canon has also issued it under the code 2481B001.\u003c\/p\u003e\u003cp\u003eWith only one compatible projector on file, ordering the LV-LP30 is straightforward provided your unit is a Canon LV-7365. It's listed under two codes, LV-LP30 and 2481B001, both pointing to the same module-style lamp with its housing already built in.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08573\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the LV-LP30 fit any Canon projector besides the LV-7365?\u003c\/strong\u003e\u003cbr\u003eNo, the LV-7365 is the only projector we have on file for this lamp. If your Canon model is different, it will likely need a different lamp code even if it looks similar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 2481B001 the same as LV-LP30?\u003c\/strong\u003e\u003cbr\u003eYes, 2481B001 is an alternative code for the same lamp we list primarily as LV-LP30. Both refer to the module built for the Canon LV-7365.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included when I order a module-style lamp like the LV-LP30?\u003c\/strong\u003e\u003cbr\u003eA Projector Lamp with Module order includes the bulb already fitted inside its own housing, ready to install as a single unit in place of the old one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the LV-LP30 rated to last?\u003c\/strong\u003e\u003cbr\u003eIt carries a 2,000-hour rating at 200 watts. That figure is specific to this lamp and applies to its use in the Canon LV-7365, the only projector listed for this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before fitting a replacement module myself?\u003c\/strong\u003e\u003cbr\u003eMake sure the projector is unplugged and fully cooled, and note how the old module connects before removing it, since the new LV-LP30 module fits into the same slot the same way.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182595420396,"sku":"LA-08573","price":153.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/30780-xl.png?v=1786959293"},{"product_id":"50029924-projector-lamp","title":"50029924 bare projector lamp","description":"\u003cp\u003eNEC's VT480 through VT695 range, nineteen models in all, share their lamp with three Canon projectors — the LV-7250, LV-7260 and LV-7265 — all taking the 50029924. It's a bare lamp rated at 200 watts for 2,000 hours, fitting into the housing your projector already carries. NEC also lists this part as VT85LP.\u003c\/p\u003e\u003cp\u003eThis lamp is also sold as LV-LP26 under Canon's own numbering and as VT85LP under NEC's, so a listing you've seen under either code is the same part as 50029924. As a bare lamp, it depends on your existing housing being sound, since only the bulb is replaced here.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08566\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 22 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do so many NEC VT models share one lamp?\u003c\/strong\u003e\u003cbr\u003eNEC built a large part of its VT range, from the VT480 through to the VT695, around the same lamp engine, which is why nineteen separate model numbers are listed against the 50029924.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs VT85LP the NEC code for this Canon-listed lamp?\u003c\/strong\u003e\u003cbr\u003eYes, VT85LP is NEC's code for the same lamp we list as 50029924, which Canon lists under LV-LP26. All three numbers point to one part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Canon models take the 50029924?\u003c\/strong\u003e\u003cbr\u003eThree are listed: the LV-7250, LV-7260 and LV-7265. If your Canon projector isn't one of these, it's likely built around a different lamp despite similar model naming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is there no genuine photo for this listing?\u003c\/strong\u003e\u003cbr\u003eWe don't hold an actual photograph of the 50029924, so a generic image is shown in its place. The specification and compatibility details on the listing are still specific to this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the rated life of the 50029924?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 2,000 hours at 200 watts, a figure that applies across all 22 listed Canon and NEC projectors, since they share the same lamp specification.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182596698348,"sku":"LA-08566","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lv-lp26-projector-lamp-module","title":"LV-LP26 projector lamp with module","description":"\u003cp\u003eWhere 50029924 is sold as a bare bulb, LV-LP26 is the same lamp supplied as a complete module, housing included. It covers the same Canon LV-7250, LV-7260 and LV-7265 line-up plus twenty-one NEC VT-series models from the VT480 to the VT695G. Rated at 200 watts for 2,000 hours, it's Canon's own code for this part.\u003c\/p\u003e\u003cp\u003eIf you'd rather not rely on your existing housing being in good condition, LV-LP26 gives you a fresh one built in, unlike the bare 50029924 version of the same lamp. NEC lists it as VT85LP; either code will bring up this module.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08567\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 24 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between LV-LP26 and 50029924?\u003c\/strong\u003e\u003cbr\u003eThey're the same lamp, but LV-LP26 is supplied as a complete module with its own housing, while 50029924 is the bare bulb version that fits inside your existing housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich NEC models are covered by LV-LP26?\u003c\/strong\u003e\u003cbr\u003eTwenty-one NEC models are listed, spanning the VT480 through to the VT695G, including the VT490G and VT580G variants. Check your exact model suffix, since NEC used several close variants across this range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a module lamp harder to fit than a bare one?\u003c\/strong\u003e\u003cbr\u003eNot necessarily — a module like LV-LP26 replaces the housing as well as the bulb, so there's no need to inspect or reuse your old housing, which can make fitting more straightforward in some cases.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes LV-LP26 fit the same Canon models as 50029924?\u003c\/strong\u003e\u003cbr\u003eYes, both are listed for the same three Canon models: the LV-7250, LV-7260 and LV-7265. The lamp and rated specification are identical between the two versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does VT85LP refer to?\u003c\/strong\u003e\u003cbr\u003eVT85LP is the code NEC uses for this lamp, which we list under its Canon code, LV-LP26. It's also sold as 50029924 in bare-bulb form.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182597452012,"sku":"LA-08567","price":130.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20491-xl.png?v=1786955681"},{"product_id":"lv-lp19-projector-lamp-module","title":"LV-LP19 projector lamp with module","description":"\u003cp\u003eTwelve Eiki models alone are listed for the LV-LP19, from the LC-SB15 to the LC-XB26D, alongside three Canon LV-5200-series units, the Christie LX25a and nine Sanyo models. Supplied as a full module at 200 watts and rated for 1,500 hours, it's also known as POA-LMP65 and 610-307-7925.\u003c\/p\u003e\u003cp\u003eWith 25 compatible projectors, this is one of the more widely fitted lamps we carry, so take a moment to match your exact Eiki or Sanyo model, since both ranges include several closely named variants. The module design means the new housing arrives already built around the lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08565\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 25 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy are there so many Eiki models listed for LV-LP19?\u003c\/strong\u003e\u003cbr\u003eEiki built twelve models around this same lamp, from the LC-SB15 through to the LC-XB26D, which is why so many of its projectors share the LV-LP19 across our list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs POA-LMP65 the Sanyo code for this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, POA-LMP65 is Sanyo's code for the same lamp we list as LV-LP19. The alternatives 03-000754-02P and 610-307-7925 also refer to this part, all fitting the same 25 listed projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the rated life of the LV-LP19?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 1,500 hours running at 200 watts, a figure that holds across all 25 listed projectors from Canon, Christie, Eiki and Sanyo, whichever brand's code you order it under.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Christie LX25a share its lamp with Canon models?\u003c\/strong\u003e\u003cbr\u003eYes, the Christie LX25a is listed alongside three Canon LV-5200-series projectors and several Eiki and Sanyo models, all taking the same LV-LP19 lamp at 200 watts and 1,500 hours rated life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do alternative lamp codes come about?\u003c\/strong\u003e\u003cbr\u003eWhen several brands sell projectors built around the same underlying lamp, each brand tends to issue it under its own part number. LV-LP19, POA-LMP65, 03-000754-02P and 610-307-7925 are one such set, all naming the same physical lamp.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182598205676,"sku":"LA-08565","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/30815-xl.png?v=1786959291"},{"product_id":"lv-lp40-projector-lamp-module","title":"LV-LP40 projector lamp with module","description":"\u003cp\u003eCanon lists four models against the LV-LP40: the LV-WX300ST, LV-WX310ST, LV-WX320 and 0120C001. It's supplied as a module, complete with housing, rather than a bare bulb. LV-LP40 is the only code on record for this lamp, and no wattage or lamp-life figure is published for it.\u003c\/p\u003e\u003cp\u003eSince LV-LP40 has no listed alternative codes, ordering comes down to matching one of the four Canon models it's built for rather than cross-checking part numbers. As a module lamp, the housing is replaced along with the bulb, so your old housing's condition isn't a factor.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08590\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich Canon projectors take the LV-LP40?\u003c\/strong\u003e\u003cbr\u003eFour are listed: the LV-WX300ST, LV-WX310ST, LV-WX320 and 0120C001. If your projector isn't one of these, check its own model plate rather than assuming this lamp fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't a wattage given for the LV-LP40?\u003c\/strong\u003e\u003cbr\u003eWe only state figures we hold on file, and a wattage rating isn't recorded for this lamp. Compatibility with the four listed Canon models is still confirmed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs LV-LP40 sold under any other code?\u003c\/strong\u003e\u003cbr\u003eNo, LV-LP40 is the only part number we have listed for this lamp. If you've seen a different code elsewhere, check it against your projector's own model plate before assuming it's the same part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with a module-style order like the LV-LP40?\u003c\/strong\u003e\u003cbr\u003eYou receive the lamp already fitted inside a new housing, ready to install as a single unit in place of the old module, rather than a bare bulb for reuse in your existing housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I handle the old lamp once it's removed?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully before removing the old module, and avoid touching the bulb directly. Dispose of the old unit according to your local rules for lamps of this type.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182599024876,"sku":"LA-08590","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/31272-xl.png?v=1786959309"},{"product_id":"lv-lp38-projector-lamp","title":"LV-LP38 bare projector lamp","description":"\u003cp\u003eThe Canon LV-X300ST, LV-X310ST and LV-X320 all take the LV-LP38, a bare lamp with no wattage or hours figure published for it. Fitting is straightforward since only three Canon models are listed, and LV-LP38 is the sole code on record for the part.\u003c\/p\u003e\u003cp\u003eThere's no alternative code to weigh up here, so confirm your projector is one of the three listed models — LV-X300ST, LV-X310ST or LV-X320 — before ordering. Being a bare lamp, it goes into the housing already fitted to your projector rather than arriving with one of its own.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08591\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the LV-LP38 fit the Canon LV-WX300ST too?