{"title":"Acto projector lamps","description":"\u003cp\u003eReplacement projector lamps for Acto projectors — 33 lamps catalogued. Available as bare lamps (the bulb alone, fitted into the housing already in your projector) and as complete modules (bulb and housing together, ready to drop straight in).\u003c\/p\u003e\u003cp\u003eEvery lamp carries a genuine Philips, Osram or Ushio burner, ships free worldwide, and is covered by a 180-day guarantee. If you are not sure which your projector takes, check the code on the old lamp or send us a photo of the label.\u003c\/p\u003e","products":[{"product_id":"lmp-rac400-projector-lamp","title":"LMP-RAC400 bare projector lamp","description":"\u003cp\u003eLMP-RAC400 is a bare bulb rated at 215 watts with a 4,000-hour lamp life, built for the Acto RAC400. Supplied without a housing, it is fitted into the lamp cage already installed in the RAC400 rather than arriving as a complete assembly.\u003c\/p\u003e\u003cp\u003eWe list this lamp under a single code, LMP-RAC400, matching the part number Acto assigns to the RAC400's bulb. With a 4,000-hour rating it runs longer between replacements than many bare bulbs in this range, though actual life still depends on how often the projector is used.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 215 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 4,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08081\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs LMP-RAC400 only compatible with the RAC400?\u003c\/strong\u003e\u003cbr\u003eYes, this bulb is listed specifically for the Acto RAC400. If you have a different Acto model, its lamp will carry a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the rated life on this bulb compared to typical projector lamps?\u003c\/strong\u003e\u003cbr\u003eLMP-RAC400 is rated for 4,000 hours, which is on the longer side within this catalogue, where many bare bulbs are rated around 2,000 to 3,000 hours, meaning fewer replacements over the life of the projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the RAC400's cage part of the LMP-RAC400 order?\u003c\/strong\u003e\u003cbr\u003eNo, LMP-RAC400 is the bare bulb only. It fits into the housing already installed in your RAC400 rather than replacing the whole lamp cage, so keep that housing when removing the old bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage does the RAC400 lamp run at?\u003c\/strong\u003e\u003cbr\u003eLMP-RAC400 runs at 215 watts, the figure Acto specifies for the RAC400's lamp. This wattage figure applies to the bare bulb only and is the same rating used for the complete module, where one is listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to reset a lamp counter on the RAC400 after fitting this bulb?\u003c\/strong\u003e\u003cbr\u003eMany projectors in this class track lamp hours and prompt for a reset from the on-screen menu once a new bulb is fitted. Check the RAC400's lamp or service menu after installation to see whether a reset is needed.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182565437676,"sku":"LA-08081","price":169.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"33001685-projector-lamp-module","title":"33001685 projector lamp with module","description":"\u003cp\u003e33001685 is a complete lamp module, a 230-watt bulb fitted in its own housing, rated for 3,000 hours. It covers five projectors: Acto's DS110, DS111, DS112 and DS115, plus the Parrot OP0413, which shares the same internal hardware as the Acto DS range.\u003c\/p\u003e\u003cp\u003eWe list this module under the single code 33001685; check it against your current lamp before ordering if the old part is still legible. Because the housing is included, this is the version to choose if your existing cage is cracked or its connector has failed, rather than simply worn out.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 230 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08062\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat links the Parrot OP0413 to the Acto DS series?\u003c\/strong\u003e\u003cbr\u003eThe OP0413 is built on the same platform as Acto's DS110 through DS115 models, which is why it shares the identical 33001685 lamp module rather than having its own separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I tell the DS110 apart from the DS115?\u003c\/strong\u003e\u003cbr\u003eThe model number is printed on a label on the projector itself, usually near the lamp door or on the base. All four DS models, DS110 to DS115, take the same 33001685 module regardless of which one you have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bare bulb version of 33001685 available?\u003c\/strong\u003e\u003cbr\u003eThis listing covers the complete module, bulb and housing together. If you only need the bulb because your current housing is undamaged, check whether a bare version is listed separately for the same projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated life of this module?\u003c\/strong\u003e\u003cbr\u003e33001685 runs at 230 watts and is rated for 3,000 hours, a figure that applies across all five compatible projectors, the four Acto DS models and the Parrot OP0413.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a complete module instead of just a new bulb?\u003c\/strong\u003e\u003cbr\u003eA complete module makes sense when the housing itself is damaged, scorched or has a broken connector, since fitting a new bulb into that housing would not fix the underlying problem.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182566650092,"sku":"LA-08062","price":142.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-module.png?v=1786970169"},{"product_id":"acto-dx212st-lamp-projector-lamp","title":"ACTO-DX212ST-LAMP bare projector lamp","description":"\u003cp\u003eACTO-DX212ST-LAMP is a bare bulb built specifically for the Acto DX212ST short-throw projector. It supplies the bulb only, without a housing, so it fits into the lamp cage your DX212ST already carries rather than replacing the assembly as a whole.\u003c\/p\u003e\u003cp\u003eThis lamp is listed under a single code, ACTO-DX212ST-LAMP, which names the exact projector it fits within the part number itself. Before fitting, check the housing removed from your DX212ST for cracking or scorch marks, since a damaged cage should be replaced rather than reused with this new bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08063\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the part number tell me anything about compatibility?\u003c\/strong\u003e\u003cbr\u003eYes. ACTO-DX212ST-LAMP includes the projector model in its own code, confirming it is built specifically for the Acto DX212ST rather than a wider range of models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs DX212ST related to other DX models Acto also sells?\u003c\/strong\u003e\u003cbr\u003eThis lamp is listed against the DX212ST specifically. If your projector's exact name differs, even slightly, check its own listing rather than assuming this bulb applies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include a housing for the DX212ST?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare bulb. It is fitted into the lamp housing already installed inside your DX212ST rather than arriving as a full module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is no lamp life shown for this bulb?\u003c\/strong\u003e\u003cbr\u003eAn hours rating has not been published for ACTO-DX212ST-LAMP, so none is listed here rather than estimated. Watching for a dimming or flickering image on the DX212ST is the better guide to when a replacement is due.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the safest way to fit this bulb into my existing housing?\u003c\/strong\u003e\u003cbr\u003eLet the DX212ST cool fully, open the housing carefully, and seat the new bulb in the same position and orientation as the one removed before closing the cage and refitting it.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182567403756,"sku":"LA-08063","price":240.63,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-lx5200-lamp-projector-lamp","title":"ACTO-LX5200-LAMP bare projector lamp","description":"\u003cp\u003eACTO-LX5200-LAMP is the lamp fitted across four Acto AT-X projectors: the AT-X5200, AT-X5300, AT-X5350 and AT-X8280. Rated at 200 watts with a 2000-hour life, it ships as a bare bulb for fitting into your existing housing rather than a full module. One code covers all four models.\u003c\/p\u003e\u003cp\u003eBecause one part number, ACTO-LX5200-LAMP, covers four different AT-X projectors, you do not need to hunt for a model-specific code if your unit is one of the four listed. This is a bare lamp, so fitting it means swapping only the bulb inside your current housing. Confirm your model reads AT-X5200, AT-X5300, AT-X5350 or AT-X8280 before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08059\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes one ACTO-LX5200-LAMP fit all four AT-X projectors?\u003c\/strong\u003e\u003cbr\u003eYes. Acto uses the same lamp across the AT-X5200, AT-X5300, AT-X5350 and AT-X8280, so a single part number, ACTO-LX5200-LAMP, covers all four models rather than needing a separate code for each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wattage is this lamp?\u003c\/strong\u003e\u003cbr\u003eIt is rated at 200 watts, matching the specification of the original bulb fitted at the factory across the AT-X5200, AT-X5300, AT-X5350 and AT-X8280 projectors from Acto.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hours is the ACTO-LX5200-LAMP rated for?\u003c\/strong\u003e\u003cbr\u003eThis lamp is listed for 2000 hours of use. As with any projector bulb, brightness fades gradually over that period rather than the lamp failing all at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp bare or does it come with a housing?\u003c\/strong\u003e\u003cbr\u003eIt is supplied as a bare lamp only, so you fit it into the housing already inside your AT-X projector rather than replacing the housing itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this lamp fit an AT-X8280 as well as an AT-X5200?\u003c\/strong\u003e\u003cbr\u003eYes, ACTO-LX5200-LAMP is the same part across all four listed projectors, including the AT-X8280 and the AT-X5200, so ordering by this code is correct for either model.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182569304300,"sku":"LA-08059","price":135.