\u003c\/strong\u003e\u003cbr\u003eNo. The WX300ST and related WX-prefixed models take a different lamp, LV-LP40. LV-LP38 is listed only for the LV-X300ST, LV-X310ST and LV-X320, so check your model name carefully before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't there a real photo for this lamp?\u003c\/strong\u003e\u003cbr\u003eWe don't hold a genuine product photograph for LV-LP38, so a generic image is used on this listing in its place. The compatibility details are still specific to this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LV-LP38 the only code for this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, LV-LP38 is the single part number we have on file, with no listed alternatives from other brands, so ordering is simply a matter of matching your projector model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between LV-X310ST and LV-WX310ST for lamp purposes?\u003c\/strong\u003e\u003cbr\u003eDespite the similar naming, they take different lamps — the LV-X310ST uses LV-LP38, while the LV-WX310ST uses LV-LP40. Check your model name carefully, including the W, before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check on my projector before ordering a bare lamp?\u003c\/strong\u003e\u003cbr\u003eConfirm the housing already inside your projector is free of cracks or melted plastic, since a bare lamp like LV-LP38 relies on that housing to hold the new bulb in place.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182599745772,"sku":"LA-08591","price":125.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lv-lp39-projector-lamp-module","title":"LV-LP39 projector lamp with module","description":"\u003cp\u003eListed against a single projector, the Canon LV-WX300, the LV-LP39 is a module-style lamp with its housing built in. No wattage or lamp-life figure is published for this part, and Canon has also issued it under the alternative code 0119C001.\u003c\/p\u003e\u003cp\u003eWith a single compatible projector, confirming fitment for the LV-LP39 is simple: check that your unit is a Canon LV-WX300, not one of the closely named WX300ST or WX310ST models, which take a different lamp. It's also listed as 0119C001, the same module under Canon's alternative numbering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08588\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the LV-LP39 fit the Canon LV-WX300ST as well?\u003c\/strong\u003e\u003cbr\u003eNo, the WX300ST is listed separately for the LV-LP40. LV-LP39 is listed only for the plain LV-WX300, so check your model name carefully before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 0119C001 refer to?\u003c\/strong\u003e\u003cbr\u003e0119C001 is an alternative code Canon has used for the same lamp we list as LV-LP39. Both point to the module built for the Canon LV-WX300.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is no wattage published for the LV-LP39?\u003c\/strong\u003e\u003cbr\u003eWe list only the specification figures on file for a given part, and a wattage rating isn't recorded for LV-LP39. Fitment is still confirmed against the Canon LV-WX300.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat form does the LV-LP39 arrive in?\u003c\/strong\u003e\u003cbr\u003eIt's listed as a Projector Lamp with Module, so it arrives with the bulb already fitted inside a new housing, ready to fit as a complete unit rather than a bulb alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is 'original' lamp stock, as opposed to a generic equivalent?\u003c\/strong\u003e\u003cbr\u003eAn original lamp is built to the specification of the part first fitted by the projector's maker. We list LV-LP39 under Canon's own code plus its known alternative, 0119C001, rather than a generic substitute number.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182600368364,"sku":"LA-08588","price":125.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/36940-xl.png?v=1786965702"},{"product_id":"610-315-5647-projector-lamp-module","title":"610-315-5647 projector lamp with module","description":"\u003cp\u003eTwo Canon models, the LV-X4 and LV-X4E, share the 610-315-5647 with two Sanyo models, the PLC-XU4000C and PLC-XU41. It's a module-style lamp, housing included, and Sanyo lists the same part under the code POA-LMP79. No wattage or hours figure is published for it.\u003c\/p\u003e\u003cp\u003eIf you've seen this lamp listed as POA-LMP79, that's Sanyo's own code for the same part as 610-315-5647. With four compatible projectors across two brands, confirm your exact model name before ordering, since Canon and Sanyo each use their own numbering for the same physical lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08593\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs POA-LMP79 the same as 610-315-5647?\u003c\/strong\u003e\u003cbr\u003eYes, POA-LMP79 is Sanyo's code for the same lamp we list primarily as 610-315-5647. It's the part fitted to both the Canon LV-X4\/X4E and the Sanyo PLC-XU4000C\/XU41.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo models take this lamp?\u003c\/strong\u003e\u003cbr\u003eTwo are listed: the PLC-XU4000C and the PLC-XU41. It's also listed for two Canon models, the LV-X4 and LV-X4E, four projectors in total for this lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't a wattage listed for the 610-315-5647?\u003c\/strong\u003e\u003cbr\u003eWe only publish specification figures we hold on file, and neither a wattage nor an hours rating is recorded for this lamp. Compatibility with the four listed projectors is still confirmed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between the Canon LV-X4 and LV-X4E?\u003c\/strong\u003e\u003cbr\u003eBoth take the same 610-315-5647 lamp, so for lamp-ordering purposes there's no difference between the two; check your model plate to confirm which one you have for your own records.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes a module lamp need the old housing to be in good shape?\u003c\/strong\u003e\u003cbr\u003eNo — a module like 610-315-5647 replaces the housing along with the bulb, so it doesn't depend on the condition of the housing already in your projector.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182600990956,"sku":"LA-08593","price":53.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/37897-xl.png?v=1786965838"},{"product_id":"lv-lp35-projector-lamp","title":"LV-LP35 bare projector lamp","description":"\u003cp\u003eSixteen Canon projectors, from the LV-7290 through to the LV-8277A, take the LV-LP35. At 215 watts, it carries a 4,000-hour rating, longer than many of the bare lamps we stock, and fits inside the housing your Canon projector already has. LV-LP35 is the only code we hold for this lamp.\u003c\/p\u003e\u003cp\u003eBecause this lamp spans sixteen Canon models across the LV-7000 and LV-8000 series, check your projector's exact suffix — an LV-7292A differs from an LV-7292M and LV-7292S — before ordering. As a bare lamp, only the bulb is replaced; your existing housing stays in use.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 215 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 4,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08570\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 16 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does the LV-LP35 have a longer rated life than other Canon lamps?\u003c\/strong\u003e\u003cbr\u003eAt 4,000 hours, the LV-LP35 is rated well beyond many of the lamps we stock, which is simply the figure specified for this particular part across its sixteen listed Canon projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between the LV-7292A, LV-7292M and LV-7292S?\u003c\/strong\u003e\u003cbr\u003eAll three are listed for the LV-LP35, so the lamp itself is the same; the suffix differences relate to the projector variant rather than to which lamp it takes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs LV-LP35 sold under a different code anywhere?\u003c\/strong\u003e\u003cbr\u003eNo, LV-LP35 is the only part number listed for this lamp. All sixteen compatible Canon projectors are ordered under this single code, from the LV-7290 through to the LV-8277A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is a generic image shown instead of a real photo?\u003c\/strong\u003e\u003cbr\u003eWe don't hold a genuine product photograph for the LV-LP35, so a placeholder image represents it here. The listed specification and compatibility remain specific to this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wattage rating of the LV-LP35?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 215 watts with a 4,000-hour service life, and this applies across every one of the sixteen listed Canon projectors, from the LV-7290 to the LV-8277A.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182601973996,"sku":"LA-08570","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"610-314-9127-projector-lamp","title":"610-314-9127 bare projector lamp","description":"\u003cp\u003e610-314-9127 is the bare-bulb counterpart to LV-LP22, fitting the housing already inside your projector rather than arriving with one of its own. Rated at 300 watts for 1,500 hours, it covers 22 projectors, including the Sanyo PLV-80 and PLV-80L alongside the High End Systems DL.2.\u003c\/p\u003e\u003cp\u003eThis part carries an unusually wide set of alternative codes — 003-120239-01, 03-000882-01P, LV-LP22, POA-LMP81, POA-LMP98 and 610-325-2957 among them — so match your exact projector model rather than relying on any single code you've seen elsewhere. As a bare lamp, check your existing housing is undamaged before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 300 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08651\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 22 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between 610-314-9127 and LV-LP22?\u003c\/strong\u003e\u003cbr\u003eThey're the same lamp; 610-314-9127 is the bare-bulb version, fitting into your existing housing, while LV-LP22 is the equivalent lamp supplied as a complete module with a new housing built in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the 610-314-9127 sold under codes from five different brands?\u003c\/strong\u003e\u003cbr\u003eFive brands — Canon, Christie, Eiki, High End Systems and Sanyo — have each sold projectors built around this lamp and issued their own part number for it, giving codes including 003-120239-01, POA-LMP81, POA-LMP98 and LV-LP22 alongside 610-314-9127.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sanyo PLV-80 take the same lamp as the PLC-XP51?\u003c\/strong\u003e\u003cbr\u003eYes, both the Sanyo PLV-80 and PLV-80L are listed alongside the PLC-XP51, PLC-XP56 and related variants, all taking the 610-314-9127 at 300 watts and 1,500 hours rated life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is a placeholder image shown for this lamp?\u003c\/strong\u003e\u003cbr\u003eWe don't hold a genuine product photograph for 610-314-9127, so a generic image stands in for it on this listing, while the specification and compatibility details remain specific to the part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the rated life of the 610-314-9127?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 1,500 hours running at 300 watts, a figure that applies across all 22 listed projectors from Canon, Christie, Eiki, High End Systems and Sanyo.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182602825964,"sku":"LA-08651","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"rs-lp04-projector-lamp","title":"RS-LP04 bare projector lamp","description":"\u003cp\u003eCanon's REALiS and XEED ranges overlap heavily around the RS-LP04, listed under twelve names including REALiS SX7, XEED SX7, SX700, WUX10 and WUX10MarkII. Rated at 275 watts for 2,000 hours, it's a bare lamp fitting into your projector's existing housing. Canon also lists the same part as 2396B001\/AA and 2396B001\/BB.\u003c\/p\u003e\u003cp\u003eBecause Canon has marketed these projectors under both the REALiS and XEED names, the same physical unit may appear on your projector's badge as, for example, XEED SX7 or simply SX7 — both point to the same RS-LP04. Check the model printed on your unit rather than assuming from marketing name alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 12 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the Canon XEED SX7 the same as the REALiS SX7?\u003c\/strong\u003e\u003cbr\u003eFor lamp purposes, yes — both names are listed against the RS-LP04, along with plain 'SX7' and 'SX700' naming. Canon has used REALiS and XEED as marketing names for overlapping model ranges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between 2396B001\/AA and 2396B001\/BB?\u003c\/strong\u003e\u003cbr\u003eBoth are alternative codes for the same lamp we list as RS-LP04. The \/AA and \/BB suffixes are Canon's own variant marking rather than a difference in the lamp itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the RS-LP04 fit the WUX10 Mark II?\u003c\/strong\u003e\u003cbr\u003eYes, the WUX10MarkII is listed alongside the plain WUX10 and the XEED WUX10 naming, all taking the RS-LP04, one of twelve model names listed for this lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is a generic image used for this listing?\u003c\/strong\u003e\u003cbr\u003eWe don't hold a genuine photograph of the RS-LP04, so a placeholder image is shown instead. The compatibility and specification details remain specific to this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the rated wattage of the RS-LP04?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 275 watts with a 2,000-hour service life, applying across all twelve listed Canon REALiS and XEED model names, including the WUX10 and SX700.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182603776236,"sku":"LA-08600","price":392.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"2678b001-aa-projector-lamp-module","title":"2678B001\/AA projector lamp with module","description":"\u003cp\u003eThe Canon REALiS SX80, its Mark II and Mark II D versions, and the SX800, along with their XEED-branded equivalents, all take the 2678B001\/AA. Supplied as a complete module rather than a bare bulb, it runs at 230 watts for 2,000 hours. Canon also lists this same part as RS-LP05.\u003c\/p\u003e\u003cp\u003eYou may see this lamp listed as RS-LP05 elsewhere — that's the same part as 2678B001\/AA, just under a shorter alternative code. Since it arrives as a full module, fitting means swapping the whole housing and bulb assembly rather than reusing the one already in your projector.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 230 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08603\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 6 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between the REALiS SX80 and SX80 Mark II?\u003c\/strong\u003e\u003cbr\u003eBoth are listed for the 2678B001\/AA, so they take the same lamp; the Mark II and Mark II D naming refers to the projector revision rather than a change in lamp requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs RS-LP05 the same lamp as 2678B001\/AA?\u003c\/strong\u003e\u003cbr\u003eYes, RS-LP05 is the alternative code recorded for the same lamp we list as 2678B001\/AA. Both fit the same six Canon REALiS and XEED SX80 models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the XEED SX800 use the same lamp as the XEED SX80?\u003c\/strong\u003e\u003cbr\u003eYes, both the XEED SX80 and XEED SX800 are listed for the 2678B001\/AA, alongside their REALiS-branded equivalents, six projectors in total sharing this one module lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included in a module-style order for this lamp?\u003c\/strong\u003e\u003cbr\u003eYou receive the bulb already fitted inside its own housing, ready to install as a single assembly, rather than a bare bulb that relies on your existing housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated life of the 2678B001\/AA?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 2,000 hours running at 230 watts, a figure that applies across all six listed Canon REALiS and XEED SX80 models, matching the bare RS-LP05 version.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182604431596,"sku":"LA-08603","price":391.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20521-xl.png?v=1786955724"},{"product_id":"rs-lp05-projector-lamp","title":"RS-LP05 bare projector lamp","description":"\u003cp\u003eRS-LP05 is the bare-lamp counterpart to 2678B001\/AA, fitting the same six Canon projectors: the REALiS SX80, SX80 Mark II, SX80 Mark II D, SX800, and their XEED SX80 and XEED SX800 equivalents. It shares the 230-watt, 2,000-hour rating of the module version but fits into your existing housing rather than replacing it.\u003c\/p\u003e\u003cp\u003eChoosing between RS-LP05 and 2678B001\/AA comes down to whether you want a bare bulb for your current housing or a complete module — the lamp specification and projector fitment are otherwise identical. Check that your existing housing is free of damage before ordering the bare RS-LP05.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 230 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08602\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 6 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eShould I order RS-LP05 or 2678B001\/AA?\u003c\/strong\u003e\u003cbr\u003eThat depends on whether your existing housing is in good condition. RS-LP05 is the bare bulb for reuse in your current housing, while 2678B001\/AA is the same lamp supplied as a complete module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes RS-LP05 fit the REALiS SX80 Mark II D specifically?\u003c\/strong\u003e\u003cbr\u003eYes, the REALiS SX80 Mark II D is listed alongside the standard SX80, Mark II, SX800 and both XEED-branded equivalents, all taking the RS-LP05 at 230 watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is a placeholder photo used for the RS-LP05 listing?\u003c\/strong\u003e\u003cbr\u003eWe don't hold a genuine photograph of this specific lamp, so a generic image is shown in its place. The listed specification and compatible projectors remain specific to RS-LP05.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 2678B001\/AA the only alternative code for RS-LP05?\u003c\/strong\u003e\u003cbr\u003eYes, 2678B001\/AA is the only other code recorded for this lamp, referring to the module version of the same part, which fits the same six Canon projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage and life is the RS-LP05 rated for?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 230 watts with a 2,000-hour service life, matching the module version of this lamp and applying across all six listed Canon projectors.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182605185260,"sku":"LA-08602","price":299.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lv-lp14-projector-lamp-module","title":"LV-LP14 projector lamp with module","description":"\u003cp\u003eThe Canon LV-S2 shares the LV-LP14 with two Eiki models, the LC-SM4 and LC-SM4D, and two Sanyo models, the PLC-SW20A and PLC-SW20AR. It's a module-style lamp at 150 watts and 2,000 hours, and Sanyo lists the same part as POA-LMP37 or 610-295-5712.\u003c\/p\u003e\u003cp\u003eYou may notice 610-295-5712 listed with or without hyphens in places — both refer to the same code as POA-LMP37 and LV-LP14. With five compatible projectors across three brands, confirm your exact model before ordering, since the LC-SM4 and LC-SM4D differ only by a single letter.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08586\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between the Eiki LC-SM4 and LC-SM4D?\u003c\/strong\u003e\u003cbr\u003eBoth are listed for the LV-LP14, so they share the same lamp; the D suffix refers to a projector variant rather than a change in lamp requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs POA-LMP37 the Sanyo code for this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, POA-LMP37 is Sanyo's code for the same lamp we list as LV-LP14, also recorded as 610-295-5712, and sometimes written with spaces instead of hyphens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo models take the LV-LP14?\u003c\/strong\u003e\u003cbr\u003eTwo are listed: the PLC-SW20A and the PLC-SW20AR. It's also listed for the Canon LV-S2 and two Eiki models, five projectors in total sharing this lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat arrives when I order the LV-LP14?\u003c\/strong\u003e\u003cbr\u003eIt's listed as a Projector Lamp with Module, so you receive the bulb already fitted inside a new housing, ready to fit as a single unit rather than a bare bulb alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the rated wattage of the LV-LP14?\u003c\/strong\u003e\u003cbr\u003eIt's rated at 150 watts with a 2,000-hour service life, applying across the Canon LV-S2 and the four Eiki and Sanyo models listed alongside it.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182606004460,"sku":"LA-08586","price":54.63,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23697-xl.png?v=1786957090"},{"product_id":"rs-lp01-projector-lamp-module","title":"RS-LP01 Projector Lamp with Module","description":"\u003cp\u003eRS-LP01 is a complete lamp and housing module built for two Canon models, the REALiS SX50 and the XEED SX50. Canon also lists this same lamp under the code 0028B001BA. Because the module includes both the bulb and its housing, it drops straight into the projector without any separate bracket to transfer.\u003c\/p\u003e\u003cp\u003eWe list this lamp under both of its known codes, RS-LP01 and 0028B001BA, so it is easy to match against whatever your projector's service menu displays. As a module, it replaces the whole assembly rather than a bare bulb, which suits anyone who would rather not open the old housing themselves. Confirm your exact model before ordering, since REALiS and XEED are shared naming across several Canon ranges.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-10926\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the RS-LP01 the same lamp as 0028B001BA?\u003c\/strong\u003e\u003cbr\u003eYes. RS-LP01 and 0028B001BA refer to the same lamp module; we show both because Canon's documentation uses different codes depending on region and dealer channel. Ordering by either code gets you the identical part, so there is no need to track down a further reference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the REALiS SX50 use the same lamp as the XEED SX50?\u003c\/strong\u003e\u003cbr\u003eYes, both models take the RS-LP01 module. REALiS and XEED are Canon's naming for the same projector platform in different markets, so the lamp and housing assembly is identical across the two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm my Canon is genuinely an SX50 before buying the RS-LP01?\u003c\/strong\u003e\u003cbr\u003eConfirm your projector reads REALiS SX50 or XEED SX50 on its rating label or on-screen menu, since Canon reuses similar model numbers across other ranges. If your unit shows a different suffix, the lamp housing may not be a match, so it is worth checking before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I handle the lamp once it's out of the box?\u003c\/strong\u003e\u003cbr\u003eProjector lamps run at high pressure and heat during use, so handle the module by its housing rather than the glass, and let a used lamp cool fully before removing it. Keep the replacement in its packaging until you are ready to fit it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWithout a quoted lamp life, what tells me the RS-LP01 is spent?\u003c\/strong\u003e\u003cbr\u003eThis listing does not carry a published lamp life figure, so rely on the usual signs: a dimmer picture, colour that looks washed out, or a warning from the projector's own on-screen menu. Any of those is a reasonable prompt to fit a replacement module.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182606561516,"sku":"LA-10926","price":987.76,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/36909-xl.png?v=1786965701"},{"product_id":"lv-lp41-projector-lamp-module","title":"LV-LP41 Projector Lamp with Module","description":"\u003cp\u003eThe LV-LP41 module pairs a replacement bulb with its own housing, made for Canon's LV-WX300UST and LV-WX300USTi ultra-short-throw projectors. These two models share the same optical engine, which is why one lamp assembly covers both. Fitting the complete module means there is no separate bulb-only step, and no old housing to reuse.\u003c\/p\u003e\u003cp\u003eLV-LP41 is not listed under any further alternative code in our records, so if you see a different reference elsewhere it is worth double-checking against your projector's own service label before buying. Because this is a module rather than a bare lamp, it includes the mounting frame and connector, which keeps the swap to removing one unit and fitting another in its place.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11232\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between LV-WX300UST and LV-WX300USTi?\u003c\/strong\u003e\u003cbr\u003eBoth are Canon ultra-short-throw projectors that use the same LV-LP41 lamp module. The 'i' suffix denotes a later variant in the range, but the optical and lamp housing design is shared, so the same replacement part fits either model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the projector need any setup after fitting the new module?