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25230-lg.png?v=1786958341"},{"product_id":"acto-lx8000-lamp-projector-lamp","title":"ACTO-LX8000-LAMP bare projector lamp","description":"\u003cp\u003eFour Acto projectors share the ACTO-LX8000-LAMP: the LX8000, LX8100, LX8100F and LX8200 all take the same 330-watt bulb, rated for 3000 hours of use. It is supplied bare, for fitting into the housing already inside your projector, and carries Acto's own part code rather than a generic substitute.\u003c\/p\u003e\u003cp\u003eWith four projectors sharing one code, check your model plate against LX8000, LX8100, LX8100F or LX8200 before ordering so you buy the right lamp on the first attempt. As a bare bulb it replaces only the lamp itself; the housing inside your projector is reused. The 3000-hour rating applies across all four models equally.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08077\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 4 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the LX8100F use the same lamp as the standard LX8100?\u003c\/strong\u003e\u003cbr\u003eYes. Acto lists ACTO-LX8000-LAMP as the shared lamp for the LX8000, LX8100, LX8100F and LX8200, so the F variant does not need a different part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the lamp life on this bulb?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 3000 hours of use, and that figure applies equally whether it is fitted in an LX8000, LX8100, LX8100F or LX8200. Treat it as a guide to expected brightness rather than a fixed cut-off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this bulb keep my LX8100 as bright as the factory lamp?\u003c\/strong\u003e\u003cbr\u003eYes. It runs at 330 watts, matching the specification originally fitted across the LX8000, LX8100, LX8100F and LX8200, so performance stays consistent with the factory bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a bare lamp or a full module?\u003c\/strong\u003e\u003cbr\u003eIt is supplied bare, so you fit it into the housing that is already inside your LX8000-series projector rather than replacing the housing as well. All four compatible models use this same bare-lamp design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use ACTO-LX8000-LAMP in an LX8200?\u003c\/strong\u003e\u003cbr\u003eYes. The LX8200 is one of the four projectors this lamp is listed for, alongside the LX8000, LX8100 and LX8100F, so the same part number is correct.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182569959660,"sku":"LA-08077","price":210.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/23973-lg.png?v=1786957442"},{"product_id":"acto-lx228-lamp-projector-lamp","title":"ACTO-LX228-LAMP bare projector lamp","description":"\u003cp\u003eACTO-LX228-LAMP is the manufacturer code for the bare lamp used in Acto's LX228 projector. Supplied without a housing, it fits into the assembly already inside your unit, and is the genuine part number rather than a projector-matched substitute. The same lamp is also available as a complete module for anyone whose housing needs replacing too.\u003c\/p\u003e\u003cp\u003eBecause ACTO-LX228-LAMP is Acto's own code, ordering it removes any guesswork about matching a bulb to your LX228, the part number is the same regardless of the housing it came in. This is a bare lamp, so only the bulb is replaced; if your housing is damaged, the module version is the better choice. Check your projector reads LX228 before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08071\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs ACTO-LX228-LAMP the genuine Acto part number?\u003c\/strong\u003e\u003cbr\u003eYes, this is Acto's own code for the LX228's lamp, not a part number we have assigned ourselves to match a projector that otherwise has none published for its bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I buy this bare lamp or the module version?\u003c\/strong\u003e\u003cbr\u003eChoose this bare lamp if your existing housing is intact, it's the cheaper option. If the housing itself is cracked or the mounting tabs have failed, the module version pairs the same lamp with a new housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes ACTO-LX228-LAMP fit any projector besides the LX228?\u003c\/strong\u003e\u003cbr\u003eNo, this code is matched specifically to the LX228 in this catalogue and is not listed against any other Acto model, including similarly named projectors in the LX range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you list the wattage or rated hours for this lamp?\u003c\/strong\u003e\u003cbr\u003eThose figures are not included in this listing. What we can confirm is the part number, ACTO-LX228-LAMP, and that it is a bare bulb for the LX228.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs shipping free on ACTO-LX228-LAMP?\u003c\/strong\u003e\u003cbr\u003eYes, shipping is free worldwide, so the checkout price matches the price shown here for the LX228 lamp, with no delivery charge added at any stage of the order.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182572450028,"sku":"LA-08071","price":125.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"1300022500-projector-lamp-module","title":"1300022500 projector lamp with module","description":"\u003cp\u003ePart number 1300022500 is a complete lamp-and-module unit shared across an unusually wide spread of brands: Acto, Ask, Esprit, Proxima and SPECKTRON. It covers 19 listed projectors, from the Ask LX200 and S2325W to the SPECKTRON XL-235 and XL-240, with the housing already fitted so there is nothing to transfer from the old unit.\u003c\/p\u003e\u003cp\u003eAn alternative code, 3400338501, refers to the same lamp, so either number should turn up this listing. Because it is supplied as a module, fitting is a case of removing the spent unit and locking the new one into the same bay; no separate bulb swap is needed. With 19 compatible projectors listed, it is worth matching your exact model before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08068\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 19 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs 3400338501 a different lamp to 1300022500?\u003c\/strong\u003e\u003cbr\u003eNo, they are the same lamp under two codes. Whether your documentation or old label shows 1300022500 or 3400338501, this listing is the correct replacement for both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do Ask and Proxima projectors share this same part?\u003c\/strong\u003e\u003cbr\u003eIn our data the Ask and Proxima ranges overlap heavily, with models such as the C3307 and S2325W listed under both brand names, so a single lamp module covers both brands' projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp come with a wattage rating listed?\u003c\/strong\u003e\u003cbr\u003eWe do not hold a published wattage or lamp-life figure for 1300022500, so we have not stated one here. What we can confirm is the full list of compatible projectors above, which is the safest way to check fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to fit anything into the old housing?\u003c\/strong\u003e\u003cbr\u003eNo. This is a lamp-with-module unit, so the housing is already built in. You remove the old module as a whole and fit this one in its place, without handling the bulb separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many projector models does 1300022500 cover?\u003c\/strong\u003e\u003cbr\u003eNineteen, spread across Acto, Ask, Esprit, Proxima and SPECKTRON, including the SPECKTRON XL-235 and XL-240 and the Ask LX200. Check your model against the full compatibility list before ordering to be sure it is included.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182595453164,"sku":"LA-08068","price":132.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26779-xl.png?v=1786958818"},{"product_id":"1300052500-projector-lamp-module","title":"1300052500 projector lamp with module","description":"\u003cp\u003eActo and SPECKTRON share more than a lamp supplier: both brands' short-throw and interactive projectors, from the Acto LW210 and LX-series to the SPECKTRON WL-430UST and XL-420ST, are built around the same 1300052500 lamp module. This version includes the full housing, not just the bulb.\u003c\/p\u003e\u003cp\u003eBecause one module covers such a wide range of Acto and SPECKTRON models, it is worth confirming your exact projector name against the list before ordering rather than going by brand alone. A module replacement is generally simpler to fit than a bare lamp, since the housing and reflector are already aligned.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08080\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 12 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do Acto and SPECKTRON share the same lamp module?\u003c\/strong\u003e\u003cbr\u003eSome projector ranges are built on shared engineering between brands, and 1300052500 is the module both the Acto LX and LW series and the SPECKTRON short-throw models were designed around.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this module fit the SPECKTRON WL-430UST specifically?\u003c\/strong\u003e\u003cbr\u003eYes. The WL-430UST is one of two SPECKTRON models listed against 1300052500, alongside the XL-420ST, so this module is a direct fit with the housing already aligned to the lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the housing included, or do I need the bare bulb?\u003c\/strong\u003e\u003cbr\u003eThis listing is the full module, meaning the lamp and its housing arrive as one assembly ready to install, unlike the bare version of the same lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy Acto is a RAC model rather than an LX or LW, does it still use 1300052500?\u003c\/strong\u003e\u003cbr\u003eYes, the RAC100, RAC200, RAC500, RAC1100 and RAC1200 are all listed against this same module alongside the LX and LW ranges, so an RAC badge does not need a different lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which of the twelve listed projectors I have?\u003c\/strong\u003e\u003cbr\u003eCheck the model name printed on the projector case or its rating label. All ten Acto models and both SPECKTRON models listed take the same 1300052500 module, so an exact name match is all you need.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182612295916,"sku":"LA-08080","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/30394-xl.png?v=1786959240"},{"product_id":"1300052500-projector-lamp","title":"1300052500 bare projector lamp","description":"\u003cp\u003eThis is the bare form of the 1300052500 lamp: the bulb on its own, without the housing that comes with the module version. It is built for the same wide spread of projectors, from Acto's LW and LX ranges through to the SPECKTRON WL-430UST and XL-420ST, plus the Parrot LCD XGA HDMI 2600 ANSI.