\u003c\/strong\u003e\u003cbr\u003eMany Canon projectors track lamp hours and may prompt a reset from the on-screen menu once a new module is fitted; check your model's menu system if this applies, since steps vary by firmware version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does swapping this module involve?\u003c\/strong\u003e\u003cbr\u003eThe LV-LP41 is a self-contained unit that lifts out and fits back in as one piece, typically after opening a lamp door and releasing a latch or a couple of screws. There is no separate bulb to seat inside an old housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich brand issues the LV-LP41 code?\u003c\/strong\u003e\u003cbr\u003eLV-LP41 is Canon's own reference for this lamp module, used consistently across both the LV-WX300UST and LV-WX300USTi listings. Quoting it when you order is the most direct way to confirm the match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is 'original' used on this listing?\u003c\/strong\u003e\u003cbr\u003eWhere we describe a lamp as original, it means the bulb and housing are built to the projector manufacturer's specification rather than being a generic aftermarket substitute, not that it ships in retail packaging from a particular source.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182607315180,"sku":"LA-11232","price":135.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23225-xl.png?v=1786957025"},{"product_id":"lx-lp01-projector-lamp-module","title":"LX-LP01 Projector Lamp with Module","description":"\u003cp\u003eCanon's LX-MU700 projector, also referenced under the code 0953C001, takes the LX-LP01 lamp module. The part combines the bulb and its housing into one unit, so fitting it is a matter of exchanging the whole assembly rather than handling a bare bulb separately. No other Canon model shares this specific lamp.\u003c\/p\u003e\u003cp\u003eWe list this lamp under both LX-LP01 and 0953C001 since Canon references the projector and the lamp interchangeably depending on the document you're reading. If your projector's rating label shows either code, this module is the correct match. As a full module, it replaces the housing as well as the bulb inside it.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11760\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does this listing show two different codes?\u003c\/strong\u003e\u003cbr\u003eLX-LP01 and 0953C001 both point to the same lamp and housing assembly for the Canon LX-MU700. We show both so the listing matches whichever reference appears on your projector's documentation or rating label.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes inside the LX-LP01 box?\u003c\/strong\u003e\u003cbr\u003eThe LX-LP01 module includes the bulb pre-fitted into its housing frame, ready to exchange for the old assembly as one piece. There is no separate lamp to seat by hand inside a reused housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any special preparation needed before fitting this module?\u003c\/strong\u003e\u003cbr\u003eBeyond letting the projector cool and disconnecting it from power, no special preparation is needed. The module is designed to drop into the same bay as the original, so no extra bracket or adapter is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I avoid when handling the new lamp?\u003c\/strong\u003e\u003cbr\u003eAvoid touching the glass envelope directly with bare fingers, since oils can shorten the life of the bulb once it heats up. Handle the module by its housing edges, and keep it in its box until you're ready to fit it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I be sure the LX-LP01 is right for my projector?\u003c\/strong\u003e\u003cbr\u003eCheck that your projector's model plate reads LX-MU700 or shows the code 0953C001. Since this lamp is not shared with any other Canon range in our records, matching either reference confirms it is the correct part.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182608036076,"sku":"LA-11760","price":281.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/31115-xl.png?v=1786959301"},{"product_id":"rs-lp09-projector-lamp-module","title":"RS-LP09 Projector Lamp with Module","description":"\u003cp\u003eBuilt for two Canon REALiS models, RS-LP09 serves the WUX6000 and Xeed WUX6010 projectors as a complete lamp and housing unit. Canon's documentation lists several near-identical strings for each model, including REALiSWUX6000, REALiSWUX6000-D, REALiSWUX6010 and REALiSWUX6010D, but they all resolve to this same module.\u003c\/p\u003e\u003cp\u003eWith so many near-duplicate reference strings attached to this lamp, the simplest way to confirm a match is the projector name itself: REALiS WUX6000 or Xeed WUX6010. RS-LP09 is the code we use as the primary listing, with the longer strings kept on file in case your projector's menu displays one of those instead. This is supplied as a full module, not a bare bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11349\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy are there so many alternative codes listed for RS-LP09?\u003c\/strong\u003e\u003cbr\u003eCanon's internal documentation uses slightly different strings for the REALiS and Xeed branding of the same projector platform, and for standard versus 'D' suffix variants. All of them point to the identical RS-LP09 lamp module, so any one of them confirms a match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between REALiS WUX6000 and Xeed WUX6010?\u003c\/strong\u003e\u003cbr\u003eREALiS and Xeed are Canon's naming conventions for the same projector line in different markets. The WUX6000 and WUX6010 share the RS-LP09 lamp module, so the naming difference does not affect which lamp you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RS-LP09 exchanged as one sealed Canon assembly?\u003c\/strong\u003e\u003cbr\u003eYes. RS-LP09 is supplied as a complete module with the bulb already fitted inside its housing, so the whole assembly is exchanged as one unit rather than separating a bulb from an existing frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the projector need a lamp counter reset after I fit this?\u003c\/strong\u003e\u003cbr\u003eMany Canon projectors in this range track lamp hours through an on-screen menu, and some prompt a reset once a new module is detected. Check your specific model's menu, since the exact steps differ across firmware versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGiven the many RS-LP09 code variants, what is the safest pre-order check?\u003c\/strong\u003e\u003cbr\u003eLook at your projector's model plate for either WUX6000 or WUX6010, under the REALiS or Xeed name. Since several string variants exist for this same part, the projector name is a more reliable check than trying to match a long code exactly.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182608822508,"sku":"LA-11349","price":281.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/33715-xl.png?v=1786962483"},{"product_id":"lv-lp31-projector-lamp-module","title":"LV-LP31 Projector Lamp with Module","description":"\u003cp\u003eEight Canon LV projectors share the LV-LP31 lamp: the LV-7275, LV-7370, LV-7375, LV-7385, LV-8215, LV-8300 and LV-8310, alongside the model listed as 3522B003AA. It runs at 230W and is rated for 4,000 hours of use. Canon also references the same part as 3522B002, and the module is supplied complete with its housing.\u003c\/p\u003e\u003cp\u003eBecause one lamp code covers such a wide spread of Canon models, check your projector's exact model number against the list above before ordering; LV-7275 and LV-7375 in particular are easy to mix up at a glance. LV-LP31 and 3522B002 both refer to this same module, so either code confirms the right part. It fits as a full assembly, not a bare bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 230 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 4,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08568\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 8 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many projectors use the LV-LP31 lamp?\u003c\/strong\u003e\u003cbr\u003eEight Canon LV models share this module: the LV-7275, LV-7370, LV-7375, LV-7385, LV-8215, LV-8300, LV-8310 and the unit listed as 3522B003AA. All of them take the identical 230W lamp and housing assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat replacement interval does the LV-LP31 support?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 4,000 hours at 230W. Actual lamp life varies with how the projector is used, including how often it is switched on and off and the environment it runs in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 3522B002 a different lamp to LV-LP31?\u003c\/strong\u003e\u003cbr\u003eNo, 3522B002 and LV-LP31 refer to the same module. We list both codes because Canon's own documentation uses either reference depending on the projector model and the version of the service manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I avoid ordering the wrong LV-series lamp?\u003c\/strong\u003e\u003cbr\u003eSeveral Canon LV models look similar in name, so match your projector's exact model number, for example LV-7375 rather than LV-7370, against the rating label before ordering, since small differences in the model number can mean a different lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes fitting this module reset the lamp hour counter?\u003c\/strong\u003e\u003cbr\u003eSome Canon projectors in this range prompt a lamp-hour reset from their on-screen menu once a new module is detected, though the exact menu path depends on the model. It is worth checking your specific projector's manual for the steps.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182609576172,"sku":"LA-08568","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27136-xl.png?v=1786958892"},{"product_id":"lv-lp29-projector-lamp-module","title":"LV-LP29 Projector Lamp with Module","description":"\u003cp\u003eFour brands rely on the same lamp behind different badges: Canon's LMP108 and LV-7585, Christie's LMP108, LS650 and LX650, Eiki's LC-X80, LC-X80D and LMP108, and Sanyo's LMP108 alongside its PLC-XP100 family. All thirteen projectors take the LV-LP29 module, which runs at 330W and carries a 2,000-hour rating.\u003c\/p\u003e\u003cp\u003eWith so many brand names attached to one lamp, Sanyo's own reference is POA-LMP108, while Christie and Eiki both use LMP108 directly, and our other listed codes are 003-120333-01 and 610-334-2788. All of them describe the same LV-LP29 module. Confirm your projector's exact model against the list above, since the LMP108 label alone is shared by four different manufacturers.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08581\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 13 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do Canon, Christie, Eiki and Sanyo all use the same lamp?\u003c\/strong\u003e\u003cbr\u003eThese brands built projectors on shared engine designs during this generation, so several ranges standardised on the same lamp and housing rather than each commissioning a unique part. LV-LP29 is the module common to all thirteen listed projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is POA-LMP108?\u003c\/strong\u003e\u003cbr\u003ePOA-LMP108 is Sanyo's own reference for this lamp. It is the same module as LV-LP29, 003-120333-01 and 610-334-2788, all of which describe one 330W, 2,000-hour lamp and housing assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector just shows LMP108, is that enough to order?\u003c\/strong\u003e\u003cbr\u003eLMP108 is used by Canon, Christie and Eiki alike, so check the brand name on your projector as well as the code, since the housing shape can differ slightly between ranges even when the lamp itself is shared.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing include the housing or just the bulb?\u003c\/strong\u003e\u003cbr\u003eThis is a full module, supplied with the bulb fitted inside its housing frame, so you exchange the whole unit rather than opening the old housing to fit a bare bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LV-LP29 rated for a specific number of hours?\u003c\/strong\u003e\u003cbr\u003eYes, LV-LP29 carries a manufacturer rating of 2,000 hours at 330W, though real-world life depends on usage patterns such as run time per session and the projector's operating environment.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182610297068,"sku":"LA-08581","price":157.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/31186-xl.png?v=1786959307"},{"product_id":"lv-lp32-projector-lamp-module","title":"LV-LP32 Projector Lamp with Module","description":"\u003cp\u003eLV-LP32 supplies lamp and housing for five Canon projectors: the LV-7280, LV-7280E, LV-7285 and LV-7380, plus the unit listed as 4330B001AA. Running at 180W with a 4,000-hour rating, it is one of the longer-lived lamps in Canon's LV range, and Canon's own part reference for it is 4330B001.\u003c\/p\u003e\u003cp\u003e4330B001 and LV-LP32 both describe this same module, so either code confirms a match if you're checking against your projector's service documentation. Because the LV-7280 and LV-7280E share a model number but differ by suffix, and the LV-7285 is a separate model again, checking the full model string on your rating label is worth doing before you order. This is a full module, not a bare bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 180 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 4,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08569\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between LV-7280 and LV-7280E?\u003c\/strong\u003e\u003cbr\u003eThe 'E' suffix denotes a variant within Canon's LV-7280 line, but both use the same LV-LP32 lamp module, so the difference does not change which lamp you need to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 4330B001 the same as LV-LP32?\u003c\/strong\u003e\u003cbr\u003eYes, 4330B001 is Canon's own reference for this lamp, and it is identical to the module listed here as LV-LP32. Either code will match the same 180W, 4,000-hour part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hours can the LV-LP32 run before it wears out?\u003c\/strong\u003e\u003cbr\u003eLV-LP32 carries a 4,000-hour rating at 180W, one of the longer ratings across Canon's LV range, though actual life depends on how the projector is used day to day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the module include beyond the bulb?\u003c\/strong\u003e\u003cbr\u003eThe module includes the housing frame and connector alongside the bulb itself, so the complete assembly is exchanged as one unit rather than fitting a bare lamp into the existing housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I confirm LV-LP32 is right for my projector?\u003c\/strong\u003e\u003cbr\u003eMatch the full model string on your projector's rating label, LV-7280, LV-7280E, LV-7285 or LV-7380, against the list on this page. All four take the identical LV-LP32 module.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182610919660,"sku":"LA-08569","price":130.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26256-xl.png?v=1786958698"},{"product_id":"lv-lp28-projector-lamp-module","title":"LV-LP28 Projector Lamp with Module","description":"\u003cp\u003eTwenty projectors across four brands draw on the LV-LP28 lamp: Canon's LMP101, LV-7575 and 1706B001AA; Christie's LX55 and Vivid LX55; Eiki's LC-71DL, LC-X71, LC-X71D, LC-X71L and LMP101; and a long Sanyo line running from the ET-SLMP101 and KSP-5500 through to the PLC-XP5700 family. The lamp is rated 318W and 1,500 hours.\u003c\/p\u003e\u003cp\u003eSanyo's own reference for this lamp is POA-LMP101, while our other listed codes are 003-120188-01 and 610-328-7362, all four describing the identical LV-LP28 module. Given how many Sanyo model names share this lamp, from the ML-5500 to the PLC-XP57 variants, checking your projector's exact model against the full list is the safest way to confirm before ordering. It is supplied as a complete module.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 318 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08579\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 20 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp code cover so many different projectors?\u003c\/strong\u003e\u003cbr\u003eCanon, Christie, Eiki and Sanyo each built models on a shared projector engine during this generation, and rather than commission separate lamps, several ranges used the identical LV-LP28 assembly under their own model names.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is POA-LMP101?\u003c\/strong\u003e\u003cbr\u003ePOA-LMP101 is Sanyo's own part reference for this lamp. It is the same module listed here as LV-LP28, 003-120188-01 and 610-328-7362, all describing one 318W, 1,500-hour assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThere are a lot of Sanyo models listed, how do I pick the right one?\u003c\/strong\u003e\u003cbr\u003eMatch your projector's full model string, such as PLC-XP5700 or PLC-XP57L, against the list on this page rather than relying on the LMP101 code alone, since that reference is shared across all four brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Eiki LC-71DL use the same lamp as the LC-X71?\u003c\/strong\u003e\u003cbr\u003eYes, both take the LV-LP28 module along with the LC-X71D and LC-X71L variants. The suffix letters denote different features on the projector body but do not change which lamp fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I do with the old lamp once it's removed?\u003c\/strong\u003e\u003cbr\u003eLet it cool fully before handling, then dispose of it according to your local electronics or bulb recycling guidance, since projector lamps contain pressurised gas and should not go in general waste.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182611673324,"sku":"LA-08579","price":160.37,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20501-xl.png?v=1786955682"},{"product_id":"1035c001-projector-lamp-module","title":"1035C001 Projector Lamp with Module","description":"\u003cp\u003e1035C001 is the lamp Canon fits to the LX-MU500 and LX-MW500 projectors, and the same part also appears in Canon's documentation under the reference LX-LP02. There are no other alternative codes recorded for this lamp in our system, so 1035C001 is the code to quote when ordering. It is supplied as a complete module, bulb and housing together.\u003c\/p\u003e\u003cp\u003eBecause Canon uses more than one reference for this lamp across its documentation, quoting either 1035C001 or LX-LP02 alongside your projector model, LX-MU500 or LX-MW500, is the most reliable way to confirm you're ordering the correct part. As a full module, it swaps in as one assembly, with no separate housing to retain from the old lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12146\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is LX-LP02?\u003c\/strong\u003e\u003cbr\u003eLX-LP02 is another reference Canon uses for this same lamp, alongside 1035C001. Both point to the identical module built for the LX-MU500 and LX-MW500 projectors, so either code will match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LX-MU500 take the same lamp as the LX-MW500?\u003c\/strong\u003e\u003cbr\u003eYes, both projectors share the 1035C001 module. The 'U' and 'W' in the model names refer to different chassis features, but the lamp and housing assembly fitted to each is the same.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check on my projector before ordering?\u003c\/strong\u003e\u003cbr\u003eConfirm the model plate reads LX-MU500 or LX-MW500. If it shows a different LX model number, this listing may not be the correct lamp, since Canon's LX range covers several distinct lamp types.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes fitting a new module need a lamp-hour reset?\u003c\/strong\u003e\u003cbr\u003eSome Canon LX projectors track lamp hours and prompt a reset from the setup menu once a new module is fitted. Check your specific model's on-screen menu, as the steps can vary between firmware versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a full module or a separate bulb and housing?\u003c\/strong\u003e\u003cbr\u003eIt is a full module, with the bulb already seated in its housing and connector. You exchange the complete unit rather than fitting a bare lamp into a housing you already own.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182612492524,"sku":"LA-12146","price":398.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34329-xl.png?v=1786962720"},{"product_id":"5811120589-svv-projector-lamp-module","title":"5811120589-SVV Projector Lamp with Module","description":"\u003cp\u003eVivitek and Canon both call on the 5811120589-SVV module across a wide spread of models. On the Vivitek side that includes the DH833, DH856, DH858N, DH858ZN, DU857, DW832, DW855, DW932, DX831, DX83AAB, DX931 and SS-5811126482-VV, plus the 5811120589-S reference. Canon lists the same lamp for its LV-HD420 and LV-X420 projectors. Sixteen models in total share this one part.\u003c\/p\u003e\u003cp\u003eWith sixteen projectors listed against a single lamp, it is worth matching your exact model name rather than the brand alone; Vivitek's DX831 and DX931 look similar at a glance but are separate models, for instance. 5811120589-SVV and 5811120589-S both describe this module, so either reference confirms a match. It is supplied complete, with housing and bulb as one assembly.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 16 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow can one lamp fit both Canon and Vivitek projectors?\u003c\/strong\u003e\u003cbr\u003eVivitek supplies some of its projector engines to other brands under licence, which is why Canon's LV-HD420 and LV-X420 share a lamp housing with several Vivitek DLP models. The part itself, 5811120589-SVV, is identical across both brand names.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 5811120589-S different from 5811120589-SVV?\u003c\/strong\u003e\u003cbr\u003eNo, 5811120589-S is the same lamp module listed here as 5811120589-SVV. We show both because Vivitek's own documentation and third-party listings sometimes drop the trailing letters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy Vivitek model isn't listed exactly, how do I check?\u003c\/strong\u003e\u003cbr\u003eMatch your projector's full model code against the list on this page, including the DX831, DX83AAB and DX931 variants, since similar-looking model names can sit in different lamp families even within Vivitek's own range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'original' mean for a shared lamp like this?\u003c\/strong\u003e\u003cbr\u003eIt means the lamp and housing are built to the specification used across this projector platform, whichever brand's name appears on the projector itself, rather than a generic substitute made to fit loosely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the whole housing replaced, or just the bulb?\u003c\/strong\u003e\u003cbr\u003eThe whole housing is replaced. 5811120589-SVV is a complete module with the bulb pre-fitted, so the old assembly comes out and the new one goes in as a single unit.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182613147884,"sku":"LA-11400","price":192.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/21665-xl.png?v=1786956972"},{"product_id":"rs-lp11-projector-lamp-module","title":"RS-LP11 Projector Lamp with Module","description":"\u003cp\u003eREAliS WUX6500 and its siblings take the RS-LP11 lamp module: the standard WUX6500, the WU6500D and the WUX6500D. Canon's parts documentation also lists this lamp under the code 2141C001, alongside the longer reference strings REALiSWU6500D, REALiSWUX6500 and REALiSWUX6500D. All of them describe the identical module, supplied complete with housing.\u003c\/p\u003e\u003cp\u003eThe 'D' suffix on the WU6500D and WUX6500D denotes a variant within the same range, but all three projectors take this one lamp, so the suffix does not change which part to order. 2141C001 is Canon's shorter reference for RS-LP11, useful if that is what appears on your service documentation. This is a full module rather than a bare bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12956\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the 'D' mean in WUX6500D?\u003c\/strong\u003e\u003cbr\u003eThe 'D' denotes a variant within Canon's WUX6500 range, but it uses the same RS-LP11 lamp module as the standard WUX6500 and the WU6500D, so the suffix does not affect which lamp to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 2141C001 the same lamp as RS-LP11?\u003c\/strong\u003e\u003cbr\u003eYes, 2141C001 is Canon's own part reference for this module, identical to the one listed here as RS-LP11. Either code will match the same lamp and housing assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich REALiS model names verify the RS-LP11 is the right Canon part?\u003c\/strong\u003e\u003cbr\u003eConfirm your projector's model plate reads WU6500D, WUX6500 or WUX6500D under the REALiS name. All three share this lamp, so any of those three model names confirms RS-LP11 is the correct part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I store the replacement lamp before fitting it?\u003c\/strong\u003e\u003cbr\u003eKeep it in its original packaging, in a dry place away from direct impact, until you're ready to fit it. Avoid touching the glass with bare hands, as skin oils can shorten bulb life once it heats up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing include a lamp life rating?