\u003c\/p\u003e\u003cp\u003eChoose this bare listing only if your projector's own housing is still in good condition, since it does not include a replacement cage. The Parrot LCD XGA HDMI 2600 ANSI is the one model on this list outside the Acto and SPECKTRON brands, but it takes the identical 1300052500 lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08079\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 13 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Parrot projector have in common with the Acto and SPECKTRON models?\u003c\/strong\u003e\u003cbr\u003eNothing beyond the lamp itself. The Parrot LCD XGA HDMI 2600 ANSI simply happens to use the same 1300052500 lamp as the listed Acto and SPECKTRON projectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I buy the bare lamp or the module version?\u003c\/strong\u003e\u003cbr\u003eChoose bare if the housing inside your projector is undamaged and you only need a fresh bulb. If the housing itself is cracked or the reflector has degraded, the module version replaces both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the bare lamp come with any fitting hardware?\u003c\/strong\u003e\u003cbr\u003eNo, this listing is the bulb assembly only. It is designed to go directly into the housing your projector already has, with no cage, screws or module included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many projectors use this exact lamp?\u003c\/strong\u003e\u003cbr\u003eThirteen models across three brands are listed against 1300052500 in bare form: ten Acto models, the Parrot LCD XGA HDMI 2600 ANSI, and two SPECKTRON short-throw units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it safe to touch the bulb when fitting a bare lamp?\u003c\/strong\u003e\u003cbr\u003eAvoid handling the glass directly. Hold 1300052500 by its base or frame, since fingerprints on the bulb surface can create hot spots that shorten its working life.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182612951276,"sku":"LA-08079","price":201.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"1300022500-projector-lamp","title":"1300022500 bare projector lamp","description":"\u003cp\u003eFew lamps cross as many brands as 1300022500: it is listed against Acto's LX200, five Ask S and C-series models, the Esprit PST250X, the Kindermann KX 525W and two SPECKTRON XL units. The same bulb also carries the alternative code 3400338501, so either number identifies this lamp.\u003c\/p\u003e\u003cp\u003eWith ten projectors and five brands sharing one lamp, the safest way to order is by your projector's exact model name rather than by brand, since a Kindermann and an Ask model here take the identical bulb. Quote either 1300022500 or 3400338501 if you are matching against an old label.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08067\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does a Kindermann projector use the same lamp as an Ask model?\u003c\/strong\u003e\u003cbr\u003eProjector manufacturers frequently buy lamp engines from the same third-party suppliers, so it is common for models from different brands, like the Kindermann KX 525W and Ask's S-series, to share an identical lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 3400338501 a different lamp to 1300022500?\u003c\/strong\u003e\u003cbr\u003eNo, they are alternative codes for the same lamp. If your Esprit PST250X or Kindermann KX 525W documentation quotes 3400338501, that is the same part as 1300022500.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp fit the Ask S2325W specifically?\u003c\/strong\u003e\u003cbr\u003eYes, the S2325W is one of five Ask models listed against this lamp, alongside the S1290, S2235, S2295 and S2335, all sharing the identical 1300022500 bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a bare lamp or a full module?\u003c\/strong\u003e\u003cbr\u003eThis is the bare version: the bulb only, built to fit inside the housing already installed in your Acto, Ask, Esprit, Kindermann or SPECKTRON projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm this is the right lamp for my SPECKTRON?\u003c\/strong\u003e\u003cbr\u003eCheck whether your projector is the XL-235 or XL-240, both of which are listed against 1300022500. Other SPECKTRON models outside this pair may take a completely different lamp, so confirm the exact name.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182613770476,"sku":"LA-08067","price":135.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"seattlex30n-930-projector-lamp","title":"SEATTLEX30N-930 bare projector lamp","description":"\u003cp\u003eSEATTLEX30N-930 is a bare 230-watt bulb rated for 2000 hours, built for Boxlight's SEATTLE X30N and X30N-W, and the closely related Projector Write 2, sold under several near-identical spellings including ProjectorWrite2 and ProjectoWrite2. The same bulb is also listed for the Acto LX610, a rebadged version of the same projector.\u003c\/p\u003e\u003cp\u003eYou will see this projector's name spelled a few different ways, Projector Write 2, Projector Write 2\/W, ProjectorWrite2 and ProjectoWrite2, but they all take this one bulb. As a bare lamp, SEATTLEX30N-930 fits into the housing already inside your projector, so it is worth checking that housing for cracks or discolouration before you order.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 230 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08072\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 7 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does the Boxlight projector name appear spelled differently?\u003c\/strong\u003e\u003cbr\u003eBoxlight's Projector Write 2 has been listed under a few close variants, including ProjectorWrite2 and ProjectoWrite2, likely from different catalogue sources. They all refer to the same model and lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Acto LX610 really take a Boxlight-numbered lamp?\u003c\/strong\u003e\u003cbr\u003eYes, the Acto LX610 is built on the same projector platform as the Boxlight SEATTLE X30N, so it shares this identical bulb, despite carrying a different brand name on its case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the SEATTLE X30N-W lamp different from the standard X30N?\u003c\/strong\u003e\u003cbr\u003eNo, both the SEATTLE X30N and X30N-W take the same SEATTLEX30N-930 bulb; the W denotes a variant of the same body rather than a different lamp fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering SEATTLEX30N-930, will my current housing still be needed?\u003c\/strong\u003e\u003cbr\u003eYes. It is a bare bulb with no housing supplied, so it fits into the housing already inside your projector, provided that housing is undamaged and its clips are intact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the rated life of this bulb?\u003c\/strong\u003e\u003cbr\u003eSEATTLEX30N-930 carries a 2000-hour rating at 230 watts, in line with other mid-sized presentation projectors of its generation, though actual life will vary with how often the projector runs at full brightness.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182625403116,"sku":"LA-08072","price":270.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"313-400-0003-00-projector-lamp-module-la08057","title":"313-400-0003-00 projector lamp with module","description":"\u003cp\u003ePart 313-400-0003-00 is a complete lamp-with-module, pairing a 330W bulb rated for 2,000 hours with its own housing, so the whole unit swaps in as one piece. It's used across a wide spread of models, including Acto's LX and LW ranges, the Matrix 1500, and Parrot's XGA and OP0460 projectors.\u003c\/p\u003e\u003cp\u003eBecause these three brands often share the same underlying hardware, this single part number covers a long list of projector models rather than one or two; check your projector's exact model against the compatibility list before ordering. This lamp is also known by 3700161500, 001-821, 03-000710-01P and 104-642, so if you've seen any of those codes quoted elsewhere, they refer to the same part.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08057\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 25 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp part number cover so many projector models?\u003c\/strong\u003e\u003cbr\u003eActo, Matrix and Parrot projectors in this range share the same lamp and housing design, so a single module, 313-400-0003-00, fits all of them rather than each brand having its own separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the wattage and rated life of this lamp?\u003c\/strong\u003e\u003cbr\u003eIt's a 330W bulb with a rated life of 2,000 hours. Actual life depends on how the projector is used, including brightness settings and ventilation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eI've seen this lamp listed under a different code, is it the same part?\u003c\/strong\u003e\u003cbr\u003eLikely yes. This module is also sold as 3700161500, 001-821, 03-000710-01P and 104-642, all referring to the same lamp and housing. Quoting any of these when ordering points to the same listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the housing, or just the bulb?\u003c\/strong\u003e\u003cbr\u003eIt's a complete module, meaning the bulb comes fitted inside its housing ready to install as one unit, rather than needing your existing housing reused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy projector isn't listed by name, could this still fit?\u003c\/strong\u003e\u003cbr\u003eCheck the model against the full compatibility list first, since Acto, Matrix and Parrot use several near-identical model names across this range. If your exact model isn't listed, it's best to confirm before ordering rather than assume.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182626189548,"sku":"LA-08057","price":117.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/35374-xl.png?v=1786965280"},{"product_id":"acto-dx420-lamp-projector-lamp","title":"ACTO-DX420-LAMP Bare Projector Lamp","description":"\u003cp\u003eActo and LG share this DX420 lamp across seven projector models: Acto's AT-S55, AT-S56, AT-S58, AT-X2200, DS410 and DS415, plus LG's DX420. Rated at 230 watts with a 3000-hour life, the bulb is supplied bare, fitting into the housing already installed in any of these machines.\u003c\/p\u003e\u003cp\u003eThe two brands rebadge the same projector under different names, which is why one lamp code, ACTO-DX420-LAMP, covers both the Acto and LG ranges listed here. As a bare bulb, check your current housing's connector and reflector are undamaged, since the new bulb relies on that cage still being sound.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 230 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 3,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08058\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 7 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does one lamp cover both Acto and LG projectors?\u003c\/strong\u003e\u003cbr\u003eThe Acto AT-S55, AT-S56, AT-S58, AT-X2200, DS410 and DS415 share the same internal design as LG's DX420, so they all take the identical ACTO-DX420-LAMP bulb regardless of the badge on the case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which of the seven models I have?\u003c\/strong\u003e\u003cbr\u003eCheck the model plate on your projector body. It will show either an Acto model such as AT-S55 or DS410, or LG's DX420. All are covered by this same bare bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow hard does the ACTO-DX420-LAMP work, and for how long?\u003c\/strong\u003e\u003cbr\u003eIt runs at 230 watts with an expected life of 3000 hours, based on the lamp's own specification. Using an eco or economy picture mode where offered can help it reach the full rated hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a bare bulb or a housed module?\u003c\/strong\u003e\u003cbr\u003eIt is a bare bulb, meant to fit inside the housing already in your Acto or LG projector. It does not include a new cage or connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I safely dispose of the old Acto or LG bulb?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool before removing the old lamp, avoid touching the new bulb's glass with bare fingers, and dispose of the old one according to your local rules for projector lamps.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182629531884,"sku":"LA-08058","price":167.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/25951-lg.png?v=1786958665"},{"product_id":"3400608500-projector-lamp-module","title":"3400608500 projector lamp with module","description":"\u003cp\u003e3400608500 is a complete lamp module, bulb and housing together, used across eleven short-throw projectors from three brands: Acto's LX210ST, LX211ST, LX212ST, LX223ST, LX226ST and LX229ST, Parrot's LCD XGA HDMI 2600 ANSI and OP0452, and SPECKTRON's XL-231ST, XL-250ST and XL-280ST. These brands share rebadged hardware, which is why one lamp assembly serves all eleven models.\u003c\/p\u003e\u003cp\u003e3400608500 is the only code under which we list this module, so check it against your current lamp or projector documentation before ordering. Since the housing is included, this version suits projectors whose existing lamp cage is damaged; if your housing is still sound, a bare bulb version is also available for the same models.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08070\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 11 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do Acto, Parrot and SPECKTRON projectors share the same lamp?\u003c\/strong\u003e\u003cbr\u003eThese short-throw models are built on shared hardware sold under different brand names, so Acto, Parrot and SPECKTRON versions use the identical 3400608500 lamp assembly despite the different branding on the projector case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this module fit the Parrot OP0452 as well as the LCD XGA HDMI 2600 ANSI?\u003c\/strong\u003e\u003cbr\u003eYes. Both Parrot models listed, the OP0452 and the LCD XGA HDMI 2600 ANSI, take the same 3400608500 module, since Parrot sources this hardware from the same underlying platform as Acto and SPECKTRON.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I tell my SPECKTRON model apart from the others?\u003c\/strong\u003e\u003cbr\u003eSPECKTRON's short-throw range covers the XL-231ST, XL-250ST and XL-280ST, distinguished by the number in the model name. All three use this same 3400608500 module, so any of the three is compatible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bare bulb version of 3400608500 available?\u003c\/strong\u003e\u003cbr\u003eYes, a bare bulb edition of this lamp is also listed for the same range of Acto, Parrot and SPECKTRON projectors, for cases where your existing housing does not need replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering for one of the Acto LX models?\u003c\/strong\u003e\u003cbr\u003eConfirm your exact Acto model, such as LX210ST or LX229ST, against the list of compatible projectors, and check the part number 3400608500 against your current lamp if it is still legible.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182644179180,"sku":"LA-08070","price":123.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/26516-xl.png?v=1786958806"},{"product_id":"3400608500-projector-lamp","title":"3400608500 bare projector lamp","description":"\u003cp\u003eNine short-throw projectors take this bare bulb: Acto's LX210ST, LX211ST, LX212ST, LX223ST, LX226ST and LX229ST, plus SPECKTRON's XL-231ST, XL-250ST and XL-280ST. As a bare lamp it supplies the bulb only, fitting into the housing already installed in whichever of these projectors you own.\u003c\/p\u003e\u003cp\u003eThis bare bulb shares the code 3400608500 with the complete module version, but a housing is also available separately if the cage inside your Acto or SPECKTRON projector is cracked, scorched or has a failed connector. Fit the new bulb into your existing housing in the same orientation as the one removed.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08069\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 9 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy doesn't this listing include Parrot projectors like the module version does?\u003c\/strong\u003e\u003cbr\u003eThe bare bulb here is listed against nine Acto and SPECKTRON models. A separate module listing covers a wider set that also includes Parrot-branded projectors using the same underlying lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the bulb itself different from the module version?\u003c\/strong\u003e\u003cbr\u003eNo, the bulb is the same 3400608500 lamp used in the module listing; this version simply omits the housing, so you fit it into your existing cage instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich SPECKTRON models does this bare bulb fit?\u003c\/strong\u003e\u003cbr\u003eIt fits the SPECKTRON XL-231ST, XL-250ST and XL-280ST, alongside six Acto LX models built on the same short-throw hardware, all sharing the identical 3400608500 bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tools do I need to fit this bulb?\u003c\/strong\u003e\u003cbr\u003eMost Acto and SPECKTRON lamp housings open with a small screwdriver to release the retaining screws. Take care transferring the bulb, keeping it in the same orientation as the one you removed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I check that my LX model is one of the six listed?\u003c\/strong\u003e\u003cbr\u003eCompare the exact model printed on your Acto projector, such as LX212ST or LX223ST, against the six LX models listed here. Acto has used similar numbering across other ranges, so an exact match matters.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182644736236,"sku":"LA-08069","price":190.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"3700161500-projector-lamp","title":"3700161500 bare projector lamp","description":"\u003cp\u003e3700161500 is a bare 330-watt bulb rated for 2,000 hours, used across a wide range of Acto and Parrot projectors, from the compact LW216 and LX212 through to larger installation models such as the LX900. Twenty-four projectors in total share this single lamp specification.\u003c\/p\u003e\u003cp\u003eGiven the size of this compatibility list, check your exact model name, whether an Acto LX600-series unit or a Parrot OP0460 or LCD XGA 2500 ANSI, against the list before ordering. As a bare bulb, 3700161500 fits into the housing your projector already has rather than arriving with a new cage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 330 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08056\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 24 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow can one lamp fit twenty-four different projector models?\u003c\/strong\u003e\u003cbr\u003eActo and Parrot have both built multiple ranges around the same lamp specification, 330 watts with a 2,000-hour rating, so models from the entry-level LX212 to larger units like the LX900 all share 3700161500.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this bulb fit the Parrot OP0460?\u003c\/strong\u003e\u003cbr\u003eYes, the Parrot OP0460 and the Parrot LCD XGA 2500 ANSI both take this bulb, alongside the wider Acto range listed here, from the compact LX212 through to the larger LX900.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMy Acto model has a W in its name, like LX650W. Does that change compatibility?\u003c\/strong\u003e\u003cbr\u003eNo. Widescreen variants such as LX650W, LX660W and LX675W use the same 3700161500 bulb as their standard counterparts, so the W in the model name makes no difference to the lamp you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is no housing included with this listing?\u003c\/strong\u003e\u003cbr\u003eThis listing is for the bare bulb only. Given how many projector models share this lamp, most housings across the range differ slightly, so the bulb is sold separately for fitting into your existing cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the specs of 3700161500 vary across the Acto and Parrot range?\u003c\/strong\u003e\u003cbr\u003eNo. It runs at 330 watts with a 2,000-hour rated life across all twenty-four compatible Acto and Parrot models, so the figures are the same whichever projector you own.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182645358828,"sku":"LA-08056","price":155.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"lmp18959-projector-lamp-module","title":"LMP18959 projector lamp with module","description":"\u003cp\u003eThe Acto AT-X8450 and Boxlight MP-65e, MP-75e and MP65e share LMP18959, a housed lamp module rated at 275 watts with a 2000-hour life. The complete unit, bulb and housing together, replaces the lamp assembly as a single part rather than a bulb on its own.\u003c\/p\u003e\u003cp\u003eThe same lamp is also listed under the code MP65E-930, so check your old module or the projector's rating label for either number before ordering. Because this version includes the housing, it is worth choosing over the bare-bulb equivalent if your existing cage shows cracks, discolouration or damaged contacts.