\u003c\/strong\u003e\u003cbr\u003eNo lamp life figure is published for this listing, so watch for the usual indicators instead, a dimmer image, colour that looks washed out, or a warning on the projector's own menu.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182613704940,"sku":"LA-12956","price":345.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/37972-xl.png?v=1786965854"},{"product_id":"22040012-projector-lamp-module","title":"22040012 Projector Lamp with Module","description":"\u003cp\u003eC-L33X through C-L50X, plus a run of Eiki EK models, all draw on the 22040012 lamp module. On the Canon side that covers the C-L33X, C-L40X, C-L43X and C-L50X. Eiki's compatible models are the EK-120U, EK-120UK, EK-121W, EK-121WK, EK-122EX and EK-122X. Ten projectors across two brands share this single part.\u003c\/p\u003e\u003cp\u003eNo alternative code is recorded for this lamp beyond 22040012 itself, so that is the reference to quote regardless of whether your projector carries the Canon or Eiki badge. Given how many similar model numbers sit in both ranges, C-L40X and C-L43X, or EK-121W and EK-122X, checking the exact model on your projector's label is worth the extra minute before ordering. This is a complete module.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12970\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do Canon and Eiki projectors share this lamp?\u003c\/strong\u003e\u003cbr\u003eCanon's C-L range and Eiki's EK series were built on a common projector platform during this generation, and both settled on the identical 22040012 lamp and housing rather than each using a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I tell the Eiki EK-121W and EK-122X apart?\u003c\/strong\u003e\u003cbr\u003eCheck the full model code printed on the projector's rating label or rear panel; the two are separate models within Eiki's EK line, though both happen to share the same 22040012 lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a different reference number for Canon's C-L range?\u003c\/strong\u003e\u003cbr\u003eNo additional code is recorded for this lamp in our listings beyond 22040012, and that single reference applies across both the Canon C-L and Eiki EK projectors listed here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the projector need a reset after I fit this lamp?\u003c\/strong\u003e\u003cbr\u003eSome models in this range track lamp hours through an on-screen menu and may prompt a reset once a new module is detected. The exact menu path depends on your specific projector, so check its manual if unsure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included with the 22040012 module?\u003c\/strong\u003e\u003cbr\u003eThe module includes the bulb fitted inside its housing frame and connector, ready to exchange for the old assembly as a single unit rather than handling a loose bulb.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182614425836,"sku":"LA-12970","price":135.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/38002-xl.png?v=1786965852"},{"product_id":"4824b001-projector-lamp","title":"4824B001 Bare Projector Lamp","description":"\u003cp\u003eLV-7590 takes a single bare bulb here: 4824B001, also referenced as LV-LP33. Running at 330W with a 2,000-hour rating, this is the lamp only, without a housing, so it is intended for fitting inside a housing you already own rather than replacing the whole assembly. Canon lists this as the sole projector for this part.\u003c\/p\u003e\u003cp\u003eBecause this is a bare bulb rather than a module, the existing housing from your LV-7590 is reused, with just the lamp itself swapped out. LV-LP33 and 4824B001 both refer to the identical bulb, so either code will match. If you would prefer to replace the housing along with the bulb, a full module version of this same lamp is also listed separately.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08582\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between this and the module version?\u003c\/strong\u003e\u003cbr\u003eThis listing, 4824B001, is the bare bulb only, meant to fit inside your existing LV-7590 housing. A separate listing covers the same lamp as a complete module with a new housing included, for anyone who would rather replace both together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs LV-LP33 the same lamp as 4824B001?\u003c\/strong\u003e\u003cbr\u003eYes, LV-LP33 and 4824B001 both refer to this same bare bulb, rated 330W and 2,000 hours, built for the Canon LV-7590. Either code will match when you check it against your projector's documentation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my old housing is still good to reuse?\u003c\/strong\u003e\u003cbr\u003eCheck the housing for cracks, discolouration or a burnt smell around the old bulb's socket. If it looks intact and the connector pins are not damaged, it should accept this bare replacement bulb without issue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I handle the new bulb differently to the housing version?\u003c\/strong\u003e\u003cbr\u003eYes, avoid touching the glass envelope with bare fingers, since skin oils can shorten bulb life once it heats up. Hold it by its base or wear gloves while fitting it into the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should the 4824B001 lamp last?\u003c\/strong\u003e\u003cbr\u003eIt carries a manufacturer rating of 2,000 hours at 330W, though actual life depends on factors such as how long the projector runs per session and its operating environment.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182615245036,"sku":"LA-08582","price":181.01,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/32387-lg.png?v=1786960466"},{"product_id":"5322b001-projector-lamp","title":"5322B001 Bare Projector Lamp","description":"\u003cp\u003e5322B001 ships here as a bare bulb, without housing, built for the Canon LV-7490 and LV-8320 projectors. It runs at 245W and carries a 3,000-hour rating. Canon's own reference for the same part is LV-LP34. This listing has no photograph of the specific lamp, so refer to the codes and specification here rather than an image when checking the match.\u003c\/p\u003e\u003cp\u003eAs a bare bulb, 5322B001 is fitted inside the housing your LV-7490 or LV-8320 already has, rather than replacing the housing itself. LV-LP34 describes this identical lamp, so either code confirms a match. A complete module version of the same lamp, with a new housing included, is also listed separately if that suits your projector better.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 245 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08574\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't there a photo of this specific lamp?\u003c\/strong\u003e\u003cbr\u003eNo individual photograph is available for this listing, so the image shown is a general placeholder rather than the exact bulb. The part details, codes and specification on this page are accurate; rely on those rather than the picture when confirming a match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LV-7490 use the same lamp as the LV-8320?\u003c\/strong\u003e\u003cbr\u003eYes, both projectors take the 5322B001 bare bulb, also referenced as LV-LP34. The two models sit in different parts of Canon's LV range but share this same lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat am I actually receiving with this order?\u003c\/strong\u003e\u003cbr\u003eYou receive the bare bulb only, 5322B001, also known as LV-LP34, without a housing. It is designed to fit inside the housing your projector already has, rather than replacing that housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check on the old housing before fitting this bulb?\u003c\/strong\u003e\u003cbr\u003eLook for cracks, discolouration or damaged connector pins on the existing housing. If it is in sound condition, it should accept this bare bulb without needing any adapter or extra part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat service life does Canon quote for the 5322B001 bulb?\u003c\/strong\u003e\u003cbr\u003e5322B001 is rated for 3,000 hours at 245W. As with any projector lamp, real-world life depends on usage patterns, including how often the projector is switched on and off.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182615867628,"sku":"LA-08574","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"poa-lmp17-projector-lamp-module","title":"POA-LMP17 projector lamp module","description":"\u003cp\u003ePOA-LMP17 is a complete module rated at 160 watts with a 2000-hour service life, and it was used across six different projector brands built on the same platform. That list runs from the Sanyo PLC-SP10 and PLC-XP10 series through the Eiki LC-XGA980 and LC-SVGA870U, the Canon LV-5500, the Boxlight MP-20T and MP-30T, the Proxima DP-5950 and DP-9250, and the Toshiba LV-5500.\u003c\/p\u003e\u003cp\u003eTwo codes cover this lamp: POA-LMP17 and the Japan-market POA-LMP17J, along with 610-276-3010, which is also listed separately as a bare-bulb version of the same lamp for buyers who only need to replace the bulb inside an existing housing. This listing is the full module, bulb and housing together, so it is the option to choose if your current housing is cracked, discoloured or otherwise due for replacement.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 160 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-11625\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 17 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between this module and the 610-276-3010 bare lamp?\u003c\/strong\u003e\u003cbr\u003eThis listing includes the full housing along with the bulb, while 610-276-3010 is the bulb only, for fitting into a housing you already have. Both use the same underlying lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Sanyo models take the POA-LMP17?\u003c\/strong\u003e\u003cbr\u003eThe PLC-SP10, PLC-SP10E, PLC-SP10N, PLC-XP10E and PLC-XP10N all use this lamp. Sanyo's own reference for it is POA-LMP17, with POA-LMP17J used on some Japan-market units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do Boxlight, Canon, Eiki, Proxima, Sanyo and Toshiba all list the same lamp?\u003c\/strong\u003e\u003cbr\u003eThese projectors were built on a shared engineering platform and rebadged for different markets and brands, so despite the different model names they take an identical lamp module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should I expect this lamp to last?\u003c\/strong\u003e\u003cbr\u003eIt carries a 2000-hour rating at its 160-watt setting. That figure describes typical service life under normal use rather than a fixed cut-off point, and running the projector at a reduced brightness setting where available can help it last toward the upper end of that range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to do anything to the projector after fitting a new lamp?\u003c\/strong\u003e\u003cbr\u003eMany projectors track lamp hours and will prompt you to reset a usage counter after fitting a replacement, usually through an on-screen menu; check your projector's manual for the exact steps.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182616326380,"sku":"LA-11625","price":119.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/36958-xl.png?v=1786965705"},{"product_id":"5322b001-projector-lamp-module","title":"5322B001 Projector Lamp with Module","description":"\u003cp\u003eThe same 5322B001 lamp is available here as a complete module, pairing the 245W, 3,000-hour bulb with a new housing rather than the bare bulb alone. It fits the Canon LV-7490 and LV-8320, and Canon's own reference for the part is LV-LP34. Choosing the module means the old housing is retired along with the old bulb.\u003c\/p\u003e\u003cp\u003eIf your existing housing shows wear, or you would simply rather not reuse it, this module version replaces both in one step, unlike the bare-bulb listing for the same 5322B001 code. LV-LP34 and 5322B001 both describe this lamp regardless of which format you choose. Confirm your projector reads LV-7490 or LV-8320 before ordering, since the two share this one part.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 245 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08575\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy choose the module over the bare bulb version?\u003c\/strong\u003e\u003cbr\u003eThe module replaces the housing as well as the bulb, which suits anyone whose existing housing is worn, cracked, or simply preferred to be renewed. The bare-bulb listing for the same 5322B001 lamp is available separately if you'd rather keep your current housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the lamp inside this module the same as the bare bulb listing?