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 275 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08526\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 6 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes LMP18959 fit both the Acto AT-X8450 and Boxlight MP65e?\u003c\/strong\u003e\u003cbr\u003eYes, both are listed against LMP18959, along with the Boxlight MP-75e. Acto and Boxlight have sold closely related projector ranges under this lamp code, so the same module covers models from either brand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs MP65E-930 a different lamp to LMP18959?\u003c\/strong\u003e\u003cbr\u003eNo, MP65E-930 is simply an alternate reference for the same lamp as LMP18959. Either code appearing on your old unit or your projector's documentation confirms this listing is the correct replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I choose the module version over the bare bulb?\u003c\/strong\u003e\u003cbr\u003eChoosing the module makes sense if your existing housing is cracked, has a damaged connector, or you would rather not handle the bare bulb directly. The bare-bulb version of LMP18959 is listed separately for projectors with sound housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the expected lamp life for LMP18959?\u003c\/strong\u003e\u003cbr\u003eLMP18959 is rated for 2000 hours at 275 watts under standard use. How long it actually lasts depends on the projector's ventilation, ambient temperature and how frequently it is powered on and off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the quickest way to check LMP18959 suits my Acto or Boxlight projector?\u003c\/strong\u003e\u003cbr\u003eCompare your projector's model number against the Acto AT-X8450, Acto MP65E-930 or Boxlight MP-65e, MP-75e and MP65e listed here, and check the code on your old lamp against LMP18959 or MP65E-930.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182654664940,"sku":"LA-08526","price":192.47,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34801-xl.png?v=1786964291"},{"product_id":"seattlex30n-930-projector-lamp-module","title":"SEATTLEX30N-930 projector lamp with module","description":"\u003cp\u003eSEATTLEX30N-930 is a housed lamp module built for the Boxlight Seattle X26N and SEATTLE X30N ranges, the ProjectorWrite2 and Projector Write 2 models, the Acto LX610 and the Jector S25. Rated at 230 watts with a 2000-hour life, it covers ten projectors sold under three different brand names for what is largely the same platform.\u003c\/p\u003e\u003cp\u003eOlder stock may carry the code Seattle X26N-930, sometimes marked SHP, or simply X26N-930, all of which point to this same lamp. Since Acto, Boxlight and Jector versions of these projectors share a common design, check your model name carefully rather than assuming the brand alone determines the right lamp.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage\u003c\/strong\u003e — 230 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated life\u003c\/strong\u003e — 2,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08073\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 10 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the Jector S25 take the same lamp as the Boxlight Seattle X30N?\u003c\/strong\u003e\u003cbr\u003eYes, SEATTLEX30N-930 covers both, along with the Acto LX610 and several Boxlight ProjectorWrite and Seattle models. These projectors share a common lamp platform across the three brands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SHP marking on Seattle X26N-930 mean?\u003c\/strong\u003e\u003cbr\u003eSHP refers to the lamp technology used inside some versions of this bulb. Seattle X26N-930 (SHP) and Seattle X26N-930 without the marking both refer to the same lamp as SEATTLEX30N-930.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many projectors does this lamp code cover?\u003c\/strong\u003e\u003cbr\u003eSEATTLEX30N-930 is listed against ten projectors across Acto, Boxlight and Jector, including the Seattle X26N, SEATTLE X30N, ProjectorWrite2 and ProjectoWrite2 spellings, the Acto LX610 and the Jector S25.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes SEATTLEX30N-930 replace the housing along with the bulb?\u003c\/strong\u003e\u003cbr\u003eYes, SEATTLEX30N-930 is a complete module, with the bulb already mounted in its housing. It is fitted as a single unit rather than requiring the old housing to be reused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy do some projector names on this list look slightly different?\u003c\/strong\u003e\u003cbr\u003eSome models appear under slightly different names, such as Boxlight ProjectorWrite2 and ProjectoWrite2, or Seattle X26N and SEATTLE X30N. Check your projector's rating label directly rather than relying on the model name alone.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182656762092,"sku":"LA-08073","price":121.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/34786-xl.png?v=1786964304"},{"product_id":"acto-shx6500-projector-lamp","title":"Acto SHX6500 bare projector lamp","description":"\u003cp\u003eNo part code is published for this lamp, so it is listed by the projector it fits, the Acto SHX6500. It is a bare bulb, meaning it replaces only the lamp itself, fitted into the housing your SHX6500 already carries.\u003c\/p\u003e\u003cp\u003eSince there is no code to check, confirm your projector's model badge reads SHX6500 before ordering. Once the old bulb is removed, look over the housing for cracking, scorch marks or a loose connector before deciding whether it is worth reusing with this new bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08084\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the SHX6500 lamp the same as other Acto SHX models?\u003c\/strong\u003e\u003cbr\u003eThis bulb is listed specifically for the SHX6500. Acto's SHX range includes other model numbers, such as the SHX6000, which have their own separate listings, so check your exact model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is there no wattage listed for this lamp?\u003c\/strong\u003e\u003cbr\u003eA wattage figure has not been published for this bulb, so it is left out rather than estimated. The projector model, SHX6500, is the reference to use for confirming fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing include a new housing?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare bulb for the SHX6500. It fits into the lamp cage already installed inside your projector rather than replacing the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow urgent is it to replace a dimming lamp in the SHX6500?\u003c\/strong\u003e\u003cbr\u003eA dimming image is usually a sign the bulb is nearing the end of its life rather than an immediate fault. Replacing it before it fails completely avoids an unplanned outage during use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the safest way to remove the old bulb from the SHX6500?\u003c\/strong\u003e\u003cbr\u003eAllow the projector to cool fully, then open the lamp access panel as described in the SHX6500's manual. Handle the old bulb by its base and avoid touching the glass.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182674981100,"sku":"LA-08084","price":370.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-shx6000-projector-lamp","title":"Acto SHX6000 bare projector lamp","description":"\u003cp\u003eThe Acto SHX6000 has no published lamp part number, so this bare bulb is identified by the projector name instead. It supplies the bulb only, meant for fitting into the housing your SHX6000 already has rather than a full module replacement.\u003c\/p\u003e\u003cp\u003eMatch your projector's exact model badge against SHX6000 before ordering, since Acto's SHX line includes other numbers such as the SHX6500 with their own separate listings. Once removed, check the old housing for cracks or scorching before fitting the new bulb into it.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08083\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow does the SHX6000 differ from the SHX6500 for lamp purposes?\u003c\/strong\u003e\u003cbr\u003eThey are separate models within Acto's SHX range and each has its own bulb listing. Confirm your projector reads SHX6000 specifically rather than assuming the two are interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFor the SHX6000, is the lamp cage part of this purchase?\u003c\/strong\u003e\u003cbr\u003eNo. This listing is a bare bulb, fitted into the existing lamp cage inside your SHX6000 rather than supplied with a new one, so that cage must remain serviceable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't a lamp life figure shown for this bulb?\u003c\/strong\u003e\u003cbr\u003eNo hours rating is currently published for this lamp, so none is listed rather than estimated. Dimming brightness or a lamp warning on the SHX6000 is a more reliable sign that replacement is due.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I inspect before reusing the SHX6000's housing?\u003c\/strong\u003e\u003cbr\u003eCheck for cracked plastic, scorch marks near the bulb socket and a connector that seats firmly. A housing showing any of these signs is unlikely to hold a new bulb securely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I order this lamp using a part number instead of the projector name?\u003c\/strong\u003e\u003cbr\u003eNo part number is published for this lamp, so it can only be ordered by matching the projector model, Acto SHX6000, rather than a code.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182675144940,"sku":"LA-08083","price":370.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-lx8290-projector-lamp","title":"Acto LX8290 bare projector lamp","description":"\u003cp\u003eThis bare bulb fits the Acto LX8290 and is listed by that projector name since Acto has not published a specific part code for it. It supplies the bulb alone, to be fitted inside the lamp housing already installed in your LX8290.\u003c\/p\u003e\u003cp\u003eSince no part number exists to check, confirm the model printed on your projector reads LX8290 before ordering. Once removed, inspect the old housing for cracking, discolouration or a loose connector, as a damaged cage will not hold a new bulb securely.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08078\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy is this Acto lamp listed without a part code?\u003c\/strong\u003e\u003cbr\u003eActo has not made a specific part number publicly available for the LX8290's lamp, so it is identified by the projector name instead, which is what to match against your unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this the bulb only, or does it include a housing?\u003c\/strong\u003e\u003cbr\u003eThis is a bare bulb for the LX8290. It is fitted into the housing already inside your projector rather than arriving with a new cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I remove the old bulb from the LX8290 safely?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool completely before opening the lamp access panel. Handle the old bulb by its base rather than the glass, since oils from skin can weaken glass under heat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre there other Acto models with a similar name to check I'm not confusing them?\u003c\/strong\u003e\u003cbr\u003eActo's LX range includes several similarly numbered models, so confirm your projector reads LX8290 exactly, since a close but different model number will use a different lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy don't you list a wattage for this lamp?\u003c\/strong\u003e\u003cbr\u003eA wattage figure is not currently available for the LX8290's bulb, so we leave it out rather than publish a guess. The projector model remains the most reliable way to confirm you are ordering the right lamp.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182675341548,"sku":"LA-08078","price":370.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-lw6100-projector-lamp","title":"Acto LW6100 bare projector lamp","description":"\u003cp\u003eBuilt specifically for the Acto LW6100, this bare bulb is listed under the projector name because Acto has not published a specific part code for its lamp. It replaces the bulb only, fitting into the housing already installed inside your LW6100.\u003c\/p\u003e\u003cp\u003eWith no part number to check, confirm the model badge on your projector reads LW6100 before ordering. Once the old bulb is out, examine the housing for cracked plastic or a loose connector before deciding whether it is fit to reuse with the new bulb.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08065\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the LW6100 lamp interchangeable with the LW8180?\u003c\/strong\u003e\u003cbr\u003eNo. Each Acto LW model is listed separately, so check that your projector reads LW6100 specifically rather than assuming compatibility with a differently numbered model in the same range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LW6100 bulb ship inside a new cage?\u003c\/strong\u003e\u003cbr\u003eIt does not. This is a bare bulb that fits into the lamp cage already inside your LW6100 rather than replacing the housing itself, so retain that cage during the swap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know the bulb needs replacing rather than something else being at fault?\u003c\/strong\u003e\u003cbr\u003eA steadily dimming or discoloured image, or a lamp warning indicator on the LW6100, usually points to the bulb rather than another fault. Persistent flickering that continues after fitting a replacement bulb would suggest checking the connection or power supply instead, since the lamp itself is not always the cause.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is no wattage published for this bulb?\u003c\/strong\u003e\u003cbr\u003eA wattage figure is not currently available for the LW6100's lamp, so it has been left off this listing rather than estimated. The projector model itself remains the reliable reference for ordering the correct bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tools will I need to fit this bulb?\u003c\/strong\u003e\u003cbr\u003eMost Acto LW-series housings open with a small screwdriver to release the panel or retaining screws. Handle the bulb by its base and keep it in the same orientation as the one removed.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182675505388,"sku":"LA-08065","price":370.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-lw8180-projector-lamp","title":"Acto LW8180 bare projector lamp","description":"\u003cp\u003eThe Acto LW8180 takes this bare bulb, listed by projector name because no manufacturer part code has been published for it. As a bare lamp, it supplies the bulb only, to be fitted inside the housing your LW8180 already has rather than a new cage.\u003c\/p\u003e\u003cp\u003eCheck that your projector's model reads LW8180 before ordering, since there is no code here to confirm the match. Once the old bulb has been removed, look over its housing for scorching or cracked plastic before fitting the replacement bulb into the same cage.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08066\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp shared with any other Acto LW model?\u003c\/strong\u003e\u003cbr\u003eNo, this bulb is listed specifically for the LW8180. Other LW models, such as the LW6100, have their own separate listings, so always match your exact projector name before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LW8180 lamp come as a full module?\u003c\/strong\u003e\u003cbr\u003eThis particular listing is a bare bulb only. It fits into the housing already installed in your LW8180 rather than arriving with a new cage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow can I tell if it's the bulb that's failed rather than something else?\u003c\/strong\u003e\u003cbr\u003eA projector that powers on but shows no image, or displays a lamp fault light, usually points to the bulb. Persisting issues after fitting a new one would suggest checking the connection or power supply instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't a lamp life rating shown?\u003c\/strong\u003e\u003cbr\u003eNo hours figure is currently published for the LW8180's bulb, so none is listed rather than estimated. A gradually dimming image is the more practical sign that a replacement is due.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat precautions should I take when fitting the new bulb?\u003c\/strong\u003e\u003cbr\u003eAllow the LW8180 to cool fully first, avoid touching the bulb's glass with bare hands, and seat it in the housing in the same orientation as the bulb you removed before closing the cage.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182675701996,"sku":"LA-08066","price":370.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-lu6000-projector-lamp","title":"Acto LU6000 bare projector lamp","description":"\u003cp\u003eThe Acto LU6000's lamp carries no published part code, so this bare bulb is listed under the projector name instead. It supplies the bulb only, fitted into the lamp housing your LU6000 already carries rather than a complete new assembly.\u003c\/p\u003e\u003cp\u003eConfirm your projector's model badge reads LU6000 before ordering, since there is no part number here to check against. Once the old bulb is removed, inspect the housing for cracking, scorch marks or a connector that no longer seats firmly before reusing it.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08064\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy do so many Acto lamps in this catalogue have no part number?\u003c\/strong\u003e\u003cbr\u003eActo has not published specific part codes for every model it sells, including the LU6000. Where that is the case, we list the lamp by the projector it fits so ordering still stays straightforward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs anything besides the bulb supplied for the LU6000?\u003c\/strong\u003e\u003cbr\u003eNo, this is a bare bulb for the LU6000, fitted into the housing already installed inside your projector rather than replacing the cage, which stays where it is.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between the LU6000 and other Acto L-prefixed models?\u003c\/strong\u003e\u003cbr\u003eActo uses different prefixes, such as LU, LW and LX, to distinguish its projector ranges. Each carries its own lamp listing, so confirm your projector reads LU6000 specifically rather than a similarly prefixed model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does a bulb like this typically last?\u003c\/strong\u003e\u003cbr\u003eNo hours rating is published for the LU6000's bulb, so we have not listed one. Watching for dimming brightness or a lamp warning light is the best guide to when a replacement is due.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before switching the LU6000 back on after fitting the new bulb?\u003c\/strong\u003e\u003cbr\u003eMake sure the lamp housing is fully closed and seated, since many projectors will not power the lamp, or will show an error, if the housing is not detected as properly latched.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182675865836,"sku":"LA-08064","price":370.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-cx6200-projector-lamp","title":"Acto CX6200 bare projector lamp","description":"\u003cp\u003eActo's CX6200 projector takes a bare lamp rather than a lamp-and-housing module, so this listing is the bulb on its own. We identify it by the projector it fits, since Acto has not issued a separate part number for this lamp. Fit it into your existing housing once the old bulb has cooled.\u003c\/p\u003e\u003cp\u003eBecause there is no manufacturer part code attached to this lamp, ordering by projector name is the safest way to get the right one for a CX6200. As a bare lamp it slots into the housing you already have; nothing needs to be swapped except the bulb itself. Check your projector's model plate reads CX6200 before you order.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08061\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhen replacing the CX6200's lamp, is the cage swapped too?\u003c\/strong\u003e\u003cbr\u003eNo. This is a bare lamp only; the CX6200 uses a reusable lamp-and-housing design, so the bulb goes into the housing already in your projector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know this is the right lamp for my projector?\u003c\/strong\u003e\u003cbr\u003eCheck the model plate on your Acto projector reads CX6200. This listing is matched specifically to that model, so a lamp bought for a different Acto projector will not fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this lamp in other Acto projectors?\u003c\/strong\u003e\u003cbr\u003eThis listing is matched to the CX6200 only. Acto's other models use their own lamp assemblies, so check your own model plate rather than assuming a lamp from a similar-sounding unit will fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the lamp need to be reset after fitting?