\u003c\/strong\u003e\u003cbr\u003eYes, both listings use the identical 5322B001 lamp, also referenced as LV-LP34, rated 245W and 3,000 hours. The only difference is whether a new housing comes with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LV-8320 need this module, or would the bare bulb do?\u003c\/strong\u003e\u003cbr\u003eEither works for the LV-8320, since both listings share the same 5322B001 lamp. Choose the module if you want a new housing included, or the bare bulb if your current housing is still sound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill I need to reset anything on the projector after fitting?\u003c\/strong\u003e\u003cbr\u003eSome Canon LV projectors prompt a lamp-hour reset from their setup menu once a new module is detected. The steps vary by model, so check your projector's own menu system if this applies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'original' mean on this listing?\u003c\/strong\u003e\u003cbr\u003eIt means the lamp and housing are built to Canon's specification for the LV-7490 and LV-8320, rather than a generic aftermarket part made to approximate fit.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182616522988,"sku":"LA-08575","price":137.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28924-xl.png?v=1786959199"},{"product_id":"1311b001-aa-projector-lamp-module","title":"1311B001\/AA Projector Lamp with Module","description":"\u003cp\u003eREALiS SX6 and X600, along with their XEED-branded equivalents, take the 1311B001\/AA lamp module. Canon also lists this part as 2678B001\/AA and as RS-LP02, all describing the identical 230W, 2,000-hour assembly. Four model names cover what is, mechanically, one projector platform shared between Canon's REALiS and XEED lines.\u003c\/p\u003e\u003cp\u003eWith three separate codes attached to this one lamp, 1311B001\/AA, 2678B001\/AA and RS-LP02, any of them will match if you're checking against documentation for your specific projector. REALiS and XEED are Canon's regional naming for the same SX6\/X600 platform, so the branding on your projector does not change which lamp fits. This is supplied as a complete module.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 230 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08598\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy are there three different codes for this lamp?\u003c\/strong\u003e\u003cbr\u003eCanon's documentation for the REALiS and XEED branding of this projector, plus revisions over the part's production run, has resulted in three references, 1311B001\/AA, 2678B001\/AA and RS-LP02, all for the identical lamp module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SX6 the same projector as the X600?\u003c\/strong\u003e\u003cbr\u003eREALiS SX6 and REALiS X600 are Canon's naming for the same model in different markets, as are XEED SX6 and XEED X600. All four take this 1311B001\/AA module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is RS-LP02?\u003c\/strong\u003e\u003cbr\u003eRS-LP02 is another Canon reference for this same lamp, alongside 1311B001\/AA and 2678B001\/AA. All three point to the identical 230W, 2,000-hour module built for the SX6 and X600 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I handle the old lamp once it's removed?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully before removing the old module, and avoid touching the glass on the new one with bare hands. Dispose of the old lamp according to your local electronics recycling guidance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this lamp's rated life?\u003c\/strong\u003e\u003cbr\u003e1311B001\/AA is rated for 2,000 hours at 230W. As with most projector lamps, actual life varies with how often the projector is used and for how long each session.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182617276652,"sku":"LA-08598","price":281.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23772-xl.png?v=1786957093"},{"product_id":"50029923-projector-lamp-module","title":"50029923 Projector Lamp with Module","description":"\u003cp\u003eLV-X6, LV-X7 and a run of NEC VT-series projectors all take the 50029923 lamp module. The NEC models covered are the VT48, VT48G, VT48J, VT49, VT57, VT58, VT59 and VT59G. Running at 150W with a 3,000-hour rating, the same part is also referenced as LV-LP27 by Canon and VT80LP by NEC.\u003c\/p\u003e\u003cp\u003eBecause Canon and NEC use their own separate codes for this shared lamp, LV-LP27 and VT80LP respectively, quoting whichever one matches your projector's own documentation is the simplest way to order correctly. With eight NEC models on the list, checking the exact suffix, such as VT48 against VT48G, is worth doing before you buy. This is a complete module.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08596\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do Canon and NEC projectors share this lamp?\u003c\/strong\u003e\u003cbr\u003eCanon's LV-X6 and LV-X7 were built on a projector engine also used by NEC's VT-series, so both brands standardised on the identical 50029923 lamp module rather than each sourcing a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs VT80LP the same as 50029923?\u003c\/strong\u003e\u003cbr\u003eYes, VT80LP is NEC's own reference for this lamp, identical to the module listed here as 50029923 and to Canon's LV-LP27. All three describe the same 150W, 3,000-hour part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I tell NEC's VT48 and VT48G apart?\u003c\/strong\u003e\u003cbr\u003eCheck the full model code on your projector's rating label. The VT48, VT48G and VT48J are separate variants within NEC's range, though all of them, along with the VT49 and VT57 to VT59G, share this same lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does this listing include?\u003c\/strong\u003e\u003cbr\u003eThe 50029923 module includes the bulb fitted inside its housing and connector, so the complete assembly is exchanged as one unit rather than fitting a bare lamp into an existing housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the projector need a lamp counter reset?\u003c\/strong\u003e\u003cbr\u003eSome NEC and Canon models in this range prompt a reset from the setup menu once a new lamp is detected. Check your specific projector's on-screen menu, since the steps differ between brands and firmware versions.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182617964780,"sku":"LA-08596","price":130.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34714-xl.png?v=1786964301"},{"product_id":"11357005-projector-lamp-module","title":"11357005 Projector Lamp with Module","description":"\u003cp\u003eFive brands, Canon, Dukane, NEC, Smartboard and Utax, all use the 11357005 lamp across eleven different projectors. That includes Canon's LV-X5, Dukane's Image Pro 8771, NEC's VT37, VT47, VT47J, VT570 and VT575, Smartboard's 2000i-DVX-03XXX and 50025479, and the Utax DXL 5015. It runs at 130W and carries a 3,000-hour rating.\u003c\/p\u003e\u003cp\u003eThis lamp carries an unusually long list of reference codes across its five brands: LV-LP25 for Canon, VT70LP for NEC and Smartboard, 456-8771 and 465-8771 for Dukane, and 01-00162 elsewhere. All of them, along with 50025479, describe the identical 11357005 module. Given the spread of brands and codes, matching your projector's exact model name against the list above is more reliable than the code alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 130 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08594\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 11 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does this lamp have so many different codes?\u003c\/strong\u003e\u003cbr\u003eFive separate brands, Canon, Dukane, NEC, Smartboard and Utax, each use their own part-numbering system for what is mechanically the same 11357005 lamp, which is why references such as LV-LP25, VT70LP and 456-8771 all point to this one module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs VT70LP the same lamp as 50025479?\u003c\/strong\u003e\u003cbr\u003eYes, VT70LP and 50025479 both describe the identical 11357005 module, used by NEC and Smartboard respectively among other brands. Any of the listed codes will confirm the same part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy Dukane projector shows 456-8771, does that match this listing?\u003c\/strong\u003e\u003cbr\u003eYes, 456-8771 is one of Dukane's references for this lamp, alongside 465-8771. Both describe the same 11357005 module fitted to the Dukane Image Pro 8771, so either code confirms a match against your documentation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which brand's code to quote when ordering?\u003c\/strong\u003e\u003cbr\u003eYou don't need to pick one; quoting your projector's model name, such as NEC VT570 or Utax DXL 5015, is enough for us to confirm the match, since all the codes on this listing point to the same lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the rated life of this lamp?\u003c\/strong\u003e\u003cbr\u003e11357005 is rated for 3,000 hours at 130W. Actual lamp life depends on factors such as session length and how often the projector is powered on and off.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182618783980,"sku":"LA-08594","price":130.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/35031-xl.png?v=1786965265"},{"product_id":"1312b001ba-projector-lamp-module","title":"1312B001BA Projector Lamp with Module","description":"\u003cp\u003e1312B001BA is the module Canon built for its SX60 projector, listed here under both the REALiS and XEED branding as well as a plain 'SX60' reference. The same lamp also carries the code RS-LP03 in Canon's own documentation. As a complete module, it replaces the bulb and its housing together in a single exchange.\u003c\/p\u003e\u003cp\u003eRS-LP03 and 1312B001BA both describe this identical lamp, so either code will match if you're cross-checking against your projector's service label. Because REALiS and XEED are simply Canon's regional names for the same SX60 platform, the branding printed on your projector does not affect which module you need. Confirm the SX60 model number itself before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08607\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is RS-LP03?\u003c\/strong\u003e\u003cbr\u003eRS-LP03 is Canon's alternative reference for this same lamp module, identical to the part listed here as 1312B001BA. Either code confirms the correct match for the SX60 projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs REALiS SX60 the same projector as XEED SX60?\u003c\/strong\u003e\u003cbr\u003eYes, REALiS and XEED are Canon's naming conventions for the same SX60 projector platform in different markets. Both take the identical 1312B001BA lamp module, so the branding on your unit does not change which lamp to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I confirm the 1312B001BA module suits my SX60 before buying?\u003c\/strong\u003e\u003cbr\u003eConfirm your projector's model plate reads SX60, whether under the REALiS or XEED name. Since Canon's SX range covers several distinct lamp types across different models, checking the exact number is worth the extra step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the housing replaced along with the bulb?\u003c\/strong\u003e\u003cbr\u003eYes, 1312B001BA is a complete module, so the housing is replaced along with the bulb as a single assembly, rather than fitting a bare lamp inside your existing housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should I handle the lamp once it's out of the packaging?\u003c\/strong\u003e\u003cbr\u003eAvoid touching the glass directly with bare fingers, and keep the module in its box until you're ready to fit it. Let any lamp you remove cool fully before handling it.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182619373804,"sku":"LA-08607","price":302.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26153-xl.png?v=1786958714"},{"product_id":"4824b001-projector-lamp-module","title":"4824B001 Projector Lamp with Module","description":"\u003cp\u003e4824B001 also comes as a full module here, adding a new housing to the same 330W, 2,000-hour bulb used in the bare-lamp listing. It fits Canon's LV-7590 as well as Casio's YL-4A and YL-4B projectors, which share this lamp despite the different badge on the case. Canon's own reference for the part is LV-LP33.