\u003c\/strong\u003e\u003cbr\u003eMost Acto projectors track lamp hours internally and will prompt you to reset the counter through the on-screen menu once the new bulb is fitted. Check your projector's manual for the exact menu path.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs shipping included with this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, shipping on this lamp is free worldwide, so the price shown is what you pay at checkout with no separate delivery charge added for the CX6200 bulb.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182676127980,"sku":"LA-08061","price":370.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-cw6000-projector-lamp","title":"Acto CW6000 bare projector lamp","description":"\u003cp\u003eThe CW6000 from Acto is a projector that takes a bare lamp rather than a full module, and this listing is that bulb on its own. There is no separate part number issued for it, so we identify the lamp by the projector name. Fit it into the housing you already have once the unit has cooled.\u003c\/p\u003e\u003cp\u003eSince Acto has not released an individual code for this bulb, matching it to your CW6000 by projector name avoids ordering the wrong lamp. It is a bare bulb, so the swap involves only the lamp itself, not the surrounding housing. Confirm the model plate on your unit reads CW6000 before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08060\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy is there no part number listed for the CW6000 lamp?\u003c\/strong\u003e\u003cbr\u003eActo has not published an individual part code for this bulb. We identify it by the projector it fits so you can match it to a CW6000 with confidence rather than guessing at a code.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CW6000 replacement arrive housed or as glass only?\u003c\/strong\u003e\u003cbr\u003eGlass only. It is a bare lamp, and the CW6000 reuses its existing housing, so you fit this bulb into the assembly already inside your projector rather than replacing the whole unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CW6000 share a lamp with other Acto models?\u003c\/strong\u003e\u003cbr\u003eThis listing is matched to the CW6000 specifically. Other Acto projectors in the same range use their own lamp assemblies, so check the model plate on your unit before ordering rather than assuming a shared bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before fitting a replacement bulb?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully before opening the lamp compartment, and confirm the model on the plate matches CW6000. Handling the bulb by its housing edges rather than the glass reduces the risk of shortening its life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing include worldwide shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Shipping on the CW6000 lamp is free worldwide, so the listed price is the full cost with nothing added for delivery at checkout, wherever you are ordering from.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182676324588,"sku":"LA-08060","price":370.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-lx6500-projector-lamp","title":"Acto LX6500 bare projector lamp","description":"\u003cp\u003eNo separate part number exists for the lamp used in an Acto LX6500, so this bare bulb is listed against the projector itself. It fits inside the housing your LX6500 already has, replacing only the failed lamp rather than the whole assembly. There is one lamp for one projector here, no shared code across models.\u003c\/p\u003e\u003cp\u003eSince Acto has not issued an individual code for the LX6500's lamp, matching by projector name is how to be sure you are ordering correctly. This bare bulb only replaces the lamp itself, so the housing already fitted to your projector stays in place. Double-check the model plate reads LX6500 before completing your order.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08075\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy doesn't the LX6500 lamp have its own part number?\u003c\/strong\u003e\u003cbr\u003eActo has not published an individual code for this bulb, so we identify it by the projector it fits, the LX6500, rather than by a manufacturer part number that doesn't exist.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the LX6500 lamp interchangeable with other Acto LX models?\u003c\/strong\u003e\u003cbr\u003eNo, this listing is matched specifically to the LX6500. Other LX-series Acto projectors take their own lamps, so check your model plate rather than assuming lamps are shared across the range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a new housing with this lamp?\u003c\/strong\u003e\u003cbr\u003eNo. This is a bare bulb designed to fit inside the housing already in your LX6500, so only the lamp itself needs replacing, not the surrounding assembly or mounting frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reset the lamp counter after fitting a new bulb?\u003c\/strong\u003e\u003cbr\u003eMost Acto projectors let you reset the lamp-hour counter from the on-screen menu after the new bulb is fitted; check your LX6500's manual for the exact menu path, since it varies between firmware versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs shipping free on this lamp?\u003c\/strong\u003e\u003cbr\u003eYes, shipping is free worldwide on the LX6500 lamp, so the price shown at checkout is the full cost with nothing added for delivery, wherever the order is heading.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182680912108,"sku":"LA-08075","price":370.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-lx6100-projector-lamp","title":"Acto LX6100 bare projector lamp","description":"\u003cp\u003eAn Acto LX6100 takes this bare lamp in place of the bulb originally fitted, with no manufacturer part code issued for it, so it is listed by projector name instead. Fitting is a straightforward bulb swap into your existing housing, since this is not a module. One listing, one projector: the LX6100 alone.\u003c\/p\u003e\u003cp\u003eWith no individual part code available for the LX6100's lamp, ordering by projector name is the only reliable way to match it. This bare bulb replaces just the lamp; the housing built into your LX6100 stays as it is. Confirm the model plate on your unit reads LX6100 before you order.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08074\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the LX6100 lamp carry a manufacturer part number?\u003c\/strong\u003e\u003cbr\u003eNo, Acto has not issued a separate code for this bulb. We list it by the projector it fits, the LX6100, so you can match it with confidence.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a lamp bought for the LX6500 fit the LX6100?\u003c\/strong\u003e\u003cbr\u003eNo, each listing here is matched to a specific Acto model. The LX6100 and LX6500 are different projectors with their own lamps, so check your model plate rather than assuming the two are interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp bare or a complete module?\u003c\/strong\u003e\u003cbr\u003eIt's a bare lamp only, meant to fit inside the housing already in your LX6100 rather than replace the housing or mounting frame. If your housing itself is damaged, a bare lamp will not resolve that.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I avoid mixing up the LX6100 with its Acto siblings?\u003c\/strong\u003e\u003cbr\u003eCheck the model plate on your projector reads LX6100 exactly, since Acto uses closely named models across its LX range that are not interchangeable with each other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing ship worldwide at no extra cost?\u003c\/strong\u003e\u003cbr\u003eYes, shipping is free worldwide, so the price you see for the LX6100 lamp is the full amount charged at checkout, with no delivery fee added afterwards, anywhere it is sent.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182681108716,"sku":"LA-08074","price":370.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-acto-lx5200-lamp-projector-lamp-module","title":"ACTO-LX5200-LAMP lamp and housing module","description":"\u003cp\u003eWhere the ACTO-LX5200-LAMP bare bulb needs an existing housing, this listing pairs the same lamp with a new housing as a complete module, ready to drop into an AT-X5200, AT-X5300, AT-X5350 or AT-X8280 without reusing the old assembly. No individual part number is issued for the module, so it's identified by the projector range it serves.\u003c\/p\u003e\u003cp\u003eChoosing the module over the bare lamp makes sense if your existing housing is damaged, cracked or has failed mounting tabs, since this version replaces both parts together. It fits the same four Acto projectors as the bare lamp, the AT-X5200, AT-X5300, AT-X5350 and AT-X8280, so check your model plate matches one of those before ordering.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12161\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 5 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between this listing and the bare ACTO-LX5200-LAMP?\u003c\/strong\u003e\u003cbr\u003eThis one includes a new housing built around the lamp, so it replaces the whole assembly rather than just the bulb. Choose it if your current housing is damaged; otherwise the bare lamp alone is enough.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the module fit all four AT-X projectors?\u003c\/strong\u003e\u003cbr\u003eYes, this module is built for the same range as the bare lamp: the AT-X5200, AT-X5300, AT-X5350 and AT-X8280, so one listing covers all four Acto models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is there no part number for this module?\u003c\/strong\u003e\u003cbr\u003eActo has not issued a separate code for the module version, so we identify it by the AT-X projector range it fits rather than by a part number that doesn't exist.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I buy the module if only the bulb has failed?\u003c\/strong\u003e\u003cbr\u003eNot necessarily, if your existing housing is intact, the bare ACTO-LX5200-LAMP lamp is the cheaper option since it reuses what you already have. The module is aimed at housings that are damaged or missing parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs fitting a full module more involved than fitting a bare bulb?\u003c\/strong\u003e\u003cbr\u003eIt typically means removing the old housing assembly entirely rather than just swapping a bulb inside it, so allow a little more time and follow your projector's manual for the housing-release steps.