\u003c\/p\u003e\u003cp\u003eChoosing this module over the bare-bulb version of 4824B001 means the housing is replaced as well, which is worth doing if your existing housing shows any wear. LV-LP33 and 4824B001 both refer to the identical lamp regardless of format. Casio's YL-4A and YL-4B share a model number with only the suffix differing, so either one takes this same module.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08583\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do Canon and Casio share this lamp?\u003c\/strong\u003e\u003cbr\u003eCasio's YL-4A and YL-4B projectors were built on the same engine as Canon's LV-7590, so both brands use the identical 4824B001 lamp and housing rather than separate parts for each badge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I buy this module or the bare bulb listing?\u003c\/strong\u003e\u003cbr\u003eChoose this module if you'd like a new housing along with the bulb, or the separate bare-bulb listing for 4824B001 if your current housing is still in good condition and you only need the lamp itself replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between Casio's YL-4A and YL-4B?\u003c\/strong\u003e\u003cbr\u003eThe 'A' and 'B' suffixes denote variants within Casio's YL-4 line, but both take the same 4824B001 lamp module, so the difference does not change which part you need to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I be sure this fits my LV-7590?\u003c\/strong\u003e\u003cbr\u003eCanon lists 4824B001, also known as LV-LP33, as the lamp for the LV-7590 specifically, with no other Canon model sharing this part. Matching that single model number is enough to confirm the fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much use will the 4824B001 module typically give before replacement?\u003c\/strong\u003e\u003cbr\u003e4824B001 is rated for 2,000 hours at 330W. Real-world lamp life varies with usage, including how long the projector runs per session and how often it is switched on and off.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182620029164,"sku":"LA-08583","price":280.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/20506-xl.png?v=1786955677"},{"product_id":"4965b001-projector-lamp-module","title":"4965B001 Projector Lamp with Module","description":"\u003cp\u003eWUX4000 and WUX4000D share a single lamp module here: 4965B001, also referenced by Canon as RS-LP06. The same part covers the XEED-branded WUX4000 as well as the REALiS versions. Running at 330W with a 3,000-hour rating, it is supplied complete, with the bulb already fitted inside its housing.\u003c\/p\u003e\u003cp\u003eRS-LP06 and 4965B001 both describe this identical lamp, so either code will match against your projector's service documentation. Because the 'D' suffix on the WUX4000D denotes a variant within the same range, and REALiS\/XEED are simply regional branding, none of those differences change which module fits, all take this one part. Confirm the WUX4000 model number itself before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08604\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 3 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is RS-LP06?\u003c\/strong\u003e\u003cbr\u003eRS-LP06 is Canon's alternative reference for this lamp, identical to the module listed here as 4965B001. Either code confirms the same part for the WUX4000 range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the WUX4000D use a different lamp to the standard WUX4000?\u003c\/strong\u003e\u003cbr\u003eNo, both the WUX4000 and the WUX4000D take the identical 4965B001 module. The 'D' suffix denotes a feature variant within the range rather than a different lamp requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs REALiS WUX4000 the same as XEED WUX4000?\u003c\/strong\u003e\u003cbr\u003eYes, REALiS and XEED are Canon's naming for the same WUX4000 projector in different markets. Both share this 4965B001 lamp module, so the branding on your unit does not matter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat runtime is the 4965B001 lamp rated for in the REALiS WUX4000?\u003c\/strong\u003e\u003cbr\u003e4965B001 is rated for 3,000 hours at 330W. Actual life depends on how the projector is used, including session length and how frequently it is switched on and off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with this module?\u003c\/strong\u003e\u003cbr\u003eThe module includes the bulb pre-fitted inside its housing and connector, so you exchange the whole assembly as one unit rather than seating a bare lamp inside an existing housing.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182620750060,"sku":"LA-08604","price":285.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/27574-xl.png?v=1786959010"},{"product_id":"03-000754-02p-projector-lamp","title":"03-000754-02P Bare Projector Lamp","description":"\u003cp\u003eTwenty-three projectors from four brands take the 03-000754-02P bare bulb: Canon's LV-5210, LV-5220 and LV-5220E; Christie's LX25a; a wide Eiki LC-SB and LC-XB line; and Sanyo's PLC-SL20, PLC-SU50 and PLC-XU series. Rated 200W and 1,500 hours, this is the lamp alone, without housing, and no individual photograph is available for this specific listing.\u003c\/p\u003e\u003cp\u003eSanyo's own reference for this lamp is POA-LMP65, while our other listed codes are 610-307-7925 and LV-LP19, all of them, plus 03-000754-02P, describing the identical bare bulb. With twenty-three model names on the compatibility list, from the Eiki LC-SB15 to the Sanyo PLC-XU56, matching your projector's exact model is more reliable than the shared LC-SB or LC-XB naming alone.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 1,500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08564\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 23 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy are there so many compatible projectors listed?\u003c\/strong\u003e\u003cbr\u003eCanon, Christie, Eiki and Sanyo built several models on a shared projector engine during this generation, so twenty-three projectors across the four brands ended up using the identical 03-000754-02P bare bulb rather than separate lamps for each range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is POA-LMP65?\u003c\/strong\u003e\u003cbr\u003ePOA-LMP65 is Sanyo's own reference for this lamp. It is the same bare bulb listed here as 03-000754-02P, 610-307-7925 and LV-LP19, all describing one 200W, 1,500-hour part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I check my Eiki model matches this listing?\u003c\/strong\u003e\u003cbr\u003eMatch the full code on your projector's rating label, such as LC-SB21D or LC-XB26, against the list on this page, since the LC-SB and LC-XB families both include several distinct models that share this lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is only a stand-in image shown for 03-000754-02P?\u003c\/strong\u003e\u003cbr\u003eNo individual photograph is available for this bare-bulb listing, so a general placeholder is shown. Rely on the part codes and specification on the page to confirm the match rather than the picture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the existing housing need to be replaced too?\u003c\/strong\u003e\u003cbr\u003eNot necessarily; this is a bare bulb designed to fit inside the housing your projector already has, provided that housing is in sound condition with undamaged connector pins.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182621536492,"sku":"LA-08564","price":148.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"2481b001-projector-lamp","title":"2481B001 Bare Projector Lamp","description":"\u003cp\u003eLV-7365 is the only projector listed against this lamp, 2481B001, also known by Canon's reference LV-LP30. It runs at 200W with a 2,000-hour rating and is supplied as a bare bulb, without housing, for fitting inside your existing LV-7365 housing. No individual photograph is available for this listing, so the picture shown is a placeholder.\u003c\/p\u003e\u003cp\u003eBecause this is a single-model lamp, confirming your projector reads LV-7365 on its rating label is generally enough to know this is the right part. LV-LP30 and 2481B001 both describe the identical bulb. If your housing is worn or you would rather replace both together, check whether a module version of this lamp is listed separately.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08572\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs LV-LP30 the same as 2481B001?\u003c\/strong\u003e\u003cbr\u003eYes, LV-LP30 and 2481B001 both refer to this same bare bulb, rated 200W and 2,000 hours, built specifically for the Canon LV-7365. Either code will match when checked against your projector's documentation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes any other Canon projector use this lamp?\u003c\/strong\u003e\u003cbr\u003eNo, the LV-7365 is the only projector listed against 2481B001 in our records. If your projector is a different LV model, check its own listing rather than assuming this bulb fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't there a specific photo for this lamp?\u003c\/strong\u003e\u003cbr\u003eNo individual photograph exists for this listing, so a general placeholder image is shown instead. The part codes and specification given here are accurate and should be used to confirm the match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat condition should my existing housing be in to reuse it?\u003c\/strong\u003e\u003cbr\u003eCheck for cracks, discolouration or damage around the connector pins. A housing in sound condition should accept this bare bulb without any adapter or extra part being needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is 2481B001 rated to last?\u003c\/strong\u003e\u003cbr\u003eIt carries a rating of 2,000 hours at 200W. As with most projector lamps, real-world life depends on how the projector is used, including run time per session.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182622191852,"sku":"LA-08572","price":144.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lv-lp35-projector-lamp-module","title":"LV-LP35 projector lamp module","description":"\u003cp\u003eCanon specifies the LV-LP35 as the lamp for a long run of its LV projectors, from the LV-7290 and LV-7295 through the LV-7390 series to the higher-numbered LV-8225, LV-8227M and LV-8277A. Rated at 215 watts, it carries a 4000-hour service life, among the longer ratings we stock, and no alternative part number is listed for it.\u003c\/p\u003e\u003cp\u003eWith 17 models sharing this one code, the safest approach is to look for the exact suffix on your projector's badge, since A, M and S variants of the same base number, such as LV-7292A, LV-7292M and LV-7292S, are listed individually rather than assumed identical. This is a complete module, so it installs with its housing already attached.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 215 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 4,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08571\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 17 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the LV-LP35 have an alternative part number?\u003c\/strong\u003e\u003cbr\u003eNo, LV-LP35 is the only code listed for this lamp. It is Canon's own reference and covers the full LV-7290 to LV-8277A range on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are there separate listings for LV-7292A, LV-7292M and LV-7292S?\u003c\/strong\u003e\u003cbr\u003eThese suffixes typically denote different lens or network options on the same projector body. They still take this identical lamp, but we list them separately to help you match your exact unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the LV-LP35 rated to last?\u003c\/strong\u003e\u003cbr\u003e4000 hours at 215 watts, one of the longer lamp-life ratings across the projectors we stock, though real-world life depends on usage patterns and ventilation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LV-LP35 a bare bulb?\u003c\/strong\u003e\u003cbr\u003eNo, it is a complete module. The bulb comes fitted inside its housing, so the whole assembly is replaced as one unit rather than reusing your existing housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a safe way to handle the lamp once it is removed from the projector?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully first, then avoid touching the bulb's glass directly, and treat the old lamp as electronic waste rather than putting it in with household rubbish.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182622879980,"sku":"LA-08571","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/28712-xl.png?v=1786959191"}],"url":"https:\/\/www.lampsauthority.com\/collections\/canon-projector-lamps.oembed","provider":"Lamps Authority","version":"1.0","type":"link"}