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182681272556,"sku":"LA-12161","price":281.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-acto-lx228-lamp-projector-lamp-module","title":"Acto LX228 lamp and housing module","description":"\u003cp\u003eThis listing pairs the LX228's lamp with a new housing as a complete module, an alternative to the bare bulb sold separately for the same projector. There is no individual part number for the module, so it is identified by the LX228 itself. Fit it as a full assembly rather than a bulb-only swap.\u003c\/p\u003e\u003cp\u003eA module makes sense when the housing already fitted to your LX228 is cracked, has broken mounting tabs, or you would rather not handle the bulb directly during fitting. It replaces both housing and lamp together, unlike the bare version of this same lamp. Confirm your projector reads LX228 on its model plate first.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12160\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat's the benefit of buying the module instead of the bare lamp?\u003c\/strong\u003e\u003cbr\u003eThe module includes a new housing, so it's the better choice if your existing housing is cracked or its mounting tabs have broken. If the housing is fine, the bare LX228 lamp alone is the cheaper option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this module fit the LX228 only?\u003c\/strong\u003e\u003cbr\u003eYes, this listing is matched specifically to the LX228. It is not shared with other Acto projectors in the catalogue, so it will not fit a different model even from the same range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a manufacturer code for this module?\u003c\/strong\u003e\u003cbr\u003eNo, Acto has not issued a separate part number for the module version, so it's listed under the LX228 projector name instead of a manufacturer code you could search for elsewhere online.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is fitting a module different from fitting a bare bulb?\u003c\/strong\u003e\u003cbr\u003eYou remove and replace the entire housing assembly rather than just the lamp inside it, so the process usually takes a little longer but avoids handling the bulb directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs shipping free on the LX228 module?\u003c\/strong\u003e\u003cbr\u003eYes, shipping is free worldwide, so the listed price for the LX228 module is the full amount charged at checkout, with nothing added afterwards for delivery to any destination.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182681501932,"sku":"LA-12160","price":60.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/37076-xl.png?v=1786965722"},{"product_id":"acto-lmp-rac400-projector-lamp-module","title":"Acto RAC400 lamp and housing module","description":"\u003cp\u003eActo's RAC400 projector is served by this lamp-and-housing module, listed under the code LMP-RAC400 even though no separate manufacturer part number has been issued for it. It replaces the lamp and its housing together, rather than just the bulb. One module, one projector: the RAC400.\u003c\/p\u003e\u003cp\u003eBecause this is a full module, fitting it replaces the housing as well as the lamp, which is useful if your current housing has cracked or its latch mechanism has failed. Match your projector's model plate against RAC400 before ordering, since Acto's naming across its projector range is not always obvious from the outside.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Projector Lamp with Module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-12162\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 2 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy is this listed as LMP-RAC400 if there's no part number?\u003c\/strong\u003e\u003cbr\u003eLMP-RAC400 reflects how the lamp is commonly referred to for the RAC400 projector, but Acto has not published an official standalone code for the module, so we match it by projector name to be accurate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this module fit only the RAC400?\u003c\/strong\u003e\u003cbr\u003eYes, this listing is matched specifically to Acto's RAC400 and is not shared with other projectors in the catalogue, so check your model plate reads RAC400 before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bare bulb version of this lamp available separately?\u003c\/strong\u003e\u003cbr\u003eNot in this batch of listings, for the RAC400, the module is the version available, pairing the lamp with a new housing rather than a bulb-only option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I inspect before fitting the module?\u003c\/strong\u003e\u003cbr\u003eCheck that the new housing's mounting tabs line up with your RAC400's lamp compartment before pushing it fully home, and make sure the projector has been off and cooled first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs delivery free on this module?\u003c\/strong\u003e\u003cbr\u003eYes, shipping is free worldwide on the RAC400 module, so nothing is added to the listed price at checkout regardless of where the order is being delivered to.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182681633004,"sku":"LA-12162","price":64.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/37221-xl.png?v=1786965771"},{"product_id":"acto-lx6900-projector-lamp","title":"Acto LX6900 bare projector lamp","description":"\u003cp\u003eFitting an Acto LX6900 means this bare bulb goes straight into the housing you already have, since no separate part number exists for the lamp on its own. It is listed under the projector's name rather than a manufacturer code, and is matched to the LX6900 alone rather than a wider range.\u003c\/p\u003e\u003cp\u003eThere is no individual code to search for with this lamp, so matching by projector name, LX6900, is how you confirm you are ordering the right bulb. It is bare, meaning only the lamp is replaced, with your existing housing staying in place. Check the model plate before completing checkout.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08076\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs there a manufacturer part code for the LX6900 lamp?\u003c\/strong\u003e\u003cbr\u003eNo, Acto has not issued one, so this bulb is listed under the LX6900 projector name instead of a code, in the same way as several other Acto lamps in this range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this lamp be used in an LX6500 or LX6100 as well?\u003c\/strong\u003e\u003cbr\u003eNo, each of these is a separate listing matched to its own Acto model. The LX6900's lamp is not interchangeable with the LX6500 or LX6100 even though the names are similar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a bare bulb or a module with housing?\u003c\/strong\u003e\u003cbr\u003eIt is a bare bulb, so fitting it means placing it inside the housing already built into your LX6900 rather than replacing that housing, which stays exactly as it was before.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I clear the lamp warning after fitting a new bulb?\u003c\/strong\u003e\u003cbr\u003eMost Acto units let you reset the lamp counter through the projector's on-screen menu once the new bulb is in place; the exact steps vary, so check your LX6900's manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this lamp ship free worldwide?\u003c\/strong\u003e\u003cbr\u003eYes, shipping is free worldwide, and the listed price for the LX6900 lamp is the full amount you pay, with no delivery charge added at checkout for any destination.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182681731308,"sku":"LA-08076","price":370.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"},{"product_id":"acto-shw6000-projector-lamp","title":"Acto SHW6000 bare projector lamp","description":"\u003cp\u003eThe SHW6000 is one of the Acto projectors whose lamp carries no individual part number, so this bare bulb is identified by the projector itself rather than a code. It fits inside the housing already built into your SHW6000, replacing only the lamp. This listing is matched to the SHW6000 alone.\u003c\/p\u003e\u003cp\u003eWithout a manufacturer code to check against, confirming the model plate on your projector reads SHW6000 is the way to be sure this lamp is the right match. As a bare bulb it swaps in place of the failed lamp, leaving your existing housing untouched. Order against the projector name shown here.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e — Bare Projector Lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e — LA-08082\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e — 1 projector models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy isn't there a part number for the SHW6000 lamp?\u003c\/strong\u003e\u003cbr\u003eActo has not published an individual code for this bulb, so we list it against the SHW6000 projector itself to keep the match accurate for anyone placing an order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SHW6000 use the same lamp as other Acto models?\u003c\/strong\u003e\u003cbr\u003eNo, this listing is specific to the SHW6000. Acto's other projectors in this range, such as the LX and CX series, use their own separate lamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this lamp supplied with a new housing?\u003c\/strong\u003e\u003cbr\u003eNo, it's a bare bulb only, designed to fit into the housing already inside your SHW6000 rather than replace it, so the existing housing stays exactly as it is.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the safest way to handle the new bulb during fitting?\u003c\/strong\u003e\u003cbr\u003eLet the projector cool fully before opening the lamp compartment, and hold the bulb by its housing edges rather than the glass to avoid leaving oils that can shorten its life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs worldwide shipping included in the price?\u003c\/strong\u003e\u003cbr\u003eYes, shipping is free worldwide on the SHW6000 lamp, so the price shown here is the full cost at checkout, with nothing added afterwards for delivery to any country.\u003c\/p\u003e","brand":"Lamps Authority","offers":[{"title":"Default Title","offer_id":48182681829612,"sku":"LA-08082","price":370.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/5535\/8700\/files\/generic-bigbulb.png?v=1786970157"}],"url":"https:\/\/www.lampsauthority.com\/collections\/acto-projector-lamps.oembed","provider":"Lamps Authority","version":"1.0","type":"link"}